SCHNEIDER ELECTRIC DALI 2 GATEWAY PRO 1CH/64 SPACELOGIC KNXMTN67250101 The SpaceLogic KNX Gateway Pro DALI controls electronic ballasts with the DALI interface via the KNX communication bus. The gateway is a certified DALI 2.0 multi-master. The gateway supports KNX longframe communication and is compatible with KNX Security devices/telegrams and can be activated in the ETS 5 software. Furthermore, access to the device itself (e.g. for a download) is protected by KNX Security. Click here for 360 degree view of SCHNEIDER ELECTRIC MTN6725-0101

Read more less

Schneider-electric Wiser for KNX logic controller  LSS100100 Wiser For KNX. Formerly known as spaceLYnk, it is the easiest way to view and control a complete home automation solution in KNX and Modbus networks. Wiser for KNX can be used in different ways. First of all as a user interface for viewing and controlling relevant information on mobile devices. Alternatively, as a gateway to translate and enable communication between different products. Finally, as an aggregator to store, analyze and send data (.csv files, for example) or as an event controller that sends emails in case of problems. Technical data PresentationProduct Name Wiser for KNXProduct Type Logic controllerProtocol Port Communication SystemBACnetKNXIP (Internet Protocol)ModbusNominal Power Supply Voltage [Us]24 V DCPower Absorption W 2 WLed Indicator LED (green)load on CPU: LED (green) /red)KNX power supply/reset:Interface 1 RJ451 RS4851 RS2321 TP-UART2Ethernet port 10BASE-T/100BASE-TXIntegrated Connection Type 1 USB 2.0 portControl Type RESET ButtonConnections - Terminals KNX bus: bus terminals 2 cables 0.8 mm²Power supply: clamp terminal 1.5 mm²Serial: clamp terminal 1.5 mm²Installation DIN railHeight 90 mmWidth 52 mmDepth 58 mm

Read more less

SCHNEIDER ELECTRIC spaceLYnk logic controllerLSS100200 SpaceLYnk by Schneider Electric is the easiest way to build complete building automation solutions for commercial segments. Complete automation solution for small to medium-sized buildings with a complete architecture including KNX, DALI control, metering (Modbus, Smartlink RTU and IP offering) and boiler management (SSL). Complete automation solution for large buildings with a complete architecture managed by BMS of Schneider Electric and KNX, DALI control and measurement (Modbus, Smartlink RTU and IP offering). SpaceLYnk can be used as a gateway to translate and enable communication between different products and as an aggregator to store, analyze and send data (.csv files, for example). It can also be used as a user interface for displaying relevant information on mobile devices and as an event checker that sends emails in case of problems. Applications: logical functions. SCADA WEB visualization for PC and touch devices. Cross-standard gateway between KNX and Modbus RTU/TCP. BACnet Server (500 points). Integration with third party devices over RS-232 (IR, AV). Programming. Camera streaming. Data logger with trends. Pre-made Modbus models. Easy blocking programming. Up to 50 users with different logins and passwords. BACnet certified BACnet Application Specific Controller (B-ASC). New icons. Supply voltage: 24 V DC. Power consumption: 2W. LED indicator 1: Green LED (CPU load). LED indicator 2: Green LED (Operation) or Red LED (Reset). Interface: 1 KNX, 1 10BaseT/100BaseTX, 1 RS-485 (including 47K Ohm bias resistors, without termination). 1 RS-232, 1 USB2.0, 1 reset button. Terminal: KNX bus: 2 x 0.8 mm bus connection terminal. Power supply: clamp, 0.5mm²-1.5mm². Serial: terminal, 0.5 mm²-1.5 mm². Operation: -5 °C to +45 °C. Environment: Can be used at heights up to 2000 m above sea level (SLM). Max. humidity: 93%, non-condensing. Dimensions: 90 x 52 x 58 mm (H x W x D). Device width: 3 modules, approx. 54 mm. Note: Views can be automatically generated for smartphones, tablets and touch panels using the EConfigure KNX Lite software (LSS900100).

Read more less