Pilz PNOZ X3 110VAC 24VDC 3n/o 1n/c 1so 774314 Safety module (standalone), inputs: Single/dual-channel wiring with/without short-circuit detection, outputs: 3 NO, 1 NC, 1 semiconductor, automatic/controlled start, UB 110 V AC/24 V DC, width: 45 mm, integrated screw terminals, emergency stop control, mobile repairs. Technical dataElectrical dataPower supply voltage (V) 110 VType of power supply voltage U1 AC Power consumption AC 5 Supply voltage 2(V) 24 24 Type of supply voltage U2 DC Tolerance of U2 InputsNumber of inputs 2 Semiconductor outputsN. semiconductor outputs 1 Toll. tens. East. DC semicond. -20%/+20% Cat. employment according to EN 60947-1 DC-12 Relay outputsCat. AC/DC use1 Standard EN 60947-4-1 Voltage AC1 cont. safety 240 Corr. max AC1 cont. of safety. 8 Volt. DC1 cont. for sure. 24 Corr. max DC1 safety contact 8 Cat. use AC15/DC13 Standard EN 60947-5-1 Voltage AC15 cont. for sure. 230 Corr. max AC15 safety contact 5 Volt. DC13 cont. for sure. 24 Safety contacts: AC for UL 240 V AC G. P. Safety contacts: Pilot Duty B300, R300 Relay contact material AgSnO2 Suppl. data relay contacts + 0.2 µm Au Environmental dataClimatic stress according to... EN 60068-2-78 Ambient temperature -20 - 55 °CHumidity indication 93 % RH at 40 °C Condensation permitted not permitted EMC acc. standard .... EN 60947-5-1 EN 61000-6-2 EN 61326-3-1 Vibrations acc. Standard ... EN 60068-2-6 Distances in air and surface sec. EN 60947-1 Overvoltage category III / II Contamination degree 3  

Read more less

Pilz PNOZ s3 24VDC 2 n/o 750103  PNOZsigma safety module (standalone), inputs: 1/2-channel wiring without/without short-circuit detection, manual/automatic start, outputs: 2 NO, 1 semiconductor, UB 24 VDC, width: 17.5 mm, terminal block removable screws, emergency stop control, movable guards, light barrier. Technical data Electrical dataSupply voltage (V): 24 VType of supply voltage U1: DC Power consumption DC: 2.5 W InputsNumber of inputs: 2 Semiconductor outputsN. semiconductor outputs: 1 Cat. employment according to EN 60947-1: DC-12 Relay outputsCat. AC/DC use1 Standard: EN 60947-4-1 Voltage AC1 cont. safety: 240 Corr. max AC1 cont. of safety: 6 Volt. DC1 cont. safety: 24 Corr. max DC1 safety contact: 6 Cat. use AC15/DC13 Standard: EN 60947-5-1 Volt. AC15 cont. safety: 230 Corr. max AC15 safety contact: 5 Volt. DC13 cont. safety contacts: 24 Safety contacts: AC for UL: 240 V AC G.U. (same polarity) Relay contact material: AgCuNi Additional data relay contacts: + 0.2 µm Au  

Read more less

Pilz P1HZ X1 24VDC 2n/o 774360 Safety module (standalone), inputs: 1 NO per button, outputs: UB 24 V DC, width: 22.5 mm, integrated screw terminals, two-hand control device, simultaneity control for the two-hand button. Technical dataElectrical dataSupply voltage (V) 24 VType of supply voltage U1 DC Power consumption DC 2 WInterrupt. magnetot. avail. max. Max. section conductor Tp. two-man device. according to Bimanual device type III A InputsNumber of inputs 2 Semiconductor outputsNo. semiconductor outputs 0 Relay outputsCat. AC/DC use1 Standard EN 60947-4-1 Voltage AC1 cont. safety 240 VCorr. max AC1 cont. of safety. 6 ATen. DC1 cont. for sure. 24 VCorr. max DC1 safety contact 6 ACat. use AC15/DC13 Standard EN 60947-5-1 Voltage AC15 cont. for sure. 230 VCorr. max AC15 safety contact 5 AVolt. DC13 cont. for sure. 24 VSafety contacts: AC per UL 240 V AC G. P. Safety contacts: Pilot Duty C300, R300 Relay contact material AgSnO2 Suppl. data relay contacts + 0.2µ Au Environmental dataClimatic stress according to... EN 60068-2-78 Ambient temperature -25 - 55 °CHumidity indication 93 % RH at 40 °C Condensation permitted not permitted EMC acc. standard .... EN 60947-5-1 EN 61000-6-2 Vibrations acc. Standard ... EN 60068-2-6 Distances in air and surface sec. EN 60947-1 Overvoltage category III / II Contamination degree 2

Read more less

Pilz PNOZ m1p/m0p/m2p Spring terminal set 783100 1 set of spring terminals for PNOZmulti Classic basic devices.  

Read more less

Abb AF09-30-10-11 1SBL137001R1110 The AF09-30-10-11 is a 3-pole contactor - 690 V IEC or 600 UL with 1 built-in auxiliary contact and screw terminals, which controls motors up to 4 kW / 400 V AC (AC-3 ) or 5 hp / 480 V UL and switching power circuits up to 25 A (AC-1) or 25 A UL general purpose. Thanks to AF technology, the contactor has a wide control voltage range (24-60 V 50/60 Hz and 20-60 V DC), managing large control voltage variations, reducing panel energy consumption and ensuring smooth operation. distinguished in unstable networks. Additionally, surge protection is built-in, offering a compact solution. AF contactors have a block design, they can be easily expanded with additional auxiliary contact blocks and a wide range of additional accessories. Technical data Number of main NA contacts: 3 Number of main NC contacts: 0 Number of auxiliary contacts NO: 1 Number of NC auxiliary contacts: 0 Reference standards: IEC/EN 60947-1, IEC/EN 60947-4-1, UL 60947-4-1, CSA C22.2 No. 60947-4-1 Rated operating voltage: Auxiliary Circuit 690 VMain Circuit 690 V Nominal frequency (f): Auxiliary Circuit 50 / 60 HzControl Circuit 50 / 60 HzMain Circuit 50 / 60 Hz Conventional thermal current in free air (Ith): according to IEC 60947-4-1, Open Contactors q = 40 °C 35 Aaccording to IEC 60947-5-1, q = 40 °C 16 A Rated operating current AC-1 (Ie): (690 V) 40 °C 25 A(690 V) 60 °C 25 A(690 V) 70 °C 22 A

