Description
Schneider Electric Wireless PowerTag F63A 3PN upstream downstream A9MEM1570
PowerTag Energy F63 1P+N 110V is a wireless communication energy sensor. With its Flex design, it is dedicated to 3P+N devices, with rated current less than or equal to 63 A. It must be associated with a concentrator or gateway to provide circuit monitoring and diagnosis up to the load level. It is designed specifically for energy management, load monitoring and power availability applications. Includes accurate real-time measurements of active energy, active power, and voltage and power factor. In case of power failure, it sends voltage loss alarm and current value per phase before shutting down. PowerTag Energy 63A complies with IEC 61557-12. It's a PMD-i/DD/K55/1. The performance category is class 1. The maximum current of Imax is 63 A. The Base current Ib is 10 A. The saturation current is 130 A and the starting current Ist is 40 mA. The rated voltage Un is phase to neutral from 220VAC to 240VAC +/- 20% and phase to phase from 380VAC to 415VAC +/- 20%. The maximum consumption is less than or equal to 2 VA. It can be mounted on the top or bottom of the protection device. The color of the product is white (RAL 9003). The weight is 40 g. The degree of protection is IP20 and IK05. The operating temperature is between -25°C and +60°C. The storage temperature is between -40°C and +85°C.
Mounting System With Screws: (clamps)
Electrical Connection (Voltage
Sensing & Power Supply): Cables with cable ends
Wire Section: 1 rigid cable 1.5…16 mm²
2 stranded cable 1.5…2.5 mm²
2 rigid cable 1.5…2.5 mm²
1 stranded cable 1.5…16 mm²
Cable length: 0 ,25 m
Supply Voltage: 220...240 V AC, +/- 20 %, phase to neutral
380...415 V AC, +/- 20 %, phase to phaseMains Frequency: 50 Hz
60 Hz
Maximum Power Consumption: 2 VA
Reference Standards: IEC 61557-12
IEC 61010-1
IEC 61010-2-030IEC 61326-1
ETSI EN 300 328
ETSI EN 301 487-1
Height Sensing element: 20 mm
Width Sensing element: 54 mm
Depth Sensing element: 46.6 mm
