Siemens 6ES72211BF320XB0SIMATIC S7-1200, digital input module SM 1221, 8 DI, DC 24V, Sink/Source SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various options of communication. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs.

Read more less

Siemens 6ES72213BD300XB0SIMATIC S7-1200, digital input module SB 1221, 4DI, DC 24V 200kHz, M reading SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various control options communication. If you need to expand your SIMATIC S7-1200 CPU with only a few inputs or outputs, Signal Boards are a valid alternative to input and output modules. The Signal Boards are inserted directly on the front of the controller (also possible with CPU 1211C) and are available as analogue or digital inputs and outputs and mixed modules. A Communication Board with RS 485 interface is also available. The Signal Boards also allow subsequent expansion of the configuration without requiring additional space in the control cabinet.

Read more less

Siemens 6ED10551HB000BA2LOGO! DM8 24R expansion module, SV/I/O: 24V/24V/relay, 2UM 4 DE/4 DA, AC/DC/NPN Input for LOGO! 8 The LOGO! expansion modules allow you to create a LOGO! very personalized. A LOGO! basic device 8 can be expanded up to max. 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs. For this purpose, ten different expansion modules are available which allow the addition of digital or analog inputs and outputs with different input voltages.

Read more less

Siemens 6ED10551NB100BA2LOGO! DM16 24R expansion module, SV/I/O: DC 24V/DC 24V/relay, 8 DI/8 DO, 4TE for LOGO! 8 The LOGO! expansion modules allow you to create a LOGO! very personalized. A LOGO! basic device 8 can be expanded to max.24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs. For this purpose, ten different expansion modules are available which allow the addition of digital or analog inputs and outputs with different input voltages.

Read more less

Siemens 6ED10551CB000BA2LOGO! DM8 24 Expansion module, SV/I/O: 24V/24V/trans., 4 DE/4 DA for LOGO! 8 The LOGO! expansion modules allow you to create a LOGO! very personalized. A LOGO! basic device 8 can be expanded up to max. 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs. For this purpose, ten different expansion modules are available which allow the addition of digital or analog inputs and outputs with different input voltages.

Read more less

SIEMENS SIMATIC S7-1200 6ES72266BA320XB0 SIMATIC S7-1200, digital input module SM 1226, F-DI 16X DC 24V, PROFIsafe, width 70mm, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General information:Product type designation SM 1226, F-DI 16x24 VDC Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) ) 28.8 VVoltage supply required according to NEC class 2 No Input currentfrom backplane bus DC 5 V, max. 155mA; Current consumption (SM bus, DC 5 V): 155 mADigital inputs● from load voltage L+ (without load), max. 130mA; 130 mA + 6 mA / input used + any current usedVsensor1/Vsensor2 Power dissipationPower dissipation, typ. 7 W Digital inputsNumber of inputs 16; 16 (1oo1) or 8 (1oo2); Note: You can individually assign each pair of "a.x" and "b.x" inputs as a single 1oo2 channel or as 2 separate 1oo1channels Number of inputs that can be managed simultaneouslyHorizontal mounting position— up to 50 °C, max. 16; 16 inputs, with horizontal installation at 55 °CVertical mounting position— up to 40 °C, max. 16; 16 inputs, with vertical installation at 45 °C Input voltage● for signal "0" DC -30 V ... DC +5 V● for signal "1" DC 15 V .. DC 30 V Input current● for signal "0", max. (permissible quiescent current) 0.5 mA● for signal "1", typ. 5 mA Input delay (with nominal value of the input voltage)for standard inputs— parameterizable Yes; 0.8 / 1.6 / 3.2 / 6.4 / 12.8 ms Cable length● with shielding, max. 200m; Unshielded with input filter time of 1.6 ms to 12.6 ms (with an input delay of 0.8 ms, shielded cables must be used for digital inputs and sensor power)● without shielding, max. 200m; Shielded with input filter time 0.8 ms to 12.6 ms (with an input delay of 0.8 ms, shielded cables must be used for digital inputs and sensor power) Alarms/diagnostics/status informationDiagnostic display LED● for input status Yes

