Schneider Electric is a company specializing in energy management and automation, present in over 100 countries. It offers integrated solutions for various market segments.
The company's objective is to allow everyone to make the best use of energy and resources, combining progress and sustainability.
At Schneider they call this philosophy Life Is On
Schneider Electric Wireless PowerTag F63A 3PN upstream downstream A9MEM1570 PowerTag Energy F63 1P+N 110V is a wireless communication energy sensor. With its Flex design, it is dedicated to 3P+N devices, with rated current less than or equal to 63 A. It must be associated with a concentrator or gateway to provide circuit monitoring and diagnosis up to the load level. It is designed specifically for energy management, load monitoring and power availability applications. Includes accurate real-time measurements of active energy, active power, and voltage and power factor. In case of power failure, it sends voltage loss alarm and current value per phase before shutting down. PowerTag Energy 63A complies with IEC 61557-12. It's a PMD-i/DD/K55/1. The performance category is class 1. The maximum current of Imax is 63 A. The Base current Ib is 10 A. The saturation current is 130 A and the starting current Ist is 40 mA. The rated voltage Un is phase to neutral from 220VAC to 240VAC +/- 20% and phase to phase from 380VAC to 415VAC +/- 20%. The maximum consumption is less than or equal to 2 VA. It can be mounted on the top or bottom of the protection device. The color of the product is white (RAL 9003). The weight is 40 g. The degree of protection is IP20 and IK05. The operating temperature is between -25°C and +60°C. The storage temperature is between -40°C and +85°C. Mounting System With Screws: (clamps)Electrical Connection (VoltageSensing & Power Supply): Cables with cable endsWire Section: 1 rigid cable 1.5…16 mm²2 stranded cable 1.5…2.5 mm²2 rigid cable 1.5…2.5 mm²1 stranded cable 1.5…16 mm²Cable length: 0 ,25 mSupply Voltage: 220...240 V AC, +/- 20 %, phase to neutral380...415 V AC, +/- 20 %, phase to phaseMains Frequency: 50 Hz60 HzMaximum Power Consumption: 2 VAReference Standards: IEC 61557-12IEC 61010-1IEC 61010-2-030IEC 61326-1ETSI EN 300 328ETSI EN 301 487-1Height Sensing element: 20 mmWidth Sensing element: 54 mmDepth Sensing element: 46.6 mm
€190,20
Schneider-Electric Controller M241 24 I/O TR PNP ETH TM241CE24T It is a logic controller with a rated supply/output voltage of 24V DC, an output current of 0.5A for transistor output, 0.1A for fast output current with sink or source input logic and positive output logic. PresentationProduct rangeModicon M241Product typeLogic controllerNominal supply voltage [Us] 24 V CCNumber of digital inputs14, digital input 8 fast input conforming to IEC 61131-2 Type 1digital output typeTransistor number of digital outputs10 transistors 4 fast outputdigital output voltage24 V DC for transistor outputdigital output current0.5 A for transistor output (Q0...Q9 )0.1 A for fast output (PTO mode) (Q0...Q3)Technical characteristicsnumber of digital I/Os 24number of I/O modules O expansion7 (local I/O architecture)14 (remote I/O architecture)power supply voltage limits 20.4…28.8 Vinrush current 50 A power absorbed in W 32.6…40.4 W (with max number of I/O expansion modules)Digital input logicSink or sourcedigital input voltage 24 Vvoltage type of digital input DCvoltage state 1 guaranteed>= 15 V for inputvoltage state 0 guaranteeddigital input current5 mA for input10.7 mA for fast inputinput impedance4.7 kOhm for input2.81 kOhm for fast inputResponse time50 µs turn-on, I0...I13 terminals per input50 µs turn-off, I0...I13 terminals per inputConfigurable filtering time1 µs per input rapid12 ms per input rapid0 ms per input1 ms per input4 ms per input 12 ms per inputdigital output logicPositive logic (source)output voltage limits 30 V DCcurrent for common output2 A with Q0...Q3 terminal for fast output2 A with Q4...Q7 terminal for output1 A with Q8...Q9 terminal for outputoutput frequency20 kHz for fast output (PWM mode) 100 kHz for fast output (PLS mode)1 kHz for outputprecision+/-0.1% at 0.02…0.1 kHz for fast output+/- 1 % at 0.1…1 kHz for fast outputmaximum leakage current5 µA for output
