SIEMENS COUNTER 11KW,1L,1R,DC 24V,S0 VT 3RT20261BB40 Power contactor, AC-3e/AC-3, 25 A, 11 kW / 400 V, 3-pole, 24 V DC, auxiliary contacts: 1 NO + 1 NC, screw terminals, frame size : S0 General information: Product designation Power contactorproduct type designation 3RT2 General technical datacontactor size S0product expansion● function module for communication No● auxiliary switch block Yespower loss [W] at nominal current value● with AC in hot operating state 5.7 W● with AC in hot operating state per pole 1.9 W ● without the value of the typical load current. 5.9 W Insulation voltage● of the main circuit with pollution degree 3 valuenominal 690 V● of the auxiliary circuit with pollution degree 3 value rated 690 V Impulse withstand voltage● of the main circuit nominal value 6 kV● of the auxiliary circuit nominal value 6 kVmax. permissible for safe separation between coil andmain contacts according to EN 60947-1 400 V Shock resistance with rectangular wave shock● with DC 10g / 5 ms, 7.5g / 10 msshock resistance with wave shock sinusoidal● with DC 15g / 5 ms, 10g / 10 ms Mechanical lifespan (operating cycles)● of the contactor typ. 10 000 000● of the contactor with mounted auxiliary switch blocksuitable for the electronics typ. 5 000 000● of the contactor with mounted auxiliary switch blocktyp. 10 000 000 Reference code according to IEC 81346-2:2009 QRoHS Directive (date) 10/01/2009 Environmental conditionsinstallation altitude by altitude above sea level. max. 2 000 m Ambient temperature● during operation -25 ... +60 °C● during storage -55 ... +80 ° Crelative humidity min. 10 %relative humidity at 55 °C according to IEC 60068-2-30 max. 95 %

Read more less

SIEMENS Circuit breaker size S00 for motor protection 3RV20111AA10 Automatic circuit breaker size S00 for motor protection, CLASS 10 release A 1.1...1.6 A release N 21 A screw terminal standard operating power. General technical dataframe size of the circuit breaker S00frame size of the combinable contactor company specificS00, S0product extension auxiliary contacts Yespower dissipation [W] at rated current value● with AC in hot operating state 7.25 W● with AC in hot operating state per pole 2.4 Winsulation voltage with pollution degree 3 with ACrated value690 Vimpulse withstand voltage rated value 6 kVshock resistance according to IEC 60068-2-27 25g / 11 msmechanical lifespan (operating cycles)● of the main contacts typ. 100 000● of auxiliary contacts typ. 100 000electrical lifespan (switching cycles) typ. 100 000type of explosion protection according to the ATEXProduct Directive 2014/34/EUEx II (2) GDcertificate of suitability according to the ATEX Product Directive2014/34 /UEDMT 02 ATEX F 001reference code according to IEC 81346-2:2009 QRoHS Directive (date) 10/01/2009Environmental conditionsinstallation altitude for altitude above sea level max. 2 000 mambient temperature● during operation -20 ... +60 °C● during storage -50 ... +80 °C● during transport - 50 ... +80 °Crelative humidity during operation 10 ... 95 %Main electrical circuitnumber of poles per main circuit 3tripping value settable for current of thecurrent-dependent overload release 1.1 ... 1.6 Aoperating voltage● rated value 20 ... 690 V● with AC-3 rated value max. 690 V● with AC-3e rated value max. 690 Voperating frequency rated value 50 ... 60 Hz

Read more less

SIEMENS KIT TELEINVVT S00 3RA29132AA1 Wiring kit for electrical and mechanical screw connection incl. mechanical interlock for reversing starter size S00. Product brand SIRIUSProduct name Wiring kitProduct design S00 starter, screw terminals General technical datacontactor size S00RoHS directive (date) 10/01/2009number of poles 3 Mounting/ Fixing/ Dimensionstype of fixing screw fixingApprovals Certificates

Read more less

SIEMENS BASEUNIT TYPE A0, BU15-P16+A10+2B  6ES71936BP200BA0  SIMATIC ET 200SP, Basic unit BU15-P16+A10+2B, BU type A0, Push-in terminals, with 10 aux. terminals, bridged to the left, WxH: 15 mmx141 mm General information:Product type designation BU type A0Hardware version from FS06 Supply voltageRated value (DC) 24 VExternal protection of power cables Yes; DC 24 V / 10 A circuit breaker with tripping characteristic type B or C Current carrying capacityfor busbar P1 and busbar P2, max. 10 Afor AUX bus, max. 10 Afor process terminals, max. 2 A Hardware configurationFormation of potential groups● New potential group No● Potential group continued from left Yes Slot● Number of slots 1; Type A0 InsulationInsulation tested with DC 707 V (Type Test) Environmental conditionsAmbient temperature in operation● Horizontal mounting position, min. -30 °C● Horizontal mounting position, max. 60 °C● Vertical mounting position, min. -30 °C● Vertical mounting position, max. 50 °CAltitude during operation, reference to sea level● Installation altitude max. above sea level 5 000 m; Limitations for installation altitudes > 2 000 m, see manual AccessoriesColor coding labels● for process terminals CC00 ... CC09● for AUX terminals CC71 ... CC73● for additional terminals not availableconnection technology Clamps● Clamp type Push-in clamp● shield connection integrated into the system Yes; opt.● Connection section min. 0.14 mm²; AWG 26● Connection cross-section, max. 2.5mm²; AWG 14● Number of process terminals for the I/O module 16● Number of terminals for the AUX bus 10