Read more less

Abb safety transformer 250VA 2CSM260113R0801 TM-S transformers are ideal for powering very low safety voltage SELV circuits. Technical dataReference standards: EN 61558-2-2, EN 61558-2-6, UL506, CSA C22-2-N66Rated insulation voltage (Ui) :4.8 kVPrimary voltage:230-400 ±15 V ACSecondary voltage:12-24 V ACRated frequency (f):50/60 HzPower loss:38 WPower supply:250 V AInsulation class:FType of fuse:aMMaterial of Conductor:CopperCable section:6 mm² Environmental dataAmbient temperature: max. 40 °CRoHS Declaration: According to EC Directive 2011/65/ECRoHS Information:9AKK106713A5642REACH Declaration:9AKK108467A9482Environmental information: Please refer to RoHS InformationConflict Minerals Reporting Template (CMRT):9AKK108468A3363 DimensionsProduct width:100 mmProduct height:0.105 mProduct depth:110 mmProduct net weight:3,600 kg InstallationInstructions and manuals: No document neededWiring diagram:9AKK108466A7520Download Most usedTechnical sheet:2CSC446005B0202Inrush Power Curve :9AKK108467A2987Transformer Protection Selection Table:9AKK108467A2982Power Draw According to Altitude:9AKK108467A2983Power Draw According to Temperature:9AKK108467A2985Admissible Overload:9AKK108467A2986

Read more less

CT-MFD.21 TEMPORARY RELAY MULTIFUNCTION  1SVR500020R1100 They are used when the command of utilities is required based on a time interval. Technical dataType of timer relay:ON-DelayOFF-DelayImpulse ONImpulse OFFFlasher Starting with ONFlasher Starting with OFFPulse Former Time range: 0.05 s ... 100 hRated control supply voltage (Us): 12 ... 240 V AC/DCRated operating voltage: Auxiliary circuit 250 V Rated frequency (f):DC50 / 60 HzOutput:2 c/o (SPDT) contacts Clamp type: Screw TerminalsRated operating current AC-12 (Ie):(230 V) 5 ARated operating current AC-15 (Ie):(230 V) 3 ARated operating current DC-12 (Ie):(24 V) 5 ARated operating current DC-13 (Ie):(24 V) 1 AImpulse withstand voltage (Uimp): Input Circuit 4 kVRated insulation voltage (Ui):Input Circuit / Output Circuit 300 VOutput Circuit 1 / Output Circuit 2 300 V Degree of protection: Home IP50Terminals IP20Overvoltage category:IIIPollution degree:3Short circuit protection devices:NC Output Circuit - Type F fuses 6 ANO Output Circuit - Type F Fuses 6 AConnection capacity:Flexible 1x 0.5 ... 2.5 mm²Flexible 2x 0.5 ... 1.5 mm²Rigid 1x 0.5 ... 4 mm²Rigid 2x 0.5 ... 1.5 mm²

Read more less

Abb Motor protectors and thermal relays-Protection switches 1SAM250000R1007 Motor protectors and thermal relays-Class 10 thermal magnetic protection switches-MS116 class 10 motor protectors. Technical dataRated service short-circuit capacity (Ics):(230 V AC) 50 kA(400 V AC) 50 kA(440 V AC) 10 kA(500 V AC) 10 kA(690 V AC) 5 kA Rated extreme short-circuit capacity (Icu):(230 V AC) 75 kA(400 V AC) 75 kA(440 V AC) 30 kA(500 V AC) 20 kA(690 V AC) 10 kA Setting instantaneous rated short-circuit current (Ii):31.3 ASetting range:1.6 ... 2.5 ARated operating current AC-3 (Pe) :(400 V) Three Phases 0.75 kWRated operating current AC-3e (Pe):(400 V) Three Phases 0.75 kW Rated operating voltage: Main Circuit 690 V ACRated operating current (Ie):2.5 ARated operating current AC-3 (Ie):2.5 ARated operating current AC-3e (Ie):2.5 A Nominal frequency (f): Main Circuit 50 HzMain Circuit 60 HzImpulse withstand voltage (Uimp):Main Circuit 6 kVRated insulation voltage (Ui):690 VLeakage power: at Nominal Operating Conditions for Pole 0.7 ... 1.8 W Number of poles: 3Conventional free air thermal current (Ith): Main Circuit 2.5 A Degree of protection: Housing IP20Main Circuit Terminals IP10 Pollution degree: 3Electrical life:100000 cycle (i)Mechanical life:100000 cycle (i)Terminal type:Screw TerminalsCable sections - main circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²Flexible with Insulated Ferrule 1/2x 0.75 ... 2.5 mm²Flexible 1/2x 0.75 ... 2.5 mm²Rigid 1/2x 1 ... 4 mm²Tightening torque:Main Circuit 0.8 ... 1.2 N·mCable stripping length:Main Circuit 9 mm  

Read more less

Abb LV AC general purpose wall-mounted drive, IEC: Pn 90 kW, 169 A, 400 V, 480 V (ACS580-01- 169A-4 3AUA0000080505 The ACS580-01 is ready for plug-in control of compressors, conveyors, pumps, extruders, centrifuges, mixers, fans and many other variable and constant torque applications, in a variety of light industries, including food and beverages, plastics, textiles, materials handling and agriculture. All essential features are built-in as standard, simplifying drive selection and making additional hardware unnecessary. The versatile and simple settings menu and assistants allow for quick setup, commissioning, use and maintenance, while the rugged and robust design makes it suitable for various environments. With the ACS580 frequency converters you can easily take full control of the processes to completely manage the plant. The wall mounted ACS580-01 comes standard in an IP21 enclosure. Additionally, IP55 and flanged mounting units are available. Technical dataNumber of phases: 3Protection degree: IP21NEMA enclosure type: Type1Altitude: 1000 m95 Sound level dB (A): 67 dB(A)Multiple battery information: Lithium Coin, CR2032, 220 mAh, 3 V, 1 pc, 3 gFrequency (f): 47.5 ... 63 Hz Chassis size: R7Input voltage: (Uin 380 ... 480 V)Mounting type: Wall-mountedAnalog inputs: 2Analog outputs: 2Number of digital inputs/outputs: 6 / 3Output current, heavy-duty use (IHD): 145 AOutput current, light overload use (ILD): 161 A Output current, normal use (In): 169 AOutput power, heavy-duty use (PHD): 75 kW

Read more less

Abb ACS355-03E-23A1-4 3AUA0000058192 ACS355 drives are designed to meet the requirements of a wide range of machinery applications in the food and beverage, materials handling, lifting, textile, printing, rubber and plastic and processing industries. wood.The drive is easy to use, yet offers a wide range of integrated technologies, such as safe torque shutdown functionality and sequence programming, reducing the need for additional control electronics. The product offers options and features to meet the speed and torque control needs of AC induction and permanent magnet motors. Technical dataNumber of phases: 3Protection degree: IP20Enclosure type: NEMA Open TypeFrequency (f): 50/60 HzChassis dimensions: R3Input voltage (Uin): 380 … 480 VMounting type: Module for cabinet buildingAnalog inputs: 2Analog outputs: 1Number of digital inputs/outputs: 5/1Output current, normal use (In): 23.1 AOutput power, light overload use (PLD): 11 kWOutput power, normal use ( Pn): 11 kW