€548,55
Schneider-Electric TM3 8 output relay module TM3DQ8R The product is part of the Modicon TM3 range, an offering of expansion I/O modules for Modicon M221, M241, M251 and M262. The digital output module provides 8 relay outputs with sink or source logic (positive/negative). PresentationProduct rangeModicon TM3Product typeDigital output modulerange compatibilityModicon M241 Modicon M251Modicon M221Modicon M262 - Modicon M241 - Modicon M251Digital output typeRelay normally opennumber of digital outputs 8logic digital outputPositive or negativedigital output voltage24 V DC for relay output240 V ACdigital output current2000 mA for relay outputTechnical characteristicsnumber of digital I/Os 8Current consumption5 mA at 5 V DC Via the bus connector (in the off state)0 mA at 24 V DC Via the connector of the bus (in the off state)40 mA at 24 V DC Via the bus connector (in the on state)30 mA at 5 V DC Via the bus connector (in the on state)time response10 ms (turn-on)5 ms (turn-off)Mechanical life20000000 cyclesminimum load10 mA at 5 V DC for relay outputlocal signaling1 LED per channel (green)output status:electrical connection11 2.5 mm² terminal block removable screw with 5.08 mm pitch adjustment for outputs maximum cable length between devicesUnshielded cable: IsolationBetween output and internal logic at 2300 V ACBetween outputs at 750 V ACBetween output groups at 1500 V ACCE markingMounting supportTop hat type TH35-15 rail compliant with IEC 60715Top hat type TH35- 7.5 rail compliant with IEC 60715plate or panel with fixing kitheight90 mmdepth84.6 mmwidth27.4 mm product weight0.11 kg EnvironmentReference standardsIEC 61131-2Product certificationsCEcULus"UKCA"RCMEACcULus HazLocResistance to electrostatic discharge8 kV in air conforming to IEC 61000-4-24 kV on contact conforming to IEC 61000-4- 2resistance to electromagnetic fields10 V/m 80 MHz...1 GHz conforming to IEC 61000-4-33 V/m 1.4 GHz...2 GHz conforming to IEC 61000 -4-31 V/m 2 GHz...3 GHz conforming to IEC 61000-4-3resistance to magnetic fields30 A/m 50/60 Hz conforming to IEC 61000-4 -8fast transient resistance2 kV for relay output conforming to IEC 61000-4-4surge resistance1 kV I/O common mode conforming to IEC 61000-4-5 DC resistance to conducted disturbances, induced by radio frequency fields10 V 0.15...80 MHz conforming to IEC 61000-4-63 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) compliant with Marine specification (LR, ABS, DNV, GL)electromagnetic emissionRadiated emissions 40 dBμV/m QP class A (10 m) at 30… 230 MHz conforming to IEC 55011Radiated emissions 47 dBμV/m QP class A (10 m) at 230…1000 MHz conforming to IEC 55011operating ambient temperature-10…35 °C vertical installation-10…55 °C horizontal installationStorage temperature-25…70 °Crelative humidity10…95 %, non-condensing (in operation)10…95 %, non-condensing (in storage)IP protection degreeIP20 with protective cover mountedPollution degree 2Operating altitude0...2000 mstorage altitude0…3000 mvibration resistance3.5 mm at 5…8.4 Hz on DIN rail3 gn at 8.4…150 Hz on DIN rail3.5 mm at 5…8.4 Hz on panel3 gn at 8.4…150 Hz on panel
€175,35
Schneider-Electric Thermostat for fans NSYCCOTHO Simple ClimaSys CC thermostat. 250V AC. 68 x 33 x 44 mm Bimetallic sensor with NO contact type. 1 ventilation function. Electrical connection via 4 2.5 mm² terminals. PresentationRangeClimaSysProduct nameClimaSys CCProduct typeSimple thermostattemperature adjustment range0…60 °CDisplayed informationTemperature in °CTechnical characteristicsvoltage input 250 Vtype of sensorBimetallicComposition and type of contactsNOcontact resistance10 mOhmService duration [ cycles]100000 cyclesMaximum switching capacity2 A 120...250 V AC inductive pf: 0.610 A 250 V AC resistive 15 A 120 V AC resistive30 W DCElectrical connection4 terminals, clamping capacity: 2.5 mm²Installation CutheightExternal: 68 mmwidthExternal: 33 mmdepthExternal: 44 mmproduct weight40 g
€22,30
