SIEMENS SIMATIC S7-300 6ES73211BL000AA0 Digital input module SM 321, electrically isolated 32DE, 24V DC, 1 x 40-pole. Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 20.4 VAllowable range, upper limit (DC): 28.8 V Input current from backplane bus DC 5 V, max.: 15mA Power dissipated Power dissipation, typ.: 6.5 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES7193-6BP20-0DA0 SIMATIC ET 200SP, Basic unit BU15-P16+A10+2D, BU type A0, push-in clamps, with 10 out clamps. , new load group, LaxA: 15 mmx141 mm. General information Product type name BU type A0Hardware version from FS07 Supply voltage Nominal value (DC) 24 VExternal protection of the power cables Yes; DC 24 V/ 10 A magnetic circuit breaker with release feature type B or C Current flow rate for bar P1 and bar P2, max. 10 Afor AUX bar, max. 10 Afor process clamps, max. 2 A Hardware configuration Formation of potential groupsNew potential group YesPotential group continued from left No SlotNumber of slots 1; Type A0 Separation of potential Among potential groups Yes Isolation Insulation tested with DC 707 V (Type Test)  

Read more less

SIEMENS SIMATIC ET 200SP 6ES7-193-6BP00-0BA0 Basic unit BU15-P16+A0+2B, BU type A0, Push-in terminals, without aux. terminals, bridged to the left, WxH: 15x 117 mm. General information Product type designation: BU type A0Version Hardware: from FS06 Supply voltage Rated value (DC) 24 VExternal protection of power cables Yes; DC 24 V / 10 A thermal magnetic switch with tripping characteristic type B or C Main filter● integrated No Current range for busbar P1 and busbar P2, max. 10 Afor process terminals, max. 2 A

Read more less

SIEMENS SIMATIC ET 200SP 6ES71936AR000AA0 BA 2xRJ45 bus adapter, 2 RJ45 sockets General information Product type designation: BA 2 x RJ45   Interfaces Number of PROFINET interfaces: 1Supports protocol for PROFINET IO● Number of RJ45 ports 2Cable length — Copper conductors 100 m  

Read more less

SIEMENS SIMATIC DP 6ES7151-3BA23-0AB0 IM 151-3 PN HF interface module for ET 200S Transmission speed 100 Mbit/s max. 63 peripheral modules Connectable width up to 2m; 2x bus connections via RJ45 incl. closing module. General informationProduct type designation: IM 151-3 PN HF Supply voltage Mains/voltage interruption buffer time: 20 msInput current from supply voltage 1L+, max.: 200 mA Power dissipated Power dissipation, typ.: 3.3 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES7137-6AA01-0BA0 CM PTP communication module for RS-422, RS-485 and RS-232 serial link, Freeport, 3964 (R), USS, MODBUS RTU master, slave, max. 250 kbit/s, suitable for BU type A0, quantity per pack: 1 piece SIMATIC ET 200SP is a scalable and highly flexible distributed I/O system. Thanks to its small overall dimensions it is particularly suitable for installation in small distribution boxes at machine level. The modules can be plugged directly into an ET 200SP CPU or connected via PROFINET or PROFIBUS to a central controller. SIMATIC ET 200SP can be expanded with up to 64 I/O modules, which can be inserted in any combination. The system offers a very wide range of units. Many modules are also available with different performance levels, which greatly improves scalability regarding functionality and price. In addition to modules with standard functionality (ST), modules with an extended set of functions and diagnostics (HF High Feature / HS High Speed) are also available. For price-sensitive applications, basic functionality (BA) modules are available. The advantage of the ET 200SP system is its ease of use, e.g. thanks to the free choice of connection technology to PROFINET via the BusAdapter, tool-free cabling with push-in technology, improved accessibility of the cabling with the new arrangement of the spring openers next to the respective cable openings and the specific diagnostic functions of channel. The possibility of replacing modules and terminal boxes during operation, the so-called "Hot Swapping", ensures the availability and productivity of the machine. The communication modules expand the communication capabilities of the ET 200SP with additional functions or additional interfaces, such as PtP, IO-Link or AS-i. General Information Product type designation: CM PtPFirmware update possible: YesUsable BaseUnits: BU type A0 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VProtection from polarity inversion: Yes Input Current Current consumption (nominal value): 31 mACurrent consumption, max.: 35 mA Dissipated Power Power dissipation, typ. 0.7 W

