SIEMENS RCBO 16a MTD 1P+N 1UM 4.5KA TYPE AC 30MA C16                            5SV13131KK16  Compact residual current circuit breaker 1P+N 4.5 kA type AC 30 mA C16. The differential switch is the fault current protection device against accidental contacts. Number of protected poles: 1Rated current: 16 ARated fault current: 0.03 AType differential: ACWith neutral: yesNumber of poles (total) : 2Rated voltage: 230 VRated insulation voltage Ui: 253 VRated impulse voltage resistance Uimp: 4 kVLimiting class: 3Rated breaking capacity according to EN 61009: 4.5 kARated breaking capacity according to IEC 60947-2: 5 kARated short-circuit breaking capacity according to EN 61009-1: 4.5 kASwitch-off characteristics: Non-delayedType voltage: ACTripping characteristic: CWith locking device: yesOvervoltage category: 3Pollution degree: 2Ambient temperature during operation: -25.. .45 °CWidth in number of modules: 1Recessing depth: 70 mmRecess-mountable: yesProtection against unexpected start-up: yesDegree of protection (IP): IP20Connectable single-wire (rigid) conductor section: 0.75...16 mm²Connectable multi-wire (semi-rigid) conductor section: 0.75...16 mm²

Read more less

Siemens 8WH20000AG00feed-through terminals with spring terminal, cross section: 0.5 ... 4 mm2, width: 6.2 mm, colour: gray Connection technology with combinable terminals for various industrial applications and modern installation technique by Siemens. You can decide whether to use the screw, spring, push-in or quick connection techniques: all connection techniques can be freely combined with each other. The registration and test accessories are standardized and usable across the board. With the combinable terminals of Siemens many applications can be realized in industrial, functional and residential buildings. The right connection technology for every need is thus available! The combinable terminals Siemens are characterized above all by the following features: 1. Safe and durable contact. 2. Easy to untie electrical connections such as cables and conductors. 3. Creation of a variety of applications. 4. Convenient and simple mounting technique and connection technique. 5. Wide range of standardized accessories. 6. Reliable safety during installation thanks to touch protection as standard. 7. Optimal technique for your safety - only from Siemens. &DPMD_ACC602_001_000_1001316&

Read more less

6EP4133-0GA00-0AY0 | SIEMENS SITOP BAT1600 DC 24 V 3,2 Ah Pb modulo batteria con batterie al piombo sigillate esenti da manutenzione per SITOP UPS1600

Read more less

Siemens 3RV20111HA10 circuit breaker size S00 for motor protection, CLASS 10 release A 5.5...8 A release N 104 A screw terminal standard switching power SIRIUS 3RV2 circuit breaker For motor protection for safe disconnection in the event of a short circuit and for overload protection of consumers and the system as well as for the safe separation of the system from the mains.\nThe compact and tropicalized circuit breakers are optimized, thanks to their low thermal dispersion, for use in feeders, naturally also for motors IE3/IE4 and equally for DC switching. International approvals (e.g. IEC and UL/CSA) and versions for applications in potentially explosive areas (ATEX or IEC Ex) are obviously available.\nDevice variants for motor protection are available (also with overload relay function ), system protection, short-circuit protection of combined starters, transformer protection. as a main and EMERGENCY STOP switch and for use in IT networks. They are available with screw or spring-loaded terminals for quick, maintenance-free and vibration-resistant connection as well as optionally with a built-in auxiliary switch block.\nAll accessories such as e.g. auxiliary contact blocks, auxiliary releases, signaling contact blocks etc. they are uniformly suitable for all construction sizes. The various power supply options, such as the SIRIUS 3RV29 power supply system, significantly reduce the wiring of the main circuit.\nThe 3RV2 circuit breakers replace the proven 3RV1 series.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 6ED10522MD080BA1LOGO! 12/24RCEO, logic module, PS/I/O: 12/DC 24 V/relay, 8 DI (4 AI)/4 DO, without display, 400 block memory, Ethernet modularity and expandability, integrated Web Server, data log , customized web pages, standard microSD card for LOGO! SOFT Comfort from V8.3, previous projects executable, cloud connection in all LOGO! basic devices 8.3 The LOGO! basic devices 8 with 8 digital inputs and 4 digital outputs and their reduced installation width of only 72 mm, have many well-known functions (current impulse relay, staircase light automation, auxiliary contactor, time relay, etc.) already integrated and freely combinable with each other. The control programs are easily created and simulated on a PC. The respective integrated Ethernet interface allows communication with up to nine LOGO! modules. 8 or SIMATIC S7 systems. With the Web Server, also integrated, the connected users can be monitored and controlled via WLAN or Internet. The user himself can configure web pages, even if he has no knowledge of HTML. Using additional modules, GSM or GPS communication can be implemented as well as integration into a building control system. The LOGO! basic modules 8 are available with and without display for different input voltages as well as with transistor or relay outputs (up to 10 A nominal). Expandable with additional modules up to 24 DI / 20 DQ (8 AI / 8 AQ). Integrated cloud communication. LOGO! 8 can also be expanded with an external Text Display for significant messages in plain text. The backlight color is selectable for optical highlights. Different LOGOs are also available! Power Module for power supply.