Schneider Electric ATV320 speed variator - 5.5kW - 380...500V - three-phase - compact ATV320U55N4C The Altivar Machine ATV320 range offers variable speed drives designed for machinery and equipment manufacturers (OEMs). Compact form factor allows for vertical stacking of units within machine frames; the unit operates with a rated power of up to 5.5 kW / 7.5 hp and a rated voltage of 380V to 500V AC. Its rugged design with PCBs coated to IEC 60721-3-3 class 3C3 allows you to extend the machine's availability in harsh environmental conditions without the need for additional cooling. It integrates functions suitable for the most common applications, Examples: torque and speed precision at very low speed, highly dynamic performance with sensorless flux vector control and wide frequency range for high-speed motors. It also includes parallel connection of motors and special drives using voltage/frequency ratio, static speed accuracy and energy saving for open loop synchronous motors. Weighs 2.2kg; dimensions: 150mm wide, 232mm high, 172mm deep. The Altivar Machine ATV320 meets simple and advanced application requirements for packaging, material handling, textile, materials processing, mechanical actuators and lifting. It complies with IEC, UL, TUV, KC and other international standards. Mounting accessories and external options are also available with Altivar Machine ATV320 drives, such as braking resistors, line chokes, motor chokes, additional EMC filters. The type of accessories and external options depends on the range of the drive. The product is delivered in two packs. It is designed to be mounted on a panel in a vertical position via 4 fixing holes. It is fully integrated into Schneider Electric's EcoStruxure Machine via DTM. ATV320 drives can be configured, controlled and diagnosed directly in SoMachine and SoMove software using the same software brick (DTM). It is environmentally friendly and complies with directives such as RoHS, WEEE, etc. relating to environmental protection. Product Range: Altivar Machine ATV320Product Type: Variable speed driveProduct For Specific Applications:Complex machinesVariant: Standard versionVariator format: CompactInstallation: Wall MountPort Communication Protocol:Serial ModbusCANopenOptional Board: Communication Module, CANopenCommunication Module, EtherCATCommunication Module, Profibus DP V1Communication module, ProfinetCommunication module, Ethernet PowerlinkCommunication module, Ethernet/IPCommunication module, DeviceNetNominal power supply voltage [Us]: 380...500 V - 15 ...10 %Nominal Output Current: 14.3 AMotor Power in kW: 5.5 kW for heavy useIntegrated EMC filterIP Protection Degree: IP20
€859,30
Schneider-Electric Security Module, Harmony XPS XPSUVN11AP Safety module, Harmony XPS, zero speed control with timing, 24V, screw terminals Technical dataProduct Range Harmony Safety AutomationProduct Type Safety moduleName Safety Module star-delta motor supplied by variable speed driveMonitoring 3-phase motor supplied by servo driveControlling enegization to open of guard switch type XCSE, XCSLE, >Can reach PL e/category 3 for NO relay contact conforming to ISO 13849-1Can reach SILCL 3 for NO relay contact conforming to IEC 62061Can reach SIL 3 for NO relay contact conforming to IEC 61508 Reliability Data Safety MTTFd > 30 years compliant with ISO 13849-1Dcavg = 98.9 % compliant with ISO 13849-1PFHd = 2.39E-9 1/ h conforming to ISO 13849-1HFT = 1 conforming to IEC 62061PFHd = 2.39E-9 1/h conforming to IEC 62061SFF > 99% conforming to IEC 62061HFT = 1 conforming to IEC 61508-1PFHd = 2.39E-9 1/h conforming to IEC 61508-1SFF > 99% conforming to IEC 61508-1Type = B conforming to IEC 61508-1Product Certifications TÜVcULusNominal Power Voltage [Us] 24 V AC - 15...10 % 24 V DC - 20...20 %Output Type Relay, 1 NO circuits, potential-freeNumber of Additional Circuits 2 static outputsMaximum Consumption In W 2.0 WMaximum Power Consumption In Va5.5 VAInput Voltage 690 VInput Detection Threshold 50 mV65 mV85 mV110 mV140 mV180 mV230 mV300 mV400 mV500 mVTiming 0.5 s1 s2 s3 s5 s8 s12 s20 s35 s60 s Rated Operating Current [Ie] 5 A AC-1 for NO relay contact3 A AC-15 for NO relay contact5 A DC-1 for NO relay contact3 A DC-13 for NO relay contactConventional Thermal Current In Air [Ith]6 A for NO relay output circuit Associated Fuse Rating 6 A gG for relay output compliant with IEC 60947-1Standards IEC 60947-5-1IEC 61508-1 function standard safety functionIEC 61508-2 standard safety functionIEC 61508-3 standard safety functionIEC 61508-4 standard