Description
Schneider-Electric Safety module Cat.1 NC/NC XPSUAB11CP
Cat.1 safety module NC/NC, NO/NC free from power. and PNP/PNP 24V screw m. The product is part of the XPS Universal range of security modules. The safety relay is designed for monitoring emergency stops, antivalent contacts, safety, magnetic or proximity switches, PNP sensors, RFID safety switches, safety barriers or two-hand controls.
Technical data
Product range
Harmony Safety Automation
Product type
Safety module
name safety module
XPSUAB
safety module application
For monitoring 2-hand control
For application with contacts in switching
For emergency monitoring, protection and barriers
Monitored antivalent contacts
Module function
Emergency stop monitoring 1 channel
Mobile protection monitoring 1 channel
1 PNP sensor monitoring
Type IIIA two-hand control control
Magnetic switch monitoring
Safety barrier control
Safety RFID switch control
Safety barrier monitoring (ESPE)Proximity sensor monitoring
Security level
Can reach PL c/category 1 compliant with ISO 13849-1
Can reach SILCL 1 compliant with IEC 62061Can achieve SIL1 compliant with IEC 61508
Safety reliability data
MTTFd >= 30 years compliant with ISO 13849-1
Dcavg < 60 % compliant with ISO 13849 -1
PFHd = 1177E-09 1/h conforming to ISO 13849-1
HFT = 0 conforming to IEC 62061
PFHd = 1177E-09 1/h conforming to IEC 62061
SFF > 60 % conforming to IEC 62061
HFT=0 conforming to IEC 61508-1
PFHd = 1177E-09 1/h conforming to IEC 61508-1
SFF > 60% conforming to IEC 61508-1
Type = B conforming to IEC 61508-1
network topology
Double NC
Double PNP
Double antivalent
Double OSSD
connections - terminals
Removable screw terminal block, 0.2...2.5 mm² solid or flexible
Removable screw terminal block, 0.25...2.5 mm² flexible with single conductor ferrule
Removable screw terminal block, 0.2...1.5 mm² solid or flexible double conductor
Removable screw terminal block, 2 x 0.25...1 mm² flexible with ferrule without cable end, with mask
Removable screw terminal block, 2 x 0.5...1.5 mm² flexible with ring nut with cable end, with mask
Rated supply voltage [Us]
24 V AC - 15...10 %
24 V DC - 20...20 %
synchronization time between inputs
0.5 s
2.2 s
starting type
Automatic/manual/monitored
power absorbed in W
1.5 W 24 V DC
power consumption in VA
3.5 VA 24 V AC 50/60 Hz
type of input protection
Internal, electronic
safety outputs
1 C/O
safety inputs
1 safety input 24 V DC 5 mA
maximum wire resistance
500 Ohm
input compatibility
Normally closed circuit compliant with ISO 14119
XC limit switch compliant to ISO 14119
Mechanical contact conforming to ISO 14119
Normally closed loop conforming to ISO 13850
Dual antivalent conforming to ISO 14119
Dual OSSD conforming to IEC 61496-1-2
Two-controlled hands compliant with EN 574/ISO 13851-III A
3-wire PNP proximity sensors
Rated operational current [Ie]
5 A AC-1 per contact relay NO
3 A AC-15 for relay contact NO
5 A DC-1 for relay contact NO
3 A DC-13 for relay contact NO
3 A AC-1 for relay contact NC
1 A AC-15 for NC relay contact
2 A DC-1 for NC relay contact
1 A DC-13 for NC relay contact
Control Outputs
2 configurable on/off pulsed output
input/output type
Pulsed semiconductor signaling output. 24V DC, 20mA Z1, non-safety related
Conventional thermal current in air [Ith]
3 A
associated fuse rating
6 A gG for IEC compliant relay output 60947-1
minimum output current
10 mA per relay output
minimum output voltage
15 V per output relay
maximum input response time
20 ms
Rated insulation voltage [Ui]
250 V (degree pollution 2) conforming to IEC 60947-1
Rated impulse withstand voltage [Uimp]
4 kV overvoltage category II conforming to IEC 60947-1
local signaling
LED (green)Power ON:
LED (red)error:
LED (yellow)start:
LED (yellow)darkness status:LED (yellow)safety input S12:
LED (yellow)safety input S13:
Installation
35 mm symmetrical DIN rail
depth
120 mm
Ambient temperature
-25…55 °C
height
100 mm
width
22.5 mm
product weight
0.200 kg
