INDUSTRIAL AUTOMATION

FINDER SWITCHING POWER SUPPLY 50W 12VDC (4.5A) CHARGE. 785012301202 Type 78.50 low profile, high efficiency, modular switching power supply with 12 V DC output at 50 W for electrical panels.It features an adjustable voltage between 12 and 14V and ZVS technology. Features: High efficiency (up to 91%) Low stand-by consumption ( Internal thermal protection, with output shutdown Short circuit protection: Hiccup mode (automatic recovery) Overvoltage protection: Varistor Flyback circuit type ZVS (Zero-voltage-switching) technology, in a quasi-resonant way Complies with EN 60950-1 and EN 61204-3 standards Parallel connection for automatic redundancy: with OR-IN diode Dual and series connection Small dimensions: 70 mm (4 modules) wide, 61 mm deep Suitable for mounting on 35 mm rail (EN 60715) ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, shuttersCranesControl panels, distributionPump control panels

Read more less

Siemens 8WH20000AG00feed-through terminals with spring terminal, cross section: 0.5 ... 4 mm2, width: 6.2 mm, colour: gray Connection technology with combinable terminals for various industrial applications and modern installation technique by Siemens. You can decide whether to use the screw, spring, push-in or quick connection techniques: all connection techniques can be freely combined with each other. The registration and test accessories are standardized and usable across the board. With the combinable terminals of Siemens many applications can be realized in industrial, functional and residential buildings. The right connection technology for every need is thus available! The combinable terminals Siemens are characterized above all by the following features: 1. Safe and durable contact. 2. Easy to untie electrical connections such as cables and conductors. 3. Creation of a variety of applications. 4. Convenient and simple mounting technique and connection technique. 5. Wide range of standardized accessories. 6. Reliable safety during installation thanks to touch protection as standard. 7. Optimal technique for your safety - only from Siemens. &DPMD_ACC602_001_000_1001316&

Read more less

Omron F3SG4SRB092085 Safety Light Curtain, F3SG-SRB Standard, Type 4, 85mm Resolution, 0.3 to 20.0m Range, 920mm Height, PNP/NPN

Read more less

Pizzato Elettrica CS AR-01V1202NO+1NC safety module, category 4, for emergency stops, limit switch control for mobile guards and magnetic safety sensors. Housing in polyamide PA 66, self-extinguishing V0 according to UL 94. Terminals: Screw terminals. Power supply: 120 Vac

Read more less

Finder PLC programmable logic -opta plus verses 8A0490248310 Programmable Logic Relay (PLR) with 8 inputs and 4 outputs. Programmable both with traditional languages ​​(Ladder, FBD, etc.) and with an innovative and open source language (IDE /ARDUINO). Equipped with USB (Type-C port) for programming, data logging and power supply during programming. Available in Lite, Plus, Advanced versions. Opta - Programmable Logic Relay, PLR, 4 outputs, 10 A, DC power supply type, nominal supply voltage 24 V, operation from 10.2 to 27.6 V, Number of inputs: 8 digital/analog inputs, NO contacts (SPST ) - EMR, PLUS version, Modbus RS485, RJ45 and USB port (type C port), ambient temperature from -20 to +55 °C Technical characteristics:DC operating range: 10.2...27.6 VContact configuration: 4 NOConnect: PLUS version, Modbus RS485, RJ45 and USB port (type C port)Nominal contact current: 10 ADimensions: 70x84x56.8 mmProgramming languages: Arduino via IDE, as option IEC-61131-3 (LD - SFC - FBD - ST - IL)Nominal voltage: 24 VAmbient temperature: -20...55 °CNominal contact voltage: 250 V ACType of power supply: DC type of power supply

Read more less

Finder mini relay for printed circuit and plug-in 16A 406190120000 The Type 40.61 mini relay is a device for mounting on PCB or 95 series sockets. Features: 1 Exchange 5.0 mm pitch Terminal length 3.5 mm for PCB mounting Terminal length 5.3 mm for plug-in relay DC coil (650 mW or 500 mW) Compliance with the glow wire test according to EN 60335-1 Protection category:– RT II – flux-proof (Standard)– RT III – washable (Special version)

