SIEMENS SIMATIC S7-1200 6ES7223-1BH32-0XB0 SIMATIC S7-1200, digital I/O SM 1223, 8 DI/8 DO, 8 DI DC 24V, Sink/Source, 8 DO, Transistor 0.5A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs. General Information Product type designation: SM 1223, DI 8x24 VDC, DQ 8x24 VDC Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 20.4 VAllowable range, upper limit (DC): 28.8 V Input current from backplane bus DC 5 V, max. 145 mADigital inputs from load voltage L+ (without load), max. 4 mA; for channel Dissipated Power Power dissipation, typ. 2.5 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES7193-6BP20-0DA0 SIMATIC ET 200SP, Basic unit BU15-P16+A10+2D, BU type A0, push-in clamps, with 10 out clamps. , new load group, LaxA: 15 mmx141 mm. General information Product type name BU type A0Hardware version from FS07 Supply voltage Nominal value (DC) 24 VExternal protection of the power cables Yes; DC 24 V/ 10 A magnetic circuit breaker with release feature type B or C Current flow rate for bar P1 and bar P2, max. 10 Afor AUX bar, max. 10 Afor process clamps, max. 2 A Hardware configuration Formation of potential groupsNew potential group YesPotential group continued from left No SlotNumber of slots 1; Type A0 Separation of potential Among potential groups Yes Isolation Insulation tested with DC 707 V (Type Test)  

Read more less

SIEMENS SIMATIC DP, CPU 1510SP-1 PN for ET 200SP  6ES75101DJ010AB0  SIMATIC DP, CPU 1510SP-1 PN for ET 200SP, central processing unit with working memory of 100 KB for the program and 750 KB for data, 1st interface: PROFINET IRTwith 3 Port Switch , Bit performance of 72 NS, SIMATIC Memory Card required,bus adapter required for port 1 and 2 General Information: Product type designation: CPU 1510SP-1 PN Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesMains and voltage interruption bufferingMains/voltage interruption buffering time: 5 ms Input Current Current consumption (nominal value): 0.6 ACurrent consumption, max.: 0.9 AInrush current, max.: 4.7 A; Nominal valueI²t: 0.14 A²·s Power Supply power in the backplane bus: 8.75 W Dissipated Power Power dissipation, typ.: 5.6 W Memory Number of slots for SIMATIC Memory Card: 1SIMATIC Memory Card required: YesIntegrated work memory (for program): 100 kbyteIntegrated work memory (for data) : 750 KBInsertable load memory (SIMATIC Memory Card), max.: 32 GB Maintenance-free backup: Yes

Read more less

SIEMENS SIMATIC ANALOG INPUT SM 1231, 4AIS7-1200 6ES72314HD320XB0 Analog input module, SM 1231, 4 AI, +/-10 V, +/-5 V, +/-2.5V, or 0-20mA/4-20mA, 12 bits + sign (13 Bit ADC) SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs. General Information Product type designation: SM 1231, AI 4x 13 bit Supply Voltage Rated value (DC): 24 V Input Current Current consumption, typ.: 45 mA from 5 V DC backplane bus, typ.: 80 mA Analog Inputs Number of analog inputs: 4; Current or voltage differential inputs Permitted input voltage for voltage input(destruction limit), max.: 35 VPermitted input current for current input (destruction limit), max.: 40 mA Cycle time (all channels), max.: 625 μs

Read more less

SIEMENS SIMATIC S7-300 6ES7322-1BL00-0AA0 Digital output module SM 322, electrically isolated, 32DA, DC 24V, 0.5A, 1 x 40-pole, total current 4A/group (16A/Baugruppe). Supply voltage Load voltage L+Rated value (DC): 24 VAllowable range, lower limit (DC): 20.4 VAllowable range, upper limit (DC): 28.8 V Input current from load voltage L+ (without load), max.: 160 mAfrom backplane bus DC 5 V, max.: 110 mA Power dissipated Power dissipation, typ.: 6.6 W Digital Releases Number of outputs: 32Short circuit protection: Yes; electronicTripping threshold, typ.: 1 ALimitation of the inductive opening extra voltage on L+: (-53 V)Control of a digital input: Yes

