INDUSTRIAL AUTOMATION

SIMATIC ET 200SP 6ES71316BF000CA0 Digital input module, DI 8x DC 24V High Feature, Input type 3 (IEC 61131), Sink Input, (PNP, read on P), Packaging unit: 1 piece suitable for BU type A0, Color code CC01 , Input delay 0.05..20ms; Channel diagnostics for: short circuit in encoder supply, wire break, supply voltage, channel error LED . General informationProduct type designation: DI 8x24 VDC HFHardware version: From FS07Possible FW update: YesUsable BaseUnits: BU type A0Color code for module-specific color coding label:CC01 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Power dissipated Power dissipation, typ.: 1.5 W; 24 V, 8 inputs powered by transducer power supply

Read more less

SIEMENS SIMATIC ET 200SP 6ES71346JD000CA1 Analog input module, AI 4xRTD/TC High Feature, suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16Bit, +/- 0.1%, 2-/3-/4-Wire . General informationProduct type designation: AI 4xRTD/TC 2-/3-/4-wire HFFirmware version: V2.1 ● Possible FW update: YesUsable BaseUnits: BU type A0, A1Color code for module-specific color coding label: CC00Product function● I&M data: Yes; I&M0 ... I&M3● Isochronous operation: No● Measuring range adaptation: YesEngineering with● STEP 7 TIA Portal configurable/integrated from version: V12 SP1 / V13● STEP 7 configurable/integrated as of version: V5.5 SP3 / V5.5 SP4● PCS 7 configurable/integrated as of version: V8.1 SP1● PROFIBUS as of GSD version/GSD revision : GSD revision 5● PROFINET from GSD version/GSD revision: GSDML V2.3 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Input current Current consumption (nominal value): 450 mACurrent consumption, max.: 550 mAInrush current, max.: 3.7 AI²t: 0.09 A²·s Power dissipated Power dissipation, typ.: 0.75 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES71346HB000CA1 Analog input module, AI 2x U/I 2-,4-Wire High Feat., suitable for BU type A0, A1, Color code CC05, channel diagnostics, 16 bit, +/- 0.1%. General informationProduct type designation: AI 2 x U/I 2-/4-wire HFHardware version: from FS06Possible FW update: Yes Usable BaseUnits: BU type A0, A1Color code for module-specific color coding label: CC03 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Input current Current consumption (nominal value): 39 mA; without transducer power supply Power dissipated Power dissipation, typ.: 0.95 W; without transducer power supply

Read more less

Siemens Simatic PLC(DC 24 V - 37 MA) 6es7134 6gd01 0ba1 Analog input module, AI 4XI 2/4 wire standard, Quantity of pieces in the package 1 piece suitable for BU type A0, A1, Color code CC03, Diagnostic module, 16 bit, +/-0.3% General informationProduct type designation: AI 4xI 2-/4-wire STHardware version: From FS02Possible FW update: YesUsable BaseUnits: BU type A0, A1Color code for module-specific color coding label: CC03 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesInput current Current consumption, max.: 37 mA; without power supply to the transducers Power dissipation Power dissipation, typ.: 0.85 W; without transducer supply voltage

Read more less

SIEMENS SIMATIC ET 200SP 6ES71346GB000BA1 SIMATIC ET 200SP, Analog input module, AI 2xI 2-/4-Wire Standard, Quantity in packaging 1 piece suitable for BU type A0, A1, Color code CC05, Diagnostics module, 16 bit . General information Product type designation AI 2xI 2/4-wire STHardware version from FS04Firmware version● FW update possible YesUsable BaseUnits BU type A0 , A1Color code for module-specific color coding plate CC05 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Input current Current consumption, max. 45mA; without transducer power supply Power dissipated Power dissipation, typ. 1.1 W  

