Schneider Electric BMXCPS2010 The product is part of the Modicon X80 range, a common module platform for the Modicon M580 and M340 programmable automation controllers (PAC). The power module has an isolated voltage of 24V DC. It is a power module with a secondary power of 16.8W at 24V DC, a secondary voltage current of 2.5A at 3.3V DC and a maximum power dissipation of 8.5W. The product is robust, high quality and based on the latest and most innovative technology. Technical data primary voltage limit 18...31.2 V input current 1 A 24V starting current 30A 24V I²t on activation 0.6 A²s 24V It to activation 0.15 A at 24 V MTBF Reliability 4886000 H type of protection Internal fuse not accessible for primary circuit Overload protection for secondary circuit, sensor power supply 24 V Overvoltage protection for secondary circuit, 24V sensor power supply Short circuit protection for secondary circuit, sensor power supply 24V secondary voltage current 0.7A 24V DC power supply I/O module and processor 2.5A 3.3V DC I/O Module Logic Power Supply Maximum power dissipation in W 8.5W Status LED 1 LED (green) rack voltage ok Control type RESET button cold restart electrical connection 1 connector 2 pin(s) alarm relay 1 connector 5 pin(s) power line, protective earth, sensor input 24 V DC Maximum cable distance between devices 20m power cable copper 1.5mm² 30m power cable copper 2.5mm² Insulation resistance >= 10 MOhm primary/ground >= 10 MOhm primary/secondary Net weight 0.29 kg

Read more less

Schneider Electric ABL8RPS24100The Schneider Electric ABL8 regulated switching mode power supply provides DC voltage, has a nominal input of 100 to 500 VAC, a nominal output current of 10 A at 24 VDC and a rated power output of 240 watts. This regulated switching power supply (SMPS) is ideal for supplying the DC voltage required for automation equipment designed for industrial, commercial and residential applications such as transportation, packaging, inspection, food and beverage, mining, oil and gas and water. It also offers a high level of output voltage stability and remote diagnostics. It can be easily installed on a DIN rail and is 85mm wide. It is also equipped with a PFC (Power Factor Correction) filter.

Read more less

Schneider Electric Switching power supplies, 100-240 V AC ABLS1A24050 The ABLS regulated switching power supply (SMPS) provides direct current voltage. It has a rated input of 100V to 240V AC and 140V to 340V DC, a rated output current of 5A at 24V DC, and a rated power output of 120W. It is ideal for providing the DC voltage needed for your equipment automation systems designed for industrial, commercial and residential applications.  Technical specifications:Type of supply voltageDCOutput voltage 124...24 VMax. output current 15 AOutput voltage adjustableyesOutput voltage rating 124 VOutput current rating 15 A Short-circuit proofyesRated AC supply voltage 50 Hz100...240 VRated AC supply voltage 60 Hz100...240 VNominal DC supply voltage140...340 VStabilised output voltageyesPower consumption21.2 VAOutput power120 W StabilisedyesType of electrical connectionScrew connectionRail mounting possibleyesWall mountablenoSuitable for modular mounting noRecessing width40 mmRecessing height123.6 mmDirect mounting possiblenoWidth40 mmHeight123.6 mmDepth117.6 mmSuitable for safety functionsnoSIL according to IEC 61508NonePerformance level compliant with EN ISO 13849-1NoneDegree of protection (IP)IP20

Read more less

Schneider Electric Switching power supplies 100-240 V AC ABLM1A12042  The ABLM regulated switching power supply (SMPS) provides direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 4.17A at 12V DC, and a rated power output of 50W. It is ideal for providing the DC voltage needed for automation equipment designed for industrial applications , commercial and residential. Technical characteristics:Type of supply voltageDCOutput voltage 112...12 VMax. output current 14.2 AOutput voltage adjustableyesOutput voltage rating 112 VOutput current rating 14.2 A Short-circuit proofyesRated AC supply voltage 50 Hz100...240 VRated AC supply voltage 60 Hz100...240 VStabilised output voltageyesOutput power50 WStabilisedyesType of electrical connectionScrew connectionMounting possibilities on railyesWall mountableyesSuitable for modular mountingyesWidth in number of modules1Recessing width53 mm Recessing height91 mmDirect mounting possibleyesWidth53 mmHeight91 mmDepth55.6 mmSuitable for safety functionsnoSIL according to IEC 61508NonePerformance level compliant with EN ISO 13849-1NoneDegree of protection (IP) IP20