Read more less

SIEMENS DIGITAL OUTPUT SM 1226, F-DQ 4X 24VDC  6ES72266DA320XB0 SIMATIC S7-1200, digital output module SM 1226, F-DQ 4x DC 24V 2A, PROFIsafe, width 70mm, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508) . General information:Product type designation SM 1226 F-DQ 4 x 24 VDC Supply voltageAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VVoltage supply required according to NEC class 2 No Input currentfrom backplane bus DC 5 V, max. 125 mA Digital outputs● from load voltage L+, max. 170 mA Power dissipationPower dissipation, typ. 8 W Digital outputsNumber of outputs 4● in groups of 1Short circuit protection Yes Interrupting capacity of outputs● with ohmic load, max. 30 Hz● with lamp load, max. 10Hz Output voltage                                                                        ● Rated value (DC) 24 466> Output current● for signal "1" rated value 2 A● for signal "1" permissible range, max. 10 mA ... 2.4 A● for signal "0" residual current, max. Switch on PNP: 0.5 mA, max.; NPN switch: 0.5 mA, max. Cable length● with shielding, max. 200 m● unshielded, max. 200 m Alarms/diagnostics/status informationDiagnostic display LED● for output status Yes Degree of protection and safety classIP protection degree IP20Standards, approvals, certificatesCE mark YescULus Yes FM approval YesHighest safety class achievable in safety operation● Performance Level according to ISO 13849-1 Category 4, PL e● SIL according to IEC 61508 SIL 3

Read more less

SIEMENS DIGITAL INPUT SM 1221  6ES7221-1BH32-0XB0 Digital input unit SM 1221, 16DI, DC 24V, Sink/Source. General informationProduct type designation SM 1221, DI 16x24 VDCSupply voltageNominal value (DC) 24 VPermissible range, lower limit (DC) 20.4 VPermissible range, upper limit (DC) 28.8 VInput currentfrom backplane bus 5 V DC, max. 130 mA Digital inputs● from load voltage L+ (no load), max. 4 mA; per channeloutput voltage / headertransmitter supply voltage / header● present Yes Power dissipatedPower dissipation, typ. 2.5 WDigital inputs Number of entrances 16● in groups of 4 Input characteristic according to IEC 61131, Type 1 YesNumber of inputs that can be managed simultaneouslyall installation positions— up to 40 °C, max. 16 Horizontal mounting position— up to 40 °C, max. 16— up to 50 °C, max. 16 Vertical mounting position— up to 40 °C, max. 16 Input voltage● Rated value (DC) 24 V● for signal "0" 5 V DC with 1 mA● for signal "1" DC 15 V with 2.5 mA Input current● for signal "0", max. (permissible quiescent current) 1 mA● for signal "1", min. 2.5 mA● for signal "1", typ. 4 mA Delay in entry (with nominal input voltage value)for standard inputs— parameterizable Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of 4 for alarm inputs.

Read more less

SIEMENS S7-1500, DI 32X24VDC HF 6ES7521-1BL00-0AB0 SIMATIC S7-1500, DI 32xDC 24V HF digital input module, 32 channels in groups of 16; of which 2 inputs can be used for counting; input delay 0.05..20ms input type 3 (IEC 61131); diagnostics; Process interrupt: front connector (screw terminals or push-in) to be ordered separately. General informationProduct type designation DI 32x24VDC HFHardware version from FS04Firmware version V2.2.1● FW update possible YesProduct function● I&M data Yes; I&M0 ... I&M3● Isochronous operation Yes● Prioritized start Yes Engineering with● STEP 7 TIA Portal configurable/integrated from theversionV13 SP1 / -● STEP 7 configurable/integrated from version V5.5 SP3 / -● PROFIBUS from version GSD/GSD revision V1.0 / V5.1● PROFINET from GSD version/GSD revision V2.3 / - Operating mode● DI Yes● Counter Yes● Oversampling No● MSI Yes Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC ) 28.8 VReverse polarity protection Yes Input currentCurrent consumption, max. 40mA; 20 mA each group with DC 24 V supply voltage PowerPower draw from backplane bus 1.1 WPower lossPower loss, typ. 4.2 WDigital inputs Number of inputs 32parameterizable digital inputs YesRead on m/p Read on PInput characteristic according to IEC 61131, Type 3 Yes Digital input functions, parameterizable● Gate start/stop Yes● Digital input freely usable Yes