safety functionIEC 61508-5 standard safety function IEC 61508-6 standard safety functionIEC 61508-7 standard safety functionISO 13849-1 standard safety functionIEC 62061 standard safety functionMinimum Output Current 10 mA for relay outputMinimum Output Voltage 5 V for relay outputNominal Insulation Voltage[Ui] 690 V phase to phase (pollution degree 2) conforming to IEC 60947-1400 V phase to earth (pollution degree 2) conforming to IEC 60947-1Rated Impulse Withstand Voltage [Uimp]4 kV overvoltage category II conforming to IEC 60947-1Local Signaling Green LED with power markings for Power ONRed LED with error markings for errorYellow LED with state markings for statusYellow LED with L12 markings for input line comparisonYellow LED with L32 markings for input line comparisonConnections - Terminals Removable screw terminal block solid or flexible cable: 0.2...2.5 mm²Removable screw terminal block flexible with ring nut cable: 0.25...2.5 mm² conductor singleRemovable screw terminal block solid or flexible cable: 0.2...1.5 mm² double conductorRemovable screw terminal block flexible with ring nut cable: 2 x 0.25...1 mm² withoutcable end, with bezelFlexible removable screw terminal block with cable ring: 2 x 0.5...1.5 mm² withcable end, with bezelInstallation Symmetrical DIN rail 35 mmDepth 120 mmHeight 100 mmWidth 22, 5 mmProduct Weight 0.2 kg
€448,05
Schneider Electric M241 controller 24 I/O transistor PNP, Ethernet, CAN master TM241CEC24T The TM241 controller is part of the Modicon M241 logic controller range. It has 24 logical I/Os and is powered by 24V DC. It comes with removable screw terminal blocks for connecting I/O, a removable terminal block for connecting power, a BR2032 coin cell backup battery. The M241 logic controller has 5 integrated communication ports, two serial connections (RS232/RS485 and RS485) and a mini-B USB programming port. It also has an Ethernet port and a CANopen port. Allows control of simple movements or control loops. The capacity of the M221 logic controllers can be expanded with the Modicon TM3 expansion module offering. Product Range: Modicon M241Product Type: Logic ControllerNominal Power Voltage [Us]: 24 V DCNumber of Digital Inputs: 14, digital input 8 fast input compliant with IEC 61131 -2 Type 1Digital Output Type: TransistorNumber of Digital Outputs: 10 transistors 4 fast outputDigital Output Voltage: 24 V DC per transistor outputDigital Output Current: 0.5 A per transistor output (Q0...Q9)0.1 A for fast output (PTO mode) (Q0...Q3)Number of digital I/Os: 24Number of I/O modules Expansion:7 (local I/O architecture)14 (remote I/O architecture)Power Supply Voltage Limits: 20.4…28.8 VInrush Current: 50 APower consumption in W: 32.6…40.4 W (with max number of I/O expansion modules)
€655,70
Schneider-Electric Ethernet TCP/IP module ATV32/LXM32 VW3A3616 The Schneider Electric Altivar Ethernet TCP/IP communication module has 2 ports with RJ45 connectors. This communication module allows the integration of the drive into the Ethernet TCP/IP process control network. PresentationProduct rangeAltivarProduct typeCommunication moduleaccessories / element category Communication accessoriesTechnical characteristicsProduct compatibilityLexium 32Mrange compatibilityAltivar Machine ATV320Altivar 32Lexium 32Port communication protocolModbus TCPEthernet/IPElectrical connection1 RJ45 connector, Ethernet/IP1 RJ45 connector, Modbus TCP baud rate10/100 MbpsAddressingIP addressing manual, BOOTP or DHCPexchange modeHalf duplex and full duplex Communication serviceUp to 8 connections (includes connections of Modbus TCP/Ethernet IP) for Ethernet IP/Modbus TCPFDR Agent for Ethernet IP/Modbus TCPRead holding registers ( 03), 63 words max for Modbus TCPRead input registers (04), 63 words max for Modbus TCPWrite single register (06) for Modbus TCPWrite multiple registers (16), 63 words max for Modbus TCPRead/write multiple registers (23) for Modbus TCPRead device identification (43) for Modbus TCPDiagnostics (08) for Modbus TCPI/O scanner : read/ write, 6 words maximum for Modbus TCPCommunication control for Modbus TCPSNMP agent for Ethernet IPMaster/Slave hierarchy ODVA AC drive profile and CiA 402 profile for Ethernet IPFixed communication monitoring adjusted by Ethernet IP scanner adapter (Master) for Ethernet IP