Read more less

Schneider-Electric universal power supply ABL8RPS24050 The Schneider Electric ABL8 regulated switching mode power supply provides direct current voltage, has a rated input of 100 to 500 Vac, a rated output current of 5 A at 24 Vdc and a rated power of 120 watts. PresentationProduct rangeModicon Power SupplyProduct typePower supplypower supply type Switching modeNominal input voltage100...120 V AC single phase, terminals: N-L1200...500 V AC phase to phase, terminals: L1-L2rated power in W 120 Woutput voltage 24 V DCoutput power supply current 5 Aadmissible temporary current amplification 1.5 x In (for 4 s)anti-harmonic filterLow frequency harmonic currentsTechnical characteristicsinput voltage limits85...132 V AC170...550 V ACinput current inrush 30 A18 mm modules0.51 at 240 V AC0.59 at 120 V ACefficiency 87 %Output voltage adjustment24...28, 8 V adjustablepower dissipated in W 15.5 WEquipment suppliedCorrector filter power factor compliant with IEC 61000-3-2output protection type Against overload, protection technology: manual or automatic resetAgainst overvoltage, protection technology: 30...32 V, manual resetAgainst short circuits, protection technology: manual or automatic resetAgainst undervoltage, protection technology: intervention with U Thermal, protection technology: automatic resetConnections - terminalsRemovable screw terminal block: 2 x 2.5 mm², for diagnostic relayScrew terminal blocks: 3 x 0.5...3 x 4 mm², (AWG 22...AWG 12) for input connectionScrew terminal blocks: 1 x 0.5... 1 x 4 mm², (AWG 22...AWG 12) for input earth connectionScrew terminal blocks: 4 x 0.5...4 x 4 mm², (AWG 22...AWG 12) for output connectionScrew terminal blocks: 1 x 0.5...1 x 4 mm², (AWG 22...AWG 12) for output grounding connectionStatus LED1 LED (green and red) output voltage1 LED (green, red and orange) output currentdepth125 mmheight143 mmwidth56 mm product weight0.7 kgoutput connectionParallelSeries

Read more less

Schneider Electric Switching power supplies, 100-240 V AC, 24 V 1.2 A, single phase, Modular ABLM1A24012 The ABLM regulated switching power supply (SMPS) provides direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 1.25A at 24V DC, and a rated power output of 30W. It is ideal for providing the DC voltage needed for automation equipment designed for industrial applications , commercial and residential. Examples: transportation, packaging, inspection, food and beverage, mining, oil and gas, and water. It is installed on an omega rail or fixed with a screw. Dimensions: Width 36mm, Height 91mm, Depth 55.6mm. Provides protection against overloads and short circuits with automatic restart after correction of the overload/short circuit source. Weight: 0.170kg. It is a rail mount industrial power supply. It complies with EN62368-1, ENIEC61010-1/2-201, ENIEC61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL62368-1, UL61010-2-201/ -1-201, CSAC22.2No62368-1/No61010-2-201/No61010-1. The product is CE, CUL, RCM and CB Scheme certified. The Acti9 iC60 range of miniature circuit breakers is recommended for its protection. The type of protection is 4A, curve B or C. On the front there is an LED indicating the presence of DC output voltage and a QR code for access to the latest technical documentation. Thanks to their modular housing, they can be installed in industrial enclosures or panels by clip fixing on an omega (DIN) rail. Provides energy to automated systems. Designed for simple machines and applications, modular power supplies are appreciated above all for their extreme compactness. Product Range Modicon Power SupplyProduct Type Power SupplyPower Supply Type Switching ModeVariant Option ModularMaterial Cassette PlasticNominal Input Voltage 100...240 V AC single phase100...240 V AC phase to phase Rated Power In W 30 WOutput Voltage 24 V DCOutput Power Supply Current 1.25 AVoltage Limits In Input 90...264 V ACNominal Network Frequency 50…60 HzMaximum Leakage Current 0.25 mA 240 V ACType of Protection Input Integrated fuse (not replaceable) 3.15 AExternal protection (recommended) 20 A Curve BExternal protection (recommended) 20 A Curve CExternal protection (recommended) ) 4 A Curve BExternal protection (recommended) 4 A Curve CInrush Current 25 A at 115 V50 A at 230 VModules 18 mm 0.48 at 115 V AC0.38 at 230 V ACEfficiency 87 % at 115 V AC87 % at 230 V ACOutput Voltage Adjustment 24...28 V

