INDUSTRIAL AUTOMATION

SIEMENS SIMATIC ET 200SP 6ES71376BD000BA0 SIMATIC ET 200SP, CM 4xIO-Link ST communication module Master IO‑Link V1.1 General informationProduct type designation CM 4xIO-Link STHardware version FS20Firmware version V2.2.2● FW update possible YesUsable BaseUnits BU type A0Color code for module-specific color coding label CC04Product function● I&M data Yes; I&M0 ... I&M3● Isochronous operation No; Only for PROFINET and configuration as version with FW V2.0 or V2.1Engineering with● STEP 7 TIA Portal configurable/integrated from versionFrom STEP 7 V15● STEP 7 configurable/integrated from version From STEP 7 V5.5● PROFIBUS from version GSD/GSD revision Each one GSD file from revision 3 and 5● PROFINET from version GSD/GSD revision GSDML V2.3Supply voltageRated value (DC) 24 VPermitted range, lower limit (DC) 19.2 V; 20.5 V when using IO-Link, since the supply voltage for IO-Link devices on the master must be at least 20 V.Permitted range, upper limit (DC) 28.8 VRequired voltage supply according to NEC class 2 NoInput currentCurrent consumption, max. 45mA; no loadTransducer power supplyNumber of outputs 4Output current● Rated value 700 mA; per channel24 V transducer supply● Short-circuit protection Yes● Output current, max. 2.1 APower dissipationPower dissipation, typ. 1 WHardware configurationAutomatic coding Yes● H-type electronic coding element YesDigital outputsCable length● without shielding, max. 20m; also applies to shielded cables

Read more less

SIEMENS SITOP PSU100S 24 V/10 A 6EP13342BA20 SITOP PSU100S 24 V/10 A stabilized power supply input: AC 120/230 V output: DC 24 V/10 A. General information: Entrance: Form of the electrical network Single-phase ACsupply voltage at AC● initial value Automatic range switchingsupply voltage● 1 at AC rated value 120 V ● 2 with AC 230 V rated valueinput voltage● 1 with AC 85 ... 132 V● 2 with AC 170 ... 264 Vinput design wide input range Nooverloadability due to overvoltage 2.3 x Ue nom, 1.3 msbackup operating condition due to lack ofmains voltage With Ue = 93/187 Vbackup time with rated value of theoutput current in case of mains voltage failure min. 20 msbackup operating condition due to lack of mains voltage             With Ue = 93/187 Vmains frequency● 1 nominal value 50 Hz● 2 value rated 60 Hzmains frequency 47 ... 63 Hzinput current● at rated input voltage 120 V 4.49 A● at rated input voltage 230 V 1.91 Acurrent limitation of the inrush current at 25 °C max. 60 AI2t value max. 5.6 A²·sexecution of protection T 6.3 A/250 V (not accessible)● of the mains cable Recommended circuit breaker: apart. from 10 A characteristic COutputshape of the voltage curve at the output regulated potential-free DC voltageoutput voltage with DC rated value 24 V output voltage ● at output 1 with DC nominal value 24 Vrelative overall voltage tolerance 3 %relative control accuracy of the output voltage● with slow fluctuation of the input voltage 0.1 % ● with slow ohmic load fluctuation 1 %residual ripple● max. 150 mV● typ. 20 mVpeak voltage● max. 240 mV● typ. 160 mVoutput voltage adjustable 22.8 ... 28 Vproduct function output voltage adjustable Yestype of setting of the output voltage Via potentiometerdisplay execution for normal operation LED green for 24 V O.K.type of signal at the output Relay contact (open contact, loadability DC 60 V/0.3 A) for "24 V O.K."progression of the output voltage at switch-on Overshoot of Ua max. intervention delay 0.3 svoltage rise time of the output voltage● typ. 20 msoutput current● rated value 10 A● rated range 0 ... 12 A; 12 A ... +45 °C; +60 ... +70 °C: Derating 3%/Kexported active power typ. 288 Wshort-time overload current● in case of short circuit during normal starting typ. 32 A● in the event of a short circuit during typical operation. 32 Aduration of overloadability due to overcurrent● in case of short circuit during start-up 1 000 ms● in case of short circuit during operation 1 000 msproduct characteristic● parallel connection of equipment Yesnumber of equipment connected in parallel for power increase2Efficiencyefficiency [%] 90 %power dissipated [W]● with nominal value of the output voltage with nominal valueof the output current typ. 25 WRegulationrelative regulation accuracy of the output voltage withrapid input voltage fluctuation of +/- 15 % typ.0.3 %relative regulation accuracy of the output voltage withstep variation of the ohmic load 10/90/10 % typ. 3 %