Read more less

SIEMENS SIMATIC ET 200SP, TM count 1x 24V counting unit, 1 channel for 24 V incremental transducer or pulse generator, 3 DI, 2 DQ, suitable for BU type A0 6ES7138-6AA01-0BA0 General information Product type designation: TM Count 1x24VFirmware version V2.0FW update possible: YesUsable BaseUnits: BU type A0Color code for coding plate a color specification ofmodule: CC00 Supply voltage Rated value (DC): 24 VLoad voltage L+Rated value (DC): 24 VPermitted range, lower limit (DC): 19.2 VPermitted range , upper limit (DC): 28.8 VReverse polarity protection: Yes Power dissipated Power dissipation, typ. 1 W

Read more less

SIEMENS SIMATIC DP (DC 24 V - 21 MA) 6ES7-136-6BA00-0CA0 Electronics module for ET 200SP, F-DI 8x 24VDC HF, 15mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General information Product type designation F-DI 8x24VDC HFUsable BaseUnits BU type A0 Product function● I&M data Yes; I&M0 ... I&M3 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection YesVoltage supply required according to NEC class 2 No Input current Current consumption (nominal value) 75 mA; without loadCurrent consumption, max. 21 mA; from the backplane bus Power Power draw from the backplane bus 70 mW Power dissipated Power dissipation, typ. 4 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES7134-6GF00-0AA1 Analog input module, AI 8XI 2-/4-Wire Basic, suitable for BU type A0, A1, Color code CC01, Diagnostic module, 16 bit. General information Product type designation AI 8xI 2-/4-wire BAHardware version from FS04Firmware version● FW update possible YesUsable BaseUnits BU type A0, A1Color code for specific color coding plate of module CC01 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Input current Current consumption, max. 25mA; without transducer power supply Power dissipated Power dissipation, typ. 0.7W; without transducer power supply voltage

Read more less

SIEMENS SIMATIC ET 200SP   (DC 24 V - 35 mA without load) 6ES71326BF010BA0 Digital output module, DQ 8x 24V DC/0.5A Standard, Source Output (PNP, P-switching) Packaging unit: 1 piece suitable for BU type A0, Color code CC02, substitute value output , Diagnostics module for: Short circuit to L+ and M, wire break, supply voltage. General information:Product type designation: DQ 8x24VDC/0.5A STHardware version: From FS02Firmware version: V0.0Possible FW update: NoUsable BaseUnits: BU type A0Color code for module-specific color coding label: CC02 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YES Input current Current consumption (nominal value): 35 mA; without load Power dissipated Power dissipation, typ.: 1 W

Read more less

SIEMENS SIMATIC DP 6ES7-136-6DC00-0CA0 SIMATIC DP, electronics module ET 200SP, F-DQ 8X24VDC/0.5A PP, width 15mm, up to PL E (ISO 13849) up to SIL 3 (IEC 61508) With the SIMATIC ET 200SP, Siemens offers a distributed, multifunctional I/O system that can be easily put into operation thanks to its space-saving design. It is approved for IP20 protection and designed for installation in a compact distribution box. The system ensures maximum flexibility, allowing modules to be replaced quickly and easily at any time thanks to Multi Hot Swapping. Furthermore, the SIMATIC ET 200SP offers you a wide range of communication channels, both diverse and fast. Thanks to the integration of the IM155-6MF MultiFieldbus interface module, you can always react flexibly and use the optimal protocol for your application, as this function supports different Ethernet protocols. Assembly and service are simplified by a uniform identification system, based on reference identification plates and color-coded pin assignment. Siemens ensures you future-proof systems with the integration of innovative and at the same time long-lasting automation products, in fact as industry experts you are already investing today in the technologies of tomorrow and thus redefining market standards. The continuous availability of data, the flexibility of the application cases and the versatile integration options ensure the excellent performance of the ET 200 products. The scalable and cost-optimized configuration of an ET 200SP station is ensured by the wide range of I/O modules. In addition to digital and analog input and output modules, fail-safe variants are also available for applications up to SIL 3 / PLe. This also applies to integrated motor starters, which are suitable for motors up to 5.5 kW. Energy meters for measuring and analyzing energy consumption, IO-Link master (V1.1.) as well as many other communication and technology modules allow you to adapt the system to every automation task. The accessories available for ET 200SP range from colored and non-coloured reference identification plates to marking labels for individual modules and ensure maximum visibility in the electrical panel. General Information Product type designation: F-DQ 8x24 VDC/0.5 A PP HFFirmware update possible: YesUsable BaseUnits: BU type A0Color code for coding plate a module specification colors: CC02 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesVoltage supply required according to NEC class 2: No Input Current Current consumption (nominal value): 75 mA; without loadCurrent consumption, max.: 21 mA; from the backplane bus Output voltage / header Rated value (DC): 24 V PowerPower draw from backplane bus: 70 mW Power dissipationPower dissipation, typ. 3 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES7131-6BH01-0BA0 Digital input module, DI 16x 24V DC Standard, Input type 3 (IEC 61131), Sink Input, (PNP, read on P). Packaging unit: 1 piece suitable for BU type A0, Color code CC00, Input delay 0.05..20ms; Diagnostics module for: wire break, supply voltage General Information: Product type designation: DI 16x24VDC STHardware version: From FS02Firmware version: V0.0Possible FW update: NoUsable BaseUnits: BU type A0Color code for module-specific color coding plate: CC00 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Input Current Current consumption, max:. 90 mA