Read more less

Pizzato Elettrica FL 2183Cable safety switch with reset for emergency stops. Metal housing, three PG 13.5 threaded cable entries. Degree of protection: IP67 according to EN 60529. Contact block: 3NC slow action. Positive opening: Yes

Read more less

Schneider Electric XPSUAT33A3AP The product is part of the XPS Universal range of safety relays. It is designed for monitoring emergency stops, safety, magnetic or proximity switches, PNP and NPN sensors, RFID safety switches, safety barriers, and sensitive mats/edges. The safety module is powered by 48-240V AC/DC and equipped with a screw-on terminal. It can transmit more than 40 different status messages from the output of the module to a standard digital input of a PLC, reducing downtime and indicating the cause of the production stoppage. The safety relay includes 2 positive and 1 negative safety inputs, 4 configurable pulse outputs ON/OFF, 3 immediate NO safety outputs, 3 configurable NOs, 1 configurable NC and 2 diagnostic outputs.  The maximum level of safety achieved by this safety module is PLe/Category 4 according to ISO 13849-1, SILCL 3 according to IEC 62061, SIL 3 according to IEC 61508. The safety module has a weight of 0.350 kg. Dimensions: 45 mm (width) x 120 mm (depth) x 100 mm (height).  These safety modules are suitable for applications in food, lifting, material handling, material processing, packaging and are designed for a wide range of industrial machines. The safety module complies with IEC 60947-5-1, IEC 61508-1, IEC 61508-2, IEC 61508-3, ISO 13849-1, IEC 62061, IEC 60947-5-1, IEC 61508-1, IEC 61508-2, IEC 61508-3, ISO 13849-1, IEC 62061, and is cULus and TUV certified. The module is mounted on a symmetrical 35 mm DIN rail. Preventa XPS Universal safety relays are the first choice for easily managing safety functions, typically for simple to medium complexity machines.

Read more less

Ilme CK 03 Iflush-mounting enclosures with lever

Read more less

Tese Italy XS7E1A1PAM8 The flat XS inductive proximity sensor (26 x 26 x 13 mm) Schneider Electric has a PBT body, a sensing distance of 10 mm, PNP output with NO function and an M8 connector. It has a power supply voltage of 12 to 24 Vdc. This general purpose inductive proximity sensor can be mounted directly to a surface, thanks to its 4 screw mounting points and is C-Tick, ECOLAB, CSA, UL certified.

Read more less

Pizzato Elettrica NA B110BB-DMKMetal case, painted with oven-baked UV-resistant powder. Version with integrated cable, standard length 2 metres. Maximum operating frequency 3600 operation cycles/hour. Mounting position: any. Version with M12 connector from the right.

Read more less

Lovato SRBES20 Monitoring relay for safety circuits type/model Lovato Electric SRBES20 - 2NO SAFETY MODULE

Read more less

Schneider Electric ZB4BA335The black Harmony XB4 button head from Schneider Electric works with a pulse mechanism and has a chrome-plated metal ring. It is marked with the down arrow symbol. This push button head provides an ergonomic interface for controlling machines. It can be easily installed and replaced on complete button units compatible with buttons and contact elements by snap-fitting. It is shockproof, dustproof and water resistant, thanks to IP66/IP67/IP69/IP69K protection ratings which make it ideal for use in harsh environments.

Read more less

Legrand 642306COMPACT 310 VA isolation and safety transformer. Primary: 230/400Vac Secondary: 12 V - 0 - 12 V / 0 - 12 - 24 Vac Single phase. IEC EN 61558-2-6 standard

Read more less

Schneider Electric NSYS3D8640PSpacial 3D sheet metal box with solid door and equipped with solid bottom plate, suitable for the creation of electrical automation, control, command and regulation panels in all industrial environments and in particularly in difficult environments such as the chemical and petrochemical industries, agri-food, cement factories, textile industries, steel industry, shipyards, ports, telecommunications, telephone networks, water purification stations, public lighting. External covering based on structured polyester. Monobloc body with cross structure, double thickness sheet metal front profile, drip-shaped. Flat bottom. Easily removable and reversible door, with a 20m return in double thickness sheet metal which gives an excellent degree of rigidity, 120° opening.