€189,95
Schneider Electric STB standard network interface module - Ethernet - 10 Mbit/s STBNIP2212 The product is part of the Modicon STB modular distributed I/O range. The standard network interface module has 1 main segment and up to 6 extension segments. It is an interface module with a nominal supply voltage of 24V DC, a maximum supply current of 700 A, an output voltage of 5.25V DC and an output current of 1.2 A. It offers the following communication services : embedded web, BootP/DHCP protocol, etc. The product is compatible with most major fieldbus networks. Works with SELV power supply. The product is classified IP20. Dimensions: 128.3mm (width) x 70mm (depth) x 40.5mm (height); weight: 0.13 kg. It is suitable for packaging, bottling, assembly and distribution applications, in the textile and printing industries and in semiconductor machines. The product is CE, CSA, ATEX category 3G, FM Class 1 Division 2, C-Tick and UL certified. Modicon LMC058 is the optimal solution for axis control and positioning, including automation functions. It is part of the flexible machine control approach, a key component of MachineStruxure. Product Range Modicon STB distributed I/O solutionProduct Type Standard Network Interface ModuleConcept Transparent ReadyDoor Ethernet 10BASE-TNumber of Segments 1 main and max 6 extensionsNumber of Devices ForSegment0…256Transmission Speed 10 Mbit/s for bus length of 3000 m with fiber optic connection10 Mbit/s for bus length of 0…100 m according to standard 802.310 Mbit/s for bus length of 0…1000 m with ConneXium cabling systemType of Structure Industrial LANNumber of Addressable I/O Modules 0…32 per isolateCommunication Service SNMP agentModbus TCP/IP messagingEmbedded web (configuration, diagnostics and variable access)BootP/DHCP protocolNominal Voltage DiPower supply [Us]24 V DCType of power supply SELVMaximum Current Supplied 700 APower Supply Voltage Limits 19.2…30 VInput Current 430 mA for power supply circuitNominal Output Current 0.575 A at 60…70 °C1.2 AOutput Voltage 5.25 V DC (tolerance: +/-0.21%) for logic bus
€438,35
Schneider-Electric TouchScreen 320×240 pixel QVGA - 5.7" TFT - 96 MB HMIGTO2310 The Schneider Electric GTO IP65 touchscreen human machine interface (HMI) is powered by 24 VDC, features a 5.7, 320 x 240 pixel (QVGA) color TFT LCD display and 96 MB EPROM. It also has 1 host + 1 USB mini-B port, 1 RS232C port and 1 Ethernet TCP/IP port. This human-machine interface (HMI) is ideal for optimizing information and communication with industrial automation systems and infrastructures, such as compact machines, handling systems, machines for the food and pharmaceutical industries. The screen displays text messages, graphic objects and summary diagrams, data control and setting. Technical dataProduct Range Harmony GTOProduct Type Advanced touchscreen panelDisplay colour 65536 colorsDisplay Size 5.7 inchesPower External powerOperating System HarmonyBattery Type Lithium battery for internal RAM, autonomy: 100 days, charging time = 5 days,battery life = 10 yearsTerminal Type TouchscreenDisplay type TFT LCD full color backlitDisplay Resolution 320 x 240 pixels QVGATouch Sensitive Area 1024 x 1024Screen Digital Resistive film, 1000000 cyclesRear light life 50000 hours white at 25 °CBrightness 16 levels - control by touch panel16 levels - control by softwareFont Character KoreanTaiwanese (traditional Chinese)ASCII (European characters)Chinese (simplified Chinese)Japanese (ANK , Kanji)Nominal Voltage Di Power Supply [Us]24 V DCPower Supply Voltage Limits 19.2…28.8 VInrush Current 30 AAbsorbed Power In W 6.5 W when power is not supplied to external devices4.5 W when backlight is OFF5 W when backlight is dimmed10,5 WLocal Signalling Green status LED, fixed for offlineGreen status LED, fixed for operationalOrange status LED, flashing for software starting upRed status LED, steady for Power (ON)Transparent status LED, faded for Power (OFF)COM2 Yellow LED, solid for data is being transmittedCOM2 Yellow LED, faded for no data transmissionSD card Green LED, solid per card is insertedSD card Green LED, faded per card is not inserted or is not being accessedSoftware Description Video