Read more less

SIEMENS SIMATIC S7-1500 (DC 24 V - 130MA) 6ES75262BF000AB0 Digital output module F, F-DQ 8x 24VDC 2A PPM PROFIsafe; width built 35mm; up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General informationProduct type designation: F-DQ 8x24VDC/2A PPM Possible FW update: Yes Supply voltage Rated value (DC): 24 V Allowable range, lower limit (DC): 19.2 V Allowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Voltage supply required according to NEC class 2: NOInput current Current consumption (nominal value):Current consumption, max.:130 mA; without load Power loss Power loss, typ.: 11 W

Read more less

SIEMENS SIMATIC S7-1500 6ES75261BH000AB0 Digital input module F, F-DI 16x 24VDC PROFIsafe; width built 35mm; up to PL E (ISO 13849-1)/ SIL 3 (IEC 61508) General informationProduct type designation: F-DI 16x24VDCPossible FW update: Yes Supply voltage Rated value (DC): 24 V Permissible range, lower limit (DC): 19.2 V Permissible range, upper limit (DC): 28, 8 VReverse polarity protection: YesVoltage supply required according to NEC class 2: NOInput current Current consumption (nominal value): 50 mA; without loadCurrent consumption, max.: 60 mA; without loadPower loss Power loss, typ.: 4.6 W

Read more less

Siemens Simatic DP, electronics module for ET 6ES71366DB000CA0 Electronics module for ET 200SP, F-DQ 4x24VDC/2A, 15mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508). General informationProduct type designation: F-DQ 4x24VDC/2A PM HFUsable BaseUnits: BU type A0 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Required voltage supply according to NEC class 2: NOInput current Current consumption (nominal value): 75 mA; without loadCurrent consumption, max.: 21 mA; from the backplane bus Power dissipation Power dissipation, typ.: 4 W

Read more less

Siemens Simatic ET 200SP PLC 6ES7132-6BH01-0BA0 Digital output module, DQ 16x 24V DC/0.5A Standard, Source Output (PNP, P-switching) Packaging unit: 1 piece suitable for BU type A0, Color code CC00, substitute value output , Diagnostics module for: Short circuit to L+ and M, wire break, supply voltage General informationProduct type designation: DQ 16x24VDC/0.5A STHardware version: From FS03Firmware version: V0.0● Possible FW update NoUsable BaseUnits: BU type A0Color code for module-specific color coding label: CC00 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC):: 28.8 VReverse protection polarity: Yes Input current Current consumption, max. 60mA; without load Power dissipated Power dissipation, typ. 1 W

Read more less

Siemens Simatic DP, electronics module for ET  6ES71366BA010CA0 Electronics module for ET 200SP, F-DI 8x 24VDC HF, width 15mm, up to PLe (ISO 13849-1)/ SIL 3 (IEC 61508). General informationProduct type designation: F-DI 8x24VDC HFPossible FW update: SI Usable BaseUnits: BU type A0 Color code for module-specific color coding label: CC01 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesVoltage supply required according to NEC class 2: No Input current Current consumption, max.: 40 mA; without load Power dissipated Power dissipation, typ.: 2 W

Read more less

SIEMENS SIMATIC S7-1500 6ES7522-1BL01-0AB0 DQ 32xDC 24V/0.5A HF digital output module; 32 channels in groups of 8; 4A for each group; single channel diagnostics; substitute value, operating cycle counter for the connected actuators. The unit supports the safe disconnection of load groups up to SIL2 according to EN IEC 62061:2021 and category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw or push-in terminals) to be ordered separately. General informationProduct type designation: DQ 32x24VDC/0.5A HFHardware version: From FS02Firmware version: V1.1.0Product function● I&M data: Yes; I&M0 ... I&M3● Isochronous operation: Yes● Prioritized startup: YesEngineering with● STEP 7 TIA Portal configurable/integrated from version: V13 SP1 / -● STEP 7 configurable/integrated from version: V5.5 SP3 / -● PROFIBUS from GSD version/GSD revision: V1.0 / V5.1● PROFINET from GSD version/GSD revision: V2.3 / -Operating mode● DQ: Yes● DQ with power saving function: No● PWM: No● Cam control (switching to comparison values): No● Oversampling: No● MSO: Yes● Integrated switching cycle counter: Yes Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes; by internal protection with 7 A per group Input current Current consumption, max.: 60 mA Power dissipated Power dissipation, typ.: 3.5 W

