ELECTRONIC DETECTION AND CONNECTION

Tese Italy XS7E1A1PAM8 The flat XS inductive proximity sensor (26 x 26 x 13 mm) Schneider Electric has a PBT body, a sensing distance of 10 mm, PNP output with NO function and an M8 connector. It has a power supply voltage of 12 to 24 Vdc. This general purpose inductive proximity sensor can be mounted directly to a surface, thanks to its 4 screw mounting points and is C-Tick, ECOLAB, CSA, UL certified.

Read more less

Omron E2BM18KS08WPB12MLITE, inductive, nickel-brass, short body, M18, shielded, 8mm, DC, 3-wire, PNP-NO, 2m cable

Read more less

Tese Italy XS118B3PAM12The cylindrical inductive sensor It has a sensing distance of 8 mm, PNP output with NO function and an M12 connector. It has a power supply voltage of 12 to 24 Vdc. This general purpose threaded inductive cylindrical proximity sensor is flush mountable and has a wider sensing range. It can be mounted directly on a surface or on a bracket, thanks to the external thread and double nuts and is E2, CSA, UL certified.

Read more less

Omron E2BM12KS04M1B1LITE, inductive, nickel-brass, short body, M12, shielded, 4mm, DC, 3-wire, PNP-NO, M12 plug-in connector

Read more less

Tese Italy XS112B3PAM12 The XS cylindrical inductive sensor (M12 thread) has a PPS sensing front and a nickel-plated brass housing. It has a sensing distance of 4 mm, PNP output with NO function and an M12 connector. It has a power supply voltage of 12 to 24 Vdc. This general purpose threaded inductive cylindrical proximity sensor is flush mountable and has a wider sensing range. It can be mounted directly on a surface or on a bracket, thanks to the external thread and double nuts and is E2, CSA, UL certified.

Read more less

Siemens 27 bit absolute value encoder 6FX20015FP24 27-bit absolute encoder 6FX2001-5FP24 with isochronous PROFIBUS DP operating voltage 10-30 V synchronous flange with cap and radial PG. Electrical data Operating voltage Up: DC 10 ... 30 V Current consumption, max: 100 ... 300 mA (2.5 W) Interface: PROFIBUS DP-V2 Clock input: Differential receiver according to EIA RS 485 standard Data output: Differential receiver according to RS 485 standard Short circuit resistance: yes Transmission rate: 12 Mbit/s Diagnostic LED: Yes (green/red) Number of nodes: 99 Connection type: Terminal block with address selector and bus terminating resistor in removable cover with cable gland (3 pieces), radial Cable diameter: 6.5 mm ... 9.0 mm, Removal of the cover possible without bus interruption Resolution: 27 bit, (8192 increments x 16384 rotations) Telegram: Second encoder profile PNO V4.1 Class1, Class 2, Class 3 standard telegram 81  

Read more less

Tese Italy Connector with 5 m cable. XZCP0666L5 Pre-wired XZ connectors - female elbow - M8 - 3 pins - 5m PUR cable.

Read more less

Tese Italy XS4P30MA230Sens. inductive XS4 M30, L 60mm, PPS, Sn 15mm, 24...240V AC/DC, 2m cable. product range: OsiSense XS - range name: general purpose - sensor type: inductive proximity sensor - application: - - sensor name: output: digital - wiring type: 2 wires - output circuit type: AC/DC - cable length: 2 m - switching capacity in mA: 5...200 mA DC, 5...300 mA AC. Benefits: Products available from all Schneider distributors, compliant with international standards and certifications, a complete expanded range.... Applications: - Assembly machines, robotics, machine tools, processing, packaging, material handling, transportation, etc. , Food and drink, etc....

Read more less

Tese Italy XS612B3DAL2The cylindrical inductive sensor It has a sensing distance of 4 mm, NO function and is pre-wired (2 m cable). It has a power supply voltage of 12 to 24 Vdc. This general purpose threaded inductive cylindrical proximity sensor is flush mountable and has a wider sensing range. It is mountable directly to a surface or bracket, thanks to the external thread and double nuts and is CSA UL certified.