Read more less

Schneider-Electric 2 position lever selector ATV320U55N4B The black Harmony XB4 modular selector switch from Schneider Electric has 2 positions, works with a fixed mechanism and uses screw terminals. It has 1 NO contact and a chromed metal ring. This selector provides a versatile interface for controlling machines. PresentationProduct rangeHarmony t517 > 1Head typeStandardHead shapeCircularOperator typeFixedType operatorStandard lever blackOperator position information2 positions 90°Contact composition and type1 NOContact operation Slow openingConnections - terminalsScrew fixing terminals, <= 2 x 1.5 mm² with cable end conforming to IEC 60947-1Screw fixing terminals, > = 1 x 0, 22 mm² without cable end conforming to IEC 60947-1Technical characteristicsheight47 mmwidth30 mmdepth68 mmDescription of ISO clamps n°1(13-14)NOproduct weight0.095 kgResistance to high pressure washing7000000 Pa at 55 ° C, distance: 0.1 mcontact useStandard contactsPositive openingWithoutTorque value0.14 Nm NO with modification of electrical stateMechanical life1000000 cyclestightening torque0.8…1.2 Nm conforming to IEC 60947-1Head shape (screw)Cross head compatible with Philips no 1 screwdriverCross head compatible with pozidriv No 1 screwdriverSlotted compatible with flat Ø 4 mm screwdriverSlotted compatible with flat Ø 5.5 mm screwdriverContact material Silver alloy (Ag/Ni)Protection against short circuits10 A cartridge fuse type gG compliant with IEC 60947-5-1Conventional thermal current in air [Ith]10 A conforming to IEC 60947-5-1Rated insulation voltage [Ui]600 V (pollution degree 3) conforming to IEC 60947-1Rated impulse withstand voltage [Uimp]6 kV conforming to IEC 60947-1

Read more less

Schneider Electric TM3 module - 8 inputs TM3DI8 The product is part of the Modicon TM3 range, an offering of expansion I/O modules for Modicon M221, M241,M251 and M262. The digital input module provides 8 inputs with sink or source logic (positive/negative). It is an input module with an input voltage of 24V DC and a current consumption of 24 mA/5 mA at 5V DC via bus connector. It can be used to create setups with up to 8 inputs. Features insulation between input and internal logic at 500V AC; it has no insulation between the inputs. For the electrical connection it has a removable screw terminal with 5.08 mm pitch adjustment for the inputs. The product is classified IP20. Dimensions: 27.4mm (width) x 84.6mm (depth) x 90mm (height). Weight: 0.110kg. The product is CE, CULus and C-Tick certified. It complies with EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. The module is compatible with Modicon M262, Modicon M241, Modicon M251 and Modicon M221 logic controllers. Supports TH35-15 type top hat guides and TH35-7.5 type top hat guides in accordance with IEC 60715 and plate or panel with mounting via fixing kit. Modicon TM3 expansion modules have been designed with a simple snap-together assembly mechanism. When mounting Modicon TM3 modules with logic controllers, an extension bus connector is used to distribute data and power. Enhance the performance of your controllers with the Modicon TM3 I/O system, specifically designed for Modicon M221, M241 and M251 logic controllers. Technical data Product rangeModicon TM3Product typeDigital input modulerange compatibility Modicon M241Modicon M251Modicon M221Modicon M262 - Modicon M241 - Modicon M251number of digital inputs8 per input compliant with IEC 61131-2 Type 1digital input logicDrain or source (positive/negative)digital input voltage24 Vinput current digital7 mA per inputTechnical characteristicsnumber of digital I/Os8current absorption5 mA at 5 V DC Via the bus connector (at off state)0 mA at 24 V DC Via the bus connector (at on state)0 mA at 24 V DC Via the bus connector (at off state)24 mA at 5 V DC Via bus connector (in on state)digital input voltage typeDCguaranteed voltage state 115 ...28.8 V per inputcurrent state 1 guaranteed>= 2.5 mA (input)voltage state 0 guaranteed 0...5 V per inputcurrent state 0 guaranteedinput impedance3.4 kOhmresponse time4 ms (turn-on)4 ms (turn-off)local signaling1 LED per channel ( green) input status:electrical connection11 2.5 mm² terminal block removable screw with 5.08 mm pitch adjustment for inputsmaximum cable length between devicesUnshielded cable: isolationBetween input and internal logic at 500 V ACNot isolated between inputsmarkingCEmounting supportTop hat type TH35-15 rail compliant with IEC 60715Top hat type TH35-7.5 rail compliant with IEC 60715plate or panel with fixing kitheight90 mmdepth84.6 mmwidth27.4 mmproduct weight0.085 kg

Read more less

Schneider-Electric 2 position lever selector XB4BD21 The black Harmony XB4 modular selector switch from Schneider Electric has 2 positions, works with a fixed mechanism and uses screw terminals. It has 1 NO contact and a chromed metal ring. This selector provides a versatile interface for machine control. PresentationProduct rangeHarmony Head materialChrome metalfixing base materialZamakmounting diameter 22 mmsale indivisible quantity 1Head typeStandardHead shapeCircularOperator typeFixedOperator typeStandard lever blackOperator position information2 positions 90°Composition and type of contacts1 NOContact operationSlow opening Connections - terminalsScrew fixing terminals, Screw fixing terminals, > = 1 x 0.22 mm² without cable end compliant to IEC 60947-1Technical characteristicsheight 47 mmwidth 30 mmdepth 68 mmDescription of ISO terminals n°1(13-14)NOproduct weight 0.095 kgHigh pressure washing resistance7000000 Pa at 55 °C, distance: 0.1 muse contactsStandard contactsPositive openingWithoutTorque value0.14 Nm NO with modification of the electrical stateMechanical life1000000 cycles tightening torque0.8…1.2 Nm conforming to IEC 60947-1Head shape (screw)Cross head compatible with Philips no 1 screwdriver Cross head compatible with pozidriv No 1 screwdriverSlotted compatible with flat Ø 4 mm screwdriverSlotted compatible with flat Ø 5.5 mm screwdriverContact material Silver alloy (Ag/Ni)Protection against short circuits10 A cartridge fuse type gG conforming to IEC 60947-5-1Conventional thermal current in air [Ith] 10 A conforming to IEC 60947-5-1Rated insulation voltage [Ui]600 V (pollution degree 3) conforming to IEC 60947-1Rated impulse withstand voltage [Uimp]6 kV conforming to IEC 60947-1Rated operational current [Ie]3 A at 240 V, AC-15, A600 conforming to IEC 60947-5-16 A at 120 V, AC-15, A600 conforming to IEC 60947-5-10.1 A at 600 V, DC-13, Q600 compliant with IEC 60947-5-10.27 A at 250 V, DC-13, Q600 compliant with IEC 60947-5-10.55 A at 125 V, DC-13, Q600 compliant to IEC 60947-5-11.2 A at 600 V, AC-15, A600 conforming to IEC 60947-5-1