Read more less

Siemens 3NW7131SENTRON, fuse holder for cylindrical cartridges, 14x51 mm, 3-pole, In: 50 A, Un AC: 690 V &DPMD_ACC602_001_000_1004330&

Read more less

Siemens 3RT20232AP00Power contactor, AC-3 9 A, 4 kW / 400 V 1 NO + 1 NC, AC 230 V, 50 Hz 3-pole, size S0 spring terminal SIRIUS 3RT2 power contactor for controlling motors.\nThe 3RT2 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. They can be combined in various ways with other components in the starter. Many of the device combinations are already tested at the factory. The contactors offer the optimal connection to the controller for every application (parallel, via AS-i or IO-Link). Integrated auxiliary switch blocks reduce mounting complexity. Front connections simplify simple wiring. The 3RT2 contactors are tropicalized, approved worldwide (e.g. IEC and UL/CSA) and IE3/IE4ready.\nThey are available in various sizes and in a wide power range for AC and DC control. The devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and vibration-resistant connection.\nAll accessories such as e.g. the auxiliary contact blocks, the auxiliary releases etc. they are uniformly suitable for all construction sizes. The available connection modules, function modules and the SIRIUS 3RV29 power supply system significantly reduce the wiring effort.\nThe 3RT2 power contactors replace the proven 3RT1 series (up to 55 kW).\nSimple, efficient, always up-to-date - the SIRIUS. modular system

Read more less

Siemens 3RT20381AG20 Contactor, AC-3, 37 kW / 400 V, 1 NO + 1 NC, AC 110 V, 50 / 60 Hz, 3-pole, size S2, screw terminal SIRIUS 3RT2 power contactor for controlling motors.\nThe 3RT2 contactors are an integral part of the SIRIUS modular system with its products perfectly coordinated with each other. They convince with great power in a compact design and high contact reliability. They can be combined in various ways with other components in the starter. Many of the device combinations are already tested at the factory. The contactors offer the optimal connection to the controller for every application (parallel, via AS-i or IO-Link). Integrated auxiliary switch blocks reduce mounting complexity. Front connections simplify simple wiring. The 3RT2 contactors are tropicalized, approved worldwide (e.g. IEC and UL/CSA) and IE3/IE4ready.\nThey are available in various sizes and in a wide power range for AC and DC control. The devices are available not only with screw terminals but also with spring-loaded terminals for quick, maintenance-free and vibration-resistant connection.\nAll accessories such as e.g. the auxiliary contact blocks, the auxiliary releases etc. they are uniformly suitable for all construction sizes. The available connection modules, function modules and the SIRIUS 3RV29 power supply system significantly reduce the wiring effort.\nThe 3RT2 power contactors replace the proven 3RT1 series (up to 55 kW).\nSimple, efficient, always up-to-date - the SIRIUS. modular system

