Schneider Electric is a company specializing in energy management and automation, present in over 100 countries. It offers integrated solutions for various market segments.
The company's objective is to allow everyone to make the best use of energy and resources, combining progress and sustainability.
At Schneider they call this philosophy Life Is On
Schneider-Electric Vigipact 200/440VAC 4P NSX250 LV429493 This is a Vigi differential module for the ComPact NSX 250 which provides earth leakage protection. It is used for 4 pole circuit breakers. PresentationProduct range"ComPacT NSX100...250 new generation""ComPact NSX100...250"Device nameVigiPacTProduct typeVigi add-onApplicationWiringRange compatibility"ComPacT new generation" "ComPacT NSX250 new generation" switch automaticCompact "ComPact NSX250" circuit breakerNumber of poles 4PRated current [In] 250 AType of differential protectionClass AClass ACType of residual differential sensitivity adjustmentAdjustabledifferential sensitivity0.03 A for class A0.1 A for class A0.3 A for class A0.5 A for class A1 A for class A3 A for class A10 A for class AC30 A for class ACResidual earth fault delay adjustment typeAdjustableResidual differential timing adjustment [Δt]0 ms60 ms150 ms300 ms500 ms800 ms1.2 s4 sTechnical characteristicsNetwork typeCAMains frequency50/ 60 Hz[Ue] rated operational voltage200...440 V AC 50/60 Hz conforming to IEC 60947-2differential protectionWith maximum interruption time800 ms overvoltage category IVEnvironmentProtection class against electrical dischargesClass II
€545,99
Schneider Electric TM3 module - 4 temperature inputs TM3TI4 The product is part of the Modicon TM3 range, an offering of expansion I/O modules for Modicon M221, M241, M251 and M262. The analog input module provides 4 x 16-bit inputs and 15-bit + sign resolution. PresentationProduct rangeModicon TM3Product typeAnalog input modulerange compatibilityModicon M221 Modicon M241Modicon M251Modicon M262 - Modicon M241 - Modicon M251number of analogue inputs 4Type of analogue inputCurrent 4...20 mAcurrent 0...20 mAvoltage 0...10 Vvoltage - 10...10 Vthermocouple -200...1000°C with thermocouple J thermocouple - 200...1300°C with thermocouple Kthermocouple 0...1760°C with thermocouple Rthermocouple 0...1760°C with thermocouple Sthermocouple 0...1820° C with thermocouple Bthermocouple - 200...400°C with thermocouple Tthermocouple - 200...1300°C with thermocouple Nthermocouple -200...800°C with thermocouple Ethermocouple 0...2315°C with thermocouple CNi 100/Ni 1000 temperature probe - 60...180 °CPt 100 temperature probe - 200...850 °CPt 1000 temperature probe - 200...600 °CTechnical characteristicsanalog input resolution 16 bit15 bit + signContinuous overload permitted13 V, analog input type: voltage40 mA, analog input type: currentInput impedance>= 1 MOhm voltage>= 1 MOhm thermocouple>= 1 MOhm temperature probeLSB value2.44 mV 0...10 V voltage4.88 mV - 10. ..10 V voltage4.88 µA 0...20 mA current3.91 µA 4...20 mA current0.1 °C temperature probe0.1 °C thermocoupleConversion time100 ms + 100 ms per channel + 1 controller cycle time thermocouple100 ms + 100 ms per channel + 1 controller cycle time temperature probe10 ms + 10 ms per channel + 1 controller cycle time voltage/currentsampling duration10 ms, analog input type: voltage/current100 ms, analog input type: voltage/current100 ms, analog input type: thermocouple100 ms, analog input type: temperature probe
€135,99
Schneider-Electric Safety module Cat.1 NC/NC XPSUAB11CP Cat.1 safety module NC/NC, NO/NC free from power. and PNP/PNP 24V screw m. The product is part of the XPS Universal range of security modules. The safety relay is designed for monitoring emergency stops, antivalent contacts, safety, magnetic or proximity switches, PNP sensors, RFID safety switches, safety barriers or two-hand controls. Technical dataProduct rangeHarmony Safety AutomationProduct typeSafety modulename safety moduleXPSUABsafety module applicationFor monitoring 2-hand controlFor application with contacts in switchingFor emergency monitoring, protection and barriersMonitored antivalent contactsModule functionEmergency stop monitoring 1 channelMobile protection