SCHNEIDER ELECTRIC INDUSTRIAL AUTOMATION

Schneider-Electric auxiliary contacts fronta LADN22 LADN22 is an additional block of auxiliary contacts from Schneider Electric for TeSys D and TeSys F contactors. Front mounting block, it is equipped with 2NO+2NC instantaneous contacts up to 10 A 690 V AC. Can be used in safety applications thanks to certified NC mirror contacts. PresentationRangeTeSysTeSys DecaProduct nameTeSys DecaProduct type Auxiliary contact blockDevice nameLADNRange compatibilityTeSys D CADTeSys D LC1DTeSys F LC1FTeSys F CR1FTeSys Deca CADTeSys Deca LC1DInstallationFront sidePole contact composition2 NO + 2 NC Contacts operationInstantaneousRated operational voltage [Ue]690 V AC 25...400 HzRated operational current [Ie]6 A at 120 V AC-151.04 A at 690 V AC-150.55 A at 125 V DC-130.1 A at 600 V DC-13Rated insulation voltage [Ui]690 V conforming to IEC 60947-5-1600 V conforming to UL600 V conforming to CSAThermal current conventional in open air [Ith]10 A (at 60 °C)Reference standardsCEI EN 60947-5-1GB/T 14048.5Technical characteristicsRated making capacity Irms140 A AC conforming to IEC 60947-5-1250 A DC conforming to IEC 60947-5-1 Permissible temporary rated current100 A 60 °C 1 s120 A 60 °C 500 ms140 A 60 °C 100 msType of protectionGG fuse 10 AMechanical life30 McyclesMinimum switching current5 mAMinimum switching voltage17 V

Read more less

Schneider Electric M340 digital input module - 32 inputs - 24 V DC positive BMXDDI3202K The digital input module is part of the Modicon X80 modules. It has 32 isolated inputs and is powered by 24V DC. This input module with 40-way connectors is designed to be used in conjunction with the TeSys Quickfit mounting system. It occupies a single slot in the rack and has an enclosure that provides 20 protection to the electronics. Product Range Modicon Digital Input Type IsolatedInput Type Sink Current (Positive Logic)Digital Input Voltage 24V DC PositiveDigital Input Current 2.5 mAInput Compatibility With 2/3-wire proximity sensors conforming to IEC 60947-5-2With 2/3-wire proximity sensors conforming to IEC 61131-2 Type 1Sensor Power Supply 19...30 VCurrent State 1 Guaranteed >= 2 mACurrent State 0 Guaranteed Input Impedance 9600 OhmInsulation Resistance > 10 MOhm 500 V DCDissipated Power In W 3.9 WDc Typical Response Time 4 msDc Maximum Response Time 7 msParallelizing Inputs NoTypical Current Consumption 121 mA at 3.3 V DC

Read more less

Schneider-Electric modular 18A RMS PEAK 3PH 480V LXM32MD18N4 The Lexium 32 servo drive operates at a nominal supply voltage of 208 Vac to 480 Vac. It can power 3 phase BMH or BSH synchronous motors, its continuous output current is 6 A at 8 kHz. The compact size of the servo drive and associated servo motor provides maximum power in minimal space. PresentationProduct rangeLexium 32Product typeMotion servo driveDevice nameLXM32Mvariator formatBooknumber of phases of the networkThree-phaseNominal supply voltage [Us]200...240 V - 15...10 %380. ..480 V - 15...10 %power supply voltage limits170…264 V323…528 Vpower frequency50/60 Hz - 5...5 %Mains frequency47.5...63 HzEMC filterIntegratedcontinuous output current6 A at 8 kHzpeak current output 3s18 A at 208 V for 5 s18 A at 480 V for 5 sMaximum continuous power1700 W at 208 V 3300 W at 400 V3300 W at 480 VRated power supply1.2 kW at 208 V 8 kHz1.8 kW at 400 V 8 kHz1.8 kW at 480 V 8 kHzline current6 A 78 % at 208 V, with external line choke of 1 mH6.9 A 90 % at 400 V, with choke external line choke of 1 mH6 A 98 % at 480 V, with external line choke of 1 mH6.2 A 140 % at 208 V, without line choke5.2 A 161 % at 400 V, without line choke4.5 A 165 % at 480 V, without line chokeTechnical characteristicsswitching frequency 8 kHzovervoltage category IIImaximum leakage current 30 mAoutput voltageelectrical isolationBetween power and controlcable typeIEC cable single stranded 50 °C) copper 90 °C XLPE/EPRelectrical connectionTerminal, clamping capacity: 3 mm², AWG 12 (CN8)Terminal, clamping capacity: 5 mm², AWG 10 (CN1)Terminal, capacity tightening torque: 5 mm², AWG 10 (CN10)tightening torque0.5 Nm CN8:0.7 Nm CN1:0.7 Nm CN10:number of digital inputs 2 Acquisition of discrete inputs2 security of discrete inputs4 logic of discrete inputstype of digital inputAcquisition (CAP terminals)Logic (DI terminals)Safety (compliment of STO_A, compliment of STO_B terminals)  