Read more less

Schneider Electric ATV320 speed variator - 0.37kW - 380...500V - 3 phase - compact ATV320U04N4C The Altivar 320 variable speed drive is capable of powering three-phase asynchronous motors with a nominal power of 0.37 kW and a nominal voltage of 380 to 500 Vac. Altivar 320 is designed for simple industrial and commercial machines, such as packaging, material handling machinery, mechanical actuators and lifting devices. Its compact form factor allows you to reduce machine footprint by vertically stacking units in the machine chassis. Advanced connectivity, including CANopen and Modbus, enables deep integration into automation architectures without the use of additional networking equipment. Product Range: Altivar Machine ATV320Product Type: Speed ​​variatorProduct For Specific Applications: Complex machinesVariant: Standard versionDrive format: CompactInstallation: Wall mountingController communication protocol Ports: Serial ModbusCANopenOptional Board Communication module: CANopenCommunication module, EtherCATCommunication module, Profibus DP V1Communication module, ProfinetCommunication module, Ethernet PowerlinkCommunication module, Ethernet/IPCommunication module, DeviceNetNominal power supply voltage [Us]: 380...500 V - 15 ...10 %Nominal Output Current: 1.5 AMotor Power in kW: 0.37 kW for heavy duty EMC filter Class C2 integrated EMC filterProtection Degree: IP IP20Number of Digital Inputs: 7Digital Input Type: STO safe torque off, 24 V DC, impedance: 1.5 kOhmDI1...DI6 logic inputs, 24 V DC (30 V)DI5 programmable as high voltage input pulses: 0…30 kHz, 24 V DC (30 V)Digital Input Logic Positive logic (source)Negative logic (current)Number of Digital Outputs: 3 Digital Output Type: Open collector DQ+ 0…1 kHz 30 V DC 100 mAOpen collector DQ- 0…1 kHz 30 V DC 100 mA

Read more less

Schneider-Electric safety module UAK 24V M.SCREW XPSUAK12AP The product is part of the XPS Universal security module range. It is designed for monitoring emergency stops, safety, magnetic or proximity switches, PNP and NPN sensors, RFID safety switches, safety barriers and sensitive mats/edges. PresentationProduct rangeHarmony Safety AutomationProduct typeSafety modulesafety module name XPSUAKsafety module applicationMonitored antivalent contactsFor emergency, protection and barrier monitoring4-wire pressure sensor monitoringModule function Emergency stop button with 2 NC contactsSafety monitoring with 1 or 2 limit switchesControl of 2 PNP sensorsMagnetic switch monitoringSafety barrier control RFID safety switch controlSafety barrier monitoring (ESPE)Safety mat controlProximity sensor monitoringMonitoring 1 PNP + 1 NPN sensor Safety levelCan reach PL e/category 4 for NO relay contact conforming to ISO 13849-1Can reach SILCL 3 for NO relay contact conforming to IEC 62061Can reach SIL 3 for NO relay contact conforming to IEC 61508Can reach PL c/category 1 for NC relay contact conforming to ISO 13849-1Can reach SILCL 1 for NC relay contact conforming to IEC 62061Can ' achieve SIL1 for NC relay contact conforming to IEC 61508Reliability data safetyMTTFd > 30 years conforming to ISO 13849-1Dcavg >= 99 % conforming to ISO 13849-1PFHd = 1.13E-09 conforming to ISO 13849-1HFT = 1 conforming to IEC 62061PFHd = 1.13E-09 conforming to IEC 62061SFF > 99% conforming to IEC 62061HFT = 1 conforming to IEC 61508-1PFHd = 1.13E-09 conforming to IEC 61508-1SFF > 99% conforming to IEC 61508-1Type = B conforming to IEC 61508-1topology of the networkNC doublePNP doubleAntivalent double OSSD doubleconnections - terminalsRemovable screw terminal block, 0.2...2.5 mm² solid or flexibleTerminal block removable screw terminal block, 0.25...2.5 mm² flexible with ferrule single conductorRemovable screw terminal block, 0.2...1.5 mm² solid or flexible double conductorRemovable screw terminal block, 2 x 0.25...1 mm² flexible with ferrule without cable end, with maskRemovable screw terminal block, 2 x 0.5...1.5 mm² flexible with ferrule with cable end, with maskVoltage nominal power supply [Us]24 V AC - 15...10 %24 V DC - 20...20 %Technical characteristicssynchronization time between inputs 0.5 s 2 s 4 sType of startingAutomatic/manual/monitoredPower absorbed in W2.0 W 24 V DCPower consumption in VA5.0 VA 24 V AC 50/60 Hztype of input protectionInternal, electronicsafety outputs2 NO + 1 NCsafety inputs2 safety input 24 V DC 5 mAmaximum wire resistance 500 OhmInput compatibilityNormally closed circuit conforming to ISO 14119XC limit switch conforming to ISO 14119Mechanical contact conforming to ISO 14119Normally closed circuit conforming to ISO 13850Double antivalent conforming to ISO 14119Double OSSD conforming to IEC 61496-1-23-wire PNP proximity sensorsRated operational current [Ie]5 A AC-1 for NO relay contact3 A AC-15 for NO relay contact5 A DC-1 for NO relay contact3 A DC-13 for NO relay contact 3 A AC-1 for NC relay contact1 A AC-15 for NC relay contact3 A DC-1 for NC relay contact1 A DC-13 for NC relay contactcontrol outputs 3 configurable on/off pulsed outputinput/output typePulsed semiconductor signaling output. 24 V DC, 20 mA Z1, non-safety relatedConventional thermal current in air [Ith]8 Aassociated fuse rating10 A gG for output circuit NO relay conforming to IEC 60947-1minimum output current10 mA per relay outputminimum output voltage12 V per relay outputRated insulation voltage [Ui]250 V (pollution degree 2) conforming to IEC 60947-1Rated impulse withstand voltage [Uimp]4 kV overvoltage category II conforming to IEC 60947-1Installation35 mm symmetrical DIN raildepth120 mmheight100 mmwidth22.5 mmproduct weight0.200 kg