Read more less

SIEMENS SIMATIC ET 200SP 6ES71376BD000BA0 SIMATIC ET 200SP, CM 4xIO-Link ST communication module Master IO‑Link V1.1 General informationProduct type designation CM 4xIO-Link STHardware version FS20Firmware version V2.2.2● FW update possible YesUsable BaseUnits BU type A0Color code for module-specific color coding label CC04Product function● I&M data Yes; I&M0 ... I&M3● Isochronous operation No; Only for PROFINET and configuration as version with FW V2.0 or V2.1Engineering with● STEP 7 TIA Portal configurable/integrated from versionFrom STEP 7 V15● STEP 7 configurable/integrated from version From STEP 7 V5.5● PROFIBUS from version GSD/GSD revision Each one GSD file from revision 3 and 5● PROFINET from version GSD/GSD revision GSDML V2.3Supply voltageRated value (DC) 24 VPermitted range, lower limit (DC) 19.2 V; 20.5 V when using IO-Link, since the supply voltage for IO-Link devices on the master must be at least 20 V.Permitted range, upper limit (DC) 28.8 VRequired voltage supply according to NEC class 2 NoInput currentCurrent consumption, max. 45mA; no loadTransducer power supplyNumber of outputs 4Output current● Rated value 700 mA; per channel24 V transducer supply● Short-circuit protection Yes● Output current, max. 2.1 APower dissipationPower dissipation, typ. 1 WHardware configurationAutomatic coding Yes● H-type electronic coding element YesDigital outputsCable length● without shielding, max. 20m; also applies to shielded cables

Read more less

SIEMENS SITOP PSU100S 24 V/10 A 6EP13342BA20 SITOP PSU100S 24 V/10 A stabilized power supply input: AC 120/230 V output: DC 24 V/10 A. General information: Entrance: Form of the electrical network Single-phase ACsupply voltage at AC● initial value Automatic range switchingsupply voltage● 1 at AC rated value 120 V ● 2 with AC 230 V rated valueinput voltage● 1 with AC 85 ... 132 V● 2 with AC 170 ... 264 Vinput design wide input range Nooverloadability due to overvoltage 2.3 x Ue nom, 1.3 msbackup operating condition due to lack ofmains voltage With Ue = 93/187 Vbackup time with rated value of theoutput current in case of mains voltage failure min. 20 msbackup operating condition due to lack of mains voltage             With Ue = 93/187 Vmains frequency● 1 nominal value 50 Hz● 2 value rated 60 Hzmains frequency 47 ... 63 Hzinput current● at rated input voltage 120 V 4.49 A● at rated input voltage 230 V 1.91 Acurrent limitation of the inrush current at 25 °C max. 60 AI2t value max. 5.6 A²·sexecution of protection T 6.3 A/250 V (not accessible)● of the mains cable Recommended circuit breaker: apart. from 10 A characteristic COutputshape of the voltage curve at the output regulated potential-free DC voltageoutput voltage with DC rated value 24 V output voltage ● at output 1 with DC nominal value 24 Vrelative overall voltage tolerance 3 %relative control accuracy of the output voltage● with slow fluctuation of the input voltage 0.1 % ● with slow ohmic load fluctuation 1 %residual ripple● max. 150 mV● typ. 20 mVpeak voltage● max. 240 mV● typ. 160 mVoutput voltage adjustable 22.8 ... 28 Vproduct function output voltage adjustable Yestype of setting of the output voltage Via potentiometerdisplay execution for normal operation LED green for 24 V O.K.type of signal at the output Relay contact (open contact, loadability DC 60 V/0.3 A) for "24 V O.K."progression of the output voltage at switch-on Overshoot of Ua max. intervention delay 0.3 svoltage rise time of the output voltage● typ. 20 msoutput current● rated value 10 A● rated range 0 ... 12 A; 12 A ... +45 °C; +60 ... +70 °C: Derating 3%/Kexported active power typ. 288 Wshort-time overload current● in case of short circuit during normal starting typ. 32 A● in the event of a short circuit during typical operation. 32 Aduration of overloadability due to overcurrent● in case of short circuit during start-up 1 000 ms● in case of short circuit during operation 1 000 msproduct characteristic● parallel connection of equipment Yesnumber of equipment connected in parallel for power increase2Efficiencyefficiency [%] 90 %power dissipated [W]● with nominal value of the output voltage with nominal valueof the output current typ. 25 WRegulationrelative regulation accuracy of the output voltage withrapid input voltage fluctuation of +/- 15 % typ.0.3 %relative regulation accuracy of the output voltage withstep variation of the ohmic load 10/90/10 % typ. 3 %