Read more less

Schneider Electric Zelio Logic modular smart relay - 26 I/O - 24 V DC - Clock - Display SR3B261BD The Zelio Logic SR3 compact / programmable controller from Schneider Electric uses a supply voltage of 24 V DC, has 26 inputs/outputs with screw terminals. It has a built-in clock and an LCD display. This compact programmable logic module is ideal for managing, remote controlling or monitoring simple automation systems. It is suitable for both industrial and commercial applications. It features a compact form factor that allows for DIN rail installation. It also offers simple programming, viewing and diagnostic functions for display and navigation button malfunctions. Local Display WithNumber O Lines Control Scheme 0…500 with FBD programming0…240 with programming scale Life Cycle 6…90 msBackup Time 10 years at 25 °CClock Drift 12 min/year at 0…55 °C 6 s/month at 25 °CControls Program memory at each start-upNominal supply voltage [Us] 24 V Power Supply Voltage Limits 19.2…30 VMaximum Supply Current 190 mA (without extension module)300 mA (with extensions)Power Dissipation In W 10 W with extensions6 W without extension moduleReverse Polarity Protection WithNumber of Digital Inputs 16 conforming to IEC 61131-2 Type 1Digital Input Type ResistiveDigital Input Voltage 24 V DCDigital Input Current 4 mA

Read more less

Schneider-electric STI fuse holder base - 2P - 10.3x38 - 500 Vac A9N15651 This Acti9 STI isolating fuse holder is a low voltage fuse disconnector. It is used for tertiary and industrial applications that require high interrupting capacity. It has a 2P pole, rated current up to 25A and gG or aM fuse curve with a fuse cartridge type of 10.3mm x 38mm. Can be mounted on DIN rail for modular installation. The general purpose fuse (gG fuse) provides overload and short circuit protection. The aM fuse for motor application provides short circuit protection (protection of loads with a high peak current). Technical dataPresentationRange Acti9Product Name Acti9 STIProduct Type Disconnector fuse holderDevice Name STINumber of Poles 2PTechnical characteristicsNominal Current [In] 2 A4 A6 A10 A16 A20 A25 AFuse Curve AMGGFuse Gauge 10.3 x 38 mm Rated Operating Voltage [Ue]500 V ACRated Insulation Voltage [Ui] 500 V AC 50/60 HzInstallation HookupInstallation DIN rail9 mm pitch 4Height 81 mmWidth 36 mmDepth 75 mm Color WhiteConnections - Terminals Screw fixing terminals1 cables 0.75…10 mm² rigidScrew fixing terminals1 cables 0. 5…6 mm² flexibleScrew fixing terminals 2 cables 0.75…4 mm² rigidScrew fixing terminals 2 cables 0.5…6 mm² flexibleWire stripping length 12 mmTightening Torque 2 m  