Read more less

Siemens Simatic ET 200SP HA, Analogue input module 6DL11346JH000PH1 SIMATIC ET 200SP HA, Analog input module, AI 16XTC/8XRTD 2-/3-/4-Wire HA, suitable for Terminal Block H1, M1, Color code CC00, channel diagnostics, 16bit , +/-0.05%, 2-/3-/4-Wire Technical data General informationProduct type designation AI 16 x TC/8xRTD 2-/3-/4-wire HAFirmware version V1.1● Possible FW update YesTerminal block usable terminal block type H1, M1, P0 and N0Color code for module-specificcolor coding plateCC00 Product function● I&M data Yes; I&M0 ... I&M3 Engineering with● STEP 7 TIA Portal configurable/integrated from version V16● STEP 7 configurable/integrated from version V5.6● PCS 7 configurable/integrated by version V9.0● PCS neo configurable/integrated from version V3.0● PROFINET from version GSD/GSD revision GSDML V2.3 Redundancy● Redundancy capabilities Yes; with type TB M1 CiR - Configuration in RUNReparameterization in RUN possible Yes Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC ) 28.8 VReverse polarity protection Yes Input currentCurrent consumption (nominal value) 75 mACurrent consumption, max. 100 mA Power dissipationPower dissipation, typ. 1.8 W Address spaceAddress space per module● Address space per module, max. 64 bytes; + 2 bytes for IQ information Analog inputsNumber of analog inputs● for voltage measurement 16● for measurement with resistance/thermoresistance 8● for measurement with thermocouple 16Allowed input voltage per input in voltage (destructive limit), max.5 VConstant measuring current for resistive transducers, typ. 2 mA

Read more less

SIEMENS THERMIC MAGNETIC SWITCH 400V 6kA  5SL62327BB  Magneto-thermal switch 400V 6kA, 2 poles C, 32A, Italian version. Versionproduct brand SENTRONproduct name Circuit breaker General technical datanumber of poles 2pole design 2 polestrip characteristic class Cmechanical lifespan ( maneuver cycles) typ. 10 000overvoltage category IIIpollution degree 2 Voltagevoltage type of operational voltage ACinsulation voltage (Ui)● for multi-phase operation with AC rated value 440 V Supply voltagesupply voltage with AC nominal value 400 Vfrequency value range of the supply voltage 50/60 Hz Operating voltage● for multiphase operation with AC max. 440 V● with DC rated value max. 72 V Protection classIP protection degree IP20, with connected conductors Switching capacity current breaking capacity● according to EN 60898 rated value 6 kA● according to IEC 60947-2 rated value 6 kAenergy limitation class 3 Dissipationpower dissipation [W] at nominal current value with AC inhot operating state per pole 2.3 Wsuitability for use in Residential Construction / Infrastructure Detailsproduct feature● halogen-free Yes● sealable Yes● silicone-free Yesproduct expansion mountable built-in additionaldevices Yes Connectionsconnectable conductor section rigid wire

Read more less

SIEMENS  CONTACTOR 4KW,1L,DC 24V,S00 VT M.OR. 3RT20161BB411AA0 Power contactor, AC-3e/AC-3, 9 A, 4 kW / 400 V, 3-pole, 24 V DC, auxiliary contacts: 1 NO, screw terminals, frame size: S00, vertical mounting position. Product designation Power contactorproduct type designation 3RT2 General technical datacontactor size S00 product expansion● function module for communication No● auxiliary switch block Yespower loss [W] at nominal current value● with AC in hot operating state 0.9 W● with AC in hot operating state per pole 0.3 W● without the Typical load current value 4 Winsulation voltage● of the main circuit with pollution degree 3 valuenominal 690 V● of the auxiliary circuit with pollution degree 3 valuenominal 690 V Impulse withstand voltage● of the main circuit nominal value 6 kV● of the auxiliary circuit nominal value 6 kVmax. permissible for safe separation between coil andmain contacts according to EN 60947-1 400 V Rectangular wave shock resistance● with DC 6.7g / 5 ms, 4.2g / 10 msshock resistance sine wave● with DC 10.5g / 5 ms, 6.6g / 10 msmechanical lifespan (operating cycles)● of the contactor typ. 30 000 000● of the contactor with mounted auxiliary switch blocksuitable for the electronics typ. 5 000 000● of the contactor with mounted auxiliary switch blocktyp. 10 000 000 Reference code according to IEC 81346-2:2009 QRoHS directive (date) 10/01/2009Environmental conditionsinstallation altitude by altitude above sea level max. 2 000 m ambient temperature● during operation -25 ... +60 °C● during storage -55 ... +80 ° Crelative humidity min. 10 %relative humidity at 55 °C according to IEC 60068-2-30 max. 95 %