Read more less

SIEMENS SITOP PSU300S 40A  SIEMENS SITOP PSU300S STABILIZED POWER SUPPLY  6EP1437-2BA20 *Ex approval no longer available* The three-phase SITOP smart are the universal and high-performance standard power supplies for machine and plant construction. Despite their compact design, they have an excellent overload characteristic: Thanks to the 150% Extra Power, loads with high current consumption can be switched on without any problem and the continuous overload capability of 120% offers power reserves for possible expansions. The high efficiency guarantees low energy consumption and reduced heat generation in the electrical panel. To further increase the availability of 24 V, SITOP smart power supplies can be combined with buffer, DC-USV, redundancy and selective modules. Regardless of the industry and requirements, Siemens offers reliable and efficient power supplies for every installation. Type of supply voltage: ACOutput voltage 1: 24...24 VMax. Output current 1: 40 AAdjustable output voltage: yesOutput voltage rating 1: 24 VOutput current rating 1: 40 AShort-proof circuit: yesRated AC supply voltage 50 Hz: 400...400 VNominal AC supply voltage 60 Hz: 500...500 VStabilised output voltage: yesPower consumption: 89 VAOutput power: 960 WStabilised: yesType of electrical connection: Screw connectionPossibilities rail mounting: yesWall mountable: noSuitable for modular mounting: yesRecessing width: 145 mmRecessing height: 225 mmDirect mounting possible: noWidth: 145 mmHeight: 145 mmDepth: 150 mmProtection degree (IP): IP20

Read more less

SIEMENS SIMATIC ET 200SP 6ES7131-6BF01-0BA0 Digital input module, DI 8x 24VDC Standard, Input type 3 (IEC 61131), Sink Input, (PNP, read on P), Packaging unit: 1 piece suitable for BU type A0, Color code CC01, Input delay 0.05..20ms; Diagnostics module for: short circuit in encoder supply, wire break, supply voltage. General information Product type designation: DI 8x24 VDC ST Hardware version: From FS02Firmware version: V0.0● Possible FW update: NoUsable BaseUnits: BU type A0Color code for specific color coding label of module: CC01 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Transducer power supply Number of outputs 8Output voltage, min. 19.2 VShort circuit protection Yes; per moduleTransducer supply 24 V● 24 V Yes● Short-circuit protection Yes● Output current, max. 700 mA● Output current per channel, max. 700 mA● Output current per module, max. 700 mA Power dissipationPower dissipation, typ. 1W; 24 V, 8 inputs powered by the transducer power supply

Read more less

SIEMENS SITOP PSU8200 Power supply 24v 20a 6EP3436-8SB00-0AY0 SITOP PSU8200 24 V/20 A stabilized power supply input: 3 AC 400 ... 500 V output: DC 24 V/20 A *Ex approval no longer available* Entrance Three-phase AC power network shapesupply voltage with AC● min. nominal value 400 V● max. nominal value 500 V● initial value 320 V● final value 575 VInput execution wide-range input Yesoperating condition of the buffer due to lack of  mains voltageWith Ue = 400 Vbuffering time with nominal current value  output in case of mains voltage failure min.  15 msoperating condition of the buffer due to lack of  mains voltageWith Ue = 400 Vnetwork frequency● 1 nominal value 50 Hz● 2 nominal value 60 HzMains frequency 47 ... 63 Hzinput current● with input voltage rating 400V 1.2A● with input voltage rating 500V 1Acurrent limitation of the inrush current at 25 °C max. 16 AI2t value max. 0.8 A² sExecution of protection No● of the network cable Required: circuit breaker with three-pole coupling 6 ... 16 ACharacteristic C or circuit breaker 3RV2011-1DA10 (settingon 3 A) or 3RV2711-1DD10 (UL 489)