Read more less

Schneider Electric ATV320 speed variator - 1.5kW - 380...500V - 3 phase - compact ATV320U15N4C The Altivar 320 variable speed drive Schneider Electric is capable of powering 3-phase synchronous and asynchronous power motors with a rated power of up to 1.5 kilowatts/2 horsepower and a rated voltage of 380 to 500 Vac. This variable speed drive/frequency drive (VSD / VFD) is designed for simple industrial and commercial machines, such as packaging, material handling machinery, mechanical actuators and lifting devices. Its compact form factor allows you to reduce machine footprint by vertically stacking units in a machine frame. Advanced connectivity, including CANopen and Modbus, allows for deep integration into automation architectures without the use of additional network equipment.Product Range Altivar Machine ATV320Product Type Speed ​​variatorProduct For Specific Applications Complex machinesVersion Variant standardFormat Drive CompactInstallation Wall mountingPort communication protocol CANopen serial modbusOptional board Communication module, CANopen Communication module, EtherCATCommunication module, Profibus DP V1Communication module, ProfinetCommunication module, Ethernet PowerlinkCommunication module, Ethernet/IPCommunication module, DeviceNet Nominal Supply Voltage [Us] 380...500 V - 15...10 %Nominal Output Current 4.1 AMotor Power In Kw 1.5 kW for heavy useEMC filter Class C2 integrated EMC filterDegree of Protection IP IP20Number of Inputs Digital 7Input Type Digital STO safe torque off, 24 V DC, impedance: 1.5 kOhmDI1...DI6 logic inputs, 24 V DC (30 V )DI5 programmable as pulse input: 0…30 kHz, 24 V DC (30 V)Digital Input Logic Positive logic (source)Negative logic (current)Number of Outputs Digital 3Type of Digital Output Open collector DQ+ 0…1 kHz 30 V DC 100 mAOpen collector DQ- 0…1 kHz 30 V DC 100 mANumber of Analog Inputs 3Type of Analog Input AI1 voltage: 0...10 V DC, impedance: 30 kOhm, resolution 10 bit Bipolar differential voltage AI2: +/- 10 V DC, impedance: 30 kOhm, resolution10 bitCurrent AI3: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other models forconfiguration), impedance: 250 Ohm, resolution 10 bi

Read more less

Schneider Electric GV3P automatic circuit breaker - 50 A - everlink GV3P50 GV3P50 is a Schneider Electric TeSys GV circuit breaker for motors. It ensures thermal magnetic protection of 22 kW motors at 400 V and a high breaking capacity Icu 50 kA. Start-stop control via rotary handle guaranteed for 50,000 cycles AC-3 415V. GV3P50 is a TeSys GV motor circuit breaker from Schneider Electric designed for 22 kW motorized applications at 400 V. It meets thermal magnetic protection with a 37-50 A thermal setting range, 14 xIn magnetic tripping and a high Icu breaking capacity 50 kA at 400 V. Start-stop control via rotary handle guaranteed for 50,000 cycles AC-3 415V. Available worldwide, it is certified to various standards (IEC, UL, CSA, CCC, EAC, for use in marine environments) and is Green Premium compliant (RoHS/REACH). Range: TeSys DecaProduct Name: TeSys GV3TeSys DecaProduct Type: Automatic circuit breakerDevice Name: GV3PApplication: Motor protectionTrip Release Technology : Circuit breakerNumber of Poles: 3PMains Type: ACUsage Category AC-3 conforming to IEC 60947-4-1Mains Frequency: 50/60 Hz conforming to IEC 60947 -4-1Fixing type 35 mm symmetrical DIN rail: clippedPanel: screwed (with 3 x M4 screws)Motor power in kW 22 kW at 400/415 V AC 50/60 Hz30 kW at 500 V AC 50/60 Hz45 kW at 690 V AC 50/60 HzBreaking capacity: 100 kA Icu compliant with IEC 60947-2 at 230/240 V AC 50/60 Hz 50 kA Icu compliant with IEC 60947-2 at 400/415 V AC 50/60 Hz50 kA Icu compliant with IEC 60947-2 at 440 V AC 50/60 Hz12 kA Icu compliant with IEC 60947-2 at 500 V AC 50/60 Hz6 kA Icu compliant with IEC 60947-2 at 690 V AC 50/60 HzRated Service Breaking Capacity [Ics]:100 % conforming to IEC 60947-2 at 230/240 V AC 50/60 Hz100 % conforming to IEC 60947-2 at 400/415 V AC 50/60 Hz100 % conforming to IEC 60947-2 at 440 V AC 50/60 Hz50 % conforming to IEC 60947-2 at 500 V AC 50/60 Hz50 % conforming to IEC 60947-2 at 690 V AC 50/60 HzControl Type : Rotary handleNominal Current [In]: 50 AProtection Regulation RangeThermal37…50 A conforming to IEC 60947-4-1Magnetic Trip Current: 700 A

