Italweber 2301058The body of the fuse holder has a modern design and is made of self-extinguishing thermoplastic materials resistant to high temperatures (all materials are UL listed) while the relative contacts are in silver-plated copper. All sectionable fuse holders can be sealed for the safety of operators during maintenance. Fuses must be ordered separately. BCH 58 - Sectionable fuse holders (AC-20B) for 22X58 cylindrical fuses

Read more less

Italweber 2301038The body of the fuse holder has a modern design and is made of self-extinguishing thermoplastic materials resistant to high temperatures (all materials are UL listed) while the relative contacts are in silver-plated copper. All sectionable fuse holders can be sealed for the safety of operators during maintenance. Fuses must be ordered separately. BCH 38 - Sectionable fuse holders (AC-22B) for cylindrical fuses 10.3X38

Read more less

Siemens 3NW7131SENTRON, fuse holder for cylindrical cartridges, 14x51 mm, 3-pole, In: 50 A, Un AC: 690 V &DPMD_ACC602_001_000_1004330&

Read more less

Eaton JM602001CR Fuse block, Low voltage, 200 A, AC 600 V, J, 1P, UL, Modular, knife blade, fuse cartridges LPJ-SP, PJ-SPI, JKS, DFJ, breaking capacity 200 kA, Thermoplastic body, Optional accessories IP20 protective cover against finger contact. Technical dataNumber of poles1Rated current200 TOMounting on barsNoSectionableNoProduct Length/Depth6.6 inProduct Height3.74 inProduct Width2.69 inProduct Weight0.81 lb

Read more less

Italweber 0900144 Panel fuse holder - For 5 x 20 mm fuses - Current = 6.3A - Voltage = 250V

Read more less

Italweber 0900163Made of thermoplastic material, with or without connection cables. They are supplied without fuse. Union: interlocked bayonet. Body: black backelite. Contacts: brass with screw terminal. Fuse dimensions: 5x20 mm. Color: Black

Read more less

Italweber 0900141In self-extinguishing thermoplastic material, for panel mounting. They are supplied without fuse. Panel fuse holder for 5X20 fuses. Mounting: built-in. Body: in UL 94 V0 thermoplastic material. Contacts: nickel-plated brass. Execution cap: bayonet. Execution connection: Faston connections. Fuse dimensions: 5x20 mm.

Read more less

Finder 093630024 Fuse holder module: For fuse (5 x 20 mm) up to 6 A, 250 V, easy viewing of the fuse status through the appropriate window. Quick connection on the socket

Read more less

Italweber 0900311Made of self-extinguishing thermoplastic material, for mounting on a bottom plate or DIN rail. They are supplied without fuse. Body: in self-extinguishing thermoplastic material. Execution cap: screw. Terminals: screw. Fixing: on DIN 46277/3 EN 50022 profile. Contacts: nickel-plated brass. Version: single-pole with protective cap. Fuse dimensions: 5x20 mm

Read more less

Italweber 0900176Flying fuse holder - For 5 x 20 mm and 6.3 x 32 mm fuses - Current = 6.3A - Voltage = 250V - With 1.5 mmq cables

Read more less

Italweber Fus NH3 KTF gG 500A 500V, 1530500 Body in steatite with high thermal and mechanical resistance. The fusible elements of copper or silver-plated copper are soldered to the contact blades, inserted into the fusible body closed with gaskets and attachment plates, everything is filled with quartz sand. The NH Kombi fuses are equipped with a double trip signaling device located in the central part and in the upper part. Breaking capacity: 100/120kA. NH kombi and NH/I 500V fuses - TYPE gG. Size: NH-3.

Read more less

Italweber Fus NH00 KTF gG 160A 690V 1600660  NH-00 knife fuse - Type: standard - Curve: gG - Current = 160A - Voltage = 690V.