monitoring 1 channel 1 PNP sensor monitoringType IIIA two-hand control controlMagnetic switch monitoringSafety barrier controlSafety RFID switch controlSafety barrier monitoring (ESPE)Proximity sensor monitoringSecurity levelCan reach PL c/category 1 compliant with ISO 13849-1Can reach SILCL 1 compliant with IEC 62061Can achieve SIL1 compliant with IEC 61508Safety reliability dataMTTFd >= 30 years compliant with ISO 13849-1Dcavg PFHd = 1177E-09 1/h conforming to ISO 13849-1HFT = 0 conforming to IEC 62061PFHd = 1177E-09 1/h conforming to IEC 62061SFF > 60 % conforming to IEC 62061HFT=0 conforming to IEC 61508-1PFHd = 1177E-09 1/h conforming to IEC 61508-1SFF > 60% conforming to IEC 61508-1 Type = B conforming to IEC 61508-1network topologyDouble NCDouble PNPDouble antivalentDouble OSSD connections - terminalsRemovable screw terminal block, 0.2...2.5 mm² solid or flexibleRemovable screw terminal block, 0.25...2.5 mm² flexible with single conductor ferruleRemovable screw terminal block, 0.2...1.5 mm² solid or flexible double conductorRemovable screw terminal block, 2 x 0.25...1 mm² flexible with ferrule without cable end, with maskRemovable screw terminal block, 2 x 0.5...1.5 mm² flexible with ring nut with cable end, with maskRated supply voltage [Us]24 V AC - 15...10 %24 V DC - 20...20 % synchronization time between inputs0.5 s2.2 sstarting typeAutomatic/manual/monitoredpower absorbed in W1.5 W 24 V DCpower consumption in VA3.5 VA 24 V AC 50/60 Hztype of input protection Internal, electronicsafety outputs1 C/Osafety inputs1 safety input 24 V DC 5 mA maximum wire resistance500 Ohminput compatibilityNormally closed circuit compliant with ISO 14119XC limit switch compliant to ISO 14119Mechanical contact conforming to ISO 14119Normally closed loop conforming to ISO 13850Dual antivalent conforming to ISO 14119Dual OSSD conforming to IEC 61496-1-2Two-controlled hands compliant with EN 574/ISO 13851-III A3-wire PNP proximity sensorsRated operational current [Ie]5 A AC-1 per contact relay NO3 A AC-15 for relay contact NO5 A DC-1 for relay contact NO3 A DC-13 for relay contact NO3 A AC-1 for relay contact NC 1 A AC-15 for NC relay contact2 A DC-1 for NC relay contact1 A DC-13 for NC relay contactControl Outputs 2 configurable on/off pulsed outputinput/output typePulsed semiconductor signaling output. 24V DC, 20mA Z1, non-safety related Conventional thermal current in air [Ith]3 Aassociated fuse rating6 A gG for IEC compliant relay output 60947-1minimum output current10 mA per relay outputminimum output voltage15 V per output relaymaximum input response time20 msRated insulation voltage [Ui]250 V (degree pollution 2) conforming to IEC 60947-1Rated impulse withstand voltage [Uimp]4 kV overvoltage category II conforming to IEC 60947-1local signalingLED (green)Power ON:LED (red)error:LED (yellow)start:LED (yellow)darkness status:LED (yellow)safety input S12:LED (yellow)safety input S13:Installation35 mm symmetrical DIN raildepth120 mmAmbient temperature-25…55 °Cheight 100 mmwidth22.5 mmproduct weight0.200 kg
€113,99
Schneider-Electric Energy sensor, PowerTag Flex (free mounting) 160A 3P/3P+N upper and lower position energy, PowerTag Flex (free mounting) 160A 3P/3P+N upper and lower position A9MEM1580 PowerTag Energy F160 3P/3P+N is an energy sensor for wireless communication. With its Flex design, it is dedicated to 3P and 3P+N devices, with 25 to 27 mm pitch between phases, with rated current up to 160 A. PresentationProduct rangePowerLogicProduct namePowerTag F160Product type Monitoring sensorPoles3P3P + NMaximum current [Imax]160 Aproduct for specific applicationsEnergy managementOverload alarmPower factorLoad monitoringCircuit monitoringconcentrator compatibilityActi9 PowerTag Link CActi9 PowerTag LinkActi9 PowerTag Link HDHarmony Hub"EcoStruxure Panel Server Universal""EcoStruxure Panel Server Advanced"PrismaSet Activerange compatibilityActi9 Acti9 C120Acti9 Acti9 NG125 Compact Compact NSXmTeSys TeSys GV4Compact ComPacT INSActi9 Acti9 iSWActi9 Acti9 iSW-NAActi9 Acti9 iIDPowerPact PowerPact Bmeasurement type Active and reactive energyApparent energyActive and reactive powerApparent powerCurrentVoltagePower factorInternal temperatureFrequencyaccuracy classClass 1 active energy conforming to IEC 61557-12Class 2 reactive energy conforming to IEC 61557-12Class 2 apparent energy conforming to IEC 61557- 12Class 1 active power conforming to IEC 61557-12Class 2 reactive power conforming to IEC 61557-12Class 2 apparent power conforming to IEC 61557-12Class 1 current conforming to IEC 61557 -12Class 0.5 voltage conforming to IEC 61557-12Class 1 power factor conforming to IEC 61557-12Class 0.5 frequency conforming to IEC 61557-12