Read more less

SIEMENS SITOP PSE200U 10 A 6EP19612BA41 SITOP PSE200U 10 A 4-channel selective module input: DC 24 V/40 A output: DC 24 V/4x 10 A threshold value settable 3 ... 10 A with status message for each output * Ex approval no longer available* Inputshape of the electrical network Regulated DC voltagesupply voltage with DC nominal value 24 Vinput voltage with DC 22 ... 30 Voverloadability for overvoltage 35 Vinput current at nominal value of theinput voltage 24 V nominal value 40 A Outputshape of the voltage curve at the output Regulated DC voltageformula for output voltage Ue - approx. 0.2 Vrelative overall tolerance of the known voltage Corresponding to the input supply voltagenumber of outputs 4output current up to 60 °C for each output nominal value 10 Avalue of trip settable for release current ofcurrent-dependent overload 3 ... 10 Atype of setting of the trip value Via potentiometerproduct characteristic parallel connection of outputs Notype of insertion of the outputs Simultaneous activation of all the outputs upon reaching the value ofsupply voltage regime > 20 V, delay time of 24 ms, 100ms or settable via DIP switch for sequential insertion "optimized for the load " Efficiencyefficiency [%] 99 %power dissipation [W] at nominal value of theoutput voltage at nominal value of the output current typ. 10 WDisconnection characteristic per outputswitching characteristic● of the overcurrent disconnection IA = 1.0 ... 1, 5 x set value, switches off after approx. 5 s● of the current limitation IA = 1.5 x set value, shutdown after typ. 100 ms● of immediate switch-off IA > set value and Ue residual current at switch-off typ. 1 mAReset execution via button for each outputRemote RESET function 24 V non-floating input (signal level "high" at > 15 V)Protection and monitoringcarrying out protection on the 15 A input for each output (not accessible)running the display for normal operation Tricolor LED for each output: green LED for "Output on", yellow LED for " Output switched off manually", red LED for "Output switched off due to overcurrent"design of switching contact for signaling functionStatus signal output (pulse/pause signal can be analyzed via functional moduleSIMATIC)Safetypotential separation between input and output at No

Read more less

SIEMENS SITOP PSU200M 10 A 6EP13343BA10 SITOP PSU200M 10 A stabilized power supply input: AC 120/230 ... 500 V output: DC 24 V/10 A  *Ex approval no longer available*  Inputform of the electrical network Single-phase and two-phase ACsupply voltage with AC● initial value Setting via switch on the devicesupply voltage ● 1 with AC 120 ... 230 V● 2 with AC 230 ... 500 Vinput voltage● 1 with AC 85 ... 264 V● 2 with AC 176 ... 550 Vinput execution wide-range input Yesoverloadability due to overvoltage 1300 Vpeak, 1.3 msbackup operating condition due to lack ofmains voltage With Ue = 120/230 V, typ. 150 ms with Ue = 400 Vbuffering time with nominal value of the output currentin case of lack of mains voltage min.25 msbuffering operating condition for lack ofmains voltageWith Ue = 120/230 V, typ. 150 ms with Ue = 400 Vmains frequency● 1 nominal value 50 Hz● 2 nominal value 60 Hzmains frequency 47 ... 63 Hzinput current● at 120 V input voltage rating 4.4 A● at 230 V input voltage rating 2.4 A● at 500 V input voltage rating 1.1 A current limitation of the inrush current to 25 °C max. 35 AI2t value max. 4 A² sexecution of protection T 6.3 A (not accessible)● of the mains cable Recommended thermal-magnetic switch for single-phase operation: starting.from 6 A (10 A) characteristic C ( B); required for two-phase operation:thermic circuit breaker with bipolar coupling or automaticbreaker 3RV2011-1EA10 (setting at 3.8 A) or 3RV2711-1ED10 (UL489) with 230 V, 3RV2011-1DA10 (setting on 3 A) or 3RV2711-1DD10(UL 489) with 400/500 VOutputshape of the voltage curve at the output regulated potential-free direct voltage Output voltage at DC rated value 24 VOutput voltage● at output 1 at DC rated value 24 VRelative overall voltage tolerance 3 %Relative control accuracy of the output voltage ● with slow fluctuation of the input voltage 0.1 %

Read more less

 Siemens sinamics g120c 6SL32101KE158AF2 SINAMICS G120C nominal power: 2.2kW with 150% overload for 3 sec. 3AC380-480V+10/-20% 47-63Hz integrated class A filter I/O interface: 6DI, 2DO, 1AI, 1AO Integrated Safe-Torque-Off integrated fieldbus: PROFINET PN protection degree IP20/UL Open type size : FSAA 173x 73x 178 (HxWxD) 24V external

Read more less

SIEMENS SINAMICS G120C 6SL32101KE175AF1 SINAMICS G120C rated power: 3.0kW with 150% overload for 3 sec. 3AC380-480V+10/-20% 47-63Hz integrated class A filter I/O interface: 6DI, 2DO, 1AI, 1AO Integrated Safe-Torque-Off integrated fieldbus: PROFINET PN protection degree IP20/UL Open type size : FSA 196x 73x 225.4 (HxWxD) 24V external.

