FINDER SWITCHING POWER SUPPLY 50W 12VDC (4.5A) CHARGE. 785012301202 Type 78.50 low profile, high efficiency, modular switching power supply with 12 V DC output at 50 W for electrical panels.It features an adjustable voltage between 12 and 14V and ZVS technology. Features: High efficiency (up to 91%) Low stand-by consumption ( Internal thermal protection, with output shutdown Short circuit protection: Hiccup mode (automatic recovery) Overvoltage protection: Varistor Flyback circuit type ZVS (Zero-voltage-switching) technology, in a quasi-resonant way Complies with EN 60950-1 and EN 61204-3 standards Parallel connection for automatic redundancy: with OR-IN diode Dual and series connection Small dimensions: 70 mm (4 modules) wide, 61 mm deep Suitable for mounting on 35 mm rail (EN 60715) ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, shuttersCranesControl panels, distributionPump control panels

Read more less

Cabur Single phase power supplies XCSF120C  Single phase power supply IN: 120-230 Vac /OUT: 24 Vdc 5 A. Single phase and DC inputProtection against short circuit, overload and surges in and outOver-temperature protectionSuitable for applications requiring high reliability and performanceIntelligent alarm contact, signal when output voltage drops more than 10%High overload capacity to ensure selectivity of protections and start of heavy loads Technical data Supply Voltage Type: AC /DC Output voltage 1: 24...24 V Max. output current 1: 5 A Output voltage adjustable: no Short circuit proof: yes Rated supply voltage AC 50 Hz: 90...264 V Rated supply voltage AC 60 Hz: 90...264 V Rated DC supply voltage: 100...345 V Power consumption: 13 VA Output power: 120 W Electrical connection type: Clamp connection Possibility of rail mounting: yes Suitable for modular mounting: no Width: 39 mm Height: 115 mm Depth: 128 mm Suitable for safety functions: yes Degree of protection (IP): IP20

Read more less

6EP4133-0GA00-0AY0 | SIEMENS SITOP BAT1600 DC 24 V 3,2 Ah Pb modulo batteria con batterie al piombo sigillate esenti da manutenzione per SITOP UPS1600

Read more less

1606-XLB120E | ROCKWELL AUTOMATION Alimentatore di base: • Ingresso di selezione automatica CA da 100… 120 V / 200… 240 V CA. • Larghezza di 39 mm • Efficienza fino al 92,3% • Piena potenza tra -10… + 55 ° C (14… 131 ° F) • Contatto relè DC-OK incluso

Read more less

Phoenix Contact trio2-diode/12-24DC/2X10/1X20 2907380  Redundancy module, 12 V - 24 V DC, 2x 10 A, 1x 20 A. Technical data Input dataDC operationInput voltage range 12 V DC ... 24 V DCInput voltage range 10 V DC ... 30 V DCVoltage type of supply voltage DCReverse polarity protection Rated input current I 2x 10 A (-25 °C ... 60 °C) N1x 20 A (-25 °C ... 60 °C)Max current Imax 2x 15 A (-25 °C ... 40 °C)1x 30 A (-25 °C ... . 40 °C)Rated input current I 2x 10 A (-25 °C ... 60 °C) N1x 20 A (-25 °C ... 60 °C) Output dataEfficiency > 97 %Output voltage UIn -Rated output current (IN) 20 A10 A Derating 60 °C ... 70 °C (2.5 %/K) InputConnection Push-in connectionRigid conductor section min. 0.2 mm²Rigid conductor section max. 4 mm²Flexible conductor section min. 0.2 mm²Flexible conductor section max. 2.5 mm²Conductor cross section AWG min. 16Conductor cross section AWG max. 12Strip length 10 mm

Read more less

Weidmuller pro eco 120W 24V 5A 1469480000  Power supply, switching power supply, 24 V. Technical data TemperaturesStorage temperature -40 ºC...Operating temperature -25 ‍C...70 _ C EntranceCurrent consumption AC 1.26 A @ 230 V AC / 2.24 A @ 110 V ACCurrent consumption DC 0.39 A @ 370 V DC / 1.16 A @ 120 V DCInput voltage range AC 85...264 V AC (100 V AC thermal drift)Frequency range AC 47...63 HzInput voltage range DC 80...370 V DC (Derating @ 120 V DC)Peak current max. 40 AInput frequency 47...63 HzInput fuse (internal) YesRated power consumption 137,9 VARecommended prefusible 4 A / DI, fuse6 A, car. B, circuit breaker3...5 A, Car. C, circuit breakerProtection against Varistore input surgesConnection technology Screw connectionRated input voltage from 100 to 240 V AC OutputCapacitive load UnlimitedContinuous output current at Unominale 5 A @ 55Rated output current for Unom. 5 A at 55 solidCResidual ripple, break peaks < 50 mvpp @ 24 V DC, INParallelability yes, max. 5Power output 120 W