Read more less

SIEMENS LOGO! 12/24RCE 6ED10521MD080BA1 LOGO! 12/24RCE, logic module, display PS/I/O: 12/DC 24 V/relay, 8DI (4AI)/4DO, 400 block memory, Ethernet modularity and expandability, integrated Web Server, data log, customized web pages, standard microSD card for LOGO! Soft Comfort as of V8.3, previous projects executable, cloud connection in all LOGO! basic devices 8.3. DisplayWith display YesMounting typeMounting on 35 mm standard rail, width of 4 units dimensionSupply voltageRated value (DC)● 12 V DC Yes● 24 V DC YesPermitted range, lower limit (DC) 10.8 VAllowable range, upper limit (DC) 28.8 V TimeClock switches● Number 400; Max. 400, depending on function● Power reserve 480 hDigital inputsNumber of inputs 8; of which 4 can be used as analogue (0 ... 10 V)Digital outputsNumber of outputs 4; RelayShort circuit protection No; requires external protectionOutput current● for signal "1" permitted range for 0 ... 55 °C, max. 10 ARelay outputsContact breaking capacity— with inductive load, max. 3 A— with ohmic load, max. 10 AEMCRadio interference emission according to EN 55 011● Limit value class B, for use in residentialareasYes; Radio interference suppression according to EN 55011, limit value class BStandards, approvals, certificatesCE marking YesCSA approval YesUL approval YesApproval FM Yesdeveloped according to IEC 61131 Yesaccording to VDE 0631 YesMarine approval Yes

Read more less

SIEMENS SINAMICS G120C PN 11.0KW FILA  6SL32101KE226AF1 SIMATIC ET 200SP, PROFINET interface module IM 155-6PN Basic, max. 12 I/O modules, 2x built-in RJ45 sockets incl. server module General information:Product type designation IM 155-6 PN BAHardware version from FS04Firmware version ● FW update possible Yes Product function● I&M data Yes; I&M0 ... I&M3● Replacing a module during operation (Hot Swapping) Yes; Single Hot Swapping● Isochronous operation No Engineering with● STEP 7 TIA Portal configurable/integrated from version V13 SP1● STEP 7 configurable/integrated from version V5.5 SP4● PROFINET from GSD version/GSD revision GSDML V2.31 Configuration controlvia data set Yes Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) ) 28.8 VReverse polarity protection YesShort circuit protection Yes Mains and voltage interruption buffering● Mains/voltage interruption buffering time 5 ms Input currentCurrent consumption, max. 300 mA I²t 0.09 A²·s Power dissipationPower dissipation, typ. 1.8 W Address spaceAddress space per module● Address space per module, max. 32 bytes; resp. for input and output dataAddress space per station● Address space per station, max. 32 bytes Hardware configurationMounting frame● Max. of usable ET 200SP modules 12● Max. of usable ET 200AL modules 0 InterfacesNumber of PROFINET interfaces 1; 2 ports (switch)

Read more less

8WA7551 SIEMENS guida DIN CU 35mm, lunghezza 2m EN 50 022-35x 15 Tecnica di collegamento con morsetti combinabili per diverse applicazioni industriali e tecnica di installazione moderna di Siemens. Si può decidere indifferentemente se impiegare la tecnica di collegamento a vite, a molla, push-in oppure la tecnica di collegamento rapida: tutte le tecniche di collegamento sono liberamente combinabili tra di loro. Gli accessori per iscrizione e prova sono standardizzati e utilizzabili trasversalmente. Con i morsetti combinabili di Siemens si possono realizzare molte applicazioni in edifici industriali, funzionali e residenziali. È così disponibile la tecnica di collegamento adatta per ogni esigenza! I morsetti combinabili Siemens si contraddistinguono soprattutto per le seguenti caratteristiche: 1. Contatto sicuro e durevole. 2. Collegamenti elettrici facili da sciogliere come cavi e conduttori. 3. Realizzazione di una molteplicità di applicazioni. 4. Tecnica di montaggio e tecnica di collegamento comode e semplici. 5. Ampia gamma di accessori standardizzati. 6. Sicurezza affidabile durante l'installazione grazie alla protezione contro i contatti accidentali come standard di serie. 7. Tecnica ottimale per la vostra sicurezza - solo da Siemens.

