INDUSTRIAL AUTOMATION

SIEMENS SIMATIC DP (DC 24 V - 21 MA) 6ES71366BA000CA0 Electronics module for ET 200SP, F-DI 8x 24VDC HF, 15mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General information Product type designation F-DI 8x24VDC HFUsable BaseUnits BU type A0 Product function● I&M data Yes; I&M0 ... I&M3 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection YesVoltage supply required according to NEC class 2 No Input current Current consumption (nominal value) 75 mA; without loadCurrent consumption, max. 21 mA; from the backplane bus Power Power draw from backplane bus 70 mW Power dissipated Power dissipation, typ. 4 W  

Read more less

SIEMENS SIMATIC ET 200SP 6ES71346GF000AA1 Analog input module, AI 8XI 2-/4-Wire Basic, suitable for BU type A0, A1, Color code CC01, Diagnostic module, 16 bit. General information Product type designation AI 8xI 2-/4-wire BAHardware version from FS04Firmware version● FW update possible YesUsable BaseUnits BU type A0, A1Color code for module-specific color coding plate CC01 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Input current Current consumption, max. 25mA; without transducer power supply Power dissipated Power dissipation, typ. 0.7W; without transducer power supply voltage  

Read more less

SIEMENS SIMATIC ET 200SP 6ES71326BF010BA0 Digital output module, DQ 8x 24V DC/0.5A Standard, Source Output (PNP, P-switching) Packaging unit: 1 piece suitable for BU type A0, Color code CC02, substitute value output , Diagnostics module for: Short circuit to L+ and M, wire break, supply voltage. General information:Product type designation: DQ 8x24VDC/0.5A STHardware version: From FS02Firmware version: V0.0Possible FW update: NoUsable BaseUnits: BU type A0Color code for module-specific color coding label: CC02 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YES Input current Current consumption (nominal value): 35 mA; without load Power dissipated Power dissipation, typ.: 1 W

Read more less

SIEMENS SIMATIC DP 6ES71366DC000CA0 SIMATIC DP, electronics module ET 200SP, F-DQ 8X24VDC/0.5A PP, width 15mm, up to PL E (ISO 13849) up to SIL 3 (IEC 61508) With the SIMATIC ET 200SP, Siemens offers a distributed, multifunctional I/O system that can be easily put into service thanks to its space-saving design. It is approved for IP20 protection and designed for installation in a compact distribution box. The system ensures maximum flexibility, allowing modules to be replaced quickly and easily at any time thanks to Multi Hot Swapping. Furthermore, the SIMATIC ET 200SP offers you a wide range of communication channels, both diverse and fast. Thanks to the integration of the IM155-6MF MultiFieldbus interface module, you can always react flexibly and use the optimal protocol for your application, as this function supports different Ethernet protocols. Assembly and service are simplified by a uniform identification system, based on reference identification plates and color-coded pin assignment. Siemens ensures you future-proof systems with the integration of innovative and at the same time long-lasting automation products, in fact as industry experts you are already investing today in the technologies of tomorrow and thus redefining market standards. The continuous availability of data, the flexibility of the application cases and the versatile integration options ensure the excellent performance of the ET 200 products. The scalable and cost-optimised configuration of an ET 200SP station is ensured by the wide range of I/O modules. In addition to digital and analog input and output modules, fail-safe variants are also available for applications up to SIL 3 / PLe. This also applies to integrated motor starters, which are suitable for motors up to 5.5 kW. Energy meters for measuring and analyzing energy consumption, IO-Link master (V1.1.) as well as many other communication and technology modules allow you to adapt the system to every automation task. The accessories available for ET 200SP range from colored and non-coloured reference identification plates to marking labels for individual modules and ensure maximum visibility in the electrical panel. General Information Product type designation: F-DQ 8x24 VDC/0.5 A PP HFFirmware update possible: YesUsable BaseUnits: BU type A0Color code for coding plate a module specification colors: CC02 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesVoltage supply required according to NEC class 2: No Input Current Current consumption (nominal value): 75 mA; without loadCurrent consumption, max.: 21 mA; from the backplane bus Output voltage / header Rated value (DC): 24 V PowerPower draw from backplane bus: 70 mW Power dissipationPower dissipation, typ. 3 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES71316BH010BA0 Digital input module, DI 16x 24V DC Standard, Input type 3 (IEC 61131), Sink Input, (PNP, read on P). Packaging unit: 1 piece suitable for BU type A0, Color code CC00, Input delay 0.05..20ms; Diagnostics module for: wire break, supply voltage General Information: Product type designation: DI 16x24VDC STHardware version: From FS02Firmware version: V0.0Possible FW update: NoUsable BaseUnits: BU type A0Color code for module-specific color coding label: CC00 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Input Current Current consumption, max:. 90 mA