€236,20
Schneider-Electric 24V 2.5A modular power supply ABLM1A24025 The ABLM regulated switching power supply (SMPS) provides direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 2.5A at 24V DC and a rated power output of 60W. It is ideal for providing the DC voltage needed for automation equipment designed for industrial applications , commercial and residential. PresentationProduct rangeModicon Power SupplyProduct typePower supplypower supply typeSwitching modeVariant optionModularNominal input voltage100...240 V AC single phase100...240 V AC phase to phasenominal power in W 60 Woutput voltage 24 V DCoutput power supply current 2.5 ATechnical characteristicsinput voltage limits90...264 V ACInput protection typeIntegrated fuse (non-replaceable) 3.15 AExternal protection (recommended) 20 A Curve BExternal protection (recommended) 20 A Curve CExternal protection (recommended) 10 A Curve BExternal protection (recommended) 6 A Curve CInrush current30 A at 115 V60 A at 230 V18 mm modules0.50 at 115 V AC0.39 at 230 V ACefficiency90 % at 115 V AC90 % at 230 V ACpower dissipated in W 6.5 Wcurrent absorptionTurn-on time Holding time> 20 ms 115 V AC> 60 ms 230 V ACStartup with capacitive loads3000 µFresidual ripplemean time between failures (MTBF)1300000 H at 25 °C, full load700000 H at 55 °C, 80 % loadoutput protection type Against overload and short circuits, protection technology: automatic resetAgainst over temperature, protection technology: manual resetAgainst overvoltage, protection technology: manual resetconnections - terminalsConnection to screw: 0.5...2.5 mm², (AWG 20...AWG 14) without wire end ferrule for outputScrew connection: 0.5...1.5 mm², (AWG 20. ..AWG 16) with wire end ferrule for outputScrew connection: 0.5...1.5 mm², (AWG 20...AWG 16) for inputline and load regulation Status LED1 LED (green) output voltagedepth55.6 mmheight 91 mmwidth53 mmproduct weight0.221 kgoutput connectionSerialParallelmounting supportTop hat type TH35 -15 rail conforming to IEC 60715Top hat type TH35-7.5 rail conforming to IEC 60715Double profile DIN railpanel mountingpower supplySELV conforming to IEC 60950-1 SELV compliant with IEC 60204-1SELV compliant with IEC 60364-4-41dielectric strength3000 V AC input / output
€97,99
Schneider-electric Differential lock A9Y80625 Acti9 Vigi iC40 is a modular additional residual current device. It is a 1P+N and the rated current is 25 A. The earth leakage protection class is type A with 30 mA sensitivity and voltage independent technology. PresentationRangeActi9Product typeResidual current add-on devicesDevice nameVigi iC40Range compatibilityActi9 Acti9 iC40Number of poles1P + Nneutral positionLeftRated current [In ]25 AType of networkCAdifferential sensitivity30 mADifferential protection timingInstantaneoustype of differential protectionType AProduct certificationsCEquality marksIMQOVETechnical characteristicsdevice position in the systemStarting pointMains frequency50/60 HzRated operational voltage [Ue]230 V AC 50/60 Hzresidual current release technology "Voltage independent"Rated insulation voltage [Ui]400 V AC 50/60 Hz conforming to CEI EN 61009-2-1Rated withstand voltage impulse [Uimp]4 kV compliant with CEI EN 61009-2-1Local signalingFault indicationInstallationCouplingInstallationDIN railelectrical connection to the circuit breakerBy screwspitch 9 mm 2height 95 mmwidth 36 mmdepth 74 mmproduct weight 90 gColour White
€115,99