Read more less

SIEMENS SITOP PSU200M 5 A 6EP13333BA10 SITOP PSU200M 5 A stabilized power supply input: AC 120/230 ... 500 V output: DC 24 V/5 A *Ex approval no longer available* Inputform of the electrical network Single-phase and two-phase ACsupply voltage with AC● initial value Setting via switch on the equipment; start from EU >90/180 V supply voltage● 1 at AC 120 ... 230 V● 2 at AC 230 ... 500 V input voltage● 1 at AC 85 ... 264 V● 2 at AC 176 ... 550 V input implementation wide-range input Yesoverload capability for overvoltage 1300 Vpeak, 1.3 ms backup operating condition due to lack of mains voltageWith Ue = 120/230 V, typ. 150 ms with Ue = 400 Vbuffering time with nominal value of the output currentin case of mains voltage failure min. 25 ms backup operating condition due to lack ofmains voltageWith Ue = 120/230 V, typ. 150 ms with Ue = 400 V mains frequency● 1 nominal value 50 Hz● 2 nominal value 60 Hzmains frequency 47 ... 63 Hz input current● at rated input voltage 120 V 2.2 A● at rated input voltage 230 V 1, 2 A● at nominal value of the input voltage 500 V 0.61 Acurrent limitation of the inrush current at 25 °C max. 35 AI2t value max. 1.7 A²·s execution of protection T 3.15 A (not accessible)● of the mains cable Recommended thermomagnetic switch for single-phase operation: separately from 6 A (10 A) characteristic C (B); required for two-phase operation:thermic circuit breaker with bipolar coupling or automaticbreaker 3RV2011-1EA10 (setting to 3.8 A) or 3RV2711-1ED10 (UL489) with 230 V, 3RV2011-1DA10 (setting on 3 A) or 3RV2711-1DD10(UL 489) with 400/500 VOutputshape of the voltage curve at the output regulated potential-free direct voltage Output voltage with DC rated value 24 V output voltage● at output 1 with DC nominal value 24 Vrelative overall voltage tolerance 3 %relative control accuracy of output voltage  

Read more less

SIEMENS SINAMICS G120C PN 11.0KW FILA  6SL32101KE226AF1 SIMATIC ET 200SP, PROFINET interface module IM 155-6PN Basic, max. 12 I/O modules, 2x built-in RJ45 sockets incl. server module General information:Product type designation IM 155-6 PN BAHardware version from FS04Firmware version ● FW update possible Yes Product function● I&M data Yes; I&M0 ... I&M3● Replacing a module during operation (Hot Swapping) Yes; Single Hot Swapping● Isochronous operation No Engineering with● STEP 7 TIA Portal configurable/integrated from version V13 SP1● STEP 7 configurable/integrated from version V5.5 SP4● PROFINET from GSD version/GSD revision GSDML V2.31 Configuration controlvia data set Yes Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) ) 28.8 VReverse polarity protection YesShort circuit protection Yes Mains and voltage interruption buffering● Mains/voltage interruption buffering time 5 ms Input currentCurrent consumption, max. 300 mA I²t 0.09 A²·s Power dissipationPower dissipation, typ. 1.8 W Address spaceAddress space per module● Address space per module, max. 32 bytes; resp. for input and output dataAddress space per station● Address space per station, max. 32 bytes Hardware configurationMounting frame● Max. of usable ET 200SP modules 12● Max. of usable ET 200AL modules 0 InterfacesNumber of PROFINET interfaces 1; 2 ports (switch)

Read more less

SIEMENS SIMATIC ET 200SP 6ES71556AR000AN0 SIMATIC ET 200SP, PROFINET interface module IM 155-6PN Basic, max. 12 I/O modules, 2x built-in RJ45 sockets incl. server module. General information: Product type designation IM 155-6 PN BAHardware version from FS04Firmware version● FW update possible Yes Product function● I&M data Yes; I&M0 ... I&M3● Replacing a module during operation (Hot Swapping)Yes; Single Hot Swapping● Isochronous operation No Engineering with● STEP 7 TIA Portal configurable/integrated fromversion V13 SP1● STEP 7 configurable/integrated from version V5. 5 SP4● PROFINET from GSD version/GSD revision GSDML V2.31 Configuration control via data set Yes Supply voltageRated value (DC) 24 VPermissible range, lower limit (DC) 19.2 VPermissible range, limit upper (DC) 28.8 VReverse polarity protection YesShort circuit protection Yes Mains and voltage interruption buffering● Mains/voltage interruption buffering time 5 ms Input currentCurrent consumption, max. 300 m I²t 0.09 A²·s Power dissipationPower dissipation, typ. 1.8 W Address spaceAddress space per module● Address space per module, max. 32 bytes; resp. for input and output dataAddress space per station● Address space per station, max. 32 bytes Hardware configurationMounting frame● Max. of usable ET 200SP modules 12● Max. number of usable ET 200AL modules 0