Read more less

SIEMENS SITOP PSE200U 10 A 6EP19612BA41 SITOP PSE200U 10 A 4-channel selective module input: DC 24 V/40 A output: DC 24 V/4x 10 A threshold value settable 3 ... 10 A with status message for each output * Ex approval no longer available* Inputshape of the electrical network Regulated DC voltagesupply voltage with DC nominal value 24 Vinput voltage with DC 22 ... 30 Voverloadability for overvoltage 35 Vinput current at nominal value of theinput voltage 24 V nominal value 40 A Outputshape of the voltage curve at the output Regulated DC voltageformula for output voltage Ue - approx. 0.2 Vrelative overall tolerance of the known voltage Corresponding to the input supply voltagenumber of outputs 4output current up to 60 °C for each output nominal value 10 Avalue of trip settable for release current ofcurrent-dependent overload 3 ... 10 Atype of setting of the trip value Via potentiometerproduct characteristic parallel connection of outputs Notype of insertion of the outputs Simultaneous activation of all the outputs upon reaching the value ofsupply voltage regime > 20 V, delay time of 24 ms, 100ms or settable via DIP switch for sequential insertion "optimized for the load " Efficiencyefficiency [%] 99 %power dissipation [W] at nominal value of theoutput voltage at nominal value of the output current typ. 10 WDisconnection characteristic per outputswitching characteristic● of the overcurrent disconnection IA = 1.0 ... 1, 5 x set value, switches off after approx. 5 s● of the current limitation IA = 1.5 x set value, shutdown after typ. 100 ms● of immediate switch-off IA > set value and Ue residual current at switch-off typ. 1 mAReset execution via button for each outputRemote RESET function 24 V non-floating input (signal level "high" at > 15 V)Protection and monitoringcarrying out protection on the 15 A input for each output (not accessible)running the display for normal operation Tricolor LED for each output: green LED for "Output on", yellow LED for " Output switched off manually", red LED for "Output switched off due to overcurrent"design of switching contact for signaling functionStatus signal output (pulse/pause signal can be analyzed via functional moduleSIMATIC)Safetypotential separation between input and output at No

Read more less

SIEMENS SITOP PSU200M 10A  6EP13343BA10 SITOP PSU200M 10 A stabilized power supply input: AC 120/230 ... 500 V output: DC 24 V/10 A   *Ex approval no longer available* EntranceSingle-phase and two-phase AC electrical network shapesupply voltage with AC● Initial value Setting by switch on the devicesupply voltage● 1 with AC 120 ... 230 V● 2 with AC 230 ... 500 Vinput voltage● 1 with AC 85 ... 264 V● 2 with AC 176 ... 550 VInput execution wide-range input YesOvervoltage overload capability 1300 Vpeak, 1.3 msoperating condition of the buffer due to lack ofmains voltageWith Ue = 120/230 V, typ. 150 ms with Ue = 400 Vbuffering time with nominal current valueoutput in case of mains voltage failure min.25 msoperating condition of the buffer due to lack ofmains voltageWith Ue = 120/230 V, typ. 150 ms with Ue = 400 Vnetwork frequency● 1 nominal value 50 Hz● 2 nominal value 60 HzMains frequency 47 ... 63 Hzinput current● with input voltage rating 120V 4.4A● with input voltage rating 230 V 2.4 A● with input voltage rating 500V 1.1Acurrent limitation of the inrush current at 25 °C max. 35 AI2t value max. 4 A² sexecution of protection T 6.3 A (not accessible)● of the network cable Circuit breaker recommended for single-phase operation: apart.from 6 A (10 A) characteristic C (B); required for two-phase operation:magnetothermal switch with bipolar coupling or switchautomatic 3RV2011-1EA10 (set to 3.8 A) or 3RV2711-1ED10 (UL489) with 230 V, 3RV2011-1DA10 (setting to 3 A) or 3RV2711-1DD10(UL 489) with 400/500 VExitshape of the voltage curve at the output of the regulated DC voltage at free potentialOutput voltage with DC nominal value 24 Voutput voltage● on output 1 with DC nominal value 24 Voverall relative voltage tolerance 3 %relative regulation accuracy of the output voltage● with slow fluctuation of input voltage 0.1%

Read more less

SIEMENS SINAMICS G120C 6SL32101KE175AF1 SINAMICS G120C rated power: 3.0kW with 150% overload for 3 sec. 3AC380-480V+10/-20% 47-63Hz integrated class A filter I/O interface: 6DI, 2DO, 1AI, 1AO Integrated Safe-Torque-Off integrated fieldbus: PROFINET PN protection degree IP20/UL Open type size : FSA 196x 73x 225.4 (HxWxD) 24V external.