Designer configuration software >= V6.1Memory Description Flash EPROM, 96 MBData Backup 512 kB internal RAM (SRAM)Data Storage Unit SD Card,SDHC Card,Protocols Downloadable Schneider Electric Modicon ModbusSchneider Electric Modicon Uni-TESchneider Electric Modicon Modbus PlusSchneider Electric Modicon FIPWAYMitsubishi Melsec third party protocolsOmron Sysmac third-party protocolsRockwell Automation Allen-Bradley third-party protocolsSiemens Simatic third-party protocolsSchneider Electric Modicon Modbus TCPConnection Type Integrated Connection serial COM1 SUB-D 9, interface: RS232C,transmission range: 2400...115200 bpsSerial connection COM2 RJ45, interface: RS485, transmission rate:2400...115200 bpsSerial connection COM2 RJ45, interface: RS485, transmission rate:187.5 kbps compatible with Siemens MPIEthernet RJ45, interface: 10BASE-T/100BASE-TXEthernet RJ45, interface: IEEE 802.3USB 2.0 type AUSB 2.0 type mini BProduct Mounting Floor mountingType Fixing With 4 screw terminalsMaterial Front Part PPTMaterial PPT cassetteType of cooling Natural convectionWidth 169.5 mmHeight 137 mmDepth 59.5 mmProduct Weight 0.8 kg
€971,35
Schneider-Electric Vigipact 200/440VAC 4P NSX250 LV429493 This is a Vigi differential module for the ComPact NSX 250 which provides earth leakage protection. It is used for 4 pole circuit breakers. PresentationProduct range"ComPacT NSX100...250 new generation""ComPact NSX100...250"Device nameVigiPacTProduct typeVigi add-onApplicationWiringRange compatibility"ComPacT new generation" "ComPacT NSX250 new generation" switch automaticCompact "ComPact NSX250" circuit breakerNumber of poles 4PRated current [In] 250 AType of differential protectionClass AClass ACType of residual differential sensitivity adjustmentAdjustabledifferential sensitivity0.03 A for class A0.1 A for class A0.3 A for class A0.5 A for class A1 A for class A3 A for class A10 A for class AC30 A for class ACResidual earth fault delay adjustment typeAdjustableResidual differential timing adjustment [Δt]0 ms60 ms150 ms300 ms500 ms800 ms1.2 s4 sTechnical characteristicsNetwork typeCAMains frequency50/ 60 Hz[Ue] rated operational voltage200...440 V AC 50/60 Hz conforming to IEC 60947-2differential protectionWith maximum interruption time800 ms overvoltage category IVEnvironmentProtection class against electrical dischargesClass II
€990,70
Schneider Electric TM3 module - 4 temperature inputs TM3TI4 The product is part of the Modicon TM3 range, an offering of expansion I/O modules for Modicon M221, M241, M251 and M262. The analog input module provides 4 x 16-bit inputs and 15-bit + sign resolution. PresentationProduct rangeModicon TM3Product typeAnalog input modulerange compatibilityModicon M221 Modicon M241Modicon M251Modicon M262 - Modicon M241 - Modicon M251number of analogue inputs 4Type of analogue inputCurrent 4...20 mAcurrent 0...20 mAvoltage 0...10 Vvoltage - 10...10 Vthermocouple -200...1000°C with thermocouple J thermocouple - 200...1300°C with thermocouple Kthermocouple 0...1760°C with thermocouple Rthermocouple 0...1760°C with thermocouple Sthermocouple 0...1820° C with thermocouple Bthermocouple - 200...400°C with thermocouple Tthermocouple - 200...1300°C with thermocouple Nthermocouple -200...800°C with thermocouple Ethermocouple 0...2315°C with thermocouple CNi 100/Ni 1000 temperature probe - 60...180 °CPt 100 temperature probe - 200...850 °CPt 1000 temperature probe - 200...600 °CTechnical characteristicsanalog input resolution 16 bit15 bit + signContinuous overload permitted13 V, analog input type: voltage40 mA, analog input type: currentInput impedance>= 1 MOhm voltage>= 1 MOhm thermocouple>= 1 MOhm temperature probeLSB value2.44 mV 0...10 V voltage4.88 mV - 10. ..10 V voltage4.88 µA 0...20 mA current3.91 µA 4...20 mA current0.1 °C temperature probe0.1 °C thermocoupleConversion time100 ms + 100 ms per channel + 1 controller cycle time thermocouple100 ms + 100 ms per channel + 1 controller cycle time temperature probe10 ms + 10 ms per channel + 1 controller cycle time voltage/currentsampling duration10 ms, analog input type: voltage/current100 ms, analog input type: voltage/current100 ms, analog input type: thermocouple100 ms, analog input type: temperature probe
€254,75