Read more less

Schneider-Electric Universal power supply ABL8RPS24030 The Schneider Electric ABL8 regulated switching mode power supply provides direct current voltage, has a rated input of 100 to 500 Vac, a rated output current of 3 A at 24 Vdc and a rated power of 72 watts. PresentationProduct rangeModicon Power SupplyProduct typePower supplypower supply typeSwitching modeNominal input voltage100...120 V AC single phase, terminals: N-L1200...500 V AC phase to phase, terminals: L1-L2nominal power in W 72 Woutput voltage 24 V DCoutput power supply current 3 Aadmissible temporary current amplification1.5 x In (for 4 s)anti-harmonic filterCurrents low frequency harmonicsTechnical characteristicsinput voltage limits170...550 V AC85...132 V ACInrush current30 A18 mm modules0.51 at 240 V AC0.59 at 120 V ACefficiency87 %Output voltage adjustment24.. .28.8 V adjustablepower dissipation in W 7.8 WEquipment suppliedPower factor corrector filter compliant with IEC 61000-3-2output protection type Against overload, protection technology: manual or automatic resetAgainst overvoltage, protection technology: 30...32 V, manual resetAgainst short circuits, protection technology: manual or automatic reset Against undervoltage, protection technology: intervention with U Thermal, protection technology: automatic resetconnections - terminalsScrew terminal blocks: 3 x 0.5...3 x 4 mm², (AWG 22...AWG 12) for input connectionScrew terminal blocks: 1 x 0.5...1 x 4 mm², (AWG 22...AWG 12) for input earth connection Screw terminal blocks: 4 x 0.5...4 x 4 mm², (AWG 22...AWG 12) for output connectionScrew terminal blocks: 1 x 0.5...1 x 4 mm², (AWG 22...AWG 12) for output ground connectionStatus LED1 LED (green and red) output voltage1 LED (green, red and orange) current outputdepth125 mmheight125 mmwidth45 mmproduct weight0.3 kgoutput connectionParallel

Read more less

Schneider Electric Selector head - 2 positions Ø22 - black ZB4BD2 The black Harmony XB4 selector head from Schneider Electric with standard lever has 2 positions and works with a fixed mechanism. It has a round shape and a chromed metal ring. This standard lever selector head provides an ergonomic interface for operating machines. It can be easily installed on compatible selectors and provides an effective way to set the machine into various operating modes. Thanks to its IP69K protection rating, it is resistant to shock, vibration, dust and water, and is ideal for use in harsh environments. Product Range Harmony Chromed metalMounting diameter 22 mmHead type StandardSale Quantity Indivisible 1Head Shape CircularOperator Type fixedOperator Type Black standard leverOperator Position Information 2 positions 90 °

Read more less

Schneider-electric Speed ​​variator ATV320 ATV320U40N4C The Altivar 320 Schneider Electric speed variator is capable of powering 3-phase synchronous and asynchronous power motors with a maximum nominal power of 4kilowatts/5 horsepower and a nominal voltage of 380 to 500 Vac. This variable speed drive/frequency drive (VSD / VFD) is designed for simple industrial and commercial machines, such as packaging, material handling machinery, mechanical actuators and lifting devices. Its compact form factor allows you to reduce machine footprint by vertically stacking units in a machine frame. Advanced connectivity, including CANopen and Modbus, enables deep integration into automation architectures without the use of additional networking equipment. Technical data: Product Range Altivar Machine ATV320Product Type Variable speedProduct By Applications SpecificationsComplex machinesVariant Standard versionVariator format CompactInstallation Wall mountingCommunication Protocol DoorCANopen serial modbusOptional board Communication module , CANopenCommunication module, EtherCATCommunication module, Profibus DP V1Communication module, ProfinetCommunication module, Ethernet PowerlinkCommunication module, Ethernet/IPCommunication module, DeviceNetNominal Supply Voltage [Us]380...500 V - 15...10 %Nominal Output Current 9.5 AMotor power in kW 4.0 kW for heavy useEMC filter Class C2 integrated EMC filterDegree of Protection Ip IP20Number of Digital Inputs 7Type of Digital Input STO safe torque off, 24 V DC, impedance: 1.5 kOhmDI1...DI6 logic inputs, 24 V DC (30 V)DI5 programmable as pulse input: 0…30 kHz , 24 V DC (30 V)Digital Input Logic Positive Logic (Source)Negative Logic (Current)Number of Digital Outputs 3Digital Output Type Open collector DQ+ 0…1 kHz 30 V DC 100 mAOpen collector DQ- 0…1 kHz 30 V DC 100 mANumber of Analog Inputs 3Type of Analog Input AI1 voltage: 0...10 V DC, impedance: 30 kOhm, 10 bit resolution Bipolar differential voltage AI2: +/- 10 V DC, impedance: 30 kOhm, resolution10 bitCurrent AI3: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other models forconfiguration), impedance: 250 Ohm, 10 bit resolutionNumber of Analog Outputs 1Analog Output Type Current configurable with AQ1 software: 0...20 mA impedance 800 Ohm,10 bit resolutionVoltage configurable with AQ1 software: 0...10 V DC impedance 470 Ohm,10 bit resolutionRelay output type Configurable relay logic R1A 1 NO electrical life 100000 cyclesConfigurable relay logic R1B 1 NC electrical life 100000 cyclesConfigurable relay logic R1CConfigurable relay logic R2A 1 NO electrical life 100000 cyclesConfigurable relay logic R2CWidth:140 mmHeight: 184.0 mm Depth: 158.0 mm