Read more less

SIEMENS SITOP PSU200M 5 A 6EP13333BA10 SITOP PSU200M 5 A stabilized power supply input: AC 120/230 ... 500 V output: DC 24 V/5 A *Ex approval no longer available* Inputform of the electrical network Single-phase and two-phase ACsupply voltage with AC● initial value Setting via switch on the equipment; start from EU >90/180 V supply voltage● 1 at AC 120 ... 230 V● 2 at AC 230 ... 500 V input voltage● 1 at AC 85 ... 264 V● 2 at AC 176 ... 550 V input implementation wide-range input Yesoverload capability for overvoltage 1300 Vpeak, 1.3 ms backup operating condition due to lack of mains voltageWith Ue = 120/230 V, typ. 150 ms with Ue = 400 Vbuffering time with nominal value of the output currentin case of mains voltage failure min. 25 ms backup operating condition due to lack ofmains voltageWith Ue = 120/230 V, typ. 150 ms with Ue = 400 V mains frequency● 1 nominal value 50 Hz● 2 nominal value 60 Hzmains frequency 47 ... 63 Hz input current● at rated input voltage 120 V 2.2 A● at rated input voltage 230 V 1, 2 A● at nominal value of the input voltage 500 V 0.61 Acurrent limitation of the inrush current at 25 °C max. 35 AI2t value max. 1.7 A²·s execution of protection T 3.15 A (not accessible)● of the mains cable Recommended thermomagnetic switch for single-phase operation: separately from 6 A (10 A) characteristic C (B); required for two-phase operation:thermic circuit breaker with bipolar coupling or automaticbreaker 3RV2011-1EA10 (setting to 3.8 A) or 3RV2711-1ED10 (UL489) with 230 V, 3RV2011-1DA10 (setting on 3 A) or 3RV2711-1DD10(UL 489) with 400/500 VOutputshape of the voltage curve at the output regulated potential-free direct voltage Output voltage with DC rated value 24 V output voltage● at output 1 with DC nominal value 24 Vrelative overall voltage tolerance 3 %relative control accuracy of output voltage  

Read more less

SIEMENS SIMATIC ET 200SP 6ES71556AR000AN0 SIMATIC ET 200SP, PROFINET interface module IM 155-6PN Basic, max. 12 I/O modules, 2x built-in RJ45 sockets incl. server module. General information: Product type designation IM 155-6 PN BAHardware version from FS04Firmware version● FW update possible Yes Product function● I&M data Yes; I&M0 ... I&M3● Replacing a module during operation (Hot Swapping)Yes; Single Hot Swapping● Isochronous operation No Engineering with● STEP 7 TIA Portal configurable/integrated fromversion V13 SP1● STEP 7 configurable/integrated from version V5. 5 SP4● PROFINET from GSD version/GSD revision GSDML V2.31 Configuration control via data set Yes Supply voltageRated value (DC) 24 VPermissible range, lower limit (DC) 19.2 VPermissible range, limit upper (DC) 28.8 VReverse polarity protection YesShort circuit protection Yes Mains and voltage interruption buffering● Mains/voltage interruption buffering time 5 ms Input currentCurrent consumption, max. 300 m I²t 0.09 A²·s Power dissipationPower dissipation, typ. 1.8 W Address spaceAddress space per module● Address space per module, max. 32 bytes; resp. for input and output dataAddress space per station● Address space per station, max. 32 bytes Hardware configurationMounting frame● Max. of usable ET 200SP modules 12● Max. number of usable ET 200AL modules 0

Read more less

SIEMENS SIMATIC S7-1200 6ES72266BA320XB0 SIMATIC S7-1200, digital input module SM 1226, F-DI 16X DC 24V, PROFIsafe, width 70mm, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General information:Product type designation SM 1226, F-DI 16x24 VDC Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) ) 28.8 VVoltage supply required according to NEC class 2 No Input currentfrom backplane bus DC 5 V, max. 155mA; Current consumption (SM bus, DC 5 V): 155 mADigital inputs● from load voltage L+ (without load), max. 130mA; 130 mA + 6 mA / input used + any current usedVsensor1/Vsensor2 Power dissipationPower dissipation, typ. 7 W Digital inputsNumber of inputs 16; 16 (1oo1) or 8 (1oo2); Note: You can individually assign each pair of "a.x" and "b.x" inputs as a single 1oo2 channel or as 2 separate 1oo1channels Number of inputs that can be managed simultaneouslyHorizontal mounting position— up to 50 °C, max. 16; 16 inputs, with horizontal installation at 55 °CVertical mounting position— up to 40 °C, max. 16; 16 inputs, with vertical installation at 45 °C Input voltage● for signal "0" DC -30 V ... DC +5 V● for signal "1" DC 15 V .. DC 30 V Input current● for signal "0", max. (permissible quiescent current) 0.5 mA● for signal "1", typ. 5 mA Input delay (with nominal value of the input voltage)for standard inputs— parameterizable Yes; 0.8 / 1.6 / 3.2 / 6.4 / 12.8 ms Cable length● with shielding, max. 200m; Unshielded with input filter time of 1.6 ms to 12.6 ms (with an input delay of 0.8 ms, shielded cables must be used for digital inputs and sensor power)● without shielding, max. 200m; Shielded with input filter time 0.8 ms to 12.6 ms (with an input delay of 0.8 ms, shielded cables must be used for digital inputs and sensor power) Alarms/diagnostics/status informationDiagnostic display LED● for input status Yes

