Schneider Electric A9MEM1591 Energy sensor, PowerTag Rope (DIN rail mounting) 600A 3P/3P+N top and bottom position. Technical DataProduct RangePowerLogicProduct NamePowerTag R600Product TypeMonitoring sensorPoles3F3P + NMaximum current [Imax]600 A[Ib] Basic current100 AStarting current400 mASaturation current1200 AProduct For Specific ApplicationsEnergy managementOverload alarmPower factorLoad monitoringCircuit monitoring

Read more less

Schneider Electric PM5110 power meter 96x96 METSEPM5110 The device is a flush mount energy meter with a 96mm x 96mm backlit LCD display. The meter ensures 0.5S accuracy class according to IEC 62053-22 and 64 samples per cycle. The device measures energy, active and reactive power, voltage, current, frequency, power factor and up to the 15th harmonic. The meter operates on a 50 or 60 Hz mains and accepts supply voltages of 100 to 415 V AC and 125 to 250 V DC. The rated line current for this meter is 1A or 5A input and supports single-phase and neutral, three-phase, or three-phase and neutral configurations. The measurement voltage range between phases is 35 to 690 V AC, 47 to 63 Hz. The measurement range between phase and neutral is 20 to 400VAC, 47 to 63 Hz. The communication protocol consists of by Modbus RTU and ASCII 2 cables with RS485 port. The meter also features a digital pulse output and 33 configurable alarms. Product Dimensions: Width 3.78 inches (96 mm), Depth 2.83 inches (72 mm), Height 3.78 inches (96 mm); weight 13.4 oz (380 g). Technical dataRangePowerLogicProduct namePowerLogic PM5000Device name PM5110Product typeMeasuring instrumentTechnical characteristicspower quality analysisUp to the 15th harmonicApplicationEnergy monitoringtype of measurementCurrentVoltageFrequencyPower factorEnergyActive and reactive powersupply voltage90...450 V AC 45...65 Hz100 ...300 V DCMains frequency50 Hz60 HzRated current [In]1 A 5 Atype of network1P + N3P + N3Ppower absorbed in VA11 VA at 415 Vlocal signaling80 ms 120 V AC typical100 ms 230 V AC typical100 ms 415 V AC typical50 ms 125 V DC typicaldisplay typeMonochrome graphic LCDdisplay resolution128 x 128sampling rate64 samples/ cyclecurrent measurement50…8500 mAanalog input typeVoltage (impedance 5 MOhm)Current (impedance measurement voltage35…760 V AC 45...65 Hz between phase and phase20…440 V AC 45...65 Hz between phase and neutralfrequency measurement range45…65 Hznumber of inputs0measurement precision Active energy +/- 0.5%Reactive energy +/- 2%Active power +/- 0.5%Apparent power +/- 0.5%Frequency +/- 0.05%Power factor +/- 0.5Current +/- 0.5%Voltage +/- 0.5%Apparent energy +/- 0.5 %Reactive power +/- 2%precision classClass 0.5S active energy compliant with IEC 62053-22number of outputs1 digitalcommunication port protocolModbus RTU and ASCII at 9.6 - 19.2 - 38.4 kbaud odd/even or none - 2 wires, 2500 V insulationJBUScommunication port protocolRS485data loggingTime indicationMin/max of instantaneous valuesconnections - terminalsVoltage circuit: screw terminal4Control circuit: screw terminal2 Currenttransformer: screw terminal6I/O circuit: screw terminal6RS485 connection: screw terminal4InstallationBuilt-insupport assemblyStructureReference standardsUL 61010-1CEI EN 50470-3CEI EN 50470-1IEC 62053-22 :2020IEC 60529IEC 62053-24IEC 61557-12:2015IEC 62053-23:2020IEC 62052-11:2020IEC 62052-3 1:2015 Product certificationsCE conforming to IEC 61010-1CULus conforming to UL 61010-1width96 mmdepth72 mmheight96 mmproduct weight380 g

Read more less

Schneider-Electric Vigirex RH99P 220/240VAC R.M 56273  RH99P is a front panel mounting differential protection relay. Protects from direct or indirect contact, fire hazards and motors. Measures the differential current in an electrical system across the associated toroid. PresentationRangeVigiPacTDevice nameRH99PProduct type Residual current protection relayrelay applicationProtection relayInstallationFront paneltype of differential protectionType AType of regulationSelectortype of residual differential sensitivity adjustmentAdjustable, 9 valuesEarth-leakage sensitivity0.03…30 AEarth-leakage time delayInstant for 0.03 A Adjustable, 9 values ​​0…4.5 s for 0.03…30 ACurrent sensors compatibilityVigiPacT TOA differential current sensorVigiPacT A differential current sensorVigiPacT L sensor differential current Conventional thermal current in enclosure [Ithe] 8 AMinimum load10 mA at 12 VRated supply voltage [Us]220. ..240 V AC 50/60 Hz 55...110%power consumption VA 4 VAMonitored distribution system1000 V - AC at 50/60 Hz (maximum) 1000 V - AC at 400 Hz (maximum)grounding system

