Allen-bradley terminal base 1734TOP Rockwell Automation one-piece I/O point clamp base with screw clamp. Type of accessories I/O modulesDimensions 49 x 12 x 168 mm Product detailsGeneral specifications Attribute ValueTerminal Base 1734-TB or 1734-TBS Wiring Base AssemblyTerminal Base Screw Torque Determined by Installed Terminal BlockLocation of key switch 4POINTBus current, max 75 mA Power dissipation, max 1.86 W at 750 Ω on each output2.15 W at 0 Ω on each outputThermal dissipation, max @ 28.8 V DC 6.34 BTU/hour at 750 Ω load on each output7.33 BTU/hour at 0 Ω load on each channel 50 V isolation voltage, tested at 1500 V AC for 60 s, outputs and field power to system No isolation between individual outputs or outputs to field powerSupply voltage, backplane 5 V DCSupply voltage range, input field power10… 28.8 VDC (includes 5% AC ripple), 220 mA, Class 2Output Current 4…20 mA or 0…20 mAExternal DC Supply Current, nom 110 mA at 24 VDC (including 20 mA output) Dimensions (HxWxD), approx. 56.0 x 12.0 x 75.5 mm (2.21 x 0.47 x 2.97 inches)Weight, approx. 36.9 g (1.3 oz) Wiring category(1) (2) 2 – on signal ports1 – on power ports Wire Size 0.25 to 2.5 mm2 (23...13 AWG) solid or stranded copper wire rated100 °C (212 °F) or greater, insulation maximum 1.2 mm (3/64 inch)

Read more less

Siemens simatic ET 200SP HA 6DL11936TP000DH1 SIMATIC ET 200SP HA, terminal block, type H1, 32 push-in terminals, internal comparison temperature load group new, width: 22.5mm. General informationProduct type designation Type H1Product function● I&M data Yes; Asset dataSupply voltageRated value (DC) 24 VExternal protection of power cables Yes; DC 24 V / 10 A (thermal-magnetic switch with tripping characteristictype B or C, fast-acting equipment protection fuse with sufficientinterrupting capacity, electronic fuse with characteristic corresponding to type B orC)Current carrying capacityup to 70 °C, max. 10A; Permissible load current dependent on the number of terminal blocksfor process terminals, max. 2 AHardware configurationTemperature sensor Yes; For internal cold junction with thermocouple connectionFormation of potential groups● Support of potential groups Yes● New potential group Yes● Potential group continued from left NoSlot● Slot number 1Analog inputsThermocouple (TC)Temperature compensation— Internal temperature compensation YesPotential isolationbetween backplane bus and supply voltage Yes; DC 4 200 V/1 min, Type Test (with half separation distance(basic insulation) per requirement ÜK-III of the F/ F=Failsafe technique)between potential groups (Powerbus) Yes; DC 1 500 V/1 min, Type Test (SELV / PELV for functional earth FE)between process terminals and supply voltage Yes; DC 1 500 V/1 min, Type TestAmbient conditionsAmbient temperature in operation● Horizontal mounting position, min. -40 °C● Horizontal mounting position, max. 70 °C● Vertical mounting position, min. -40 °C● Vertical mounting position, max. 60 °CDimensionsWidth 22.5 mmHeight 175 mmDepth 77 mm

Read more less

Siemens Simatic DP, CPU 1510SP F-1 PN for ET 200SP  6ES75101SJ010AB0  SIMATIC DP, CPU 1510SP F-1 PN for ET 200SP, central processing unit with work memory of 150 KB for program and 750 KB for data, 1st interface: PROFINET IRT with 3 port switches, bit performance 72 NS, SIMATIC Memory Card required, bus adapter required for port 1 and 2 General information Product type designation CPU 1510SP F-1 PN Hardware version FS05 Firmware version V2.9 Product function ● I&M data Yes; I&M0 ... I&M3 ● Replacing a module during operation (Hot Swapping) Yes; Multi Hot Swapping ● Isochronous operation Yes; For PROFINET only; with OB 6 x min. cycle of 625 µs Engineering with ●STEP 7 TIA Portal configurable/integrated from version V17 (FW V2.9) / from V13 SP1 Update 4 (FW V1.8) Configuration control via data set Yes Control elements Operating mode selector 1 Supply voltage Rated value (DC) 24 V Allowable range, lower limit (DC) 19.2 V Allowable range, upper limit (DC ) 28.8 V Reverse polarity protection Yes Mains and voltage interruption buffering ● Mains/voltage interruption buffering time 5 ms Input current Current consumption (nominal value) 0.6 A Ccurrent consumption, max. 0.9 A Inrush current, max. 4.7A; Nominal value I²t 0.14 A²·s Power Supply power in the backplane bus 8.75 W Power dissipation Power dissipation, typ. 5.6 W Memory Number of slots for SIMATIC Memory Card 1 SIMATIC Memory Card required Yes Work memory ● integrated (for program) 150 kbyte ● integrated (for data) 750 kbyte Loading memory ● insertable (SIMATIC Memory Card), max. 32 GB