Read more less

SIEMENS SIRIUS 3RV2 Circuit breaker 3RV20111DA10 Automatic circuit breaker size S00 for motor protection, CLASS 10 release A 2,2...3,2 A release N 42 A screw terminal standard operating power. General information product brand SIRIUSproduct designation Circuit breakerproduct design For motor protectionproduct type designation 3RV2   General technical data frame size of circuit breaker S00frame size of company-specific combinable contactor S00, S0product expansion auxiliary switch block Yes power loss [W] at rated current value● with AC in hot operating state 7.25 W● with AC in hot operating state per pole 2.4 Wvoltage insulation with pollution degree 3 with AC rated value 690 Vimpulse withstand voltage rated value 6 kVshock resistance according to IEC 60068-2-27 25g / 11 ms mechanical lifespan (operating cycles)● of the main contacts typ. 100 000● of auxiliary contacts typ. 100 000electrical lifespan (switching cycles) typ. 100 000type of explosion protection according to the ATEX Product Directive 2014/34/EU Ex II(2) GDcertificate of suitability according to the ATEX Product Directive 2014/34/EU DMT 02 ATEX F 001reference code according to IEC 81346-2:2009 QRoHS Directive (date) 10/01/2009    

Read more less

SCHNEIDER ELECTRIC UAF 24V M.SCREW safety moduleXPSUAF13AP The product is part of the XPS Universal security module range. It is designed for monitoring emergency stops, safety, magnetic or proximity switches, PNP sensors, RFID safety switches and safety barriers. The safety module is powered by 24V AC/DC and equipped with an extractable screw terminal. It can transmit more than 40 different status messages from the module output to a standard digital input of a PLC, reducing machine downtime and indicating the cause of the production stoppage. The safety module includes 2 safety inputs, 3 configurable ON/OFF pulse outputs, 3 NO safety outputs and 1 diagnostic output with complete status information. The maximum safety level achieved by this safety module is PLe/Category 4 compliant with ISO 13849-1, SILC L 3 compliant with IEC 62061 and SIL 3 compliant with IEC 61508. The safety module has a weight of 0.200 kg. Dimensions: 22.5mm (width) x 120mm (depth) x 100mm (height). These safety modules are suitable for applications in food, lifting, material handling, materials processing, packaging and are designed for a wide range of industrial machines. The safety module complies with the standards IEC 60947-5-1, IEC 61508-1, IEC 61508-2, IEC 61508-3, ISO 13849-1, IEC 62061, IEC 60947-5-1, IEC 61508 -1, IEC 61508-2, IEC 61508-3, ISO 13849-1, IEC 62061 and is cULus and TUV certified. The module is mounted on a 35 mm symmetrical DIN rail. Preventa XPS Universal safety modules are the first choice for easily managing safety functions, generally for simple to medium complexity machines. Click for a 360 degree view of XPSUAF13AP Schneider Electric

Read more less

SCHNEIDER ELECTRIC XPSMCMCP0802 The Schneider Electric XPSMCM safety controller CPU is powered by 24 VDC, has 8 digital inputs, 2 interlock inputs for start/restart, 2 output OSSD pairs, 4 test outputs and 2 status outputs and stud terminals. This configurable safety controller complies with the requirements of PL e/Category 4 according to EN/ISO 13849-1 and SILCL3 according to EN/IEC 62061. It is an appropriate solution for machines with a limited number of safety functions that require configuration flexibility of a safety controller. It can be used as a standalone or with fourteen expansion modules: the system is expandable up to 128 inputs, 16 outputs and up to 32 diagnostic status outputs, ideal for machines that require monitoring of multiple safety functions. Click for large 360 ​​view of SCHNEIDER ELECTRIC XPSMCMCP0802