Read more less

Schneider-electric Button head Ø22 - rotation release - mushroom Ø40mm - red ZB4BS844 The Schneider Electric 40mm Emergency Stop Harmony It has a chromed metal ring. This emergency stop/shutdown button head easily matches contact blocks and installs into standard 22mm diameter openings and connects with simple screw terminal connections. Thanks to the vibrant color and striking 40mm mushroom shape, it is clearly visually distinguishable from a distance. It is resistant to shock, dust, vibration and water, thanks to the IP66/IP67/IP69/IP69K protection ratings which make it ideal for use in harsh environments.  Product Range: Harmony Indivisible: 1Head Shape: CircularType of Operator: mechanical couplingReset: Turn to unlockType: Operator Red mushroom Ø 40, unmarkedType of Head: StandardTotal Cad Width: 40 mmTotal Cad Height: 40 mmTotal Cad Depth: 57 mmProduct Weight: 0.073 kgMechanical Durability: 300000 cycles

Read more less

Schneider-Electric Controller M241 24 I/O TR PNP ETH TM241CE24T  It is a logic controller with a rated supply/output voltage of 24V DC, an output current of 0.5A for transistor output, 0.1A for fast output current with sink or source input logic and positive output logic. PresentationProduct rangeModicon M241Product typeLogic controllerNominal supply voltage [Us] 24 V CCNumber of digital inputs14, digital input 8 fast input conforming to IEC 61131-2 Type 1digital output typeTransistor number of digital outputs10 transistors 4 fast outputdigital output voltage24 V DC for transistor outputdigital output current0.5 A for transistor output (Q0...Q9 )0.1 A for fast output (PTO mode) (Q0...Q3)Technical characteristicsnumber of digital I/Os 24number of I/O modules O expansion7 (local I/O architecture)14 (remote I/O architecture)power supply voltage limits 20.4…28.8 Vinrush current 50 A power absorbed in W 32.6…40.4 W (with max number of I/O expansion modules)Digital input logicSink or sourcedigital input voltage 24 Vvoltage type of digital input DCvoltage state 1 guaranteed>= 15 V for inputvoltage state 0 guaranteeddigital input current5 mA for input10.7 mA for fast inputinput impedance4.7 kOhm for input2.81 kOhm for fast inputResponse time50 µs turn-on, I0...I13 terminals per input50 µs turn-off, I0...I13 terminals per inputConfigurable filtering time1 µs per input rapid12 ms per input rapid0 ms per input1 ms per input4 ms per input 12 ms per inputdigital output logicPositive logic (source)output voltage limits 30 V DCcurrent for common output2 A with Q0...Q3 terminal for fast output2 A with Q4...Q7 terminal for output1 A with Q8...Q9 terminal for outputoutput frequency20 kHz for fast output (PWM mode) 100 kHz for fast output (PLS mode)1 kHz for outputprecision+/-0.1% at 0.02…0.1 kHz for fast output+/- 1 % at 0.1…1 kHz for fast outputmaximum leakage current5 µA for output

Read more less