Read more less

SIEMENS SIMATIC DP, CPU 1510SP-1 PN for ET 200SP  6ES75101DJ010AB0  SIMATIC DP, CPU 1510SP-1 PN for ET 200SP, central processing unit with working memory of 100 KB for the program and 750 KB for data, 1st interface: PROFINET IRTwith 3 Port Switch , Bit performance of 72 NS, SIMATIC Memory Card required,bus adapter required for port 1 and 2 General Information: Product type designation: CPU 1510SP-1 PN Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesMains and voltage interruption bufferingMains/voltage interruption buffering time: 5 ms Input Current Current consumption (nominal value): 0.6 ACurrent consumption, max.: 0.9 AInrush current, max.: 4.7 A; Nominal valueI²t: 0.14 A²·s Power Supply power in the backplane bus: 8.75 W Dissipated Power Power dissipation, typ.: 5.6 W Memory Number of slots for SIMATIC Memory Card: 1SIMATIC Memory Card required: YesIntegrated work memory (for program): 100 kbyteIntegrated work memory (for data) : 750 KBInsertable load memory (SIMATIC Memory Card), max.: 32 GB Maintenance-free backup: Yes

Read more less

SIEMENS SIMATIC DP, CPU 1512SP-1 PN 6ES75121DK010AB0 CPU 1512SP-1 PN for ET 200SP, central unit with work memory 200 KB for the program and 1 MByte for data 1st interface: PROFINET IRT with 3 Port Switch, bit performance of 48 ns, SIMATIC Memory Card required, bus adapter required for port 1 and 2 General information Product type designation: CPU 1512SP-1 PNHardware version: FS05Firmware version: V2.9 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VProtection from polarity reversal: YesMains and voltage interruption buffering● Mains/voltage interruption buffering time: 5 ms Input currentCurrent consumption (nominal value): 0.6 ACurrent consumption, max.: 0.9 AInrush current , max.: 4.7 A; Nominal valueI²t: 0.14 A²·s Power dissipationPower dissipation, typ:. 5.6 W  

Read more less

SIEMENS SIMATIC DP 6ES7512-1SK01-0AB0 CPU 1512SP F-1 PN for ET 200SP, central unit with working memory 300 KB for the program and 1 MByte for data 1st interface: PROFINET IRT with 3 Port Switch, bit performance of 48 ns, SIMATIC Memory Card required, bus adapter required for port 1 and 2. General informationProduct type designation: CPU 1512SP F-1 PNHardware version: FS05Firmware version: V2.9Function of product● I&M data: Yes; I&M0 ... I&M3● Replacing a module during operation (Hot Swapping):Yes; Multi Hot Swapping● Isochronous operation: Yes; For PROFINET only; with OB 6 x min. cycle of 625 µsEngineering with● STEP 7 TIA Portal configurable/integrated from version: V17 (FW V2.9) / from V13 SP1 Update 4 (FW V1.8) Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Input current Current consumption (nominal value): 0.6 ACurrent consumption, max.: 0.9 AInrush current, max.: 4.7 A; Nominal valueI²t: 0.14 A²·s Power dissipated Power dissipation, typ.: 5.6 W

Read more less

Omron NX Series, EtherCAT Coupler, 2 ports, 10A I/O power, 125 micro s refresh  NXECC203 I/O system: NX I/O busModule type: Bus couplerSIL according to IEC 61508: NoneCommunication ports: EtherCAT SlaveNumber of communication ports: 2 Degree of protection (IP): IP20Product height (unpackaged): 100 mmProduct width (unpackaged): 46 mmProduct depth (unpackaged): 80 mm Product weight (without packaging): 250 g

Read more less