Schneider Electric processor M340 20 modbus ethernet BMXP342020 The processor module is part of the Modicon M340 automation platform range. This high-performance processor module allows for up to 4 racks, 1,024 I/O and has a memory capacity of 4,096 KB. PresentationProduct rangeModicon M340 programmable controllersProduct typeProcessor moduleconceptTransparent Ready CANopennumber of racks 4number of slots on a single rack 11digital I/O processor capacity1024 I/O multi-rack configuration704 I/O rack configuration singleanalog I/O processor capacity.256 I/O multi-rack configuration66 I/O single rack configurationnumber of channels for specific applications 36MonitoringModbus diagnostic countersModbus event countersTechnical characteristicscontrol channelsProgrammable circuitstype of integrated connectionNon-isolated serial connection RJ45 character mode, transmission mode: asynchronous on baseband, RS232C, transmission mode: 2 shielded pairs at 0.3...19.2 kbit/s full duplexNon-isolated serial link RJ45 character mode, transmission mode : asynchronous on baseband, RS485, transmission mode: 1 shielded twisted pair at 0.3...19.2 kbit/s half duplexNon-isolated serial link RJ45, master/slave Modbus, RTU/ASCII, control mode transmission: asynchronous on baseband, RS232C, transmission mode: 1 shielded twisted pair at 0.3...19.2 kbit/s half duplexNon-isolated serial link RJ45, master/slave Modbus, RTU/ASCII, mode transmission: asynchronous on baseband, RS485, transmission mode: 1 shielded twisted pair at 0.3...19.2 kbit/s half duplexUSB port at 12 Mbit/sEthernet TCP/IP RJ45, transmission mode: 1 twisted pair at 10/100 Mbit/smax number of networks2 Ethernet communication module4 AS-Interface moduleembedded communication serviceBandwidth Management, Ethernet TCP/IPData Editor, Ethernet TCP/IPModbus TCP Messaging, Ethernet TCP/IPRack Viewer, Ethernet TCP/IPNetwork Administrator SNMP, Ethernet TCP/IPEthernet port10BASE-T/100BASE-TXnumber of devices per segment0…32 (character mode)0…32 (Modbus )number of devices2 point-to-point character mode2 point-to-point Modbus
€581,99
Schneider-Electric power link-TCP/IP WLESS 20POWERTAG A9XMWD20 This Acti9 PowerTag Link is an intelligent wireless communication module to Modbus TCP/IP concentrator. Must be paired with a PowerTag wireless communication energy sensor to provide circuit monitoring and diagnosis down to load level. Presentationrange of productActi9Product nameActi9 PowerTag LinkProduct typeIntelligent communication moduleDevice namePowerTag LinkApplication typeBasic measurement Energy EAdvanced load monitoring E, U, I, P, PFLoad alarmMax number of connected devicesUp to 20 wireless devicesmaximum current supplied 2 ANominal supply voltage [Us]110... 230 V AC +/- 15 %connectivity to devicesWireless monitoring sensorcommunication serviceEthernet Modbus TCP/IP serverWeb server web serverIntegrated web pageBMS compatibletransmission support mediumRadio frequency 2.4…2.4835 GHz PowerTag 20web servicesWeb page Technical characteristicsSpecific application I/OTotal pulse counterabsorbed power VA 5 VAImmunity to microinterruptions 10 ms
€132,75
Schneider Electric Power supply with comm. regulated - 1 or 2 phases - 100..240 V AC - 24 V - 20 A ABL8RPM24200 PresentationProduct rangeModicon Power SupplyProduct typePower supplypower supply typeSwitching modeNominal input voltage100...120 V AC single phase, terminals: N-L1200...240 V AC phase to phase, terminals: L1-L2nominal power in W480 Woutput voltage24 V DCoutput power supply current20 Aadmissible temporary current amplification1.5 x In (for 4 s )anti-harmonic filterLow frequency harmonic currentsTechnical characteristicsinput voltage limits85...132 V AC170.. .264 V ACinrush current30 A18 mm modules0.68 at 240 V AC0.69 at 120 V ACefficiency88 % Output voltage adjustment24...28.8 V adjustablepower dissipated in W57.6 Wequipment suppliedPower factor corrector filter compliant with IEC 61000-3-2output protection typeAgainst overload, protection technology: manual or automatic resetAgainst overvoltage, protection technology: 30...32 V, manual resetAgainst short circuits, protection technology: manual or automatic resetAgainst undervoltage, protection technology: tripping with U Thermal, protection technology: automatic reset connections - terminalsRemovable screw terminal block: 2 x 2.5 mm², for diagnostic relayScrew terminal blocks: 3 x 0.5...3 x 4 mm², (AWG 22 ...AWG 12) for input connectionScrew terminal