Read more less

SIEMENS SIMATIC S7-300 6ES73211BL000AA0 Digital input module SM 321, electrically isolated 32DE, 24V DC, 1 x 40-pole. Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 20.4 VAllowable range, upper limit (DC): 28.8 V Input current from backplane bus DC 5 V, max.: 15mA Power dissipated Power dissipation, typ.: 6.5 W

Read more less

SIEMENS SIMATIC DP 6ES7-136-6DC00-0CA0 SIMATIC DP, electronics module ET 200SP, F-DQ 8X24VDC/0.5A PP, width 15mm, up to PL E (ISO 13849) up to SIL 3 (IEC 61508) With the SIMATIC ET 200SP, Siemens offers a distributed, multifunctional I/O system that can be easily put into operation thanks to its space-saving design. It is approved for IP20 protection and designed for installation in a compact distribution box. The system ensures maximum flexibility, allowing modules to be replaced quickly and easily at any time thanks to Multi Hot Swapping. Furthermore, the SIMATIC ET 200SP offers you a wide range of communication channels, both diverse and fast. Thanks to the integration of the IM155-6MF MultiFieldbus interface module, you can always react flexibly and use the optimal protocol for your application, as this function supports different Ethernet protocols. Assembly and service are simplified by a uniform identification system, based on reference identification plates and color-coded pin assignment. Siemens ensures you future-proof systems with the integration of innovative and at the same time long-lasting automation products, in fact as industry experts you are already investing today in the technologies of tomorrow and thus redefining market standards. The continuous availability of data, the flexibility of the application cases and the versatile integration options ensure the excellent performance of the ET 200 products. The scalable and cost-optimized configuration of an ET 200SP station is ensured by the wide range of I/O modules. In addition to digital and analog input and output modules, fail-safe variants are also available for applications up to SIL 3 / PLe. This also applies to integrated motor starters, which are suitable for motors up to 5.5 kW. Energy meters for measuring and analyzing energy consumption, IO-Link master (V1.1.) as well as many other communication and technology modules allow you to adapt the system to every automation task. The accessories available for ET 200SP range from colored and non-coloured reference identification plates to marking labels for individual modules and ensure maximum visibility in the electrical panel. General Information Product type designation: F-DQ 8x24 VDC/0.5 A PP HFFirmware update possible: YesUsable BaseUnits: BU type A0Color code for coding plate a module specification colors: CC02 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesVoltage supply required according to NEC class 2: No Input Current Current consumption (nominal value): 75 mA; without loadCurrent consumption, max.: 21 mA; from the backplane bus Output voltage / header Rated value (DC): 24 V PowerPower draw from backplane bus: 70 mW Power dissipationPower dissipation, typ. 3 W

Read more less

SIEMENS SIMATIC DP (DC 24 V - 21 MA) 6ES7-136-6BA00-0CA0 Electronics module for ET 200SP, F-DI 8x 24VDC HF, 15mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General information Product type designation F-DI 8x24VDC HFUsable BaseUnits BU type A0 Product function● I&M data Yes; I&M0 ... I&M3 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection YesVoltage supply required according to NEC class 2 No Input current Current consumption (nominal value) 75 mA; without loadCurrent consumption, max. 21 mA; from the backplane bus Power Power draw from the backplane bus 70 mW Power dissipated Power dissipation, typ. 4 W