Read more less

SCHNEIDER ELECTRIC 7"W TOUCH PANEL DISPLAY  HMIST6400 This Basic HMI belongs to the Harmony ST6 range of Schneider Electric. The single touch resistive HMI is made with an aluminum front panel with a multi-colored status indicator that shows the various modes of operation. This HMI has a size of 7 inches with 16 million colors and a resolution of 800 x 480 pixels (WVGA). It is configurable using EcoStruxure Operator Terminal Expert software for an intuitive user experience. It has an 800 MHz ARM Cortex-A8 CPU, 1 GB device memory, 128 MB user data memory and 512 KB backup memory. This ST6 HMI integrates 2 Ethernet ports, COM1 (RS-232C), COM2 (RS-485), 1 USB2.0 Type A and 1 USB 2.0 Micro-B port. Dimensions: 208mm (width) x 153mm (height) x 45mm (depth); weight: 0.80 Kg. It is designed for use in industries such as packaging, food and beverage, textiles, HVAC equipment and compressors, and also for end users who need to maintain their web devices. It complies with EN standards (61000-6-4, 61000-6-2, 61131-2), UL 61010-2-201, CSA C22.2 No 61010-2-201 and is CSA, CE, China RoHS, KC, REACH certified. The range is designed to meet the needs of simple machine operators by offering good visualization, connectivity, end-to-end cybersecurity thanks to EcoStruxure Secure Connect Advisor and competitive costs. The range ensures different degrees of protection: IP65F, type 1, type 4X (for internal use only), type 13 (on the front panel, if correctly installed in a cabinet). Click for large 360 ​​view of SCHNEIDER ELECTRIC HMIST6400

Read more less

SCHNEIDER ELECTRIC MODULE 8 ANALOGUE INPUTS ISOL. RTU BMXAMI0810 The high resolution analog input module is part of the Modicon X80 modules. It has 8 isolated analog inputs (15 bits + sign). This module is connected via a 28-way removable terminal block. The module offers different voltage or current ranges for each of the inputs, depending on the configuration you choose. It occupies a single slot in the rack and has an enclosure that provides 20 protection to the electronics.

Read more less

SCHNEIDER ELECTRIC Regulated switching power supply - Three phase - 400 V AC - 24 V - 20 A ABL8WPS24200 Universal stabilized switching power supply, intended for powering, in 24 V DC, the auxiliary circuits of automation systems. Compact, and with switching technology, it guarantees a high degree of stability of the output voltage and represents the ideal complement for the Modicon M340, Premium and Quantum ranges. Additional functional modules can be associated in order to guarantee continuity of service and at the same time be able to discriminate the protection of the powered systems. It guarantees an output voltage equal to the nominal value of 24 V DC ±3%, regardless of the load (from empty to full load) and for any mains supply. Compliant with IEC standards and UL, CSA and TUV approved, it is suitable for universal use. It has protections that ensure optimal operation of the control and automation system. The protection operating mode can be configured according to your specific application needs: • Manual reset protection mode: following a defect that involves a current absorption higher than the nominal value, priority will be given to the output voltage: the power supply will stop completely before the voltage supplied can drop below 21 V DC. In this way, unwanted variations in the logical states of the PLC and powered actuators will be avoided. • Automatic reset protection mode: priority is given to the current to allow, for example, fault finding, or to guarantee continuity of service until the arrival of maintenance workers. When the defect appears, the nominal current continues to be supplied but at a voltage significantly lower than the nominal one of 24 V DC. When the fault disappears the voltage returns to its nominal value. Phaseo Universal power supplies also have a power reserve that allows them to supply a current of 1.5 In at regular intervals; in this way it is possible to avoid oversizing the power supply if devices characterized by high inrush currents must be powered. The diagnostic function of Phaseo Universal power supplies is shown on the front of the product via signaling LEDs (Uout and Iout) and via a potential-free relay contact which allows remote control. All Phaseo Universal power supplies are equipped with a potentiometer for regulating the output voltage to compensate for voltage drops along long cables. Click for a 360 degree view of SCHNEIDER ELECTRIC ABL8WPS24200