blocks: 1 x 0.5...1 x 4 mm², (AWG 22...AWG 12) for input earth connectionTerminal blocks screw: 4 x 0.5...4 x 4 mm², (AWG 22...AWG 12) for output connectionStatus LED1 LED (green and red) output voltage1 LED (green, red and orange) output currentdepth145 mmheight125 mmwidth146 mmproduct weight1.6 kg output connectionSeriesParallelmarkingCEmounting support35 x 7.5 mm symmetrical DIN rail35 x 15 mm symmetrical DIN railoperating positionVerticalpower supplySELV conforming to IEC 60950-1SELV conforming to IEC 60204-1SELV conforming to IEC 60364-4-41 dielectric resistance2500 V with between input and ground insulation3000 V with between input and output insulation500 V with between output and ground insulation
€187,99
Schneider-Electric Standard dual Ethernet communicator STBNIP2311 The product is part of the Modicon STB modular distributed I/O range. The standard network interface module has 1 main segment and up to 6 extension segments. It is an interface module with a nominal supply voltage of 24V DC, a maximum supply current of 700 A, an output voltage of 5.25V DC and an output current of 1.2 A. General information:Modicon STB Distributed I/O SolutionProduct typeStandard Network Interface ModuleIntegrated connection typeModbus Ethernet TCP/IP compliant with IEEE 802.3 2 RJ45 female double shielded twisted pair via Ethernet (network)Modbus Ethernet TCP/IP compliant with IEEE 802.3 HE-13 (RS232 port)IEEE 802.3 compliant Modbus Ethernet TCP/IP female 8-way (RS232 port) Ethernet port10BASE-T/100BASE-Texchange modeHalf duplex or full duplexnumber of segments1 main and max 6 extensionstransmission speed10/100 Mbit/s for bus length of 0…100 m per segment Type of structureIndustrial LANEthernet Modbus TCP/IP network Technical featuresNumber of addressable I/O modules0…32 per islandcommunication serviceSNMP agentBootP/DHCP protocolModbus TCP/IP MessagingEmbedded Web (configuration, diagnostics and variable access)Rated supply voltage [Us]24V DC Power supply typeSELVmaximum current supplied700 APower supply voltage limits19.2…30Vinput current550 mA for power circuitRated output current0.575 A at 60…70 °C1.2 Aoutput voltage5.25 V DC (tolerance: +/-0.21%) for logic busCE markingOvervoltage category IIStatus LED1 LED ACT1 Island status LED (RUN)1 Module error LED (ERR)1 LED MS1 NS LED1 Power LED (PWR)1 LED test mode (TEST)depth70 mmheight40.5mmlength130mmProduct weight0.145 kg
€331,99
Schneider electric ATV12 speed variator - 0.37 kW - 0.55 HP - 200-240 V 1ph - c/diss.term. ATV12H037M2 The Schneider Electric Altivar 12 variable speed drive is capable of powering single-phase asynchronous motors with rated power up to 0.37 kilowatts/0.55 horsepower and rated voltage from 200 to 240 Vac. This variable speed/frequency drive (VSD / VFD) is designed for simple industrial and commercial machines and appliances, such as conveyor belts, pumps, extractors, access barriers and rolling mills. Its small footprint allows simple non-industrial equipment to be mounted in cabinets. It can be set up first while still inside its packaging without using the power supply, minimizing setup time. SoMove software compatibility saves and transfers configurations to spare, reducing maintenance downtime. Technical characteristicsNumber of digital inputs: 4Number of digital outputs: 2Number of analogue inputs: 1Number of analogue outputs: 1Number Relay Output: 1Interface: 2 RS 485 cablesConnector Type: 1 RJ45Continuous Output Current: 2.4A at 4kHzAccess Method: Serial Modbus Server Speed Variator Output Frequency: 0.5…400 HzSpeed Range: 1…20Sampling Duration: 20 ms, tolerance +/- 1 ms for logic input10 ms for analog inputLinearity Error: +/-0.3% of maximum value for analog input
€136,20
SCHNEIDER ELECTRIC Interface conventional buttons 4 channels MTN670804 Button interface, 4 channels plus. Generates an internal signal voltage for connecting 4 conventional buttons or floating contacts and for connecting 4 low-current LEDs. The cores have a length of 30 cm and can be extended to a maximum of 7.5 m. Technical dataTechnical characteristicsMarketResidentialSmall tertiary sector Product rangeKNXIP20 AssemblyCash in number of inputs4 Type of EntranceTrack
€72,75