Read more less

Schneider Electric Power base - TeSys U - 12 A - Control screw terminals LUB12 TeSys U standard power base, 3 pole (3NO), 12 A/ 690 V, to be completed with a LUC control unit to form a TeSys U reversing starter controller, for 3-speed motor applications phases up to 5.5 kW at 400 V. Base composed of power contacts, control coil, rotary handle, with a modular design for additional modules to get an "all in one" starter controller with protection functions and basic or advanced control. It is equipped with a connection terminal block and closing shutters that cover the empty cavities. It provides a high breaking capacity Icu 50 kA at 400 V, start-stop control guaranteed for 3600 cycles/hour. Very compact (45mm wide), DIN rail mounting and screw fixing, with a padlockable rotary handle. Certified when used in combination with a LUC control unit (IEC, UL, CSA, CCC, EAC, Marine), compliant with Green Premium (RoHS/REACh). Range: TeSysProduct Name: TeSys UltraDevice Name: LUBProduct Type : Power base with 1 direction of travelApplication: Motor control Motor protectionNumber of Poles: 3PAptitude for Insulation: YesNominal Operational Voltage [Ue]: 690 V AC for Power CircuitMains Frequency: 40...60 HzConventional Thermal Current In Air [Ith]: 12 ARated Operational Current [Ie] 12 A at 12 A at 500 V 9 A at 690 VUsage Category AC-43AC-44AC-41Rated Breaking Capacity Service [Ics]50 kA at 230 V50 kA at 440 V10 kA at 500 V4 kA at 690 VAuxiliary Contact Composition : 1 NO + 1 NCType of Auxiliary Contacts connected contact type (1 NO + 1 NC) conforming to IEC 60947-4-1mirror contact type (1 NC) conforming to IEC 60947-1 typical current consumption130 mA at 24 V DC I maximum during closing with LUCA, LUCB, LUCC, LUCD140 mA at 24 V AC I maximum during closing with LUCA, LUCB, LUCC, LUCD150 mA at 24 V DC I maximum during closing with LUCM280 mA at 110...220 V DC I maximum during closing with LUCA, LUCB, LUCC, LUCD280 mA at 110...240 V AC I maximum during closing with LUCA, LUCB, LUCC, LUCD280 mA at 48...72 V AC I maximum during closing with LUCA, LUCB, LUCC, LUCD280 mA at 48...72 V DC I maximum during closing with LUCA, LUCB, LUCC, LUCD35 mA at 110...220 V DC I rms fixed with LUCA, LUCB, LUCC, LUCD35 mA at 110...240 V AC I rms fixed with LUCA, LUCB, LUCC, LUCD35 mA at 48...72 V AC I rms fixed with LUCA, LUCB, LUCC, LUCD35 mA at 48...72 V DC I rms fixed with LUCA, LUCB, LUCC, LUCD60 mA at 24 V DC I rms fixed with LUCA, LUCB, LUCC, LUCD70 mA at 24 V AC I rms fixed with LUCA, LUCB , LUCC, LUCD70 mA at 24 V DC I rms fixed with LUCMheat dissipation2 W for control loop with LUCA, LUCB, LUCC, LUCD 1.7 W per control circuit with LUCMSafety reliability levelB10d = 1369863 cycles Contactor with rated load compliant with EN/ISO 13849-1B10d = 20000000 cycles Contactor with mechanical load compliant with EN /ISO 13849-1operating time35 ms opening with LUCA, LUCB, LUCC, LUCD, LUCM for control circuit50 ms at >= 72 V closing with LUCA , LUCB, LUCC, LUCD for control circuit60 ms at 48 V closing with LUCA, LUCB, LUCC, LUCD for control circuit70 ms at 24 V closing with LUCA, LUCB, LUCC, LUCD for circuit control circuit75 ms closing with LUCM for control circuitMechanical life15 McyclesMaximum operating speed3600 cycles/hProduct certificationsCEULCSACCCEACASEFAATEXMarinaStandardsEN 60947-6-2IEC 60947-6-2UL 60947-4-1, with phase spreaderCSA C22.2 No 60947-4-1, with phase spreader phaseRated insulation voltage [Ui]690 V conforming to IEC 60947-6-2 (pollution degree 3)600 V conforming to UL 60947-4-1 600V compliant with CSA C22.2 No 60947-4-1Rated impulse withstand voltage [Uimp]6 kV conforming to IEC 60947-6-2safe circuit separation400 V SELV between auxiliary and control circuits conforming to IEC 60947-1 appendix N400 ​​V SELV between auxiliary or control circuit and main circuit conforming to IEC 60947-1 appendix N type of fixingClip-on (DIN rail)Screw fixed (Plate)connections - terminalsControl circuit: screw fixing terminals 1 cables 0 ,34…1.5 mm² flexible with cable terminationControl circuit: screw fixing terminals 1 cables 0.75…1.5 mm² flexible without cable terminationControl circuit: screw fixing terminals 1 cables 0.75…1.5 mm² rigidControl circuit: screw fixing terminals 2 cables 0.34…1.5 mm² flexible with cable terminationControl circuit: screw fixing terminals 2 cables 0.75…1.5 mm² flexible without cable terminationControl circuit: screw fixing terminals 2 cables 0.75…1.5 mm² rigidPower circuit: screw fixing terminals 1 cables 1 …10 mm² rigidPower circuit: screw fixing terminals 1 cable 1…6 mm² flexible with cable terminationPower circuit: screw fixing terminals 1 cable 2.5…10 mm² flexible without cable termination Power circuit: screw fixing terminals 2 cables 1…6 mm² flexible with cable terminationPower circuit: screw fixing terminals 2 cables 1…6 mm² rigidPower circuit: screw fixing terminals screw fixing 2 cables 1.5…6 mm² flexible without cable terminationtightening torqueControl circuit: 0.8…1.2 Nm flat screwdriver 5 mmCircuit control: 0.8…1.2 Nm Philips no 1 screwdriver 5 mmPower circuit: 1.9…2.5 Nm flat screwdriver 6 mmPower circuit: 1.9…2.5 Nm Philips No 2 screwdrivers 6 mmPower circuit: 1.9…2.5 Nm pozidriv No 2 screwdrivers 6 mmwidth45 mmheight 154 mmdepth126 mmproduct weight0.9 kgCompatibility codeLUB