Read more less

SIEMENS SIMATIC S7-1200 6ES72266BA320XB0 SIMATIC S7-1200, digital input module SM 1226, F-DI 16X DC 24V, PROFIsafe, width 70mm, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General information:Product type designation SM 1226, F-DI 16x24 VDC Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) ) 28.8 VVoltage supply required according to NEC class 2 No Input currentfrom backplane bus DC 5 V, max. 155mA; Current consumption (SM bus, DC 5 V): 155 mADigital inputs● from load voltage L+ (without load), max. 130mA; 130 mA + 6 mA / input used + any current usedVsensor1/Vsensor2 Power dissipationPower dissipation, typ. 7 W Digital inputsNumber of inputs 16; 16 (1oo1) or 8 (1oo2); Note: You can individually assign each pair of "a.x" and "b.x" inputs as a single 1oo2 channel or as 2 separate 1oo1channels Number of inputs that can be managed simultaneouslyHorizontal mounting position— up to 50 °C, max. 16; 16 inputs, with horizontal installation at 55 °CVertical mounting position— up to 40 °C, max. 16; 16 inputs, with vertical installation at 45 °C Input voltage● for signal "0" DC -30 V ... DC +5 V● for signal "1" DC 15 V .. DC 30 V Input current● for signal "0", max. (permissible quiescent current) 0.5 mA● for signal "1", typ. 5 mA Input delay (with nominal value of the input voltage)for standard inputs— parameterizable Yes; 0.8 / 1.6 / 3.2 / 6.4 / 12.8 ms Cable length● with shielding, max. 200m; Unshielded with input filter time of 1.6 ms to 12.6 ms (with an input delay of 0.8 ms, shielded cables must be used for digital inputs and sensor power)● without shielding, max. 200m; Shielded with input filter time 0.8 ms to 12.6 ms (with an input delay of 0.8 ms, shielded cables must be used for digital inputs and sensor power) Alarms/diagnostics/status informationDiagnostic display LED● for input status Yes

Read more less

SIEMENS SIMATIC S7-1200, CPU 1212C  6ES72121AE400XB0 SIMATIC S7-1200, CPU 1212C, compact CPU, DC/DC/DC, onboard I/O: 8 DI, DC 24 V; 6 DO DC 24V; 2 AI 0...10V DC, power supply: DC DC 20.4...28.8V, program memory / data memory 100 KB General informationProduct type designation CPU 1212C DC/DC/DCFirmware version V4.6 Engineering with● Programming package from STEP 7 V18 Supply voltageRated value (DC)● DC 24 V YesPermissible range, lower limit (DC) 20.4 VPermissible range, upper limit (DC) 28.8 VReverse polarity protection YesLoad voltage L+● Rated value (DC) 24 V● Permissible range, lower limit ( DC) 20.4 V● Allowable range, upper limit (DC) 28.8 V Input currentCurrent consumption (nominal value) 400 mA; CPU onlyCurrent consumption, max. 1 200 mA; CPU with all expansion modulesInrush current, max. 12A; at DC 28.8 V I²t 0.5 A² s Output currentfor backplane bus (DC 5 V), max. 1 000 mA; max. DC 5 V for SM and CM Transducer power supply24 V transducer power supply● 24 V L+ minus 4 V DC min. Power dissipationPower dissipation, typ. 9 W MemoryWork memory● integrated 100 KBLoad memory● integrated 2 MB● insertable (SIMATIC Memory Card), max. with SIMATIC Memory Card Back-up collision● present Yes● maintenance-free Yes● without battery Yes CPU processing times for bit operations, typ. 0.08 μs; / instruction

Read more less

SIEMENS SIMATIC S7-1500F 6ES75173FP000AB0 SIMATIC S7-1500F, CPU 1517F-3 PN/DP, central processing unit with 3MByte work memory for the program and 8MByte for the data, 1st interface: PROFINET IRT with 2 Port Switch, 2nd interface: PROFINET RT, 3rd interface: PROFIBUS, 2 ns bit performance, SIMATIC Memory Card required. General information: Product type designation CPU 1517F-3PN/DPHardware version FS10Firmware version V3.0● FW update possible Yes Product function● I&M data Yes; I&M0 ... I&M3● Isochronous operation Yes; Decentrally and centrally; with min. OB 6 x cycle of 250 μs(decentrally) and 1 ms (centrally) Engineering with● STEP 7 TIA Portal configurable/integrated starting fromversion V18 (FW V3.0); from V13 Update 3 (FW V1.6) Configuration controlvia data set Yes DisplayScreen diagonal [cm] 6.1 cm Control elementsNumber of keys 6Operating mode selector 1 Supply voltageRated value (DC) 24 VPermissible range, lower limit (DC) 19.2 VPermissible range, limit upper (DC) 28.8 VReverse polarity protection Yes Mains and voltage failure buffering● Mains/voltage failure buffering time 5 ms● Repetition rate, min. 1/s Input currentCurrent consumption (nominal value) 1.55 AInrush current, max. 1.9A; Nominal value I²t 0.02 A²·s PowerPower supply in the backplane bus 12 WPower absorbed by the backplane bus (balanced) 30 W Power dissipationPower dissipation, typ. 24 W MemoryNumber of slots for SIMATIC Memory Card 1SIMATIC Memory Card required Yes