Read more less

SIEMENS SIMATIC S7-1200, CPU 1212C  6ES72121AE400XB0 SIMATIC S7-1200, CPU 1212C, compact CPU, DC/DC/DC, onboard I/O: 8 DI, DC 24 V; 6 DO DC 24V; 2 AI 0...10V DC, power supply: DC DC 20.4...28.8V, program memory / data memory 100 KB General informationProduct type designation CPU 1212C DC/DC/DCFirmware version V4.6 Engineering with● Programming package from STEP 7 V18 Supply voltageRated value (DC)● DC 24 V YesPermissible range, lower limit (DC) 20.4 VPermissible range, upper limit (DC) 28.8 VReverse polarity protection YesLoad voltage L+● Rated value (DC) 24 V● Permissible range, lower limit ( DC) 20.4 V● Allowable range, upper limit (DC) 28.8 V Input currentCurrent consumption (nominal value) 400 mA; CPU onlyCurrent consumption, max. 1 200 mA; CPU with all expansion modulesInrush current, max. 12A; at DC 28.8 V I²t 0.5 A² s Output currentfor backplane bus (DC 5 V), max. 1 000 mA; max. DC 5 V for SM and CM Transducer power supply24 V transducer power supply● 24 V L+ minus 4 V DC min. Power dissipationPower dissipation, typ. 9 W MemoryWork memory● integrated 100 KBLoad memory● integrated 2 MB● insertable (SIMATIC Memory Card), max. with SIMATIC Memory Card Back-up collision● present Yes● maintenance-free Yes● without battery Yes CPU processing times for bit operations, typ. 0.08 μs; / instruction

Read more less

SIEMENS SIMATIC S7-1500F 6ES75173FP000AB0 SIMATIC S7-1500F, CPU 1517F-3 PN/DP, central processing unit with 3MByte work memory for the program and 8MByte for the data, 1st interface: PROFINET IRT with 2 Port Switch, 2nd interface: PROFINET RT, 3rd interface: PROFIBUS, 2 ns bit performance, SIMATIC Memory Card required. General information: Product type designation CPU 1517F-3PN/DPHardware version FS10Firmware version V3.0● FW update possible Yes Product function● I&M data Yes; I&M0 ... I&M3● Isochronous operation Yes; Decentrally and centrally; with min. OB 6 x cycle of 250 μs(decentrally) and 1 ms (centrally) Engineering with● STEP 7 TIA Portal configurable/integrated starting fromversion V18 (FW V3.0); from V13 Update 3 (FW V1.6) Configuration controlvia data set Yes DisplayScreen diagonal [cm] 6.1 cm Control elementsNumber of keys 6Operating mode selector 1 Supply voltageRated value (DC) 24 VPermissible range, lower limit (DC) 19.2 VPermissible range, limit upper (DC) 28.8 VReverse polarity protection Yes Mains and voltage failure buffering● Mains/voltage failure buffering time 5 ms● Repetition rate, min. 1/s Input currentCurrent consumption (nominal value) 1.55 AInrush current, max. 1.9A; Nominal value I²t 0.02 A²·s PowerPower supply in the backplane bus 12 WPower absorbed by the backplane bus (balanced) 30 W Power dissipationPower dissipation, typ. 24 W MemoryNumber of slots for SIMATIC Memory Card 1SIMATIC Memory Card required Yes

Read more less

SIEMENS SIMATIC S7-1200, CPU 1214C 6ES72141HG400XB0 SIMATIC S7-1200, CPU 1214C, compact CPU, DC/DC/relay, onboard I/O: 14 DI DC 24 V; 10 DO relay 2A; 2 AI 0...10V DC, power supply: DC DC 20.4...28.8V, program memory / data memory 150 KB General information: Product type designation CPU 1214C DC/DC/relayFirmware version V4.6 Engineering with● Programming package from STEP 7 V18 Supply voltageRated value (DC)● DC 24 V YesPermissible range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Load voltage L+● Rated value (DC) 24 V● Permissible range, lower limit (DC) 20.4 V● Allowable range, upper limit (DC) 28.8 V Input currentCurrent consumption (nominal value) 500 mA; CPU onlyCurrent consumption, max. 1 500 mA; CPU with all expansion modulesInrush current, max. 12A; at 28.8 V I²t 0.8 A²·s Output currentfor backplane bus (DC 5 V), max. 1 600 mA; max. DC 5 V for SM and CM Transducer power supply24 V transducer power supply● 24 V L+ minus 4 V DC min. Power dissipationPower dissipation, typ. 12 W MemoryWork memory● integrated 150 KBLoad memory● integrated 4 MB● insertable (SIMATIC Memory Card), max. with SIMATIC Memory Card Infill collision● present Yes● maintenance-free Yes● without battery Yes CPU processing timesfor bit operations, typ. 0.08 μs; / instruction