Read more less

SIEMENS SITOP PSU300S 40A  SIEMENS SITOP PSU300S STABILIZED POWER SUPPLY  6EP14372BA20 *Ex approval no longer available* The three-phase SITOP smart are the universal and high-performance standard power supplies for machine and plant construction. Despite their compact design, they have an excellent overload characteristic: Thanks to the 150% Extra Power, loads with high current consumption can be switched on without any problem and the continuous overload capability of 120% offers power reserves for possible expansions. The high efficiency guarantees low energy consumption and reduced heat generation in the electrical panel. To further increase the availability of 24 V, SITOP smart power supplies can be combined with buffer, DC-USV, redundancy and selective modules. Regardless of the industry and requirements, Siemens offers reliable and efficient power supplies for every system. Type of supply voltage: ACOutput voltage 1: 24...24 VMax. Output current 1: 40 AOutput voltage adjustable: yesOutput voltage rating 1: 24 VOutput current rating 1: 40 AShort-proof circuit: yesRated AC 50 Hz supply voltage: 400...400 VRated AC 60 Hz supply voltage: 500...500 VStabilized output voltage: yesPower absorbed: 89 VAOutput power: 960 WStabilized: yesType of electrical connection: Screw connectionPossibility of rail mounting: yesWall mountable: noSuitable for modular mounting: yesInstallation width: 145 mmInstallation height: 225 mmDirect assembly possible: noWidth: 145 mmHeight: 145 mm Depth: 150 mmProtection degree (IP): IP20

Read more less

SIEMENS SIMATIC ET 200SP 6ES71316BF010BA0 Digital input module, DI 8x 24VDC Standard, Input type 3 (IEC 61131), Sink Input, (PNP, read on P), Packaging unit: 1 piece suitable for BU type A0, Color code CC01, Input delay 0.05..20ms; Diagnostics module for: short circuit in encoder supply, wire break, supply voltage. General information Product type designation: DI 8x24 VDC ST Hardware version: From FS02Firmware version: V0.0● Possible FW update: NoUsable BaseUnits: BU type A0Color code for specific color coding label of module: CC01   Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Transducer power supply Number of outputs 8Output voltage, min. 19.2 VShort circuit protection Yes; per module24 V transducer supply● 24 V Yes● Short-circuit protection Yes● Output current, max. 700 mA● Output current per channel, max. 700 mA● Output current per module, max. 700 mA Power dissipationPower dissipation, typ. 1W; 24 V, 8 inputs powered by the transducer power supply