Read more less

Weidmuller pro eco 240W 24V 10A 1469490000  Power supply, switching power supply, 24 V. Technical data TemperaturesOperating temperature -25 ‍C...70 _ CStorage temperature -40 ºC...EntranceCurrent consumption AC 1,23 A @ 230 V AC / 2,47A @ 110 V ACCurrent consumption DC 1.18 A @ 370 V DC / 2.4A @ 120 V DCInput voltage range AC 85... 264 V AC (100 V AC derating)Frequency range AC 47...63 HzInput voltage range DC 80... 370 V DC (Derating @120 V DC)Peak current max. 15 AInput frequency 47...63 Hz Input fuse (internal) YesRecommended prefusible 4 A / DI, fuse element 10 A, car. B, circuit breaker3...4 A, Car. C, circuit breakerConnection technology Screw connectionRated input voltage 100...240 V AC (wide range input)OutputCapacitive load UnlimitedContinuous output current @ UNominal 10 A @ 55 _C, 7.5 A @ 70Nominal current output @ UNom 10 A @ 55 ¹ CResidual ripple, break peaks < 50 mvpp @ 24 V DC, INParallelability yes, max. 5Protection against overload YesProtection against reverse voltage YesConnection technology Screw connectionAscent time 100 msOutput voltage 24 VOutput voltage 22...28 V (adjustable with potentiometer)Rated output voltage 24 V DC 1 %

Read more less

FINDER SWITCHING POWER SUPPLY FOR OPTA 781212302482 Switching power supply power absorption: 28.2 VA. suitable for series installation: yes suitable for safety functions: no width in subdivision units: 1 type of supply voltage: AC/DC power output: 12 W. regulated output voltage: yes Electrical connection: screw connection mounting on carrier rail possible: yes wall mounting possible: no stabilized: yes 1st output voltage: 24 V. adjustable output voltage: no nominal supply voltage for AC 50 Hz: 110 to 240 V. nominal supply voltage for DC: 220 V. short-circuit proof: yes performance level according to EN ISO 13849-1: without max. output current 1: 0.63 A. rated value output voltage 1: 24 V. rated value output current 1: 0.5 A. SIL according to IEC 61508: without Degree of protection: IP20 Features: Low power consumption in stand-by ( Internal thermal protection, with output shutdown Short circuit protection: Hiccup mode (automatic recovery) Overvoltage protection: Varistor Flyback circuit type Complies with EN 60950-1 and EN 61204-3 standards Parallel connection for automatic redundancy: with OR-IN diode Dual and series connection Suitable for mounting on 35 mm rail (EN 60715) Versions also available:-78.12….1200 with 12 V DC output. 12 W, for general applications with 12 V DC loads-78.12….2402 with 24 V DC output, 12 W, SELV, LED Modular driver with 24 V DC output   ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, roller shuttersCranesControl panels, distributionPump control panels

Read more less

FINDER SWITCHING POWER SUPPLY 12W 24VDC (0.5A) 781212302400 Switching power supply power absorption: 28.2 VA. suitable for series installation: yes suitable for safety functions: no width in subdivision units: 1 type of supply voltage: AC/DC power output: 12 W. regulated output voltage: yes Electrical connection: screw connection mounting on carrier rail possible: yes wall mounting possible: no stabilized: yes 1st output voltage: 24 V. adjustable output voltage: no nominal supply voltage for AC 50 Hz: 110 to 240 V. nominal supply voltage for DC: 220 V. short-circuit proof: yes performance level according to EN ISO 13849-1: without max. output current 1: 0.63 A. rated value output voltage 1: 24 V. rated value output current 1: 0.5 A. SIL according to IEC 61508: without Degree of protection: IP20 Features: Low power consumption in stand-by ( Internal thermal protection, with output shutdown Short circuit protection: Hiccup mode (automatic recovery) Overvoltage protection: Varistor Flyback circuit type Complies with EN 60950-1 and EN 61204-3 standards Parallel connection for automatic redundancy: with OR-IN diode Dual and series connection Suitable for mounting on 35 mm rail (EN 60715) Versions also available:-78.12….1200 with 12 V DC output. 12 W, for general applications with 12 V DC loads-78.12….2402 with 24 V DC output, 12 W, SELV, LED Modular driver with 24 V DC output   Applications Building automation Elevators - lifts Automation of awnings, shutters, roller shutters Crane Control panels, distribution Pump control panels

Read more less

9928890012 | WEIDMULLERAlimentatore switching monofase Connect Power INSTAPOWER, in custodia di installazione. Gli alimentatori INSTAPOWER sono universali grazie all'ampio range d'ingresso da 85 V AC a 265 V AC.