Read more less

SIEMENS DIGITAL OUTPUT SM 1226, F-DQ 4X 24VDC 6ES7226-6DA32-0XB0 SIMATIC S7-1200, digital output module SM 1226, F-DQ 4x DC 24V 2A, PROFIsafe, width 70mm, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508) . General information:Product type designation SM 1226 F-DQ 4 x 24 VDC Supply voltageAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VVoltage supply required according to NEC class 2 No Input currentfrom backplane bus DC 5 V, max. 125 mA Digital outputs● from load voltage L+, max. 170 mA Power dissipationPower dissipation, typ. 8 W Digital outputsNumber of outputs 4● in groups of 1Short circuit protection Yes Interrupting capacity of outputs● with ohmic load, max. 30 Hz● with lamp load, max. 10Hz Output voltage ● Nominal value (DC) 24 V Output current● for signal "1" rated value 2 A● for signal "1" permissible range, max. 10 mA ... 2.4 A● for signal "0" residual current, max. Switch on PNP: 0.5 mA, max.; NPN switch: 0.5 mA, max. Cable length● with shielding, max. 200 m● unshielded, max. 200 m Alarms/diagnostics/status informationDiagnostic display LED● for output status Yes Degree of protection and safety classIP protection degree IP20Standards, approvals, certificatesCE mark YescULus Yes FM approval YesMaximum safety class achievable in safety operation● Performance Level according to ISO 13849-1 Category 4, PL e● SIL according to IEC 61508 SIL 3

Read more less

SIEMENS SIMATIC S7-200 6ES72310HC220XA0 SIMATIC S7-200, analog input module EM 231, only for S7-22X CPU, 4 AI, 0-10V DC, 12 bit converter - Spare part. General information: Input currentfrom load voltage L+ (without load), max. 60 mAfrom backplane bus DC 5 V, max. 20 mA Power dissipationPower dissipation, typ. 2 W Analog inputsNumber of analog inputs 4; DifferenceAllowed input voltage for voltage input (destructivelimit), max. 30 VPermissible input current for current input (destructivelimit), max. 32 mA Input ranges● Voltage Yes● Current Yes● Thermocouple No● Thermoresistance No● Resistance No Input ranges (nominal values), voltages● 0 ... +5 V Yes— Input resistance (0 ... 5 V) 10 MΩ● 0 ... +10 V Yes— Input resistance (0 ... 10 V) 10 MΩ● -2.5 V ... +2, 5 V Yes— Input resistance (-2.5 V ... +2.5 V) 10 MΩ● -5 V ... +5 V Yes— Input resistance (-5 V ... +5 V) 10 MΩ Input ranges (nominal values), currents● 0 ... 20 mA Yes— Input resistance (0 ... 20 mA) 10 MΩ Thermocouple (TC)Temperature compensation— parameterizable No Cable length● with shielding, max. 100m; to the sensorAnalog value generation for the inputsIntegration and conversion time / resolution per channel● Resolution with overrange (bit incl. sign),max. 12 bit● Interference voltage suppression for frequencyinterference f1 in Hz 40 dB, DC ... 60 V for interference frequency 50 / 60 Hz● Conversion time (per channel) 250 μs6ES72310HC220XA0  

Read more less

SIEMENS COMMUNICATION PROCESSOR CP 1543-1 6GK75431AX000XE0 CP 1543-1 communications processor for connecting SIMATIC S7-1500 to Industrial Ethernet; TCP/IP, ISO, UDP, S7 communication, IP broadcast/multicast, security (VPN, firewall) diagnostics SNMPv1/v3, DHCP, FTP client/server, e-mail, IPv4/IPv6, IEEE 802.1X (radius), time synchronization via NTP, 1x RJ45 (10/100/1000 Mbit). General information: Transmission rate● on interface 1 10 ... 1000 Mbit/s Interfacesnumber of interfaces / according to Industrial Ethernet 1number of electrical connections● on interface 1 / according to Industrial Ethernet 1 carrying out the electrical connection● on interface 1 / according to Industrial Ethernet RJ45 port Supply voltage, absorbed current, dissipated powertype of voltage / of the DC supply voltagesupply voltage / 1 / from backplane bus 15 Vrelative symmetrical tolerance / with DC● with 15 V 3 % current consumption● from backplane bus / with DC / with 15 V / typ. 0.35 A power dissipation [W] 5.3 W Environmental conditions ambient temperature● for vertical installation / during operation 0 ... 40 °C● with horizontal installation / during operation 0 .. .60 °C● during storage -40 ... +70 °C● during transport -40 ... +70 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection degree IP20 Design, dimensions and weightsmodule format Single-width compact S7-1500 modulewidth 35 mmheight 142 mmdepth 129 mmnet weight 0.35 kgfastening type● mounting on S7-1500 profile rail Yes Product features, product functions, product components / genericnumber of units● per CPU / max. 8● note dependent on CPU type