Read more less

Omron E2BS08KS02MCB1 LITE, inductive, stainless steel, short body, M8, shielded, 2 mm, DC, 3 wires, PNP-NO, M8 plug-in connector (3 pins)

Read more less

Omron E2EX5Y12MOMS-238 Short AC inductives M18 shielded 5 mm NA cable 2 m

Read more less

Tese Italy XS118BHPAL2 PROXIMITY SENSOR SCHNEIDER PROX M18 PNP NO 1224V FLUSH SN 8MM CAV2M INDUCTIVE

Read more less

Tese Italy XS608B1NBL2 The Schneider Electric XS Cylindrical Inductive Sensor (M8 thread) has a PPS sensing face and a 303 stainless steel casing. It has a detection distance of 2.5 mm, NPN output with NC function and is pre-wired (2 m cable). It has a supply voltage of 12 to 48 Vdc. This general-purpose threaded inductive cylindrical proximity sensor is flush-mountable and has a wider detection range. It's mountable directly to a surface or bracket, thanks to its external thread and dual nuts, and is CSA UL certified.

Read more less

Tese Italy XS530B1MBL2 The XS cylindrical inductive sensor (M30 thread) has a PPS sensing face and a nickel-plated brass casing. It has a detection distance of 10 mm, NC function and is pre-wired (2 m cable). It has a supply voltage of 24 to 240 Vdc/dc. This general purpose threaded inductive cylindrical proximity sensor is flush mountable. It is mountable directly to a surface or bracket, thanks to the external thread and double nuts and is CCC, CSA, UL certified.

Read more less

Tese Italy XS2M30KP340Sens. inductive XS2 M30, L 62.6mm, Brass, Sn 15mm, 12...24V DC, 2m cable. product range: OsiSense XS - range name: general purpose - sensor type: inductive proximity sensor - application: - - sensor name: : metal - output signal type: digital - wiring type: 4 wires - output circuit type: DC - cable length: 2 m. Benefits: Products available from all Schneider distributors, compliant with international standards and certifications, a complete expanded range.... Applications: - Assembly machines, robotics, machine tools, processing, packaging, material handling, transportation, etc. , Food and drink, etc....

Read more less

Tese Italy XS612B4PAL2Inductive sensor

Read more less

Omron E2BM12KN08WPB12MLITE, inductive, nickel-brass, short body, M12, unshielded, 8mm, DC, 3-wire, PNP-NO, 2m cable

Read more less

Tese Italy XS1M12KP340DInductive sensor

Read more less

Tese Italy XS530B1PAM12The cylindrical inductive sensor It has a sensing distance of 10 mm, PNP output with NO function and an M12 connector. It has a power supply voltage of 12 to 24 Vdc. This general purpose threaded cylindrical inductive proximity sensor is flush mountable. It can be mounted directly on a surface or on a bracket, thanks to the external thread and double nuts and is CCC, CSA, UL certified.

Read more less

Omron E2EX4B1T12M1Inductive Proximity Sensor, Nickel-Brass, Short Body, M12, Shielded, 4mm, DC, 3-Wire, PNP NO, IO-Link COM3, M12 Connector

Read more less

Omron E2BM18LS08M1B1LITE, inductive, nickel-brass, long body, M18, shielded, 8 mm, DC, 3-wire, PNP-NO, M12 plug-in connector

Read more less

Tese Italy XS508B1PAM8The cylindrical inductive sensor It has a sensing distance of 1.5 mm, PNP output with NO function and an M8 connector. It has a power supply voltage of 12 to 24 Vdc. This general purpose threaded cylindrical inductive proximity sensor is flush mountable. It can be mounted directly on a surface or on a bracket, thanks to the external thread and double nuts and is CCC, CSA, UL certified.

Read more less

Omron E2EX4B1T122MInductive Proximity Sensor, Nickel-Brass, Short Body, M12, Shielded, 4mm, DC, 3-Wire, PNP NO, IO-Link COM3, 2m Prewired Cable

Read more less

Tese Italy XS618B1NAL2The cylindrical inductive sensor It has a sensing distance of 8mm, NPN output with NO function and is pre-wired (2m cable). It has a power supply voltage of 12 to 48 Vdc. This general purpose threaded inductive cylindrical proximity sensor is flush mountable and has a wider sensing range. It can be mounted directly on a surface or on a bracket, thanks to the external thread and double nuts and is CSA UL certified.

Read more less