Read more less

SIEMENS SITOP PSU8200 6EP34368SB000AY0 SITOP PSU8200 24 V/20 A stabilized power supply input: 3 AC 400 ... 500 V output: DC 24 V/20 A *Ex approval no longer available* Entrance form of the three-phase AC electrical networksupply voltage with AC● rated value min. 400 V● rated value max. 500 V● initial value 320 V● final value 575 Vinput execution wide-range input Yesbackup operating condition due to lack of mains voltageWith Ue = 400 Vbuffer time with nominal value of the output current in case of mains voltage failure min. 15 msbackup operating condition due to lack of mains voltageWith Ue = 400 Vmains frequency● 1 nominal value 50 Hz● 2 nominal value 60 Hzmains frequency 47 ... 63 Hzinput current● at rated input voltage 400 V 1.2 A● at rated input voltage 500 V 1 Acurrent limitation of the inrush current to 25 °C max. 16 AI2t value max. 0.8 A² sprotection design No● of the mains cable Required: 3-pole circuit breaker with 3-pole coupling 6 ... 16 Acharacteristic C or circuit breaker 3RV2011-1DA10 (settingon 3 A) or 3RV2711-1DD10 (UL 489)

Read more less

SIEMENS SITOP PSU300S 20 A (DC 24) 6EP14362BA10 Stabilized power supply input: 3 AC 400 ... 500 V output: DC 24 V/20 A *Ex approval no longer available* Entrance form of the three-phase AC electrical networksupply voltage with AC● nominal value min. 400 V● rated value max. 500 V● initial value 340 V● final value 550 Vexecution of the input wide-range input Yesbackup operating condition for lack of mains voltageWith Ue = 400 Vbuffering time with nominal value of the output current in case of mains voltage failure min.6 msbackup operating condition due to mains voltage failureWith Ue = 400 Vmains frequency● 1 nominal value 50 Hz● 2 nominal value 60 Hzmains frequency 47 ... 63 Hzinput current● with value rated input voltage 400 V 1.2 A● at rated input voltage 500 V 1 Acurrent limitation of the inrush current to 25 °C max. 36 AI2t value max. 0.9 A² sProtection design No● of the mains cable Required: 3-pole circuit breaker with 3-pole coupling 6 ... 16 Acharacteristic C or circuit breaker 3RV2011-1DA10 (set to 3 A ) or 3RV2711-1DD10 (UL 489-listed, DIVQ)

Read more less

SIEMENS SIMATIC HMI 6AV21252AE230AX0 Connection box SIMATIC HMI Advanced for Mobile Panel, Wall mounting, PROFINET and PROFISAFE, Safety relay connection, Bypass emergency stop circuit, Identification of connection point, integrated switch, MRP Client, IRT. General informationProduct type designation: Connection box Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 V Input current Current consumption (nominal value): 95 mACurrent pulse on insertion I²t: 0.16 A²·s Power dissipated Power dissipation, typ.: 2.3 W

Read more less

SIEMENS SIMATIC HMI TP1200 6AV21240MC010AX0 Comfort Panel, touch operation, 12" widescreen TFT display, 16 million colours, PROFINET interface, MPI/PROFIBUS DP interface, 12 MB configuration memory, Windows CE 6.0, configurable from WinCC Comfort V11 General informationProduct type designation: TP1200 Comfort Display Display design: TFTScreen diagonal: 12.1 inDisplay width: 261.1 mmDisplay height: 163.2 mmNumber of colours: 16 777 216 Resolution (pixels)● Horizontal image resolution: 1 280 pixels● Vertical image resolution: 800 pixelsBacklight● Backlight MTBF (at 25 °C): 80 000 h● Dimmable backlight: Yes; 0-100 % Input current Current consumption (nominal value): 0.85 ACurrent pulse on insertion I²t: 0.5 A²·s Power Active power consumption, typ.: 20 W ProcessorProcessor type: X86 Memory Flash: YesRAM: YesUsable memory for user data: 12 Mbyte ProtocolsPROFINET: YesSupports protocol for PROFINET IO: YesIRT: Yes; from WinCC V12PROFIBUS: YesSupports protocol for EtherNet/IP: YesMPI: Yes