Read more less

SIEMENS SIRIUS SAFETY RELAY STD RELAY 3NO,1NC 3SK1111-2AB30 SIRIUS safety device basic device Standard series relay enabling circuits 3 NO contacts plus relay signaling circuit 1 NC Us = AC/DC 24 V spring-type terminal (Push-in). General technical data:IP protection class of the enclosure IP20contact protection against electric shock finger protectionRated insulation voltage 300 V Room temperature● during storage -40 ... +80 °C● during operation -25 ... +60 °Catmospheric pressure according to SN 31205 90 ... 106 kParelative humidity during operation 10 ... 95 %Installation altitude for altitude above sea level max. 4 000 m; For derating see Product Communication 109792701Vibration resistance according to IEC 60068-2-6 5 ... 500 Hz: 0.75 mm10g/11ms shock resistanceRated impulse withstand voltage 4 000 VeMC interference emission IEC 60947-5-1, IEC 61000EMC related installation environment This product is suitable for class B environment and can be usedeven in a domestic environment.Overvoltage category 3pollution level 3reference code according to IEC 81346-2:2009 Fdissipated power [W] max. 2WNumber of inputs for 1 or 2 channel sensors 1cascade connection execution noneExecution of the safety technology wiring of the inputssingle channel and redundant product feature cross-circuit protection  Yes Safety Integrity Level (SIL)● according to IEC 62061 3● according to IEC 61508 3performance Level (pL)● according to ISO 13849-1 and category according to EN ISO 13849-1 4Safe failure rate (SFF) 99%PFHD for high demand rate according to EN 62061 1,7E-9 1/hPFDavg for low demand rate according to IEC 61508 1E-6T1 value for proof test interval or duration of use according to IEC 61508 20 a.

Read more less

SIEMENS SINAMICS G120C PN 0.75KW ROW 6SL3210-1KE12-3AF2 SINAMICS G120C Rated power: 0.75kW with 150% overload for 3 sec. 3AC380-480V+10/-20% 47-63Hz Integrated class A filter I/O interface: 6DI, 2DO, 1AI, 1AO Integrated safe-torque-off Integrated fieldbus: PROFINET PN Degree of protection IP20/UL Open Size type: FSAA 173x 73x 178 (HxWxD) External 24V.

Read more less

Siemens IE FC RJ45 plug 180 2x2 6GK1901-1BB10-2AA0  Industrial Ethernet FastConnect RJ45 Plug 180 2x 2, RJ45 connector (10/100 Mbit/s) with robust metal housing and FC connection technology, for IE FC 2x 2 cable; cable exit at 180°. Suitability for use       For connection to IE FC TP 2 x 2 cables, suitable for quick assembly with the FastConnect system Transmission speed transmission speed / with Industrial Ethernet                10 Mbit/s, 100 Mbit/s Interfaces number of electrical connections      for Industrial Ethernet FC TP cables 4 for network components or terminal equipment 1 Electrical connection execution  for Industrial Ethernet FC TP cables Integrated insulation piercing contacts for TP FC installation cables with 4 conductors AWG 22 for network components or terminal equipment RJ45 connector execution of electrical connection / FastConnect     Yes Mechanical data material / housing            metal number of reuses        10 interlock execution        other Construction shape, dimensions, and weights cable exit type            cable exit at 180° width             13.7 mm height  16 mm depth           55 mm net weight        35 g connectable cable diameter      6.5 ... 6.5 mm connectable conductor cross-section              0.33 mm² Environmental conditions ambient temperature during operation -40 ... +85 °C during storage -40 ... +85 °C during transport -40 ... +85 °C relative humidity at 25 °C / without condensation / during operation / max. 95 % degree of protection IP   IP20 Product features, product functions, integral parts of the product / generic product feature           with PoE properties Yes with PoE+ properties Yes silicone-free Yes Integral part of the product  pull relief Yes Standards, specifications, approvals Certificate of suitability   compliance with RoHS Yes UL approval Yes cULus approval Yes railway use according to EN 50155 No standards for structured cabling           C

