Phoenix Contact trio2-diode/12-24DC/2X10/1X20 2907380  Redundancy module, 12 V - 24 V DC, 2x 10 A, 1x 20 A. Technical data Input dataDC operationInput voltage range 12 V DC ... 24 V DCInput voltage range 10 V DC ... 30 V DCVoltage type of supply voltage DCReverse polarity protection Rated input current I 2x 10 A (-25 °C ... 60 °C) N1x 20 A (-25 °C ... 60 °C)Max current Imax 2x 15 A (-25 °C ... 40 °C)1x 30 A (-25 °C ... . 40 °C)Rated input current I 2x 10 A (-25 °C ... 60 °C) N1x 20 A (-25 °C ... 60 °C) Output dataEfficiency > 97 %Output voltage UIn -Rated output current (IN) 20 A10 A Derating 60 °C ... 70 °C (2.5 %/K) InputConnection Push-in connectionRigid conductor section min. 0.2 mm²Rigid conductor section max. 4 mm²Flexible conductor section min. 0.2 mm²Flexible conductor section max. 2.5 mm²Conductor cross section AWG min. 16Conductor cross section AWG max. 12Strip length 10 mm

Read more less

Phoenix Contact 2866763 Power supply switching QUINT POWER, Screw connection, DIN rail mounting, SFB Technology (Selective Fuse Breaking), input:  1  phase, output: 24 V  DC / 10A Technical data  Input data  AC Operation  Input voltage range 100 V AC ... 240 V AC -15 % / +10 %  Input voltage range 85 V AC ... 264 V AC  Derating IStat. Boost < 100 V AC (1 %/V)  DC input voltage range 110 V DC ... 350 V DC (typ. 90 V DC (UL 508: ≤ 300 V DC))  Max. voltage resistance 300 V AC  120 V AC Typical national mains voltage  230V AC  AC supply voltage voltage type  Inrush current < 15 A  Integral of the peak inrush current (I2t) < 1.5 A2s  Inrush current pulse limitation 15 A  Frequency range AC 45 Hz ... 65 Hz  Frequency range DC 0 Hz  > 36 ms (120 V AC) Mains failure coverage time  > 36 ms (230 V AC)  4 A (100 V AC) Current consumption  1.7A (240VAC)  Rated power consumption 302 VA  Protection circuit Transient overvoltage protection; Varistor,  gas discharger  Power factor (cos phi) 0.85  Typical ignition time < 0.15 s  Input fuse 10 A (delayed, internal)  Permitted prefuse B10 B16 AC:  DC DC pre-fuse permitted: Insert a suitable fuse  Selecting a suitable fuse for input protection 10 A ... 20 A (Characteristic B, C, D, K)  Leakage current to PE < 3.5 mA

Read more less

Phoenix Contact 2800186 Universal plug-in lightning/surge arrester consisting of varistor for single-phase power networks with separate N and PE (3-conductor system: L1, N, PE), with remote signal contact. Technical data Product type Combination dischargers VALVETRAB MS product family IEC test class I / II T1 / T2 Type EN T1 / T2 IEC TT Power Supply System TN-S Type Two-component plug-in guide module Number of poles 2 Signaling of surge protection failure optical, FM contact 

Read more less

Phoenix Contact 2961105 Miniature plug-in power relay, with power contact, 1 changeover contact, input voltage 24 V DC Technical dataProduct type Single relayOperation 100 % EDMechanical life 2x 107 operating cyclesData maintenance status Last data management date 18.06.2024Article revision 02Insulation characteristicsOvervoltage category IIIPollution degree 3Electrical characteristicsMaximum dissipated power in nominal conditions 0, 17 WTest voltage (Wind/Contact) 4 kV AC (50 Hz, 1 min., winding/contact)

Read more less

Phoenix contact FBS 2-10 - Plug-in jumper 3005947  Plug-in bridge, pitch: 10.2 mm, number of positions: 2, color: red. The 2 to 50 pole jumpers allow you to jumper up to 50 complete terminals in a single operation in the two compartments of the CLIPLINE system.