Read more less

SIEMENS SITOP PSU8200 6EP13363BA10 SITOP PSU8200 20 A stabilized power supply input: AC 120 ... 230 V DC 110 ... 220 V output: DC 24 V/20 A *Ex approval no longer available* SITOP modular single-phase power supplies are technological power supplies for sophisticated solutions that offer maximum functionality for use in complex systems and machines. The wide-range input allows connection to every network in the world and guarantees great safety even in the presence of strong voltage fluctuations. The Power-Boost provides up to three times the rated current for a short time. And in the event of an overload you can choose between constant current and latching shutdown. The very high efficiency reduces energy consumption and heat generation in the control cabinet and the compact metal housing saves space. To further increase the availability of 24 V, SITOP modular power supplies can be combined with buffer, DC-USV, redundancy and selective modules. Entrance Form of the electrical network: Single-phase and two-phase AC or DC Supply voltage at AC min. rated value: 120 V Supply voltage at AC max. rated value: 230 V Supply voltage at AC initial value: 85 V Supply voltage supply with AC final value: 275 VSupply voltage with DC: 110 ... 220 VInput voltage with DC: 88 ... 350 V Input version wide-range input: YesOperating condition of backup in case of mains voltage failure: With Ue = 230 V Backup time at nominal value of the output current in case of mains voltage failure min. : 20 msOperating condition of backup for lack of mains voltage: With Ue = 230 VMains frequency 1 nominal value: 50 Hz Mains frequency 2 nominal value: 60 Hz Mains frequency: 47 ... 63 HzInput current at rated value of 120 V input voltage: 4.6 A Input current at rated value of 230 V input voltage: 2 .5 A Current limitation of the inrush current at 25 °C max.: 20 AI2t value max.: 5 A²·sProtection design: Yesdel mains cable: Magnetothermal switch recommended for single-phase operation: 10 Acharacteristic C; required for two-phase operation: circuit breaker with two-pole coupling or circuit breaker3RV2711-1HD10(UL 489) with 120 V or 3RV2711-1ED10 (UL 489) with 230 V

Read more less

SIEMENS SIMATIC HMI KTP700 BASIC 6AV21232GB030AX0 Basic Panel, key/touch operation, 7" TFT display, 65536 colours, PROFINET interface, configurable from WinCC Basic V13/STEP 7 Basic V13, includes open source software, provided free of charge see the attached CD General information: Product type designation KTP700 Basic color PN Display Display design TFT display Widescreen, LED backlightScreen diagonal 7 inDisplay width 154.1 mmDisplay height 85.9 mmNumber of colors 65 536 Supply voltage Type of supply voltage DCRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8 V Input current Current consumption (nominal value) 230 mACurrent pulse on insertion I²t 0.2 A²·s Power dissipated Active power absorbed, typ. 5.5 W

Read more less

SIEMENS SIMATIC HMI TP900 6AV21240JC010AX0 Comfort Panel, touch operation, 9" widescreen TFT display, 16 million colours, PROFINET interface, MPI/PROFIBUS DP interface, 12 MB configuration memory, Windows CE 6.0, configurable from WinCC Comfort V11  General information Product type designation: TP900 Comfort Display Display design: TFTScreen diagonal: 9 inDisplay width: 195 mmDisplay height: 117 mmNumber of colours: 16 777 216 Resolution (pixels)● Horizontal image resolution 800 pixels● Vertical image resolution 480 pixels Backlight● MTBF of backlight (at 25 °C) 80 000 h● Backlight dimmable Yes; 0-100 % Mounting typeVertical installation positionDirect / wall mounting NoVertical mounting possible (portrait format) YesHorizontal mounting possible (landscape format) ) YesMaximum inclination angle allowed without forced ventilation 35° Supply voltageType of supply voltage DCRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8V

Read more less

Siemens Door lock rotary extended control  3VA96870FK21 Product brand: SENTRONProduct name: AccessoriesProduct design: Door-coupling rotary operating mechanismAccessories: Door-coupling rotary operating mechanismDegree of protection: IP IP65

