ITALWEBER

Italweber Fus NH3 KTF gG 500A 500V, 1530500 Body in steatite with high thermal and mechanical resistance. The fusible elements of copper or silver-plated copper are soldered to the contact blades, inserted into the fusible body closed with gaskets and attachment plates, everything is filled with quartz sand. The NH Kombi fuses are equipped with a double trip signaling device located in the central part and in the upper part. Breaking capacity: 100/120kA. NH kombi and NH/I 500V fuses - TYPE gG. Size: NH-3.

Read more less

Italweber Fus NH00 KTF gG 160A 690V 1600660  NH-00 knife fuse - Type: standard - Curve: gG - Current = 160A - Voltage = 690V.

Read more less

Italweber 1602035NH-00C knife fuse - Type: standard - Curve: aM - Current = 35A - Voltage = 690V

Read more less

Italweber 0307200Fast-acting steatite fuses 6.3x32 HF. The 6.3x32 fuses of the “HF” and “HT” series have the same operating characteristics as the “F” and “T” series glass fuses, adding to these a high breaking capacity (1500A).

Read more less

Italweber 1431004 Cylindrical fuse 14 x 51 mm - Type: CH14 - Curve: gG - Current = 4A - Voltage = 690V

Read more less

Italweber 1505050 Body in steatite with high thermal and mechanical resistance. The copper or silver-plated copper fuse elements are soldered to the contact blades, inserted into the closed fuse body with gaskets and hooking plates, the whole is filled with quartz sand. NH Kombi fuses are equipped with a double tripping signalling device located in the central and upper part. Breaking capacity: 100/120kA. NH kombi and NH/I 500V fuses - Type gG. Size : NH-0

Read more less

Italweber 0900144 Panel fuse holder - For 5 x 20 mm fuses - Current = 6.3A - Voltage = 250V

Read more less

Italweber 1635040 Blade type fuse NH-1 - Type: standard - Curve: gG - Current = 40A - Voltage = 800V

Read more less

Italweber 1510907 NH Kombi and NH/i 500V fuses - type gG. NH industrial fuses of type gG are normally used for the protection of cables, power lines and equipment against overloads and short circuits. NH Kombi fuses are equipped with a double tripping signaling device, one of which is located in the central part of the fuse, while the other is located in the upper part. The latter device can be associated with a microswitch to obtain a remote signal of the intervention. NH/I fuses provide additional protection against accidental contact because they are made by placing insulating plastic plates near the fuse blades. Size: NH-1 with insulated plates. In: 200A.

Read more less

Italweber 1221004 The body of the Diazed “D” series fuses is made of steatite with high resistance to thermal and dynamic changes. The fuse element is made of a specially sized copper foil and the nickel-plated brass capsules are pressure mounted on the body of the fuse. Fast D fuses. size: D II / DT II

Read more less

Italweber 0345025 Miniature fuses "HF"-"HT"-"FF" series in steatite

Read more less

Italweber V01 Contact and power elements. Description: Screw terminals. Function: 1NC. IP20. When using closed eyelet lugs, remove the guard

Read more less

Italweber PF-090TRIP65 insulating pushbutton panels. Thermoplastic and metal buttons, 10A - 380V. Description: Red axial mushroom.

Read more less

Italweber V10 Contact and power elements. Description: Screw terminals. Function: 1NO. IP20. When using closed eyelet lugs, remove the coloured guard.

Read more less

Italweber 4200108 Magneto-thermal type motor protector - Model: ESMS1 - Rated current: 4A

Read more less

Italweber 0910488  

Read more less

Italweber 31922Fuse holder for class J fuses - Type: three-pole - For currents from 35A to 60A

Read more less

Italweber 4290021 Wall housing - Model: GES-1 - Degree of protection: IP55

Read more less

Italweber 0110500Glass fuses of the 5x20T series, made in a glass tube with nickel-plated brass contacts. They have a delayed tripping curve (T = Timedelay), and are therefore suitable for the protection of circuits and equipment that have inrush currents, such as small motors, transformers, etc. The nameplate data is marked on the metal contacts of the fuse: manufacturer's logo, nominal current and voltage values, acronym indicating the interrupting capacity and any product approvals.

Read more less

Italweber 1612200NH-1 knife fuse - Type: standard - Curve: aM - Current = 200A - Voltage = 690V

Read more less

Italweber 1232063The body of the Diazed “D” series fuses is made of steatite with high resistance to thermal and dynamic changes. The fuse element is made of a specially sized copper foil and the nickel-plated brass capsules are pressure mounted on the body of the fuse. D gG time delay fuses. size: D III / DT III

Read more less

Italweber 0105015Glass fuses of the 5x20F series, made in a glass tube with nickel-plated brass contacts. They have a rapid tripping curve (F = Fast), and are therefore suitable for the protection of conductors or equipment with small insertion currents. The nameplate data is marked on the metal contacts of the fuse: manufacturer's logo, nominal current and voltage values, acronym indicating the interrupting capacity and any product approvals.

Read more less

Italweber 1320035The Neozed “NeoD” series fuses have a steatite body filled with quartz sand. A fusion indicator visually indicates that the intervention has taken place. The gG type is used for the general protection of cables and lighting circuits in the civil sector. The gR type is used for the protection of semiconductor devices. NEOD gG fuses

Read more less

Italweber 1222010The body of the Diazed “D” series fuses is made of steatite with high resistance to thermal and dynamic changes. The fuse element is made of a specially sized copper foil and the nickel-plated brass capsules are pressure mounted on the body of the fuse. D gG time delay fuses. size: D II / DT II

Read more less