Read more less

SIEMENS SIMATIC S7-1200, CPU 1214C 6ES72141HG400XB0 SIMATIC S7-1200, CPU 1214C, compact CPU, DC/DC/relay, onboard I/O: 14 DI DC 24 V; 10 DO relay 2A; 2 AI 0...10V DC, power supply: DC DC 20.4...28.8V, program memory / data memory 150 KB General information: Product type designation CPU 1214C DC/DC/relayFirmware version V4.6 Engineering with● Programming package from STEP 7 V18 Supply voltageRated value (DC)● DC 24 V YesPermissible range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Load voltage L+● Rated value (DC) 24 V● Permissible range, lower limit (DC) 20.4 V● Allowable range, upper limit (DC) 28.8 V Input currentCurrent consumption (nominal value) 500 mA; CPU onlyCurrent consumption, max. 1 500 mA; CPU with all expansion modulesInrush current, max. 12A; at 28.8 V I²t 0.8 A²·s Output currentfor backplane bus (DC 5 V), max. 1 600 mA; max. DC 5 V for SM and CM Transducer power supply24 V transducer power supply● 24 V L+ minus 4 V DC min. Power dissipationPower dissipation, typ. 12 W MemoryWork memory● integrated 150 KBLoad memory● integrated 4 MB● insertable (SIMATIC Memory Card), max. with SIMATIC Memory Card Infill collision● present Yes● maintenance-free Yes● without battery Yes CPU processing timesfor bit operations, typ. 0.08 μs; / instruction

Read more less

SIEMENS DIGITAL OUTPUT SM 1226, F-DQ 4X 24VDC  6ES72266DA320XB0 SIMATIC S7-1200, digital output module SM 1226, F-DQ 4x DC 24V 2A, PROFIsafe, width 70mm, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508) . General information:Product type designation SM 1226 F-DQ 4 x 24 VDC Supply voltageAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VVoltage supply required according to NEC class 2 No Input currentfrom backplane bus DC 5 V, max. 125 mA Digital outputs● from load voltage L+, max. 170 mA Power dissipationPower dissipation, typ. 8 W Digital outputsNumber of outputs 4● in groups of 1Short circuit protection Yes Interrupting capacity of outputs● with ohmic load, max. 30 Hz● with lamp load, max. 10Hz Output voltage                                                                        ● Rated value (DC) 24 466> Output current● for signal "1" rated value 2 A● for signal "1" permissible range, max. 10 mA ... 2.4 A● for signal "0" residual current, max. Switch on PNP: 0.5 mA, max.; NPN switch: 0.5 mA, max. Cable length● with shielding, max. 200 m● unshielded, max. 200 m Alarms/diagnostics/status informationDiagnostic display LED● for output status Yes Degree of protection and safety classIP protection degree IP20Standards, approvals, certificatesCE mark YescULus Yes FM approval YesHighest safety class achievable in safety operation● Performance Level according to ISO 13849-1 Category 4, PL e● SIL according to IEC 61508 SIL 3

Read more less

SIEMES SIMATIC S7-1200, CPU 1214C  6ES72141AG400XB0 SIMATIC S7-1200, CPU 1214C, compact CPU, DC/DC/DC, onboard I/O: 14 DI DC 24 V; 10 DO DC 24V; 2 AI 0...10V DC, power supply: DC DC 20.4...28.8V, program memory / data memory 150 KB. General information: Product type designation CPU 1214C DC/DC/DCFirmware version V4.6 Engineering with● Programming package from STEP 7 V18Supply voltageRated value (DC)● DC 24 V Yes Allowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Load voltage L+● Rated value (DC) 24 V● Permissible range, lower limit (DC) 20.4 V● Allowable range, upper limit (DC) 28.8 V Input currentCurrent consumption (nominal value) 500 mA; CPU onlyCurrent consumption, max. 1 500 mA; CPU with all expansion modulesInrush current, max. 12A; at 28.8 V I²t 0.5 A²·s Output currentfor backplane bus (DC 5 V), max. 1 600 mA; max. DC 5 V for SM and CM Transducer power supply24 V transducer power supply● 24 V L+ minus 4 V DC min. Power dissipationPower dissipation, typ. 12 W MemoryWork memory● integrated 150 kbyte Load memory● integrated 4 MB● insertable (SIMATIC Memory Card), max. with SIMATIC Memory Card Back-up collision● present Yes● maintenance-free Yes● without battery Yes CPU processing timesfor bit operations, typ. 0.08 μs;   