Read more less

SIEMENS SITOP PSU300S 20 A (DC 24) 6EP1436-2BA10 Stabilized power supply input: 3 AC 400 ... 500 V output: DC 24 V/20 A *Ex approval no longer available* Entrance Three-phase AC power network shapesupply voltage with AC● min. nominal value 400 V● max. nominal value 500 V● initial value 340 V● final value 550 VInput execution wide-range input Yesoperating condition of the buffer due to lack of  mains voltageWith Ue = 400 Vbuffering time with nominal current value  output in case of mains voltage failure min.6 msoperating condition of the buffer due to lack of  mains voltageWith Ue = 400 Vnetwork frequency● 1 nominal value 50 Hz● 2 nominal value 60 HzMains frequency 47 ... 63 Hzinput current● with input voltage rating 400V 1.2A● with input voltage rating 500V 1Acurrent limitation of the inrush current at 25 °C max. 36 AI2t value max. 0.9 A² sExecution of protection No● of the network cable Required: circuit breaker with three-pole coupling 6 ... 16 ACharacteristic C or circuit breaker 3RV2011-1DA10 (setting  on 3 A) or 3RV2711-1DD10 (UL 489-listed, DIVQ)

Read more less

SIEMENS SIMATIC HMI 6AV2125-2AE23-0AX0 Connection box SIMATIC HMI Advanced for Mobile Panel, Wall mounting, PROFINET and PROFISAFE, Safety relay connection, Bypass emergency stop circuit, Connection point identification, integrated switch, MRP Client, IRT. General informationProduct type designation: Connection box Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 V Input current Current consumption (nominal value): 95 mACurrent pulse on insertion I²t: 0.16 A²·s Power dissipated Power dissipation, typ.: 2.3 W

Read more less

SIEMENS SIMATIC HMI TP1200 6AV21240MC010AX0 Comfort Panel, touch operation, 12" widescreen TFT display, 16 million colours, PROFINET interface, MPI/PROFIBUS DP interface, 12 MB configuration memory, Windows CE 6.0, configurable from WinCC Comfort V11 General informationProduct type designation: TP1200 Comfort Display Display design: TFTScreen diagonal: 12.1 inDisplay width: 261.1 mmDisplay height: 163.2 mmNumber of colours: 16 777 216 Resolution (pixels)● Horizontal image resolution: 1 280 pixels● Vertical image resolution: 800 pixelsBacklight● Backlight MTBF (at 25 °C): 80 000 h● Dimmable backlight: Yes; 0-100 % Input current Current consumption (nominal value): 0.85 ACurrent pulse on insertion I²t: 0.5 A²·s Power Active power consumption, typ.: 20 W ProcessorProcessor type: X86 Memory Flash: YesRAM: YesUsable memory for user data: 12 Mbyte ProtocolsPROFINET: YesSupports protocol for PROFINET IO: YesIRT: Yes; from WinCC V12PROFIBUS: YesSupports protocol for EtherNet/IP: YesMPI: Yes

Read more less

SIEMENS SITOP PSU8200 6EP1336-3BA10 SITOP PSU8200 20 A stabilized power supply input: AC 120 ... 230 V DC 110 ... 220 V output: DC 24 V/20 A *Ex approval no longer available* The SITOP modular single-phase power supplies are technological power supplies for sophisticated solutions that offer maximum functionality for use in complex systems and machines. The wide-range input allows connection to any network in the world and guarantees great safety even in the presence of strong voltage fluctuations. The Power-Boost briefly supplies up to three times the nominal current. And in the event of overload, you can choose between constant current and latching shutdown. The very high efficiency reduces energy consumption and heat generation in the control cabinet, and the compact metal housing saves space. To further increase the availability of the 24 V, SITOP modular power supplies can be combined with buffer modules, DC- USV, redundancy and selective. Entrance Power grid form: Single-phase and two-phase AC or DC Supply voltage at AC min. nominal value: 120 V Supply voltage at AC max. nominal value: 230 V Supply voltage at AC initial value: 85 V Supply voltage at AC final value: 275 VSupply voltage with DC: 110 ... 220 VInput voltage at DC: 88 ... 350 V Input design wide-range input: YesOperating condition of the buffering in the event of a mains voltage failure: At Ue = 230 V Buffering time with nominal value of the output current in the event of a mains voltage failure min.: 20 msOperating condition of the buffering due to lack of mains voltage: With Ue = 230 VMains frequency 1 rated value: 50 Hz Mains frequency 2 rated value: 60 HzMains frequency: 47 ... 63 HzInput current at rated input voltage 120 V: 4.6 A Input current at rated input voltage 230 V: 2.5 A Current limitation of the inrush current at 25 °C max.: 20 AMax. I2t value: 5 A²·sProtection Execution: Yesof the mains cable: Recommended circuit breaker for single-phase operation: 10 Afeature C; required for two-phase operation: circuit breaker with bipolar coupling or circuit breaker3RV2711-1HD10(UL 489) with 120 V or 3RV2711-1ED10 (UL 489) with 230V

