Siemens 6DL11316DF000PK0 SIMATIC ET 200SP HA, Digital input module, DI 8X24 ... 125VDC HA suitable for Terminal Block K0, color code CC42, channel diagnostics

Read more less

Siemens 6ES72221BF220XA0 ***spare part*** SIMATIC S7-200, digital output module EM 222, only for CPU S7-22X, 8DA, DC 24V Technical dataSupply voltageLoad voltage L+● Rated value (DC) 24 V● Permissible range, lower limit (DC) 20.4 V● Permissible range, upper limit (DC) 28.8 VInput currentfrom backplane bus DC 5 V, max. 50 mAPower dissipationPower dissipation, typ. 2 WDigital outputsNumber of outputs 8Short-circuit protection NoLimitation of the inductive opening voltage on L+ (-48 V)Output voltage● for signal "1", min. 20 VOutput current● for signal "1" rated value 0.75 A● for signal "1" permissible range for 0 ... 55 °C, max. 750 mA● for signal "0" residual current, max. 10 µAParallel connection of two outputs● for power increase YesTotal current of outputs (per group)all installation positions— up to 40 °C, max. 3 A— Maximum for each conductor/group, max. 3 AHorizontal mounting position— up to 55 °C, max. 3 ARelay outputsContact breaking capacity— with inductive load, max. 0.75 A— with lamp load, max. 5 W—with ohmic load, max. 0.75 A  

Read more less

Siemens 6ES73231BL000AA0SIMATIC S7-300, digital module SM 323, electrically isolated, 16 DI and 16 DO, 24V DC, 0.5A, total current 4A, 1 x 40 poles

Read more less

Siemens 6ES72230BD300XB0SIMATIC S7-1200, digital I/O SB 1223, 2 DI/2 DO, 2 DI DC 24V/2 DO DC 24V SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. If you need to expand your SIMATIC S7-1200 CPU with only a few inputs or outputs, Signal Boards are a valid alternative to input and output modules. The Signal Boards are inserted directly on the front of the controller (also possible with CPU 1211C) and are available as analogue or digital inputs and outputs and mixed modules. A Communication Board with RS 485 interface is also available. The Signal Boards also allow subsequent expansion of the configuration without requiring additional space in the control cabinet.

Read more less

Siemens 6ES73221BH010AA0SIMATIC S7-300, digital output module SM 322, electrically isolated, 16DA, 24V DC, 0.5A, 1 x 20-pole, total current 4A/ group (8A/unit)

Read more less

Siemens 6ES73211BH020AA0SIMATIC S7-300, digital input module SM 321, electrically isolated, 16 DE, 24V DC, 1 x 20-pole

Read more less

Siemens 6AG12231BH322XB0SIPLUS S7-1200 SM 1223 8DI/8DQ -25 ... +70 °C, with Conformal Coating based on 6ES7223-1BH32-0XB0 . SM 1223 digital input and output module, 8 DI/8 DO, 8 DI DC 24 V, Sink/Source 8 DO, transistor 0.5 A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs. Like the CPU, the digital input and output modules are also protected against extreme environmental conditions. Thanks to 100% Conformal Coating they resist biologically, chemically and mechanically active substances, condensation, frost and harmful gases. Digital signals are reliably acquired under all conditions.

Read more less

Siemens 6ES7-321-1BL00-0AA0 SIMATIC S7-300, digital input module SM 321, electrically isolated 32DE, 24V DC, 1 x 40-pole

Read more less

Siemens 6ES75211BH100AA0SIMATIC S7-1500, digital input module, DI 16xDC 24V BA, 16 channels in groups of 16, input delay typ. 3.2 ms, input type 3 (IEC 61131) scope of delivery incl. push-in front connector SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ES75231BL000AA0SIMATIC S7-1500 digital input and output module, DI16x 24VDC BA, 16 channels in groups of 16, input delay typ. 3.2 ms input type 3 (IEC 61131), DQ16XDC 24V/0.5A BA 16 channels in groups of 8 4A per group the unit supports the safe disconnection of load groups up to SILCL1 according to EN 62061:2005 + A2:2015, and category 2 / PL c according to EN ISO 13849-1:2015. supply incl. push-in front connector SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ES72221BD300XB0SIMATIC S7-1200, digital output module SB 1222, 4DQ, DC 24V 200kHz SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. If you need to expand your SIMATIC S7-1200 CPU with only a few inputs or outputs, Signal Boards are a valid alternative to input and output modules. The Signal Boards are inserted directly on the front of the controller (also possible with CPU 1211C) and are available as analogue or digital inputs and outputs and mixed modules. A Communication Board with RS 485 interface is also available. The Signal Boards also allow subsequent expansion of the configuration without requiring additional space in the control cabinet.