Read more less

8GK99200KK11 SIEMENS guida DIN per apparecchi d'installazione, B=600

Read more less

7KM99000YA000AA0 SIEMENS adattatore per montaggio su guida DIN, display orientato verso la guida DIN, per 7KM PAC3100 / 3200 / 4200 TMP I dispositivi di misura 7KM PAC sono lo strumento ideale per il rilevamento di valori di energia. I dispositivi di misura 7KM PAC rilevano in modo preciso, riproducibile e affidabile i valori di energia per alimentazione, partenze elettriche o singoli utilizzatori. Essi forniscono non solo informazioni complete sulla vostra installazione elettrica e sulla distribuzione dell'energia ma anche valori di misura importanti per la valutazione dello stato dell'impianto e della qualità della rete. Per l'ulteriore elaborazione dei dati di misura i dispositivi sono facilmente integrabili, grazie alle loro molteplici possibilità di comunicazione, in sistemi sovraordinati di automazione e di gestione dell'energia. I dispositivi di misura Siemens 7KM PAC dispongono di una gamma di accessori coordinati: 1. Adattatore per montaggio su guida DIN, display orientato in avanti, per PAC3100 / 3200 / 4200. 2. Adattatore per montaggio su guida DIN, display orientato verso la guida DIN, per PAC3100 / 3200 / 4200. 3. Supporto compatto, per il montaggio diretto di 7KM3133-0BA00-3AA0, 7KM2111-1BA00-3AA0, 7KM2112-0BA00-3AA0, 7KM4211-1BA00-3AA0, 7KM4212-0BA00-3AA0. 4. Ricambio per PAC3100 / 3200 / 4200. www.siemens.com/powermonitoring. Siemens offre una gamma completa di apparecchi di protezione, manovra, misura e controllo, quadri di distribuzione nonché interruttori e prese di corrente per una infrastruttura elettrica sicura ed efficiente in edifici residenziali e industriali.

Read more less

7KM99000XA000AA0 SIEMENS adattatore per montaggio su guida DIN, display orientato in avanti, per 7KM PAC3100 / 3200 / 4200 TMP2 I dispositivi di misura 7KM PAC sono lo strumento ideale per il rilevamento di valori di energia. I dispositivi di misura 7KM PAC rilevano in modo preciso, riproducibile e affidabile i valori di energia per alimentazione, partenze elettriche o singoli utilizzatori. Essi forniscono non solo informazioni complete sulla vostra installazione elettrica e sulla distribuzione dell'energia ma anche valori di misura importanti per la valutazione dello stato dell'impianto e della qualità della rete. Per l'ulteriore elaborazione dei dati di misura i dispositivi sono facilmente integrabili, grazie alle loro molteplici possibilità di comunicazione, in sistemi sovraordinati di automazione e di gestione dell'energia. I dispositivi di misura Siemens 7KM PAC dispongono di una gamma di accessori coordinati: 1. Adattatore per montaggio su guida DIN, display orientato in avanti, per PAC3100 / 3200 / 4200. 2. Adattatore permontaggio su guida DIN, display orientato verso la guida DIN, per PAC3100 / 3200 / 4200. 3. Supporto compatto, per il montaggio diretto di 7KM3133-0BA00-3AA0, 7KM2111-1BA00-3AA0, 7KM2112-0BA00-3AA0, 7KM4211-1BA00-3AA0, 7KM4212-0BA00-3AA0. 4. Ricambio perPAC3100 / 3200 / 4200. www.siemens.com/powermonitoring. Siemens offre una gamma completa di apparecchi di protezione, manovra, misura e controllo, quadri di distribuzione nonché interruttori e prese di corrente per una infrastruttura elettrica sicura ed efficiente in edifici residenziali e industriali.