Read more less

Schneider Electric "SLIM" interface relay on screw base with LED and protection circuit, 24 V RSL1PVBU The Schneider Electric Slim RSL interface plug-in relay has a coil control voltage of 24 Vdc and has a SPDT (double throw single pole) switching contact rated at 6 Ampere. It has LED indicators and screw connectors. This slim interface plug-in relay reflects Schneider Electric's experience in the relay industry since 1924, helping to reduce cabinet size and at the same time increase machine reliability for industrial machinery, packaging, textile industry , HVAC, automation control panels, low/medium voltage distribution panels, motor controls, PLC interfaces, power supplies, building or medical equipment, lighting controls. It has a wide choice of contacts for high rated current use. It also offers an LED indicator and protection circuit. Technical dataProduct rangeHarmony Electromechanical Relaysrange nameInterface relayProduct type Pre-assembled plug-in relay with socketDevice nameRSLContact composition and type1 C/OContact operationStandardcontrol voltage [Uc]24 V DCConventional thermal current in enclosure [Ithe]6 A at -40…55 °CStatus LEDWithpin shapeFlat (PCB type) Type of fixingPlastic compression springmedium resistance3390 Ohm mains: DC at 23 °C +/- 10 % Rated insulation voltage [Ui]250 V conforming to IEC277 V conforming to cULRated impulse withstand voltage [Uimp]6 kV conforming to IECContact materialSilver alloy (AgSnO2)Rated operational current [Ie]6 A 1 C/O (AC -1/DC-1) IEC/UL compliantMinimum switching current100 mAmaximum switching voltage277 VMinimum switching voltage12 Vmaximum switching capacity1500 VA150 Wminimum switching capacity120 mWoperating rateMechanical durability10000000 cycleselectrical life60000 cycles for resistive load, 6 A at 250 V, AC-1operating time5 ms reset12 msmarkingCEprotection categoryRT IIItest levelsLevel A group mountingoperating positionAny positionheight78.6 mmwidth 6.2 mmdepth95 mmDescription of ISO terminals n°1(A1-A2)CO(11-12-14)OCsale indivisible quantity10product weight0.029 kgcurrent load6 A at 250 V AC Mounting distance of 0.5average absorption in W0.17 W, DCthreshold voltage dropout >= 0.05 Ucarrangement of contact terminalsSeparateconnections - terminalsScrew connectors, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 14) flexible with cable endScrew connectors, 1 x 0.2...1 x 2.5 mm² (AWG 24 ...AWG 14) solid without cable endtightening torqueSafety reliability dataB10d = 60000Control typeWithout buttonInstallation35 mm symmetrical DIN rail

Read more less

Schneider Electric ATV320 speed variator - 0.75kW - 380...500V - 3 phase - compact ATV320U07N4C The Altivar 320Schneider Electric speed variator is capable of powering 3-phase synchronous and asynchronous power motors with a nominal power of up to 0.75 kilowatts/1 horsepower and a nominal voltage of 380 to 500 Vac. This variable speed drive/frequency drive (VSD / VFD) is designed for simple industrial and commercial machines, such as packaging, material handling machinery, mechanical actuators and lifting devices. Its compact form factor allows you to reduce machine footprint by vertically stacking units in a machine frame. Advanced connectivity, including CANopen and Modbus, enables deep integration into automation architectures without the use of additional network equipment. Product Range: Altivar Machine ATV320Product Type: Variable speed driveProduct For Specific Applications: Complex MachinesVariant Version: standardDrive Format: CompactInstallation: Wall MountingPort Communication Protocol: Modbus serialCANopenNominal Power Voltage [Us]: 380...500 V - 15...10 %Nominal Output Current: 2, 3 A Technical characteristicsnumber of digital inputs7type of digital inputSTO safe torque off, 24 V DC, impedance: 1, 5 kOhmDI1...DI6 logic inputs, 24 V DC (30 V)DI5 programmable as pulse input: 0…30 kHz, 24 V DC (30 V)digital input logicPositive logic (source)Negative logic (current)number of digital outputs3type of digital outputOpen collector DQ+ 0…1 kHz 30 V DC 100 mAOpen collector DQ- 0…1 kHz 30 V DC 100 mAnumber of analog inputs3type of analog inputAI1 voltage: 0.. .10 V DC, impedance: 30 kOhm, 10 bit resolutionBipolar differential voltage AI2: +/- 10 V DC, impedance: 30 kOhm, 10 bit resolutionCurrent AI3: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other models for configuration), impedance: 250 Ohm, 10 bit resolutionnumber of analog outputs1type of analog outputCurrent configurable with AQ1 software: 0...20 mA impedance 800 Ohm, 10 bit resolutionVoltage configurable with AQ1 software: 0...10 V DC impedance 470 Ohm, 10 bit resolutionrelay output typeConfigurable relay logic R1A 1 NO electrical life 100000 cyclesConfigurable relay logic R1B 1 NC electrical life 100000 cyclesConfigurable relay logic R1CConfigurable relay logic R2A 1 NO electrical life 100000 cyclesConfigurable relay logic R2Cmaximum switching current: 3 A at 250 V AC on resistive load, cos phi = 1 R1A, R1B, R1C relay output: 3 A at 30 V DC on resistive load, cos phi = 1 R1A, R1B, R1C relay output: 2 A at 250 V AC on inductive load, cos phi = 0 ,4 and L/R = 7 ms R1A, R1B, R1C, R2A, R2C relay output: 2 A at 30 V DC on inductive load, cos phi = 0.4 and L/R = 7 ms R1A, R1B, R1C, R2A, R2C relay output: 5 A at 250 V AC on resistive load, cos phi = 1 R2A, R2C relay output: 5 A at 30V DC on resistive load, cos phi = 1 R2A, R2C relay outputminimum switching current: 5 mA at 24V DC R1A, R1B, R1C, R2A, R2C relay outputaccess method CANopen slave4 quadrant operation possibleTrueasynchronous motor control profileVoltage/frequency ratio, 5 pointsSensorless vector control, standardVoltage/frequency ratio - Energy saving, quadratic U/fSensorless vector control - Energy savingVoltage/frequency ratio, 2 pointsSynchronous motor control profileSensorless vector controltransient overtorque170…200 % of nominal motor torquemaximum output frequency0.599 kHzacceleration/deceleration rampsLinear USCUSRamp switchingAcceleration/deceleration ramp adaptationAutomatic acceleration/deceleration stop with DC injectionmotor slip compensationAny automatic loadAdjustable 0...300%Not available in voltage/frequency ratio (2 or 5 points)switching frequency2...16 adjustable kHz4...16 kHz with derating factornominal switching frequency4 kHzholding brakingWith injection DCIntegrated brake chopperTrueline current3.6 A at 380 V (heavy duty)2.8 A at 500 V (heavy duty)Maximum input current per phase3.6 AMaximum output voltage500 V apparent power2.4 kVA at 500 V (heavy duty)Mains frequency50...60 HzSymmetric relative mains frequency tolerance5 %Prospective line Isc5 kALoad current high-overload base7.1 Apower dissipation in W32.0 W fan: at 380 V, switching frequency 4 kHzWith function Safely Limited Speed ​​(SLS)TrueWith safety function Safe Brake Management (SBC/SBT)FalseWith safety function Safe Operating Stop (SOS)False With safety function Safe Position (SP)FalseWith safety function Safe Programmable LogicFalseWith safety function Safe Speed ​​Monitor (SSM)False With safety function Safe Stop 1 (SS1)TrueWith sft fct Safe Stop 2 (SS2)FalseWith safety function Safe Torque Off (STO)True With safety function Safe Limited Position (SLP)FalseWith safety function Safe Direction (SDI)Falsetype of protectionInterruption input phase: commandOvercurrent between output phases and earth : commandOverheating protection: commandShort circuit between phases of the motor: commandThermal protection: commandwidth105.0 mmheight 142.0 mmdepth158.0 mmproduct weight1.2 kg