Read more less

SIEMENS SIMATIC HMI 6AV21232DB030AX0 SIPLUS HMI KTP400 Basic Color PN -20...+60°C with Conformal Coating based on 6AV2123-2DB03-0AX0 . "4" TFT display, 65536 colours" PROFINET interface SIMATIC HMI Basic Panel 2nd Generation - the beauty of simplicity! The Basic Panels are designed for the economical implementation of simple visualization tasks in the vicinity of the machines. Their basic equipment and functionality, as well as a particularly attractive price, make them the perfect entry-level equipment for small machines and systems. Thus they are perfectly coordinated with the S7-1200 Basic Controllers SIMATIC. You can choose between widescreen displays with a diagonal of 4", 7", 9" or 12" available with combined key or touch operation and which already support gesture control. The innovative high-resolution luminaires with 64,000 colors can also be installed vertically and are particularly flexible with brightness dimmable up to 100%. A multiplicity of possibilities is offered by the innovative user interface with improved usability thanks to new graphics and new controls. The new USB interface allows the connection of a keyboard, mouse or barcode reader and supports simple archiving as well as saving and restoring all data directly from the panel to/from a USB stick. For particularly complex tasks in harsh environmental conditions, SIPLUS extreme equipment is the optimal solution. The Conformal Coating protects the inside of the Panel even with 100% relative humidity, condensation, active substances and harmful gases. General Information Product type designation: KTP400 Basic Display Display design: Widescreen TFT display, LED backlightScreen diagonal: 4.3 inDisplay width: 95 mmDisplay height: 53.9 mmNumber of colors : 65 536 Horizontal image resolution 480 pixelsVertical image resolution 272 pixelsMTBF of backlight (at 25 °C) 20 000 hBacklight dimmable Yes Control elements Number of function keys: 4Number of function keys with LED: 0Keys with LED: NoSystem keys: NoNumeric keypad: Yes; Onscreen KeyboardAlphanumeric keyboard: Yes; Onscreen KeyboardRunning as touchscreen: Yes; analog-resistive Supply voltage Type of supply voltage: DCRated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28 ,8 V Input current Current consumption (nominal value): 125 mACurrent pulse on insertion: I²t 0.2 A²·s

Read more less

SIEMENS SIMATIC S7-1200 6ES72314HF320XB0 Analog input unit, SM 1231, 8 AI, +/-10 V, +/-5 V, +/- 2.5V, or 0-20mA/4-20mA, 12 bit+ sign or (13 Bit ADC) . General informationProduct type designation: SM 1231, AI 8x 13 bit Supply voltage Rated value (DC): 24 VInput current Current consumption, typ.: 60 mAfrom backplane bus DC 5 V , typ.: 90 mA Power dissipated Power dissipation, typ.: 1.5 W

Read more less

Siemens sinamics control unit 6SL30401MA010AA0 Control Unit PN without CompactFlash Card Digital inputsDigital inputsNumber:12Voltage:-3 ... 30 VLow level:-3 ... 5 V High level:15 ... 30 VCurrent consumption at DC 24 V, typical:3.5 mADelay time L→H, typ. : 50 μsH→L delay time, typ. :150 μs As output Permanent short-circuit proof: YesVoltage: DC 24 VLoad current per digital output, max.: 500 mADelay time L→H, typ./ max.: 150 μs / 400 μsH→L delay time, typ./ max.: 75 μs / 100 μs Electrical data Electronics power supply: 24 V DC (20.4 ... 28.8 V)Current consumption, max. :1.0 APower dissipation, max.: 24 WProtection, max.: 20 A

Read more less

SIEMENS SIMATIC S7-1500 6ES75317QD000AB0 AI 4xU/I/RTD/TC ST analog input module, 16 bit resolution, 0.3% accuracy, 4 channels in groups of 4, 2 channels for RTD measurement, common mode voltage 10V; diagnostics; process interrupt; delivery including a push-in front connector, power supply element, display bracket, and display clamp. General informationProduct type designation: AI 4 x U/I/RTD/TC STHardware version: From FS01Firmware version: V1 .0.0Possible FW update: Yes Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesInput current Current consumption, max: 165 mA Power Active power consumption, typ.: 2.3 W