Read more less

Schneider-Electric Universal power supply ABL8RPS24030 The Schneider Electric ABL8 regulated switching mode power supply provides direct current voltage, has a rated input of 100 to 500 Vac, a rated output current of 3 A at 24 Vdc and a rated power of 72 watts. PresentationProduct rangeModicon Power SupplyProduct typePower supplypower supply typeSwitching modeNominal input voltage100...120 V AC single phase, terminals: N-L1200...500 V AC phase to phase, terminals: L1-L2nominal power in W 72 Woutput voltage 24 V DCoutput power supply current 3 Aadmissible temporary current amplification1.5 x In (for 4 s)anti-harmonic filterCurrents low frequency harmonicsTechnical characteristicsinput voltage limits170...550 V AC85...132 V ACInrush current30 A18 mm modules0.51 at 240 V AC0.59 at 120 V ACefficiency87 %Output voltage adjustment24.. .28.8 V adjustablepower dissipation in W 7.8 WEquipment suppliedPower factor corrector filter compliant with IEC 61000-3-2output protection type Against overload, protection technology: manual or automatic resetAgainst overvoltage, protection technology: 30...32 V, manual resetAgainst short circuits, protection technology: manual or automatic reset Against undervoltage, protection technology: intervention with U Thermal, protection technology: automatic resetconnections - terminalsScrew terminal blocks: 3 x 0.5...3 x 4 mm², (AWG 22...AWG 12) for input connectionScrew terminal blocks: 1 x 0.5...1 x 4 mm², (AWG 22...AWG 12) for input earth connection Screw terminal blocks: 4 x 0.5...4 x 4 mm², (AWG 22...AWG 12) for output connectionScrew terminal blocks: 1 x 0.5...1 x 4 mm², (AWG 22...AWG 12) for output ground connectionStatus LED1 LED (green and red) output voltage1 LED (green, red and orange) current outputdepth125 mmheight125 mmwidth45 mmproduct weight0.3 kgoutput connectionParallel

Read more less

Schneider-Electric 24V 2.5A modular power supply ABLM1A24025 The ABLM regulated switching power supply (SMPS) provides direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 2.5A at 24V DC and a rated power output of 60W. It is ideal for providing the DC voltage needed for automation equipment designed for industrial applications , commercial and residential. PresentationProduct rangeModicon Power SupplyProduct typePower supplypower supply typeSwitching modeVariant optionModularNominal input voltage100...240 V AC single phase100...240 V AC phase to phasenominal power in W 60 Woutput voltage 24 V DCoutput power supply current 2.5 ATechnical characteristicsinput voltage limits90...264 V ACInput protection typeIntegrated fuse (non-replaceable) 3.15 AExternal protection (recommended) 20 A Curve BExternal protection (recommended) 20 A Curve CExternal protection (recommended) 10 A Curve BExternal protection (recommended) 6 A Curve CInrush current30 A at 115 V60 A at 230 V18 mm modules0.50 at 115 V AC0.39 at 230 V ACefficiency90 % at 115 V AC90 % at 230 V ACpower dissipated in W  6.5 Wcurrent absorptionTurn-on time Holding time> 20 ms 115 V AC> 60 ms 230 V ACStartup with capacitive loads3000 µFresidual ripplemean time between failures (MTBF)1300000 H at 25 °C, full load700000 H at 55 °C, 80 % loadoutput protection type Against overload and short circuits, protection technology: automatic resetAgainst over temperature, protection technology: manual resetAgainst overvoltage, protection technology: manual resetconnections - terminalsConnection to screw: 0.5...2.5 mm², (AWG 20...AWG 14) without wire end ferrule for outputScrew connection: 0.5...1.5 mm², (AWG 20. ..AWG 16) with wire end ferrule for outputScrew connection: 0.5...1.5 mm², (AWG 20...AWG 16) for inputline and load regulation Status LED1 LED (green) output voltagedepth55.6 mmheight 91 mmwidth53 mmproduct weight0.221 kgoutput connectionSerialParallelmounting supportTop hat type TH35 -15 rail conforming to IEC 60715Top hat type TH35-7.5 rail conforming to IEC 60715Double profile DIN railpanel mountingpower supplySELV conforming to IEC 60950-1 SELV compliant with IEC 60204-1SELV compliant with IEC 60364-4-41dielectric strength3000 V AC input / output