Read more less

Phoenix Contact Security module 1079241 Axioline Smart Elements, Digital input module, Functional safety, PROFIsafe, exclusively for connection to Phoenix Contact or Siemens controllers, Safe digital inputs: 4 (Assignment to 2 channels), 8 (Assignment to 1 channel), 24 V DC, connection technology: 3-wire, degree of protection: IP20      

Read more less

Phoenix contact PTTB 4 - Double-level clamp 3211786  Double-level terminal block, rated voltage: 500 V, rated current: 28 A, connection type: Push-in connection, 1st and 2nd level, Cross section: 4 mm2, cross section: 0.2 mm2 - 6 mm2, mounting type: NS 35/7.5, NS 35/15, colour: grey. The push-in connection terminals are characterized not only by the features of the complete CLIPLINE system, but also by the simple, tool-free wiring of conductors with cable lugs or rigid conductors. The compact shape and front connection allow wiring in minimal space. In addition to the testing option in the double function compartment, an additional test socket is available for each terminal.

Read more less

Phoenix Contact 1411318 Good shielding effect in case of electromagnetic disturbances.

Read more less

Phoenix Contact 3030284The 2 to 50 pole jumpers allow you to jumper up to 50 complete terminals in the two compartments of the CLIPLINE system in a single operation.

Read more less

Phoenix Contact 29004456.2 mm PLC base terminal block with Push-in connection, without equipment. relay or solid state relay, for mounting on a DIN rail, NS 35/7.5, 1 voltage exchange contact. input voltage: 24 V DC

Read more less

Phoenix Contact 3208184End plate, length: 54 mm, width: 2.2 mm, height: 24.3 mm, color: grey

Read more less

Phoenix Contact 3038558 End plate, length: 91.5 mm, width: 2.2 mm, height: 47.5 mm, colour: gray

Read more less

Phoenix Contact 3270221 Power terminals in blue design for 24 Volt DC power supplies. Bridgeable potential distributor with the possibility of supplying up to 6 mm². High contact quality thanks to Push-in technology, which replaces Wire-Wrap, Termi-Point, etc. Tool-free wiring in very narrow spaces thanks to compact dimensions.

Read more less

Phoenix Contact 1182087Support frame for Phoenix Contact industrial connectors Type/model: PHC1182087 - HC-M-B06-MFH-H MODULE HOLDER

Read more less

Phoenix Contact 3211942In addition to the CLIPLINE complete system features, the push-in connection terminals also feature simple, tool-free wiring of conductors with ferrules or solid conductors. The compact design and front connection enable wiring in a minimum of space. In addition to the testing option in the double function compartment, an additional test socket is available for each terminal.

Read more less

Phoenix Contact 2800929Help form. With bridging compartments. Load up to 41 A with double bridging of the power supply.

Read more less

Phoenix Contact 2907457 Tool-free assembly. Available in widths from 12.5 mm to 90 mm, expandable by modules.

Read more less

Phoenix Contact 2900364 Functional plug-in jumpers. Zero-voltage switch with AC output. Built-in input circuit. High breaking capacity.

Read more less

Phoenix Contact 3208155In addition to the CLIPLINE complete system features, the push-in connection terminals also feature simple, tool-free wiring of conductors with ferrules or solid conductors. The compact design and front connection enable wiring in a minimum of space. In addition to the testing option in the double function compartment, an additional test socket is available for each terminal.

Read more less

Phoenix Contact 2702356 No need for additional sensors. Delay time can be set from 0.5 s ... 20 s. 50 mV adjustable switching threshold... 500 mV. 1 safety contact, 2 digital signal outputs.

Read more less

Phoenix Contact 2908181 Miniature plug-in relay, with power contact, 2 changeover contacts, test button, mechanical status signal, polarity: bipolar, input voltage: 24 V DC

Read more less

Phoenix Contact 3036152 In addition to individual continuous bridgeing, the double jumping compartment also allows a reduction bridge-by-side for smaller spring clamps. The flexible possibilities of reducing bridges in the complete CLIPLINE system can be found in the chapter Accessories for the complete CLIPLINE terminal system.

Read more less

Phoenix Contact 3026463They are suitable for direct mounting and on busbars. Knurled screw.

Read more less

Phoenix Contact 3009163Low contact resistances thanks to grooves in the contact surface. Self-locking of the screws thanks to spring elements in the body of the clamp.

Read more less