Read more less

SIEMENS SIMATIC S7-200 6ES72310HC220XA0 SIMATIC S7-200, analog input module EM 231, only for S7-22X CPU, 4 AI, 0-10V DC, 12 bit converter - Spare part. General information: Input currentfrom load voltage L+ (without load), max. 60 mAfrom backplane bus DC 5 V, max. 20 mA Power dissipationPower dissipation, typ. 2 W Analog inputsNumber of analog inputs 4; DifferenceAllowed input voltage for voltage input (destructivelimit), max. 30 VPermissible input current for current input (destructivelimit), max. 32 mA Input ranges● Voltage Yes● Current Yes● Thermocouple No● Thermoresistance No● Resistance No Input ranges (nominal values), voltages● 0 ... +5 V Yes— Input resistance (0 ... 5 V) 10 MΩ● 0 ... +10 V Yes— Input resistance (0 ... 10 V) 10 MΩ● -2.5 V ... +2, 5 V Yes— Input resistance (-2.5 V ... +2.5 V) 10 MΩ● -5 V ... +5 V Yes— Input resistance (-5 V ... +5 V) 10 MΩ Input ranges (nominal values), currents● 0 ... 20 mA Yes— Input resistance (0 ... 20 mA) 10 MΩ Thermocouple (TC)Temperature compensation— parameterizable No Cable length● with shielding, max. 100m; to the sensorAnalog value generation for the inputsIntegration and conversion time / resolution per channel● Resolution with overrange (bit incl. sign),max. 12 bit● Interference voltage suppression for frequencyinterference f1 in Hz 40 dB, DC ... 60 V for interference frequency 50 / 60 Hz● Conversion time (per channel) 250 μs6ES72310HC220XA0  

Read more less

SIEMENS COMMUNICATION PROCESSOR CP 1543-1 6GK75431AX000XE0 CP 1543-1 communications processor for connecting SIMATIC S7-1500 to Industrial Ethernet; TCP/IP, ISO, UDP, S7 communication, IP broadcast/multicast, security (VPN, firewall) diagnostics SNMPv1/v3, DHCP, FTP client/server, e-mail, IPv4/IPv6, IEEE 802.1X (radius), time synchronization via NTP, 1x RJ45 (10/100/1000 Mbit). General information: Transmission rate● on interface 1 10 ... 1000 Mbit/s Interfacesnumber of interfaces / according to Industrial Ethernet 1number of electrical connections● on interface 1 / according to Industrial Ethernet 1 carrying out the electrical connection● on interface 1 / according to Industrial Ethernet RJ45 port Supply voltage, absorbed current, dissipated powertype of voltage / of the DC supply voltagesupply voltage / 1 / from backplane bus 15 Vrelative symmetrical tolerance / with DC● with 15 V 3 % current consumption● from backplane bus / with DC / with 15 V / typ. 0.35 A power dissipation [W] 5.3 W Environmental conditions ambient temperature● for vertical installation / during operation 0 ... 40 °C● with horizontal installation / during operation 0 .. .60 °C● during storage -40 ... +70 °C● during transport -40 ... +70 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection degree IP20 Design, dimensions and weightsmodule format Single-width compact S7-1500 modulewidth 35 mmheight 142 mmdepth 129 mmnet weight 0.35 kgfastening type● mounting on S7-1500 profile rail Yes Product features, product functions, product components / genericnumber of units● per CPU / max. 8● note dependent on CPU type

Read more less

SIEMENS SIRIUS SAFETY RELAY STD RELAY 3NO,1NC 3SK11112AB30 SIRIUS safety device basic device Standard series relay enabling circuits 3 NO contacts plus relay signaling circuit 1 NC Us = AC/DC 24 V spring terminal (Push-in). General technical data:IP protection degree of the housing IP20contact protection against electrocution finger protectioninsulation voltage nominal value 300 V Ambient temperature● during storage -40 ... +80 °C● during operation -25 ... +60 ° Catmospheric pressure according to SN 31205 90 ... 106 kParelative humidity during operation 10 ... 95 %installation altitude for altitude above sea level. max. 4 000 m; For derating see Product Communication 109792701vibration resistance according to IEC 60068-2-6 5 ... 500 Hz: 0.75 mmshock resistance 10g / 11 msimpulse withstand voltage nominal value 4 000 VeMC interference emission IEC 60947-5-1, IEC 61000EMC-related installation environment This product is suitable for class B environments and can also be usedin domestic environments .overvoltage category 3pollution degree 3reference code according to IEC 81346-2:2009 Fpower dissipation [W] max. 2 Wnumber of inputs for 1- or 2-channel sensors 1cascade connection noneinput safety wiring designsingle-channel and redundant product feature cross-circuit protection Yes Safety Integrity Level (SIL)● according to IEC 62061 3● according to IEC 61508 3performance Level (pL) ● according to ISO 13849-1 and category according to EN ISO 13849-1 4non-dangerous failure rate (SFF) 99 %PFHD for high demand rate according to EN 62061 1.7E-9 1/hPFDavg for low demand rate according to IEC 61508 1E-6T1 value for proof test interval or duration of use according to IEC 61508 20 years.