Read more less

Schneider Electric Wireless PowerTag F63A 3PN upstream downstream A9MEM1570 PowerTag Energy F63 1P+N 110V is a wireless communication energy sensor. With its Flex design, it is dedicated to 3P+N devices, with rated current less than or equal to 63 A. It must be associated with a concentrator or gateway to provide circuit monitoring and diagnosis up to the load level. It is designed specifically for energy management, load monitoring and power availability applications. Includes accurate real-time measurements of active energy, active power, and voltage and power factor. In case of power failure, it sends voltage loss alarm and current value per phase before shutting down. PowerTag Energy 63A complies with IEC 61557-12. It's a PMD-i/DD/K55/1. The performance category is class 1. The maximum current of Imax is 63 A. The Base current Ib is 10 A. The saturation current is 130 A and the starting current Ist is 40 mA. The rated voltage Un is phase to neutral from 220VAC to 240VAC +/- 20% and phase to phase from 380VAC to 415VAC +/- 20%. The maximum consumption is less than or equal to 2 VA. It can be mounted on the top or bottom of the protection device. The color of the product is white (RAL 9003). The weight is 40 g. The degree of protection is IP20 and IK05. The operating temperature is between -25°C and +60°C. The storage temperature is between -40°C and +85°C. Mounting System With Screws: (clamps)Electrical Connection (VoltageSensing & Power Supply): Cables with cable endsWire Section: 1 rigid cable 1.5…16 mm²2 stranded cable 1.5…2.5 mm²2 rigid cable 1.5…2.5 mm²1 stranded cable 1.5…16 mm²Cable length: 0 ,25 mSupply Voltage: 220...240 V AC, +/- 20 %, phase to neutral380...415 V AC, +/- 20 %, phase to phaseMains Frequency: 50 Hz60 HzMaximum Power Consumption: 2 VAReference Standards: IEC 61557-12IEC 61010-1IEC 61010-2-030IEC 61326-1ETSI EN 300 328ETSI EN 301 487-1Height Sensing element: 20 mmWidth Sensing element: 54 mmDepth Sensing element: 46.6 mm

Read more less

Schneider-Electric Energy sensor, PowerTag Flex (free mounting) 160A 3P/3P+N upper and lower position energy, PowerTag Flex (free mounting) 160A 3P/3P+N upper and lower position A9MEM1580 PowerTag Energy F160 3P/3P+N is an energy sensor for wireless communication. With its Flex design, it is dedicated to 3P and 3P+N devices, with 25 to 27 mm pitch between phases, with rated current up to 160 A.  PresentationProduct rangePowerLogicProduct namePowerTag F160Product type Monitoring sensorPoles3P3P + NMaximum current [Imax]160 Aproduct for specific applicationsEnergy managementOverload alarmPower factorLoad monitoringCircuit monitoringconcentrator compatibilityActi9 PowerTag Link CActi9 PowerTag LinkActi9 PowerTag Link HDHarmony Hub"EcoStruxure Panel Server Universal""EcoStruxure Panel Server Advanced"PrismaSet Activerange compatibilityActi9 Acti9 C120Acti9 Acti9 NG125 Compact Compact NSXmTeSys TeSys GV4Compact ComPacT INSActi9 Acti9 iSWActi9 Acti9 iSW-NAActi9 Acti9 iIDPowerPact PowerPact Bmeasurement type Active and reactive energyApparent energyActive and reactive powerApparent powerCurrentVoltagePower factorInternal temperatureFrequencyaccuracy classClass 1 active energy conforming to IEC 61557-12Class 2 reactive energy conforming to IEC 61557-12Class 2 apparent energy conforming to IEC 61557- 12Class 1 active power conforming to IEC 61557-12Class 2 reactive power conforming to IEC 61557-12Class 2 apparent power conforming to IEC 61557-12Class 1 current conforming to IEC 61557 -12Class 0.5 voltage conforming to IEC 61557-12Class 1 power factor conforming to IEC 61557-12Class 0.5 frequency conforming to IEC 61557-12

Read more less

Schneider-Electric power link-TCP/IP WLESS 20POWERTAG A9XMWD20 This Acti9 PowerTag Link is an intelligent wireless communication module to Modbus TCP/IP concentrator. Must be paired with a PowerTag wireless communication energy sensor to provide circuit monitoring and diagnosis down to load level. Presentationrange of productActi9Product nameActi9 PowerTag LinkProduct typeIntelligent communication moduleDevice namePowerTag LinkApplication typeBasic measurement Energy EAdvanced load monitoring E, U, I, P, PFLoad alarmMax number of connected devicesUp to 20 wireless devicesmaximum current supplied 2 ANominal supply voltage [Us]110... 230 V AC +/- 15 %connectivity to devicesWireless monitoring sensorcommunication serviceEthernet Modbus TCP/IP serverWeb server web serverIntegrated web pageBMS compatibletransmission support mediumRadio frequency 2.4…2.4835 GHz PowerTag 20web servicesWeb page Technical characteristicsSpecific application I/OTotal pulse counterabsorbed power VA 5 VAImmunity to microinterruptions 10 ms

Read more less