Read more less

SIEMENS SIMATIC S7-1500F 6ES75163FN020AB0 CPU 1516F-3 PN/DP, central processing unit with work memory of 1.5 MB for program and 5 MB for data, 1st interface: PROFINET IRT with 2-port switch, 2nd interface: PROFINET RT, 3rd interface: PROFIBUS , 10 ns bit performance, SIMATIC Memory Card required . General informationProduct type designation: CPU 1516F-3 PN/DPHardware version: FS01Firmware version: V2.9Product function ● I&M data: Yes; I&M0 ... I&M3● Isochronous operation: Yes; Decentrally and centrally; with min. OB 6 x cycle of 375 µs (decentrally) and 1 ms (centrally)  Engineering with● STEP 7 TIA Portal configurable/integrated from version: V17 (FW V2.9) / V16 (FW V2.8) or superior; with previous versions of TIA Portal configurable as 6ES7516-3FN01-0AB0 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Input current Current consumption (nominal value): 0.85 ACurrent consumption, max.: 1.1 ACurrent d insertion, max.: 2.4 A; Nominal valueI²t: 0.02 A²·s Power dissipation Power dissipation, typ.: 7 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES71556BA010CN0 PROFIBUS IM bundle, IM 155-6DP HF, max. 32 peripheral modules and 16 ET 200AL modules, Multi Hot Swap, the Bundle includes: interface module (6ES7155-6BU01-0CN0), Server module (6ES7193-6PA00-0AA0), PROFIBUS connector (6ES7972-0BB70-0XA0. General informationProduct type designation: IM 155-6 DP HFHardware version: From FS02Firmware version: V4.2Possible FW update: Yes Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesShort-circuit protection: YesMains/voltage interruption buffering time: 10 msInput current Current consumption, max .: 335 mAInrush current, max.: 1.6 AI²t: 0.038 A²·s Power Active power consumption, typ.: 1.5 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES71556AU010CN0 PROFINET, 2-port interface module IM 155-6PN/2 High Feature, 1 slot for BusAdapter, max. 64 I/O modules and 16 ET 200AL modules, S2 redundancy, multi hot swap, 0.25 ms, isochronous operation, optional PN strain relief, incl. server module. General informationProduct type designation: IM 155-6 PN/2 HFHardware version: From FS02Firmware version: V4.2● Possible FW update: Yes Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Short circuit protection: YES Input current Current consumption, max.: 700 mAInrush current, max.: 4.5 AI²t: 0.25 A²·s   Power dissipated Power dissipation, typ.: 2.4 W

Read more less

SIEMENS SIMATIC S7-1200 6ES72231BL320XB0 Digital I/O SM 1223, 16DI/16DO, 16DI DC 24V, Sink/Source, 16DO, Transistor 0.5A . General informationProduct type designation: SM 1223, DI 16x24 VDC, DQ 16x24 VDC Supply voltage Rated value (DC): 24 V Allowable range, lower limit (DC): 19.2 V Allowable range, upper limit (DC): 28.8 V Input current from backplane bus DC 5 V, max..: 185 mADigital inputs from load voltage L+ (without load), max.: 4 but; per channel Power Active power absorbed, tip: 4.5 W

Read more less

SIEMENS SIMATIC DP (DC 24V - 0.4 A) 6ES71366AA000CA1 ET 200SP electronics module, F-AI 4xI0(4)..20mA HF fail-safe analog inputs up to PL e (ISO 13849) up to SIL 3 (IEC 61508) General informationProduct type designation: F-AI 4xI 0(4)..20mA 2-/4-wire HFPossible FW update; YesUsable BaseUnits: BU type A0, A1Color code for module-specific color coding label:CC00 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection: YesVoltage supply required according to NEC class 2: NoInput current Current consumption (nominal value): 0.38 ACurrent consumption, max.: 0.4 A Power dissipation Power dissipation, typ.: 2 W

Read more less