Read more less

8575320000 | WEIDMULLERAlimentatore switching, non stabilizzato, 24 V

Read more less

2838510000 | WEIDMULLER Alimentatore corrente continua PRO BAS 480W 48V 10A Dati tecnici Temperatura di stoccaggio: -40 °C...85 °CTemperatura di esercizio: -25 °C...70 °CAvvio: ≥ -40 °CUmidità: 5…95 % umidità relativa, senza condensa Dati input: Gamma di tensione di ingresso AC: 85...264 V AC (derating a 100 V AC)Consumo di corrente in relazione alla tensione di ingressoTipo di tensione: ACTensione di ingresso: 230 VCorrente di ingresso: 2,26 ATipo di tensione: ACTensione di ingresso: 115 VCorrente di ingresso: 4,58 ATipo di tensione: DCTensione di ingresso: 120 VCorrente di ingresso: 4,42 A Dati di output :  Carico capacitivo: 5,5 mFSistema di connessione: Connessione a viteCorrente di uscita continua @ UNominale: 10 A @ 55 °C, 6,25 A @ 70 °CTempo di ponteggio in caso di guasto della reteTempo di ponteggio in caso di guasto della rete, min.: 20 msTipo di tensione di ingresso: ACTensione di ingresso: 120 VCorrente di uscita: 10 ATensione di uscita: 48 VTempo di ponteggio in caso di guasto della rete, min.: 20 msTipo di tensione di ingresso: ACTensione di ingresso: 230 VCorrente di uscita: 10 A

Read more less

2838490000 | WEIDMULLER Alimentatore corrente continua PRO BAS 480W 48V 10A          Dati tecnici Temperatura di stoccaggio: -40 °C...85 °CTemperatura di esercizio: -25 °C...70 °CAvvio: ≥ -40 °CUmidità: 5…95 % umidità relativa, senza condensa

Read more less

2838480000 | WEIDMULLER Alimentatore corrente continua PRO BAS 480W 24V 20A Dati tecnici Temperatura di stoccaggio: -40 °C...85 °CTemperatura di esercizio: -25 °C...70 °CAvvio: ≥ -40 °CUmidità: 5…95 % umidità relativa, senza condensa

Read more less

2838470000 | WEIDMULLER Alimentatore corrente continua PRO BAS 240W 48V 5A          Dati tecnici Temperatura di stoccaggio: -40 °C...85 °CTemperatura di esercizio: -25 °C...70 °CAvvio: ≥ -40 °CUmidità: 5…95 % umidità relativa, senza condensa

Read more less

2838450000 | WEIDMULLER Alimentatori corrente continua PRO BAS 120W 12V 10A     Dati tecnici Temperatura di stoccaggio: -40 °C...85 °CTemperatura di esercizio: -25 °C...70 °CAvvio: ≥ -40 °CUmidità: 5…95 % umidità relativa, senza condensa     

Read more less

2838440000 | WEIDMULLER Alimentatore corrente continua PRO BAS 120W 24V 5A          Dati tecnici Temperatura di stoccaggio: -40 °C...85 °CTemperatura di esercizio: -25 °C...70 °CAvvio: ≥ -40 °CUmidità: 5…95 % umidità relativa, senza condensa

Read more less

2838420000 | WEIDMULLER Alimentatore corrente continua PRO BAS 60W 12V 5A          Dati tecnici Temperatura di stoccaggio: -40 °C...85 °CTemperatura di esercizio: -25 °C...70 °CAvvio: ≥ -40 °CUmidità: 5…95 % umidità relativa, senza condensa

Read more less

2838410000 | WEIDMULLER Alimentatore corrente continua Dati tecnici Temperatura di stoccaggio: -40 °C...85 °CTemperatura di esercizio: -25 °C...70 °CAvvio: ≥ -40 °CUmidità: 5…95 % umidità relativa, senza condensa

Read more less

2786250000 | WEIDMULLER Alimentatore corrente continua PRO DC BUFFER 24V 40A     Dati tecnici Temperatura di stoccaggio: -40 °C...85 °CTemperatura di esercizio: -25 °C...70 °CUmidità: 5...95 %, senza condensa    

Read more less

2660200295 | WEIDMULLER Alimentatore corrente continua Dati tecnici Temperatura di stoccaggio: -40 °C...85 °CTemperatura di esercizio: -20 °C...70 °CUmidità: 5…95 % RH  

Read more less

2660200291 | WEIDMULLER Alimentatore corrente continua PRO PM 250W 12V 21A          Dati tecnici Temperatura di stoccaggio: -40 °C...85 °CTemperatura di esercizio: -20 °C...70 °CUmidità: 5…95 % RH

Read more less

2660200289 | WEIDMULLER Alimentatore corrente continua PRO PM 150W 24V 6.5A          Dati tecnici Temperatura di stoccaggio: -40 °C...85 °CTemperatura di esercizio: -20 °C...70 °CUmidità: 5…95 % RH

Read more less

2660200288 | WEIDMULLERAlimentatore per la fornitura di tensione DC.

Read more less