Read more less

SIEMENS SIMATIC NET SCALANCE XB005 6GK50050BA001AB2 SCALANCE XB005 unmanaged Industrial Ethernet Switch for 10/100 Mbit/s; for the configuration of small star structures and linear structures; LED diagnostics, IP20, AC/DC 24V voltage supply, with 5x 10/100 Mbit/s Twisted Pair Ports with RJ45 sockets. General information: Transmission ratetransmission rate 10 Mbit/s, 100 Mbit/s Interfaces / for communication / max. configuration with modular devicesnumber of electrical doors / max. 5interfaces / for communication / integr.number of electrical connections● for network components or terminal equipment 5; RJ45number of SC ports at 100 Mbit/s● for multimode 0 interfaces / othersnumber of electrical connections● for voltage supply 1execution of the electrical connection● for voltage supply Terminal block 3 poly Supply voltage, current consumption, power dissipationvoltage type / 1 / of the DC supply voltage● supply voltage / 1 / nominal value 24 V● power dissipation [W] / 1 / nominal value 1.68 W● supply voltage / 1 / nominal value 19.2 ... 28.8 V● current consumption / 1 / max. 0.07 A● execution of the electrical connection / 1 / for voltage supply3-pole terminal block● integral part of the product / 1 / input protectionpower supply Yes● implementation of protection / 1 / on the input forsupply voltage 0.6 A / 60 Vtype of voltage / 2 / of the supply voltage AC● voltage power supply / 2 / nominal value 19.2 ... 28.8 V Environmental conditionsambient temperature● during operation -10 ... +60 °C● during storage -40 ... + 80 °C● during transport -40 ... +80 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection degree IP20construction form, dimensions and weightsBox construction formwidth 45 mmheight 100 mm

Read more less

SIEMENS SINAMICS G120C PN 0.75KW FILA  6SL32101KE123AF2 SINAMICS G120C rated power: 0.75kW with 150% overload for 3 sec. 3AC380-480V+10/-20% 47-63Hz integrated class A filter I/O interface: 6DI, 2DO, 1AI, 1AO Integrated Safe-Torque-Off integrated fieldbus: PROFINET PN protection degree IP20/UL Open type size : FSAA 173x 73x 178 (HxWxD) 24V external.  

Read more less

Siemens ie fc rj45 plug 180 2X2  6GK19011BB102AA0  Industrial Ethernet FastConnect RJ45 Plug 180 2x 2, RJ45 connector (10/100 Mbit/s) with robust metal housing and FC connection technology, for IE FC 2x 2 cable; 180° cable exit. Fitness for employment      For connection to IE FC TP 2 x 2 cables, suitable for quick assembly with the FastConnect system Transmission rate transmission rate / with Industrial Ethernet           10 Mbit/s, 100 Mbit/s Interfaces number of electrical connections      for Industrial Ethernet FC TP 4 cables for network components or terminal equipment 1 Making the electrical connection  for Industrial Ethernet FC TP cables Integrated insulation displacement contacts for 4-core TP FC installation cables AWG 22 for network components or terminal equipment RJ45 connector carrying out the electrical connection / FastConnect     Yes Mechanical data case material /        metal number of reuses       10 interlock execution       other Constructive form, dimensions and weights cable exit type          180° cable exit width           13.7 mm height 16 mm depth         55 mm net weight        35 g connectable cable diameter      6.5 ... 6.5 mm connectable conductor section           0.33 mm² Environmental conditions ambient temperature during operation -40 ... +85 °C during storage -40 ... +85 °C during transport -40 ... +85 °C relative humidity at 25 °C / without condensation / during operation / max. 95 % IP protection degree   IP20 Product features, product functions, product components / generic product feature         with PoE property Yes with PoE+ property Yes absence of silicone Yes An integral part of the product  fire relief Yes Standards, specifications, approvals Certificate of eligibility   RoHS compliant Yes UL approval Yes cULus approval Yes railway use according to EN 50155 No standard for structured cabling        C