Read more less

Schneider Electric Power supply with comm. regulated - 1 or 2 phases - 100..240 V AC - 24 V - 20 A ABL8RPM24200   PresentationProduct rangeModicon Power SupplyProduct typePower supplypower supply typeSwitching modeNominal input voltage100...120 V AC single phase, terminals: N-L1200...240 V AC phase to phase, terminals: L1-L2nominal power in W480 Woutput voltage24 V DCoutput power supply current20 Aadmissible temporary current amplification1.5 x In (for 4 s )anti-harmonic filterLow frequency harmonic currentsTechnical characteristicsinput voltage limits85...132 V AC170.. .264 V ACinrush current30 A18 mm modules0.68 at 240 V AC0.69 at 120 V ACefficiency88 % Output voltage adjustment24...28.8 V adjustablepower dissipated in W57.6 Wequipment suppliedPower factor corrector filter compliant with IEC 61000-3-2output protection typeAgainst overload, protection technology: manual or automatic resetAgainst overvoltage, protection technology: 30...32 V, manual resetAgainst short circuits, protection technology: manual or automatic resetAgainst undervoltage, protection technology: tripping with U Thermal, protection technology: automatic reset connections - terminalsRemovable screw terminal block: 2 x 2.5 mm², for diagnostic relayScrew terminal blocks: 3 x 0.5...3 x 4 mm², (AWG 22 ...AWG 12) for input connectionScrew terminal blocks: 1 x 0.5...1 x 4 mm², (AWG 22...AWG 12) for input earth connectionTerminal blocks screw: 4 x 0.5...4 x 4 mm², (AWG 22...AWG 12) for output connectionStatus LED1 LED (green and red) output voltage1 LED (green, red and orange) output currentdepth145 mmheight125 mmwidth146 mmproduct weight1.6 kg output connectionSeriesParallelmarkingCEmounting support35 x 7.5 mm symmetrical DIN rail35 x 15 mm symmetrical DIN railoperating positionVerticalpower supplySELV conforming to IEC 60950-1SELV conforming to IEC 60204-1SELV conforming to IEC 60364-4-41 dielectric resistance2500 V with between input and ground insulation3000 V with between input and output insulation500 V with between output and ground insulation

Read more less

SCHNEIDER ELECTRIC Regulated switching power supply - Three phase - 400 V AC - 24 V - 20 A ABL8WPS24200 Universal stabilized switching power supply, intended for powering, in 24 V DC, the auxiliary circuits of automation systems. Compact, and with switching technology, it guarantees a high degree of stability of the output voltage and represents the ideal complement for the Modicon M340, Premium and Quantum ranges. Additional functional modules can be associated in order to guarantee continuity of service and at the same time be able to discriminate the protection of the powered systems. It guarantees an output voltage equal to the nominal value of 24 V DC ±3%, regardless of the load (from empty to full load) and for any mains supply. Compliant with IEC standards and UL, CSA and TUV approved, it is suitable for universal use. It has protections that ensure optimal operation of the control and automation system. The protection operating mode can be configured according to your specific application needs: • Manual reset protection mode: following a defect that involves a current absorption higher than the nominal value, priority will be given to the output voltage: the power supply will stop completely before the voltage supplied can drop below 21 V DC. In this way, unwanted variations in the logical states of the PLC and powered actuators will be avoided. • Automatic reset protection mode: priority is given to the current to allow, for example, fault finding, or to guarantee continuity of service until the arrival of maintenance workers. When the defect appears, the nominal current continues to be supplied but at a voltage significantly lower than the nominal one of 24 V DC. When the fault disappears the voltage returns to its nominal value. Phaseo Universal power supplies also have a power reserve that allows them to supply a current of 1.5 In at regular intervals; in this way it is possible to avoid oversizing the power supply if devices characterized by high inrush currents must be powered. The diagnostic function of Phaseo Universal power supplies is shown on the front of the product via signaling LEDs (Uout and Iout) and via a potential-free relay contact which allows remote control. All Phaseo Universal power supplies are equipped with a potentiometer for regulating the output voltage to compensate for voltage drops along long cables. Click for a 360 degree view of SCHNEIDER ELECTRIC ABL8WPS24200

Read more less