Read more less

Schneider-electric Speed ​​variator ATV320U75N4B The Altivar 320 Schneider Electric variable speed drive is capable of powering 3-phase synchronous and asynchronous power motors with a nominal power of up to 7.5kilowatts/10 horsepower and a nominal voltage of 380 to 500Vac. This variable speed drive/frequency drive (VSD / VFD) is designed for simple industrial and commercial machines, such as packaging, material handling machinery, mechanical actuators and lifting devices. Its Book form factor helps reduce machine footprint, especially when mounted in an electrical cabinet next to other control devices such as PLCs, I/O units. Advanced connectivity, including CANopen and Modbus, enables deep integration into automation architectures without the use of additional networking equipment. Technical dataProduct rangeAltivar Machine ATV320Product typeVariable speedproduct for specific applicationsComplex machinesvariantStandard versionvariator formatBookInstallationWall mountport communication protocolSerial ModbusCANopenoption boardCommunication module, CANopenCommunication module , EtherCATCommunication module, Profibus DP V1Communication module, ProfinetCommunication module, Ethernet PowerlinkCommunication module, Ethernet/IPCommunication module, DeviceNetPower supply voltage nominal [Us]380...500 V - 15...10 %nominal output current17.0 Apower motor in kW7.5 kW for heavy dutyEMC filterClass C2 integrated EMC filterIP protection degreeIP20number of digital inputs7type of digital inputSTO safe torque off, 24 V DC, impedance: 1.5 kOhmDI1...DI6 logic inputs, 24 V DC (30 V)DI5 programmable as pulse input: 0…30 kHz, 24 V DC (30 V)digital input logicPositive logic (source)Negative logic (current)number of digital outputs3type of digital outputCollector open DQ+ 0…1 kHz 30 V DC 100 mAOpen collector DQ- 0…1 kHz 30 V DC 100 mAnumber of analogue inputs3type analog input voltageVoltage AI1: 0...10 V DC, impedance: 30 kOhm, resolution 10 bitBipolar differential voltage AI2: +/- 10 V DC, impedance: 30 kOhm, resolution 10 bitAI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other models per configuration), impedance: 250 Ohm, 10 bit resolution number of analogue outputs1type of analogue outputCurrent configurable with AQ1 software: 0...20 mA impedance 800 Ohm, resolution 10 bitVoltage configurable with software AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bitrelay output typeConfigurable relay logic R1A 1 NO electrical life 100000 cyclesConfigurable relay logic R1B 1 NC electrical life 100000 cyclesConfigurable relay logic R1CConfigurable relay logic R2A 1 NO electrical life 100000 cyclesConfigurable relay logic R2Cmaximum switching current: 3 A at 250 V AC on resistive load, cos phi = 1 R1A, R1B, R1C relay output: 3 A at 30 V DC on resistive load, cos phi = 1 R1A, R1B, R1C relay output: 2 A at 250 V AC on inductive load, cos phi = 0.4 and L/R = 7 ms R1A, R1B, R1C, R2A, R2C relay output: 2 A at 30 V DC on inductive load, cos phi = 0.4 and L/R = 7 ms R1A, R1B, R1C, R2A, R2C relay output: 5 A at 250 V AC on resistive load, cos phi = 1 R2A, R2C relay output: 5 A at 30 V DC on resistive load , cos phi = 1 R2A, R2C relay outputminimum switching current: 5 mA at 24 V DC R1A, R1B, R1C, R2A, R2C relay outputaccess method Slave CANopen4 quadrant operation possibleTrueasynchronous motor control profileVoltage/frequency ratio, 5 pointsControl Sensorless Vector, StandardVoltage/Frequency Ratio - Energy Saving, Quadratic U/fSensorless Vector Control - Energy SavingVoltage/Frequency Ratio, 2 PointsMotor Control Profile synchronousVector control without sensortransient overtorque170…200 % of nominal motor torquemaximum output frequency0.599 kHzacceleration/deceleration rampsLinearUSCUSRamp switchingmotor slip compensationAny automatic load Adjustable 0...300%Not available in voltage/frequency ratio (2 or 5 points)switching frequency2...16 kHz adjustable4...16 kHz with derating factornominal switching frequency4 kHzholding brakingWith DC injection line current26.5 A at 380 V (heavy duty)18.7 A at 500 V (heavy duty)Maximum Input Current per phase26.5 AMaximum output voltage500 Vapparent power16.2 kVA at 500 V (use heavy)Mains frequency50...60 HzIsc prospective line22 kApower dissipated in W229.0 W fan: at 380 V, switching frequency 4 kHz With safety function Safely Limited Speed ​​(SLS)TrueWith safety function Safe Brake Management (SBC/SBT)False With safety function Safe Operating Stop (SOS)FalseWith safety function Safe Position (SP)FalseWith safety function Logic programmable safeFalseWith Safe Speed ​​Monitor (SSM) safety functionFalseWith Safe Stop 1 (SS1) safety functionTrueWith sft fct Safe Stop 2 (SS2)FalseWith Safe Torque Off (STO) safety functionTrue With safety function Safe Limited Position (SLP)FalseWith safety function Safe Direction (SDI)Falsetype of protectionInput phase interruption: commandOvercurrent between output phases and earth  : commandOverheating protection: commandShort circuit between motor phases: commandThermal protection: commandwidth150 mmheight308.0 mmdepth 232.0 mmproduct weight4.4 kg

Read more less

Schneider-Electric universal power supply ABL8RPS24050 The Schneider Electric ABL8 regulated switching mode power supply provides direct current voltage, has a rated input of 100 to 500 Vac, a rated output current of 5 A at 24 Vdc and a rated power of 120 watts. PresentationProduct rangeModicon Power SupplyProduct typePower supplypower supply type Switching modeNominal input voltage100...120 V AC single phase, terminals: N-L1200...500 V AC phase to phase, terminals: L1-L2rated power in W 120 Woutput voltage 24 V DCoutput power supply current 5 Aadmissible temporary current amplification 1.5 x In (for 4 s)anti-harmonic filterLow frequency harmonic currentsTechnical characteristicsinput voltage limits85...132 V AC170...550 V ACinput current inrush 30 A18 mm modules0.51 at 240 V AC0.59 at 120 V ACefficiency 87 %Output voltage adjustment24...28, 8 V adjustablepower dissipated in W 15.5 WEquipment suppliedCorrector filter power factor compliant with IEC 61000-3-2output protection type Against overload, protection technology: manual or automatic resetAgainst overvoltage, protection technology: 30...32 V, manual resetAgainst short circuits, protection technology: manual or automatic resetAgainst undervoltage, protection technology: intervention with U Thermal, protection technology: automatic resetConnections - terminalsRemovable screw terminal block: 2 x 2.5 mm², for diagnostic relayScrew terminal blocks: 3 x 0.5...3 x 4 mm², (AWG 22...AWG 12) for input connectionScrew terminal blocks: 1 x 0.5... 1 x 4 mm², (AWG 22...AWG 12) for input earth connectionScrew terminal blocks: 4 x 0.5...4 x 4 mm², (AWG 22...AWG 12) for output connectionScrew terminal blocks: 1 x 0.5...1 x 4 mm², (AWG 22...AWG 12) for output grounding connectionStatus LED1 LED (green and red) output voltage1 LED (green, red and orange) output currentdepth125 mmheight143 mmwidth56 mm product weight0.7 kgoutput connectionParallelSeries