Read more less

Siemens Industrial Ethernet FastConnect 6GK19010DB206AA0 Industrial Ethernet FastConnect M12 Plug PRO 2x2 M12 connector with robust metal housing and FC connection technology, with axial cable outlet (D-coded) 1 pack = 1 piece for SCALANCE X208 PRO and ET 200 PRO PN. Eligibility for employment:     For connecting electrical cables to SCALANCE X208PRO, ET 200pro PN or ET 200eco PN, for quick assembly with the FastConnect system Transmission rate transmission rate / with Industrial Ethernet 10 Mbit/s, 100 Mbit/s Interfaces  number of electrical connections      for Industrial Ethernet FC TP 4 cables for network components or terminal equipment 1 Making the electrical connection  for Industrial Ethernet FC TP cables Integrated insulation displacement contacts for 4-core TP FC installation cables AWG 22 for network components or terminal equipment M12 connector (D-coded) carrying out the electrical connection / FastConnect     Yes Mechanical data material / of the case    metal number of reuses       10 interlock execution       Screw connection tightening torque / for M12 round connector / max. 0.6 N m coding connector / of the M12 round connector           D constructive form, dimensions and weights cable exit type          180° cable exit width           19 mm height 19 mm depth         73 mm net weight        40 g connectable cable diameter      6.5 ... 6.5 mm connectable conductor section           0.33 mm² environmental conditions Room temperature during operation -40 ... +85 °C during storage -40 ... +85 °C during transport -40 ... +85 °C Relative humidity at 25 °C / without condensation / during operation / max. 95 % Chemical resistance         water resistant IP protection degree   IP65/67

Read more less

SIEMENS SIMATIC HMI KTP400 COMFORT  6AV21242DC010AX0 SIMATIC HMI KTP400 Comfort, Comfort Panel, key/touch operation, 4" widescreen TFT display, 16 million colours, PROFINET interface, MPI/PROFIBUS DP interface, 4 MB configuration memory, Windows CE 6.0, configurable from WinCC Comfort V11. General information:Product type designation KTP400 Comfort DisplayDisplay design TFTScreen diagonal 4.3 inDisplay width 95 mmDisplay height 53.8 mm Number of colors 16 777 216 Resolution (pixels)● Horizontal image resolution 480 pixels● Vertical image resolution 272 pixels Backlight● MTBF of backlight (at 25 °C) 80 000 h● Backlight dimmable Yes; 0-100 % Control elementsKeyboard fonts● Function keys— Number of function keys 4— Number of function keys with LED 4 ● Keys with LED Yes● System keys No● Numeric keypad Yes; Onscreen Keyboard● Alphanumeric Keyboard Yes; Onscreen Keyboard Touch operation● Version as touchscreen Yes; analog-resistiveExpansions for process control● DP direct LEDs (LEDs as S7 output I/O)— F1...Fx 4● Direct keys (keys as S7 output I/O) S7 input)— F1...Fx 4● Direct keys (virtual touch keys as S7 input peripherals) 32 Mounting typeVertical installation positionDirect / wall mounting NoVertical built-in possible (portrait format) YesPossible horizontal recessed installation (landscape format) YesMaximum inclination angle allowed without ventilationforced 35°.  

Read more less

SIEMENS SITOP SEL1200 SELECTIVITY MODULE 8 *10A 6EP44387FB003DX0 SITOP SEL1200 8-channel selective module switching characteristic input: DC 24 V/60 A output: DC 24 V/8 x 10 A settable threshold value 2 ... 10 A with monitoring interface. General information: Inputshape of the electrical network Regulated DC voltagesupply voltage with DC rated value 24 Vinput voltage with DC 20.4 ... 30 Voverloadability for overvoltage 35 Vinput current with nominal value of the input voltage24 V nominal value 60 A Outputshape of the voltage curve at the output Regulated DC voltageformula for output voltage Ue - approx. 0.2 Voverall relative voltage tolerance known Corresponding to the input supply voltage number of outputs 8output current up to 60 °C for each output rated value 10 A; +60 ... +70 °C: Derating 2%/K settable trip value for current-dependent overload release current 2 ... 10 Atype of trip value setting Via potentiometercharacteristic of the product parallel connection of outputs Yestype of activation of the outputs Activation of all outputs when the steady state value of thesupply voltage > 20 V is reached, delay time of 25 ms, 200 ms, 500 ms or can be set via DIP switch for "load-optimized" sequential switching Efficiencyefficiency [%] 98 %power dissipation [W] at nominal value of theoutput voltage at nominal value of the output current typ. 18 W Switch-off characteristic for each outputswitching characteristic● of overcurrent shutdown IA > 2.0 x set value, switch-off after approx. 30 ms, IA > 1.8 x setvalue, switches off after approx. 0.1 s, IA > 1.5 x set value,switch-off after approx. 1 s, IA > 1.0 x set value, switches off after approx. 5 s● of immediate switch-off IA > set value and Ue 15 V) Protection and monitoringperforming protection on the 16 A input for each output (not accessible) performing the display for normal operation Tricolor LED for each output: green LED for "Output switched on", yellow LED for "Output manually switched off", red LED for "Output switched off due to overcurrent" execution of the switching contact for signaling function. Status signal output or floating cumulative signaling contact (pause/pulse signal selectable from the Simatic function block).  

Read more less