Read more less

SIEMENS SIMATIC ET 200SP 6ES7131-6BH01-0BA0 Digital input module, DI 16x 24V DC Standard, Input type 3 (IEC 61131), Sink Input, (PNP, read on P). Packaging unit: 1 piece suitable for BU type A0, Color code CC00, Input delay 0.05..20ms; Diagnostics module for: wire break, supply voltage General Information: Product type designation: DI 16x24VDC STHardware version: From FS02Firmware version: V0.0Possible FW update: NoUsable BaseUnits: BU type A0Color code for module-specific color coding plate: CC00 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Input Current Current consumption, max:. 90 mA

Read more less

SIEMENS SENTRON PAC3220 LCD 96x96 mm Power Monitoring 7KM3220-0BA01-1DA0 Device built-in device in control panel for measuring electrical quantities protocol: Modbus TCP with graphic display Ue nom: 690/400 V 45 ... 65 Hz Ie nom: X/1A or X/5A AC auxiliary energy: AC/ DC 100 ... 250 V +-10 % connection with screw terminals Measures Measurement method for voltage measurement: TRMSMeasurement method for current measurement: TRMSType of measurement value acquisition: without spacesVoltage curve shape: sinusoidal or distortedMeasurable network frequencyInitial value: 45 HzFinal value: 65 HzOperating mode for measuring value detection automatic mains frequency detection: YesOperating mode for measuring value detection50Hz Fixing: No60Hz Fixing: No Supply voltage Power supply voltage execution: wide voltage power supplyPower supply voltage type: AC/DCSupply voltage with AC: 100 ... 250 VSupply voltage with DC: 100 ... 250 V Communication Min. transmission speed: 10 000 kbit/sMax. transmission speed: 100 000 kbit/sNumber of interfaces according to Fast Ethernet: 2Electrical connection of the Fast Ethernet interface: 2 x RJ45Protocol on Ethernet interface is supported: MODBUS TCP

Read more less

SIEMENS SIMATIC ET 200SP 6ES7134-6GF00-0AA1 Analog input module, AI 8XI 2-/4-Wire Basic, suitable for BU type A0, A1, Color code CC01, Diagnostic module, 16 bit. General information Product type designation AI 8xI 2-/4-wire BAHardware version from FS04Firmware version● FW update possible YesUsable BaseUnits BU type A0, A1Color code for specific color coding plate of module CC01 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Input current Current consumption, max. 25mA; without transducer power supply Power dissipated Power dissipation, typ. 0.7W; without transducer power supply voltage

Read more less

SIEMENS SITOP PSU300S 40A  SIEMENS SITOP PSU300S STABILIZED POWER SUPPLY  6EP1437-2BA20 *Ex approval no longer available* The three-phase SITOP smart are the universal and high-performance standard power supplies for machine and plant construction. Despite their compact design, they have an excellent overload characteristic: Thanks to the 150% Extra Power, loads with high current consumption can be switched on without any problem and the continuous overload capability of 120% offers power reserves for possible expansions. The high efficiency guarantees low energy consumption and reduced heat generation in the electrical panel. To further increase the availability of 24 V, SITOP smart power supplies can be combined with buffer, DC-USV, redundancy and selective modules. Regardless of the industry and requirements, Siemens offers reliable and efficient power supplies for every installation. Type of supply voltage: ACOutput voltage 1: 24...24 VMax. Output current 1: 40 AAdjustable output voltage: yesOutput voltage rating 1: 24 VOutput current rating 1: 40 AShort-proof circuit: yesRated AC supply voltage 50 Hz: 400...400 VNominal AC supply voltage 60 Hz: 500...500 VStabilised output voltage: yesPower consumption: 89 VAOutput power: 960 WStabilised: yesType of electrical connection: Screw connectionPossibilities rail mounting: yesWall mountable: noSuitable for modular mounting: yesRecessing width: 145 mmRecessing height: 225 mmDirect mounting possible: noWidth: 145 mmHeight: 145 mmDepth: 150 mmProtection degree (IP): IP20

Read more less

SIEMENS SIMATIC DP (DC 24 V - 21 MA) 6ES7-136-6BA00-0CA0 Electronics module for ET 200SP, F-DI 8x 24VDC HF, 15mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General information Product type designation F-DI 8x24VDC HFUsable BaseUnits BU type A0 Product function● I&M data Yes; I&M0 ... I&M3 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection YesVoltage supply required according to NEC class 2 No Input current Current consumption (nominal value) 75 mA; without loadCurrent consumption, max. 21 mA; from the backplane bus Power Power draw from the backplane bus 70 mW Power dissipated Power dissipation, typ. 4 W