Read more less

PILZ PNOZ MONITORING RELAY FOR SAFETY CIRCUITS M B0, PIZ772100 - PNOZMB0 24DC 20 INP-4 OUT EXPANDABLE. Model: Base unitType of electrical connection: Screw connectionRail mounting possible: yesRated control voltage Us DC: 24...24 VType of voltage for the drive: DCWith removable terminals: yesInput evaluation: 1-channelWith start input: yesWith muting function (Possibility of By-Pass during passage of incoming material): noNumber of outputs, contact, safety, non-delayed: 0Number of outputs, contact, safety, delayed: 0Number of outputs, semiconductor, safety, non-delayed: 4Number of outputs, semiconductor, safety, delayed: 4Number of outputs, contact, signaling, non-delayed: 0Number of outputs, contact, signaling, delayed: 0Number of outputs, semiconductor, signaling, non-delayed: 8Number of outputs, semiconductor, signaling, delayed: 0Stop category according to IEC 60204: 0 + 1Performance level according to EN ISO 13849-1: eSIL level according to IEC 61508: 3BG BIA approval: noUL approval: yesWidth: 45 mmHeight: 101.4 mmDepth: 120 mm

Read more less

PEPPERL+FUCHS TRANSMITTER POWER SUPPLY KFD2-STC4-Ex1.2O 283674 Functions: This isolating barrier is used for intrinsic safety applications. The device provides power to 2-wire and 3-wire SMART transmitters in a hazardous area and can also be used with 2-wire SMART power sources. Transfers the analog input signal to the safe area as an isolated current value. Digital signals can be superimposed on the input signal in the hazardous or safe area and are transferred in both directions. If the HART communication resistance in the loop is too low, you can use the internal 250 Ω resistor between terminals 8 and 9. Test sockets for connecting HART communication devices are integrated into the device terminals. Applications The device supports the following SMART protocols: HART BRAIN Foxboro

Read more less

Pepperl+Fuchs Switch Amplifier KFD2-SR2-Ex2.W 203355  This isolated barrier is used for intrinsically safe applications. The device transfers digital signals from NAMUR sensors or dry contacts from the hazardous area to the non-hazardous area.The proximity sensor or mechanical contact controls the control side load for an output with relay contact. The output of the device changes state when the input signal changes state.Using the switches it is possible to invert the operating mode and deactivate line fault detection.During a fault condition fault, the relay returns to the de-energized state and the LEDs indicate the fault according to NAMUR NE 44.If the device is operated via Power Rail a collective error message is also available.Isolated barrier 2-channel, 24 V DC power supply (power rail), dry contact or NAMUR inputs, relay contact output, line fault detection (LFD), reversible operating mode, up to SIL 2 (SC 3) acc. according to IEC/EN 61508, housing width: 20 mm, number of channels: 2 channels, safety integrity level (SIL): SIL 2, systematic capacitance (SC): SC 3, nominal voltage: 19 ... 30 V DC , Field device: NAMUR sensor, Field device [2]: potential-free contact, Line fault detection, Type: 2 x relay (changeover contact)Connection: power rail or 14+ terminals, 15-Rated voltage: 19 ... 30 V DCRipple: ≤ 10%Rated current: ≤ 50 mAPower dissipation: ≤ 1 WPower consumption: ≤ 1 W

Read more less

Omron NX Series, EtherCAT Coupler, 2 ports, 10A I/O power, 125 micro s refresh  NXECC203 I/O system: NX I/O busModule type: Bus couplerSIL according to IEC 61508: NoneCommunication ports: EtherCAT SlaveNumber of communication ports: 2 Degree of protection (IP): IP20Product height (unpackaged): 100 mmProduct width (unpackaged): 46 mmProduct depth (unpackaged): 80 mm Product weight (without packaging): 250 g

Read more less

DATALOGIC Datasensing S5N-PA-5-G00-XG EMITTER M12 Extended range of standard “one for all” M18 photoelectric tubular sensors All optical functions Improved EMI immunityBetter immunity to ambient lightImproved laser safety levelM18 flat plastic with universal mountingModels with short plastic caseAvailable with M18 metal case Models with stainless steel caseAxial or radial optics, cable or connectorStandard 4-wire NO-NC NPN or PNP outputM12 pigtail models availableIO-Link V1.1 connectivity with dual channelElectrical dataOperating voltage 10…30 VDCNo-load supply current ≤ 35 mALoad current ≤100 mALeakage current ≤10μALED indicators Green POWER LEDShort circuit protection YESReverse polarity protection YesInfrared LED emissionInterference to external light according to EN 60947-5- 2:2020Impulsive overvoltage protection YesInsulation resistance >20 MΩ 500 Vdc, between electronics and housingContact resistance 500 Vac 1 min., between electronics and housing