Read more less

Tese Italy XS618B1PAL2The cylindrical inductive proximity sensor (M18) Schneider Electric OsiSense It has a sensing distance of 8 mm, PNP output with NO function and is pre-wired (2 m cable). It has a power supply voltage of 12 to 48 Vdc. This general purpose threaded inductive cylindrical proximity sensor is flush mountable and has a wider sensing range. It is mountable directly to a surface or bracket, thanks to the external thread and double nuts and is CSA UL certified.

Read more less

Ilme CKF 03with female contacts

Read more less

Omron E2BM18KS08WPB12MLITE, inductive, nickel-brass, short body, M18, shielded, 8mm, DC, 3-wire, PNP-NO, 2m cable

Read more less

Siemens 3RV20111HA10 circuit breaker size S00 for motor protection, CLASS 10 release A 5.5...8 A release N 104 A screw terminal standard switching power SIRIUS 3RV2 circuit breaker For motor protection for safe disconnection in the event of a short circuit and for overload protection of consumers and the system as well as for the safe separation of the system from the mains.\nThe compact and tropicalized circuit breakers are optimized, thanks to their low thermal dispersion, for use in feeders, naturally also for motors IE3/IE4 and equally for DC switching. International approvals (e.g. IEC and UL/CSA) and versions for applications in potentially explosive areas (ATEX or IEC Ex) are obviously available.\nDevice variants for motor protection are available (also with overload relay function ), system protection, short-circuit protection of combined starters, transformer protection. as a main and EMERGENCY STOP switch and for use in IT networks. They are available with screw or spring-loaded terminals for quick, maintenance-free and vibration-resistant connection as well as optionally with a built-in auxiliary switch block.\nAll accessories such as e.g. auxiliary contact blocks, auxiliary releases, signaling contact blocks etc. they are uniformly suitable for all construction sizes. The various power supply options, such as the SIRIUS 3RV29 power supply system, significantly reduce the wiring of the main circuit.\nThe 3RV2 circuit breakers replace the proven 3RV1 series.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Schneider Electric NSYCR55WU2Anti-condensation heater in extruded aluminium, surface temperature limited to 75°C with ambient temperature -5°C. It must be equipped with a thermal regulation thermostat to control the temperature and humidity inside the cabinet. Resistor supplied with connection terminal block.

Read more less

Ilme CKM 03with male contacts

Read more less

Siemens 6ED10522MD080BA1LOGO! 12/24RCEO, logic module, PS/I/O: 12/DC 24 V/relay, 8 DI (4 AI)/4 DO, without display, 400 block memory, Ethernet modularity and expandability, integrated Web Server, data log , customized web pages, standard microSD card for LOGO! SOFT Comfort from V8.3, previous projects executable, cloud connection in all LOGO! basic devices 8.3 The LOGO! basic devices 8 with 8 digital inputs and 4 digital outputs and their reduced installation width of only 72 mm, have many well-known functions (current impulse relay, staircase light automation, auxiliary contactor, time relay, etc.) already integrated and freely combinable with each other. The control programs are easily created and simulated on a PC. The respective integrated Ethernet interface allows communication with up to nine LOGO! modules. 8 or SIMATIC S7 systems. With the Web Server, also integrated, the connected users can be monitored and controlled via WLAN or Internet. The user himself can configure web pages, even if he has no knowledge of HTML. Using additional modules, GSM or GPS communication can be implemented as well as integration into a building control system. The LOGO! basic modules 8 are available with and without display for different input voltages as well as with transistor or relay outputs (up to 10 A nominal). Expandable with additional modules up to 24 DI / 20 DQ (8 AI / 8 AQ). Integrated cloud communication. LOGO! 8 can also be expanded with an external Text Display for significant messages in plain text. The backlight color is selectable for optical highlights. Different LOGOs are also available! Power Module for power supply.

Read more less

Tese Italy XS118B3PAM12The cylindrical inductive sensor It has a sensing distance of 8 mm, PNP output with NO function and an M12 connector. It has a power supply voltage of 12 to 24 Vdc. This general purpose threaded inductive cylindrical proximity sensor is flush mountable and has a wider sensing range. It can be mounted directly on a surface or on a bracket, thanks to the external thread and double nuts and is E2, CSA, UL certified.

Read more less

Siemens 3NW7131SENTRON, fuse holder for cylindrical cartridges, 14x51 mm, 3-pole, In: 50 A, Un AC: 690 V &DPMD_ACC602_001_000_1004330&

Read more less