Read more less

Italweber 2690304SUniversal extraction handle for NH fuses size 00-3, type NHP00/3

Read more less

Eaton TD3-D Fuse accessories, fuse socket, Low voltage, 630 A, AC 690 V, NH3, 3P, IEC, DIN rail mounting, IEC 60269-1, with thermoplastic body. Optional accessories: clip phase separators, terminal covers, fuse covers, microswitch, IP20 protection kit against contact with fingers, neutral connection jumpers, phase separators

Read more less

Italweber 2541110Base in self-extinguishing thermoplastic material on which the contact pliers are mounted. Special accessories ensure protection against accidental contact (see page 104). They are designed for fixing both on a base plate and on a DIN rail. The NHU-MS fuse holder is equipped with a microswitch and can be used in combination with fuses equipped with a striker. NH single-pole fuse holders - Size 1

Read more less

Italweber 2504010Single-pole fuse holders for NH knife fuses - screw or DIN rail fixing. The new fuse holder bases for NH fuses of the NHV and NHG series are made of UL-94 V0 self-extinguishing thermoplastic material without red phosphors, and the contacts are in silver-plated copper. Washers and bolts are 8.8 steel. A wide range of accessories allows you to create effective protection against accidental contact (see page 105). The NHV series fuse bases are screw mounted on a bottom plate, while the NHG series bases can be screw mounted on a bottom plate or on a DIN rail. The NHG-MS fuse holder bases are equipped with a microswitch and can be used with the appropriate fuses equipped with a striker from the NH/CP-S series. Size: 00. Type: NHV-00. In: 160.

Read more less

Italweber 2640010Single-pole fuse holders center distance 80 mm. The fuse holder bases suitable for hosting fuses for bolt fixing are all of the unipolar type, and are made up of a base in self-extinguishing thermoplastic material on which the connections for fixing the bolt fuses are mounted. In particular, the 80/110 mm center distance series can accommodate both fuses with a fixing distance of 80 mm and fuses with a fixing distance of 110 mm. This occurs by appropriately moving the base fixing attachments to the two positions provided: 80 mm and 110 mm. A series of microswitches is available for remote signaling of the intervention of the fuses. Type: 790026. In: 400A. Terminal covers available on request, code IW 2640030 (order 2 pieces for each fuse holder).

Read more less

Italweber 2503210Base in self-extinguishing thermoplastic material on which the contact pliers are mounted. Special accessories ensure protection against accidental contact (see page 104). They are designed for fixing both on a bottom plate and on a DIN rail. NHU-00 “KOMBI” fuse holder - 3 poles in a single body - screw or DIN rail fixing

Read more less

Italweber 2541005Base in self-extinguishing thermoplastic material on which the contact pliers are mounted. Special accessories ensure protection against accidental contact (see page 104). They are designed for fixing both on a base plate and on a DIN rail. The NHU-MS fuse holder is equipped with a microswitch and can be used in combination with fuses equipped with a striker. NH single-pole fuse holders - Size 00

Read more less

Italweber 2502010 Base in self-extinguishing thermoplastic material on which the contact clamps are mounted. Special accessories ensure protection against accidental contacts (see page 104). They are designed for fixing both on a base plate and on a DIN rail. The NHU-MS fuse holder is equipped with a microswitch and can be used in combination with fuses equipped with a striker. Single-pole NH fuse holders - Size 00

Read more less

Italweber 33200LTS series sectionable three-pole fuse holder without fuse monitoring, made of self-extinguishing and flame-resistant thermoplastic material. It is mounted on a bottom plate and, using a kit, can be mounted on a DIN rail (sizes 00-1-2 only). Sectioning occurs by opening or closing the lid. The fuses remain inside the open cover.

Read more less

Italweber 1602035NH-00C knife fuse - Type: standard - Curve: aM - Current = 35A - Voltage = 690V

Read more less

Italweber 1505050 Body in steatite with high thermal and mechanical resistance. The copper or silver-plated copper fuse elements are soldered to the contact blades, inserted into the closed fuse body with gaskets and hooking plates, the whole is filled with quartz sand. NH Kombi fuses are equipped with a double tripping signalling device located in the central and upper part. Breaking capacity: 100/120kA. NH kombi and NH/I 500V fuses - Type gG. Size : NH-0

Read more less

Italweber 1635040 Blade type fuse NH-1 - Type: standard - Curve: gG - Current = 40A - Voltage = 800V

Read more less