Read more less

BALLUFF BNI005H Network module for Profinet Interface: Profinet I/O Fast Start-Up (FSU): yes Operating voltage UB: 18...30.2 VDC Indicator: yes Connection ( COM 1): M12x1-Socket, 4-pin, D-coded Connection (COM 2): M12x1-Socket, 4-pin, D-coded Connection (voltage supply IN): 7/8" -Connector, 5-pin Connection (power supply OUT): 7/8"-Socket, 5-pin Slot connection: 8x M12x1-Socket, 5-pin, A-coded Digital inputs : 16x PNP, type 3 Digital outputs: 16x PNP Configurable inputs/outputs: yes Max. output current: 2 A short-circuit proof and overload-proof Summation current US, sensor: 9.0 A Summary current UA, actuator: 9.0 A Housing material: Zinc, die cast Dimensions: 68 x 37.9 x 224 mm Ambient temperature: -5...70 °C Protection rating: IP67 Additional interfaces: 8x IO-Link IO-Link version: 1.1 Port class: Type A Safety Hub Support: yes

Read more less

ALLEN-BRADLEY Digital I/O module for Rockwell Automation PLC series/model 8 CHANNEL SFTY SINKING INP MOD PN-25132 - 1734IB8S Direct current (DC) supply voltage: 10...10 V Type of supply voltage: DC Number of digital inputs: 8 Configurable digital inputs: yes Input current at signal 1: 4 mA Allowed input voltage: 10...10 V Type of input voltage: DC Short circuit protection, available on outputs: yes Type of electrical connection: Screw connection Delay time at signal change: 0.5...0.5 ms Suitable for safety functions: yes Width: 12 mm Height: 56 mm Depth: 75.5 mm

Read more less

ALLEN-BRADLEY2711PT7C22D9P Rockwell Automation Series/Model Graphic Control Panel PANELVIEW PLUS 7 GRAPHIC TERMINAL Direct current (DC) supply voltage: 18...30 VDisplay type: TFT (LCD Thin Film Transistor)Max. horizontal resolution: 640Max. vertical resolution: 480Type of supply voltage: DCNumber of industrial Ethernet hardware interfaces: 1Number of USB hardware interfaces: 3With SW interface: yesSupports DeviceNet protocol: yesSupports Ethernet / IP protocol: yesWith color display: yesNumber of display colors: 18Screen diagonal: 6 inchApplication / Backup memory: 524288 kByteWith numeric keypad: noWith alphanumeric keyboard: noWith printer output: yesFront IP protection degree: IP66Operating temperature: 0...55 °CRail mounting possible: noWall / direct mounting possible: yesWidth of the front frame: 212.09 mmHeight of the front frame: 169.926 mmRecessing depth: 69.6 mm

Read more less

ALLEN-BRADLEY PanelView Plus 7 Graphic Terminal 2711P-T15C22D9P   Direct current (DC) supply voltage: 24...24 VDisplay type: TFT (LCD Thin Film Transistor)Type of supply voltage: DCNumber of hardware interfaces Industrial Ethernet: 1Number of PROFINET hardware interfaces: 0Number of RS232 serial hardware interfaces: 0Number of RS422 serial hardware interfaces: 0Number of RS485 serial hardware interfaces: 0 Number of TTY serial hardware interfaces: 0Number of USB hardware interfaces: 2Number of parallel hardware interfaces: 0Number of Wireless HW interfaces: 0Number of other hardware interfaces: 0 With SW interface: yesSupports TCP / IP protocol: noSupports PROFIBUS protocol: noSupports CAN protocol: noSupports INTERBUS protocol: noSupports ASI protocol: no Supports EIB/KNX protocol: noSupports MODBUS protocol: noSupports Data-Highway protocol: noSupports DeviceNet protocol: noSupports SUCONET protocol: noSupports LON protocol: noSupports PROFINET IO protocol: noSupports PROFINET CBA protocol: noSupports SERCOS protocol: noSupports Foundation Fieldbus protocol: noSupports Ethernet / IP protocol: yesSupports AS protocol -Interface Safety at work: noSupports DeviceNet Safety protocol: noSupports INTERBUS-Safety protocol: noSupports PROFIsafe protocol: noSupports SafetyBUS p protocol: noSupports protocols for others bus systems: noWith color display: yesNumber of display colours: 262144Screen diagonal: 15 inchWith numeric keypad: noWith alphanumeric keyboard: noFront IP protection degree: IP66Operating temperature: 0...55 °CPossibility of rail mounting: noPossibility of wall / direct mounting: yesFrame width front: 381 mmHeight of the front frame: 318 mmRecessing depth: 69.6 mm