Read more less

SIEMENS SIMATIC ET 200SP, TM count 1x 24V counting unit, 1 channel for 24 V incremental transducer or pulse generator, 3 DI, 2 DQ, suitable for BU type A0 6ES7138-6AA01-0BA0 General information Product type designation: TM Count 1x24VFirmware version V2.0FW update possible: YesUsable BaseUnits: BU type A0Color code for coding plate a color specification ofmodule: CC00 Supply voltage Rated value (DC): 24 VLoad voltage L+Rated value (DC): 24 VPermitted range, lower limit (DC): 19.2 VPermitted range , upper limit (DC): 28.8 VReverse polarity protection: Yes Power dissipated Power dissipation, typ. 1 W

Read more less

SIEMENS SITOP PSU300S 20 A (DC 24) 6EP1436-2BA10 Stabilized power supply input: 3 AC 400 ... 500 V output: DC 24 V/20 A *Ex approval no longer available* Entrance Three-phase AC power network shapesupply voltage with AC● min. nominal value 400 V● max. nominal value 500 V● initial value 340 V● final value 550 VInput execution wide-range input Yesoperating condition of the buffer due to lack of  mains voltageWith Ue = 400 Vbuffering time with nominal current value  output in case of mains voltage failure min.6 msoperating condition of the buffer due to lack of  mains voltageWith Ue = 400 Vnetwork frequency● 1 nominal value 50 Hz● 2 nominal value 60 HzMains frequency 47 ... 63 Hzinput current● with input voltage rating 400V 1.2A● with input voltage rating 500V 1Acurrent limitation of the inrush current at 25 °C max. 36 AI2t value max. 0.9 A² sExecution of protection No● of the network cable Required: circuit breaker with three-pole coupling 6 ... 16 ACharacteristic C or circuit breaker 3RV2011-1DA10 (setting  on 3 A) or 3RV2711-1DD10 (UL 489-listed, DIVQ)

Read more less

SIEMENS SITOP PSU8200 Power supply 24v 20a 6EP3436-8SB00-0AY0 SITOP PSU8200 24 V/20 A stabilized power supply input: 3 AC 400 ... 500 V output: DC 24 V/20 A *Ex approval no longer available* Entrance Three-phase AC power network shapesupply voltage with AC● min. nominal value 400 V● max. nominal value 500 V● initial value 320 V● final value 575 VInput execution wide-range input Yesoperating condition of the buffer due to lack of  mains voltageWith Ue = 400 Vbuffering time with nominal current value  output in case of mains voltage failure min.  15 msoperating condition of the buffer due to lack of  mains voltageWith Ue = 400 Vnetwork frequency● 1 nominal value 50 Hz● 2 nominal value 60 HzMains frequency 47 ... 63 Hzinput current● with input voltage rating 400V 1.2A● with input voltage rating 500V 1Acurrent limitation of the inrush current at 25 °C max. 16 AI2t value max. 0.8 A² sExecution of protection No● of the network cable Required: circuit breaker with three-pole coupling 6 ... 16 ACharacteristic C or circuit breaker 3RV2011-1DA10 (settingon 3 A) or 3RV2711-1DD10 (UL 489)

Read more less

SIEMENS SIMATIC HMI KTP700 BASIC  (DC 24 - 5.5 W) 6AV2123-2GB03-0AX0 Basic Panel, key/touch operation, 7" TFT display, 65536 colours, PROFINET interface, configurable from WinCC Basic V13/STEP 7 Basic V13, includes open source software, provided free of charge see the attached CD General information: Product type designation KTP700 Basic color PN Display Display design TFT display Widescreen, LED backlightScreen diagonal 7 inDisplay width 154.1 mmDisplay height 85.9 mmNumber of colors 65 536 Supply voltage Type of supply voltage DCRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8 V Input current Current consumption (nominal value) 230 mACurrent pulse on insertion I²t 0.2 A²·s Power dissipated Active power consumption, typ. 5.5 W

Read more less

SIEMENS SIMATIC S7-1500 6ES7515-2AM02-0AB0 CPU 1515-2 PN, central processing unit with work memory 500 KB for program and 3 MB for data, 1st interface: PROFINET IRT with 2-port switch, 2nd interface: PROFINET RT, bit performance of 30 ns, SIMATIC Memory Card required General information Product type designation CPU 1515-2 PNHardware version FS01Firmware version V2.9 Product function ● I&M data Yes; I&M0 ... I&M3● Isochronous operation Yes; Decentrally and centrally; with min. OB 6 x cycle of 500 μs (decentrally) and 1 ms (centrally) Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Input current Current consumption (nominal value) 0.8 ACurrent consumption, max. 1.1 AInrush current, max. 2.4A; Nominal valueI²t 0.02 A²·s Power Power supply in the backplane bus 12 WPower absorbed by the backplane bus (balanced) 6.2 W Power dissipated Power dissipation, typ. 6.3 W Memory Number of slots for SIMATIC Memory Card 1SIMATIC Memory Card required Yes