Read more less

SIEMENS SIMATIC ET 200SP   (DC 24 V - 35 mA without load) 6ES71326BF010BA0 Digital output module, DQ 8x 24V DC/0.5A Standard, Source Output (PNP, P-switching) Packaging unit: 1 piece suitable for BU type A0, Color code CC02, substitute value output , Diagnostics module for: Short circuit to L+ and M, wire break, supply voltage. General information:Product type designation: DQ 8x24VDC/0.5A STHardware version: From FS02Firmware version: V0.0Possible FW update: NoUsable BaseUnits: BU type A0Color code for module-specific color coding label: CC02 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YES Input current Current consumption (nominal value): 35 mA; without load Power dissipated Power dissipation, typ.: 1 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES7131-6BH01-0BA0 Digital input module, DI 16x 24V DC Standard, Input type 3 (IEC 61131), Sink Input, (PNP, read on P). Packaging unit: 1 piece suitable for BU type A0, Color code CC00, Input delay 0.05..20ms; Diagnostics module for: wire break, supply voltage General Information: Product type designation: DI 16x24VDC STHardware version: From FS02Firmware version: V0.0Possible FW update: NoUsable BaseUnits: BU type A0Color code for module-specific color coding plate: CC00 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Input Current Current consumption, max:. 90 mA

Read more less

SIEMENS SIMATIC ET 200SP 6ES7131-6BF01-0BA0 Digital input module, DI 8x 24VDC Standard, Input type 3 (IEC 61131), Sink Input, (PNP, read on P), Packaging unit: 1 piece suitable for BU type A0, Color code CC01, Input delay 0.05..20ms; Diagnostics module for: short circuit in encoder supply, wire break, supply voltage. General information Product type designation: DI 8x24 VDC ST Hardware version: From FS02Firmware version: V0.0● Possible FW update: NoUsable BaseUnits: BU type A0Color code for specific color coding label of module: CC01 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Transducer power supply Number of outputs 8Output voltage, min. 19.2 VShort circuit protection Yes; per moduleTransducer supply 24 V● 24 V Yes● Short-circuit protection Yes● Output current, max. 700 mA● Output current per channel, max. 700 mA● Output current per module, max. 700 mA Power dissipationPower dissipation, typ. 1W; 24 V, 8 inputs powered by the transducer power supply

Read more less

SIEMENS SIMATIC S7-1200 6ES72231BL320XB0 Digital I/O SM 1223, 16DI/16DO, 16DI DC 24V, Sink/Source, 16DO, Transistor 0.5A . General informationProduct type designation: SM 1223, DI 16x24 VDC, DQ 16x24 VDC Supply voltage Rated value (DC): 24 V Allowable range, lower limit (DC): 19.2 V Allowable range, upper limit (DC): 28.8 V Input current from backplane bus DC 5 V, max..: 185 mADigital inputs from load voltage L+ (without load), max.: 4 but; per channel Power Active power absorbed, tip: 4.5 W

Read more less

SIMATIC ET 200SP 6ES71316BF000CA0 Digital input module, DI 8x DC 24V High Feature, Input type 3 (IEC 61131), Sink Input, (PNP, read on P), Packaging unit: 1 piece suitable for BU type A0, Color code CC01 , Input delay 0.05..20ms; Channel diagnostics for: short circuit in encoder supply, wire break, supply voltage, channel error LED . General informationProduct type designation: DI 8x24 VDC HFHardware version: From FS07Possible FW update: YesUsable BaseUnits: BU type A0Color code for module-specific color coding label:CC01 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Power dissipated Power dissipation, typ.: 1.5 W; 24 V, 8 inputs powered by transducer power supply

Read more less

SIEMENS SIMATIC S7-1200 6ES7223-1BH32-0XB0 SIMATIC S7-1200, digital I/O SM 1223, 8 DI/8 DO, 8 DI DC 24V, Sink/Source, 8 DO, Transistor 0.5A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs. General Information Product type designation: SM 1223, DI 8x24 VDC, DQ 8x24 VDC Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 20.4 VAllowable range, upper limit (DC): 28.8 V Input current from backplane bus DC 5 V, max. 145 mADigital inputs from load voltage L+ (without load), max. 4 mA; for channel Dissipated Power Power dissipation, typ. 2.5 W

Read more less