Read more less

7KM99000SA000AA0 SIEMENS parte di ricambio, per 7KM PAC3100 / 3200 / 4200

Read more less

7KM99000GA000AA0 SIEMENS supporto compatto, per 7KM3133- 0BA00-3AA0, 7KM2111-1BA00- 3AA0, 7KM2112-0BA00-3AA0, 7KM4211-1BA00-3AA0, 7KM4212- 0BA00-3AA0 I dispositivi di misura 7KM PAC sono lo strumento ideale per il rilevamento di valori di energia. I dispositivi di misura 7KM PACrilevano in modo preciso, riproducibile e affidabile i valori di energia per alimentazione, partenze elettriche o singoli utilizzatori. Essi forniscono non solo informazioni complete sulla vostra installazione elettrica e sulla distribuzione dell'energiama anche valori di misura importanti per la valutazione dello stato dell'impianto e della qualità della rete. Per l'ulteriore elaborazione dei dati di misura i dispositivi sono facilmente integrabili, grazie alle loro molteplici possibilità di comunicazione, in sistemi sovraordinati di automazione e di gestione dell'energia. I dispositivi di misura Siemens 7KM PAC dispongono di una gamma di accessori coordinati: 1. Adattatore per montaggio su guida DIN, display orientato in avanti, per PAC3100 / 3200 / 4200. 2. Adattatore per montaggio su guida DIN, display orientato verso la guida DIN, per PAC3100 / 3200 / 4200. 3. Supporto compatto, per il montaggio diretto di 7KM3133-0BA00-3AA0, 7KM2111-1BA00-3AA0, 7KM2112-0BA00-3AA0, 7KM4211-1BA00-3AA0, 7KM4212-0BA00-3AA0. 4. Ricambio per PAC3100 / 3200 / 4200. www.siemens.com/powermonitoring. Siemens offre una gamma completa di apparecchi di protezione, manovra, misura e controllo, quadri di distribuzione nonché interruttori e prese di corrente per una infrastruttura elettrica sicura ed efficiente in edifici residenziali e industriali.

Read more less

6ES75901AJ300AA0 SIEMENS SIMATIC S7-1500, guida profilata 830 mm (ca. 32,7 pollici); incl. vite di messa a terra, guida profilata integrata per il montaggio della minuteria ad es. morsetti, interruttore automatico e rel?? Le guide profilate SIMATIC sono disponibili in diverse lunghezze per l'installazione diretta nel quadro elettrico o per il taglio alla lunghezza desiderata. Per il corretto collegamento di messa a terra vanno impiegati opportuni morsetti di messa a terra.. 6ES7590-1AJ30-0AA0

Read more less

6ES73901BC000AA0 SIEMENS SIMATIC S7-300, guida profilata, lunghezza: 2000 mm Le guide profilate SIMATIC sono disponibili in diverse lunghezze per l'installazione diretta nel quadro elettrico o per il taglio alla lunghezza desiderata. Per il corretto collegamento di messa a terravanno impiegati opportuni morsetti di messa a terra.

Read more less

6ES73901AJ300AA0 SIEMENS SIMATIC S7-300, guida profilata, lunghezza: 830 mm Le guide profilate SIMATIC sono disponibili in diverse lunghezze per l'installazione diretta nel quadro elettrico o per il taglio alla lunghezza desiderata. Per il corretto collegamento di messa a terra vanno impiegati opportuni morsetti di messa a terra.

Read more less

6ES71951GG300XA0 SIEMENS SIMATIC DP, guida profilata per ET 200, lunghezza 620 mm, per alloggiamento di moduli di bus per funzione di estrazione e inserimento Le guide profilate SIMATIC sono disponibili in diverse lunghezze per l'installazione diretta nel quadro elettrico o per il taglio alla lunghezza desiderata. Per il corretto collegamento di messa a terra vanno impiegati opportuni morsetti di messa a terra.

Read more less

6ES71951GF300XA0 SIEMENS SIMATIC DP, guida profilata per ET 200, lunghezza 530 mm, per l'alloggiamento di moduli di bus per la funzione di estrazione e inserimento Le guide profilate SIMATIC sono disponibili in diverse lunghezze per l'installazione diretta nel quadro elettrico oper il taglio alla lunghezza desiderata. Per il corretto collegamento di messa a terra vanno impiegati opportuni morsetti di messa a terra.

Read more less