Read more less

SIEMENS SIMATIC ET 200SP 6ES7-193-6BP00-0BA0 Basic unit BU15-P16+A0+2B, BU type A0, Push-in terminals, without aux. terminals, bridged to the left, WxH: 15x 117 mm. General information Product type designation: BU type A0Version Hardware: from FS06 Supply voltage Rated value (DC) 24 VExternal protection of power cables Yes; DC 24 V / 10 A thermal magnetic switch with tripping characteristic type B or C Main filter● integrated No Current range for busbar P1 and busbar P2, max. 10 Afor process terminals, max. 2 A

Read more less

SIEMENS SIMATIC S7-1200 6ES72151AG400XB0 CPU 1215C, compact CPU, DC/DC/DC, 2 PROFINET ports, onboard I/O: 14 DI 24VDC; 10 DO 24VDC; 0.5A; 2 AI 0-10V DC, 2 AO 0-20mA DC, power supply: DC 20.4-28.8V DC, Program/data memory 125 KB. General information Product type designation: CPU 1215C DC/DC/DC Firmware version: V4.5 Supply voltage Rated value DC 24 VAllowable range, lower limit (DC) : 20.4 VAllowable range, upper limit (DC) : 28.8 VReverse polarity protection: YES Input current Current consumption (nominal value) 500 mA; CPU only Current consumption, max. 1 500 mA; CPU with all expansion modules Inrush current, max. 12A; at DC 28.8 V I²t 0.5 A²·s Power dissipated Power dissipation, typ. 12 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES71936AR000AA0 BA 2xRJ45 bus adapter, 2 RJ45 sockets General information Product type designation: BA 2 x RJ45   Interfaces Number of PROFINET interfaces: 1Supports protocol for PROFINET IO● Number of RJ45 ports 2Cable length — Copper conductors 100 m  

Read more less

SIEMENS SCALANCE XC208 6GK5208-0BA00-2AC2 Manageable IE Switch Layer 2; IEC 62443-4-2 certified; 8x 10/100 Mbit/s RJ45 ports; 1x console port; Diagnostics LED; Redundant power supply; Temperature range -40 °C...+70 °C; Installation: DIN rail/S7 profile/wall-mounted Redundancy functions Office Features (RSTP, VLAN,...); PROFINET IO Device compliant with Ethernet/IP C-PLUG slot. General information Product type designation: SCALANCE XC208 Transmission speedTransmission speed 10 Mbit/s, 100 Mbit/s Interfaces / for communication / max. configuration with modular devicesNumber of electric doors / max. 8 Interfaces / for communication / integr. Number of electrical connections● for network components or terminal equipment 8; RJ45number of 10/100 Mbit/s RJ45 ports / integr.● with retention collar 8 Interfaces / others number of electrical connections● for control console 1● for signal contact 1● for voltage supply 1making the electrical connection● for RJ11 control console● for voltage supply 4-pole terminal blockRemovable storage media execution● C-PLUG Yes Signal inputs/outputs operating voltage / of the signal contacts● with DC / nominal value 24 Voperating current / of the signaling contacts● with DC / max. 0.1 A Supply voltage, current consumption, power dissipation integral part of the product / power supply connection  redundant tension  Yesvoltage type / 1 / of the DC supply voltage● supply voltage / 1 / nominal value 24 V● power dissipation [W] / 1 / nominal value 4.2 W● current consumption / 1 / with nominal voltage valuepower supply / max.0.175 A● supply voltage / 1 / nominal value 9.6 ... 31.2 V● current consumption / 1 / max. 0.35 A● execution of the electrical connection / 1 / for  voltage supply  4-pole terminal block● integral part of the product / 1 / ingress protection  of power supply  Yes