Read more less

Siemens Industrial Ethernet FastConnect 6GK1901-0DB20-6AA0 Industrial Ethernet FastConnect M12 Plug PRO 2x2 M12 connector with robust metal housing and FC connection technology, with axial cable outlet (D-coded) 1 pack = 1 piece for SCALANCE X208 PRO and ET 200 PRO PN. Suitability for use: For connecting electrical cables to SCALANCE X208PRO, ET 200pro PN or ET 200eco PN, for quick assembly with the FastConnect system Transmission rate transmission rate / with Industrial Ethernet 10 Mbit/s, 100 Mbit/s Interfaces number of electrical connections for Industrial Ethernet FC TP 4 cables for network components or terminal equipment 1 Making the electrical connection for Industrial Ethernet FC TP cables Integrated insulation displacement contacts for 4-core TP FC installation cables AWG 22 for network components or terminal equipment M12 connector (D-coded) carrying out the electrical connection / FastConnect     Yes Mechanical data material / of the housing    metal number of reuses       10 execution of the interlock       Screw connection tightening torque / for M12 round connector / max. 0.6 N m coding connector / of the M12 round connector            D constructive form, dimensions and weights type of cable exit          180° cable exit width           19 mm height  19 mm depth         73 mm net weight        40 g connectable cable diameter      6.5 ... 6.5 mm connectable conductor cross-section           0.33 mm² environmental conditions Ambient temperature during operation -40 ... +85 °C during storage -40 ... +85 °C during transport -40 ... +85 °C Relative humidity at 25 °C / without condensation / during operation / max. 95 % Chemical resistance water resistant IP protection degree   IP65/67

Read more less

SIEMENS SITOP PSE200U SELECTIVITY MODULE 10A 6EP19612BA21  SITOP PSE200U 10 A 4-channel selective module input: DC 24 V/40 A output: DC 24 V/4x 10 A threshold value settable 3 ... 10 A with cumulative signaling contact. General information: Inputshape of the electrical network Regulated DC voltagesupply voltage with DC nominal value 24 Vinput voltage with DC 22 ... 30 Voverloadability for overvoltage 35 Vinput current at nominal value of theinput voltage 24 V nominal value 40 A Outputshape of the voltage curve at the output Regulated DC voltageformula for output voltage Ue - approx. 0.2 Vrelative overall tolerance of the known voltage Corresponding to the input supply voltagenumber of outputs 4output current up to 60 °C for each output nominal value 10 Avalue of trip settable for release current ofcurrent-dependent overload3 ... 10 Atype of trip value setting By potentiometerproduct characteristic parallel connection of outputs No type of activation of the outputs Simultaneous activation of all the outputs upon reaching the value ofsupply voltage regime > 20 V, delay time of 24 ms, 100ms or settable via DIP switch for sequential activation"load optimized" Efficiencyefficiency [%] 99 %power dissipation [W] at nominal value of theoutput voltage at nominal value of the output current typ.10 W Switch-off characteristic for each outputswitching characteristic● of the overcurrent switch-off IA = 1.0 ... 1.5 x set value, switch-off after approx. . 5 s● of the current limitation IA = 1.5 x set value, shutdown after typ. 100 ms● of immediate switch-off IA > set value and Ue residual current at switch-off typ. 1 mAReset execution via button for each outputRemote RESET function Non-floating 24 V input (signal level "high" at > 15 V) Protection and monitoringcarrying out protection on the 15 A input for each output (not accessible)running the display for normal operation Tricolor LED for each output: green LED for "Output switched on", yellow LEDfor "Output manually switched off", red LED for "Output switched off due to overcurrent" design of switching contact for signaling functionGroup signaling contact (changeover contact, loadability 0 ,1 A/DC 24 V).  

Read more less

SIEMENS SINAMICS G120C PN 1.5KW ROW  6SL3210-1KE14-3AF2 SINAMICS G120C Rated power: 1.5kW with 150% overload for 3 sec. 3AC380-480V+10/-20% 47-63Hz Integrated class A filter I/O interface: 6DI, 2DO, 1AI, 1AO Integrated Safe-Torque-Off Integrated fieldbus: PROFINET PN Degree of protection IP20/UL Open Size type: FSAA 173x 73x 178 (HxWxD) External 24V. General information: Max. output frequency:550 Hz Number of parallel hw interfaces:0 Number of analog inputs:1 Number of digital outputs:2 Maximum output voltage:480 V Number of analog outputs:1 Number of industrial ethernet hw interfaces:2 Number of serial hw tty interfaces:1 Mains voltage:380÷480 V Relative symmetrical mains frequency tolerance:5% Number of Profinet HW interfaces:2 Number of other hw interfaces:6 Depth:178mm Number of serial rs232 hw interfaces:1 Number of serial rs422 hw interfaces:0 Number of digital inputs:6 Height:173mm Max. power output with linear load at nominal output voltage:1.1 kW Number of USB HW interfaces:1 Length:73mm Nominal output current i2n:4.3 A Relative symmetrical mains voltage tolerance:-20% Max. power output with square load at nominal output voltage:1.5 kW Number of serial rs485 hw interfaces:

Read more less