Read more less

Schneider-electric CANopen communication module  VW3A3608   The Altivar CANopen daisy chain communication module from Schneider Electric has 2 ports with RJ45 connectors. It complies with the CANopen Daisy Chain communication protocol. This communication module allows the integration of the drive into the CANopen daisy-chain process control network. Thanks to the removable modular design it is easy to install and remove from Altivar drives. It is compatible with Altivar Process ATV600 (ATV630, ATV650), Altivar Process ATV900 (ATV930, ATV950), Altivar Machine ATV320, Lexium 32, Altivar 32 and Altivar Machine ATV ATV340. Product rangeAltivarProduct typeCommunication moduleaccessories / element categoryAccessories communicationProduct compatibilityLexium 32Mrange compatibilityAltivar 32Altivar Machine ATV320Altivar Machine ATV340 except Sercos driveLexium 32Altivar Process ModularAltivar Process ATV900Altivar Process ATV600port communication protocolCANopen, CANmotionelectrical connection 2 RJ45 connectors

Read more less

Schneider Electric Switching power supplies, 100-240 V AC, 24 V 1.2 A, single phase, Modular ABLM1A24012 The ABLM regulated switching power supply (SMPS) provides direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 1.25A at 24V DC, and a rated power output of 30W. It is ideal for providing the DC voltage needed for automation equipment designed for industrial applications , commercial and residential. Examples: transportation, packaging, inspection, food and beverage, mining, oil and gas, and water. It is installed on an omega rail or fixed with a screw. Dimensions: Width 36mm, Height 91mm, Depth 55.6mm. Provides protection against overloads and short circuits with automatic restart after correction of the overload/short circuit source. Weight: 0.170kg. It is a rail mount industrial power supply. It complies with EN62368-1, ENIEC61010-1/2-201, ENIEC61204-3, EN61000-6-1/2/3/4, EN61000-3-2-3, UL62368-1, UL61010-2-201/ -1-201, CSAC22.2No62368-1/No61010-2-201/No61010-1. The product is CE, CUL, RCM and CB Scheme certified. The Acti9 iC60 range of miniature circuit breakers is recommended for its protection. The type of protection is 4A, curve B or C. On the front there is an LED indicating the presence of DC output voltage and a QR code for access to the latest technical documentation. Thanks to their modular housing, they can be installed in industrial enclosures or panels by clip fixing on an omega (DIN) rail. Provides energy to automated systems. Designed for simple machines and applications, modular power supplies are appreciated above all for their extreme compactness. Product Range Modicon Power SupplyProduct Type Power SupplyPower Supply Type Switching ModeVariant Option ModularMaterial Cassette PlasticNominal Input Voltage 100...240 V AC single phase100...240 V AC phase to phase Rated Power In W 30 WOutput Voltage 24 V DCOutput Power Supply Current 1.25 AVoltage Limits In Input 90...264 V ACNominal Network Frequency 50…60 HzMaximum Leakage Current 0.25 mA 240 V ACType of Protection Input Integrated fuse (not replaceable) 3.15 AExternal protection (recommended) 20 A Curve BExternal protection (recommended) 20 A Curve CExternal protection (recommended) ) 4 A Curve BExternal protection (recommended) 4 A Curve CInrush Current 25 A at 115 V50 A at 230 VModules 18 mm 0.48 at 115 V AC0.38 at 230 V ACEfficiency 87 % at 115 V AC87 % at 230 V ACOutput Voltage Adjustment 24...28 V

Read more less

Schneider-Electric auxiliary contacts fronta LADN22 LADN22 is an additional block of auxiliary contacts from Schneider Electric for TeSys D and TeSys F contactors. Front mounting block, it is equipped with 2NO+2NC instantaneous contacts up to 10 A 690 V AC. Can be used in safety applications thanks to certified NC mirror contacts. PresentationRangeTeSysTeSys DecaProduct nameTeSys DecaProduct type Auxiliary contact blockDevice nameLADNRange compatibilityTeSys D CADTeSys D LC1DTeSys F LC1FTeSys F CR1FTeSys Deca CADTeSys Deca LC1DInstallationFront sidePole contact composition2 NO + 2 NC Contacts operationInstantaneousRated operational voltage [Ue]690 V AC 25...400 HzRated operational current [Ie]6 A at 120 V AC-151.04 A at 690 V AC-150.55 A at 125 V DC-130.1 A at 600 V DC-13Rated insulation voltage [Ui]690 V conforming to IEC 60947-5-1600 V conforming to UL600 V conforming to CSAThermal current conventional in open air [Ith]10 A (at 60 °C)Reference standardsCEI EN 60947-5-1GB/T 14048.5Technical characteristicsRated making capacity Irms140 A AC conforming to IEC 60947-5-1250 A DC conforming to IEC 60947-5-1 Permissible temporary rated current100 A 60 °C 1 s120 A 60 °C 500 ms140 A 60 °C 100 msType of protectionGG fuse 10 AMechanical life30 McyclesMinimum switching current5 mAMinimum switching voltage17 V

Read more less

Schneider Electric M340 digital input module - 32 inputs - 24 V DC positive BMXDDI3202K The digital input module is part of the Modicon X80 modules. It has 32 isolated inputs and is powered by 24V DC. This input module with 40-way connectors is designed to be used in conjunction with the TeSys Quickfit mounting system. It occupies a single slot in the rack and has an enclosure that provides 20 protection to the electronics. Product Range Modicon Digital Input Type IsolatedInput Type Sink Current (Positive Logic)Digital Input Voltage 24V DC PositiveDigital Input Current 2.5 mAInput Compatibility With 2/3-wire proximity sensors conforming to IEC 60947-5-2With 2/3-wire proximity sensors conforming to IEC 61131-2 Type 1Sensor Power Supply 19...30 VCurrent State 1 Guaranteed >= 2 mACurrent State 0 Guaranteed Input Impedance 9600 OhmInsulation Resistance > 10 MOhm 500 V DCDissipated Power In W 3.9 WDc Typical Response Time 4 msDc Maximum Response Time 7 msParallelizing Inputs NoTypical Current Consumption 121 mA at 3.3 V DC

Read more less