Read more less

ALLEN-BRADLEY Graphic control panel type/model Rockwell Automation 2711P-T12W22D9P - PANELVIEW PLUS 7 GRAPHIC TERMINAL Screen diagonal: 12.1 inchDisplay type: TFT (LCD Thin Film Transistor)With color display: yesNumber of display colors: 262144Front IP protection rating : IP66Supply voltage type: DCSupports TCP / IP protocol: noSupports PROFIBUS protocol: noSupports CAN protocol: noSupports MODBUS protocol: noSupports PROFINET IO protocol: noSupports Ethernet / IP protocol: yesSupports PROFIsafe protocol: noDirect current (DC) supply voltage: 24...24 VNumber of Ethernet hardware interfaces industrial: 1Number of PROFINET hardware interfaces: 0Number of RS232 serial hardware interfaces: 0Number of RS422 serial hardware interfaces: 0Number of RS485 serial hardware interfaces: 0Number of TTY serial hardware interfaces: 0Number of USB hardware interfaces: 2Number of parallel hardware interfaces: 0Number of Wireless HW interfaces: 0Number of other hardware interfaces: 0With SW interface: yesSupports INTERBUS protocol: noSupports ASI protocol: noSupports EIB/KNX protocol: noSupports Data-Highway protocol: noSupports DeviceNet protocol: noSupports SUCONET protocol: noSupports LON protocol: noSupports PROFINET CBA protocol: noSupports SERCOS protocol: noSupports Foundation Fieldbus protocol: noSupports AS-Interface Safety at protocol work: noSupports DeviceNet Safety protocol: noSupports INTERBUS-Safety protocol: noSupports SafetyBUS p protocol: noSupports protocols for other bus systems: noWith numeric keypad: no With alphanumeric keypad: noOperating temperature: 0...55 °CPossibility of rail mounting: noPossibility of wall / direct mounting: yesFrame width front: 340 mmHeight of the front frame: 240 mmRecessing depth: 69.6 mm

Read more less

ALLEN-BRADLEY2711PT10C22D9PA Graphic control panel type/model Rockwell Automation 2711P-T10C22D9P - PANELVIEW PLUS 7 GRAPHIC TERMINAL Screen diagonal: 10.4 inchDisplay type: TFT (LCD Thin Film Transistor)With color display: yesNumber of display colors: 262144Front IP protection rating : IP66Supply voltage type: DCSupports TCP / IP protocol: noSupports PROFIBUS protocol: noSupports CAN protocol: noSupports MODBUS protocol: noSupports PROFINET IO protocol: noSupports Ethernet / IP protocol: yesSupports PROFIsafe protocol: noDirect current (DC) supply voltage: 24...24 VNumber of Ethernet hardware interfaces industrial: 1Number of PROFINET hardware interfaces: 0Number of RS232 serial hardware interfaces: 0Number of RS422 serial hardware interfaces: 0Number of RS485 serial hardware interfaces: 0Number of TTY serial hardware interfaces: 0Number of USB hardware interfaces: 2Number of parallel hardware interfaces: 0Number of Wireless HW interfaces: 0Number of other hardware interfaces: 0With SW interface: yesSupports INTERBUS protocol: noSupports ASI protocol: noSupports EIB/KNX protocol: noSupports Data-Highway protocol: noSupports DeviceNet protocol: noSupports SUCONET protocol: noSupports LON protocol: noSupports PROFINET CBA protocol: noSupports SERCOS protocol: noSupports Foundation Fieldbus protocol: noSupports AS-Interface Safety at protocol work: noSupports DeviceNet Safety protocol: noSupports INTERBUS-Safety protocol: noSupports SafetyBUS p protocol: noSupports protocols for other bus systems: noWith numeric keypad: no With alphanumeric keyboard: noOperating temperature: 0...55 °CPossibility of rail mounting: noPossibility of wall / direct mounting: yesFrame width front: 297 mmHeight of the front frame: 252 mmRecessing depth: 69.6 mm