Read more less

SIEMENS SIMATIC ET 200SP 6ES7131-6BF01-0BA0 Digital input module, DI 8x 24VDC Standard, Input type 3 (IEC 61131), Sink Input, (PNP, read on P), Packaging unit: 1 piece suitable for BU type A0, Color code CC01, Input delay 0.05..20ms; Diagnostics module for: short circuit in encoder supply, wire break, supply voltage. General information Product type designation: DI 8x24 VDC ST Hardware version: From FS02Firmware version: V0.0● Possible FW update: NoUsable BaseUnits: BU type A0Color code for specific color coding label of module: CC01 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Transducer power supply Number of outputs 8Output voltage, min. 19.2 VShort circuit protection Yes; per moduleTransducer supply 24 V● 24 V Yes● Short-circuit protection Yes● Output current, max. 700 mA● Output current per channel, max. 700 mA● Output current per module, max. 700 mA Power dissipationPower dissipation, typ. 1W; 24 V, 8 inputs powered by the transducer power supply

Read more less

SIEMENS SIMATIC DP, CPU 1512SP-1 PN 6ES75121DK010AB0 CPU 1512SP-1 PN for ET 200SP, central unit with work memory 200 KB for the program and 1 MByte for data 1st interface: PROFINET IRT with 3 Port Switch, bit performance of 48 ns, SIMATIC Memory Card required, bus adapter required for port 1 and 2 General information Product type designation: CPU 1512SP-1 PNHardware version: FS05Firmware version: V2.9 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VProtection from polarity reversal: YesMains and voltage interruption buffering● Mains/voltage interruption buffering time: 5 ms Input currentCurrent consumption (nominal value): 0.6 ACurrent consumption, max.: 0.9 AInrush current , max.: 4.7 A; Nominal valueI²t: 0.14 A²·s Power dissipationPower dissipation, typ:. 5.6 W  

Read more less

Siemens sinamics control unit 6SL3040-1MA01-0AA0 Control Unit PN without CompactFlash Card Digital inputsDigital inputsNumber:12Voltage:-3 ... 30 VLow level:-3 ... 5 VHigh level:15 ... 30 VCurrent consumption at DC 24 V, typical:3.5 mADelay time L→H, typ. : 50 μsH→L delay time, typ. :150 μs As output Permanent short-circuit proof: YesVoltage: DC 24 VLoad current per digital output, max.: 500 mADelay time L→H, typ./ max.: 150 μs / 400 μsH→L delay time, typ./ max.: 75 μs / 100 μs Electrical data Electronics power supply: 24 V DC (20.4 ... 28.8 V)Current consumption, max. :1.0 APower dissipation, max.: 24 WProtection, max.: 20 A

Read more less

SIEMENS SIMATIC HMI TP1200 6AV21240MC010AX0 Comfort Panel, touch operation, 12" widescreen TFT display, 16 million colours, PROFINET interface, MPI/PROFIBUS DP interface, 12 MB configuration memory, Windows CE 6.0, configurable from WinCC Comfort V11 General informationProduct type designation: TP1200 Comfort Display Display design: TFTScreen diagonal: 12.1 inDisplay width: 261.1 mmDisplay height: 163.2 mmNumber of colours: 16 777 216 Resolution (pixels)● Horizontal image resolution: 1 280 pixels● Vertical image resolution: 800 pixelsBacklight● Backlight MTBF (at 25 °C): 80 000 h● Dimmable backlight: Yes; 0-100 % Input current Current consumption (nominal value): 0.85 ACurrent pulse on insertion I²t: 0.5 A²·s Power Active power consumption, typ.: 20 W ProcessorProcessor type: X86 Memory Flash: YesRAM: YesUsable memory for user data: 12 Mbyte ProtocolsPROFINET: YesSupports protocol for PROFINET IO: YesIRT: Yes; from WinCC V12PROFIBUS: YesSupports protocol for EtherNet/IP: YesMPI: Yes

Read more less

SIEMENS SIMATIC S7-1500F (DC 24 V - 1.1 A) 6ES75152FM020AB0   CPU 1515F-2 PN, central unit with work memory 750 KB for program and 3 MB for data, 1st interface: PROFINET IRT with 2-port switch, 2nd interface: PROFINET RT, bit performance of 30 ns, SIMATIC Memory Card required. General informationProduct type designation: CPU 1515F-2 PNHardware version: FS01Firmware version: V2.9 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC):: 28.8 VReverse protection polarity: Yes Input current Current consumption (nominal value): 0.8 ACurrent consumption, max.: 1.1 AInrush current, max.: 2.4 A; Nominal valueI²t: 0.02 A²·s Power Power supply in the backplane bus: 12 WPower consumption from the backplane bus (balanced): 6.2 W Power dissipated Power dissipation, typ.: 6.3 W

Read more less