Read more less

Siemens 6ED10551FB100BA2LOGO! DM16 230R expansion module, SV/I/O: 230V/230V/relay, 4UM, 8 DE/8 DA for LOGO! 8 The LOGO! expansion modules allow you to create a LOGO! very personalized. A LOGO! basic device 8 can be expanded up to max. 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs. For this purpose, ten different expansion modules are available which allow the addition of digital or analog inputs and outputs with different input voltages.

Read more less

Siemens 6ES72221BF320XB0SIMATIC S7-1200, digital output module SM 1222, 8 DO, DC 24V, Transistor 0.5A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs.

Read more less

Siemens 6ES72231PL320XB0SIMATIC S7-1200, digital I/O SM 1223, 16DI/16DO, 16DI DC 24V, Sink/Source, 16DO, Relay 2A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs.

Read more less

Siemens 6ES75221BH010AB0SIMATIC S7-1500, digital output module DQ 16xDC 24V/0.5A HF 16 channels in groups of 8 4A for each group single channel diagnostics substitute value: counter of operating cycles for the connected actuators. The unit supports the safe disconnection of load groups up to SILCL2 according to EN 62061:2005 + A2:2015, and category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ES75221BL100AA0SIMATIC S7-1500, digital output module, DQ32xDC 24V/0.5A BA, 32 channels in groups of 8, 4A per group the module supports shutdown in load group safety up to SILCL2 according to EN 62061:2005 + A2:2015, and category 3 / PL d according to EN ISO 13849-1:2015. supply incl. push-in front connector SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ES75211BL100AA0SIMATIC S7-1500, digital input module, DI 32xDC 24V BA, 32 channels in groups of 16, input delay typ. 3.2 ms, input type 3 (IEC 61131) scope of delivery incl. push-in front connector SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ED10551CB100BA2LOGO! DM16 24 expansion module, SV/I/O: DC 24 V/DC 24 V/trans., 8 DI/8 DO, 4TE for LOGO! 8 The LOGO! expansion modules allow you to create a LOGO! very personalized. A LOGO! basic device 8 can be expanded up to max. 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs. For this purpose, ten different expansion modules are available which allow the addition of digital or analog inputs and outputs with different input voltages.

Read more less

Siemens 6ES75221BH100AA0SIMATIC S7-1500, digital output module, DQ16xDC 24V/0.5A BA, 16 channels in groups of 8, 4A per group, module supports shutdown in load group safety up to SILCL2 according to EN 62061:2005 + A2:2015, and category 3 / PL d according to EN ISO 13849-1:2015. supply incl. push-in front connector SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ED10551MB000BA2LOGO! DM8 12/24R expansion module, SV/I/O: 12, 24V/12V/24V/relay, 2TE, 4 DE/4 DA for LOGO! 8 The LOGO! expansion modules allow you to create a LOGO! very personalized. A LOGO! basic device 8 can be expanded up to max. 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs. For this purpose, ten different expansion modules are available which allow the addition of digital or analog inputs and outputs with different input voltages.

Read more less

Siemens 6ES72221HF320XB0SIMATIC S7-1200, digital output module SM 1222, 8 DO, Relay 2A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs.

Read more less

Siemens 6ES72221BH320XB0SIMATIC S7-1200, digital output module SM 1222, 16DO, DC 24V, Transistor 0.5A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various options of communication. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs.

Read more less

Siemens 6ES72231PH320XB0SIMATIC S7-1200, digital I/O SM 1223, 8 DI/8 DO, 8 DI DC 24V, Sink/Source, 8 DO, Relay 2A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs.

Read more less

Siemens 6ES75211BH000AB0SIMATIC S7-1500, DI 16xDC 24V HF digital input module, 16 channels in groups of 16 of which 2 inputs can be used for input delay count 0.05.. 20ms input type 3 (IEC 61131) hardware interrupt diagnostics: front connector (screw terminals or push-in) to be ordered separately SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages of the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less