Read more less

Allen-Bradley PowerFlex 525 series/model frequency converter 075KW (1HP) AC drive Mains voltage: 380...480 VMaximum output frequency: 500 HzNominal output current I2N: 2.3 AProtection degree (IP): IP20Operation frequency mains: 50/60 HzNumber of input phases: 3Number of output phases: 3Maximum output voltage: 480 VNumber of analogue inputs: 2Number of digital outputs: 2Number of digital inputs: 7With control unit: yesSuitable for use in the industrial sector: yesSuitable for use in the commercial/domestic sector: yesSupports TCP / IP protocol: noSupports PROFIBUS protocol: yesSupports CAN protocol: noSupports INTERBUS protocol: noSupports ASI protocol: noSupports EIB/KNX protocol: noSupports MODBUS protocol: yesSupports Data-Highway protocol: noSupports DeviceNet protocol: yesSupports SUCONET protocol: noSupports LON protocol: noSupports PROFINET IO protocol : noSupports PROFINET CBA protocol: noSupports SERCOS protocol: noSupports Foundation Fieldbus protocol: noSupports Ethernet / IP protocol: yesSupports AS-Interface Safety at work protocol: noSupports DeviceNet Safety protocol: noSupports INTERBUS-Safety protocol: noSupports PROFIsafe protocol: noSupports SafetyBUS p protocol: noSupports protocol for BACnet: noSupports protocols for other bus systems: yesWith optical interface: noWith PC connection: yesIntegrated braking resistor: no4-quadrant operation option: noHeight: 152 mmWidth: 72 mmDepth: 172 mm

Read more less

ALLEN-BRADLEY 2198P070 Accessories and spare parts for Rockwell Automation frequency converter series/model KINETIX 5700 DC BUS SUPPLY  ConstructionHeight 358 mmWidth 55 mmDepth 250 mmElectricalControl power DC input current 0.8 AInternal shunt power 75 W Capacitive power consumption 172 JInternal shunt resistance 37.5 OhmInternal capacitance 780 µFRated output power 151 W at 100%DC output continuous current to bus 25.5 A, 3-phasePeak bus output current 70.3 A, 3-phaseMain AC input current 27.0 A at 324...524 V rms, 3-phasePeak AC input current 74.3 A at 324...524 V rms, three phaseControl supply current 4 A at 24 V inrush currentContinuous output power to bus 8.5 kW at 240 V rms nominal, three-phase at 1/2 power, 17.0 kW at 480 V rms nominal, three-phase.Peak output power to the bus 23 kW at 240 V rms nominal, three-phase at 1/2 power, 46 kW at 480 V rms nominal, three phase.Line loss for 20 msEfficiency 99%AC input frequency 47 HzControl power DC input voltage 24 V DC (±10%)Voltage bus output nominal 458...747 V DCInrush, max 33 A (zero to peak)Bus surge voltage 832 V DC to 480 V, AC input nominalAC input voltage 195.. .528V rms 3-phase (240/480V nom)Shunt on 775V plus 30V x bus regulator capacity/usageShunt 765V plus 30V x bus regulator capacity/usageMechanicalWeight 4.42 kg

Read more less