Read more less

SIEMENS SIMATIC HMI KTP700 BASIC  (DC 24 - 5.5 W) 6AV2123-2GB03-0AX0 Basic Panel, key/touch operation, 7" TFT display, 65536 colours, PROFINET interface, configurable from WinCC Basic V13/STEP 7 Basic V13, includes open source software, provided free of charge see the attached CD General information: Product type designation KTP700 Basic color PN Display Display design TFT display Widescreen, LED backlightScreen diagonal 7 inDisplay width 154.1 mmDisplay height 85.9 mmNumber of colors 65 536 Supply voltage Type of supply voltage DCRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8 V Input current Current consumption (nominal value) 230 mACurrent pulse on insertion I²t 0.2 A²·s Power dissipated Active power consumption, typ. 5.5 W

Read more less

Siemens sinamics control unit 6SL3040-1MA01-0AA0 Control Unit PN without CompactFlash Card Digital inputsDigital inputsNumber:12Voltage:-3 ... 30 VLow level:-3 ... 5 VHigh level:15 ... 30 VCurrent consumption at DC 24 V, typical:3.5 mADelay time L→H, typ. : 50 μsH→L delay time, typ. :150 μs As output Permanent short-circuit proof: YesVoltage: DC 24 VLoad current per digital output, max.: 500 mADelay time L→H, typ./ max.: 150 μs / 400 μsH→L delay time, typ./ max.: 75 μs / 100 μs Electrical data Electronics power supply: 24 V DC (20.4 ... 28.8 V)Current consumption, max. :1.0 APower dissipation, max.: 24 WProtection, max.: 20 A

Read more less

SIEMENS SIMATIC S7-1500F 6ES7516-3FN02-0AB0 CPU 1516F-3 PN/DP, central processing unit with work memory of 1.5 MB for program and 5 MB for data, 1st interface: PROFINET IRT with 2-port switch, 2nd interface: PROFINET RT, 3rd interface: PROFIBUS , 10 ns bit performance, SIMATIC Memory Card required . General informationProduct type designation: CPU 1516F-3 PN/DPHardware version: FS01Firmware version: V2.9Product function● I&M data: Yes; I&M0 ... I&M3● Isochronous operation: Yes; Decentrally and centrally; with min. OB 6 x cycle of 375 µs (decentrally) and 1 ms (centrally)  Engineering with● STEP 7 TIA Portal configurable/integrated from version: V17 (FW V2.9) / V16 ( FW V2.8) or higher; with previous versions of TIA Portal configurable as 6ES7516-3FN01-0AB0 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Input current Current consumption (nominal value): 0.85 ACurrent consumption, max.: 1.1 AInrush current, max.: 2.4 A; Nominal valueI²t: 0.02 A²·s Power dissipation Power dissipation, typ.: 7 W

Read more less

SIEMENS SIMATIC ET 200SP (DC 24 V - 335 mA) 6ES7155-6BA01-0CN0 PROFIBUS IM bundle, IM 155-6DP HF, max. 32 peripheral modules and 16 ET 200AL modules, Multi Hot Swap, the bundle includes: interface module (6ES7155-6BU01-0CN0), server module (6ES7193-6PA00-0AA0), PROFIBUS connector (6ES7972-0BB70-0XA0. General informationProduct type designation: IM 155-6 DP HFHardware version: From FS02Firmware version: V4.2Possible FW update: Yes Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesShort-circuit protection: YesInterruption buffering time mains/voltage: 10 msInput current Current consumption, max.: 335 mAInrush current, max.: 1.6 AI²t: 0.038 A²·s Power Active power consumption, typ.: 1.5 W

Read more less

SIEMENS SIMATIC DP (DC 24V - 0.4 A) 6ES71366AA000CA1 ET 200SP electronics module, F-AI 4xI0(4)..20mA HF fail-safe analog inputs up to PL e (ISO 13849) up to SIL 3 (IEC 61508) General informationProduct type designation: F-AI 4xI 0(4)..20mA 2-/4-wire HFPossible FW update; YesUsable BaseUnits: BU type A0, A1Color code for module-specific color coding label:CC00 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection: YesVoltage supply required according to NEC class 2: NoInput current Current consumption (nominal value): 0.38 ACurrent consumption, max.: 0.4 A Power dissipation Power dissipation, typ.: 2 W

Read more less