POWER SUPPLIES

Schneider-Electric 24V 2.5A modular power supply ABLM1A24025 The ABLM regulated switching power supply (SMPS) provides direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 2.5A at 24V DC and a rated power output of 60W. It is ideal for providing the DC voltage needed for automation equipment designed for industrial applications , commercial and residential. PresentationProduct rangeModicon Power SupplyProduct typePower supplypower supply typeSwitching modeVariant optionModularNominal input voltage100...240 V AC single phase100...240 V AC phase to phasenominal power in W 60 Woutput voltage 24 V DCoutput power supply current 2.5 ATechnical characteristicsinput voltage limits90...264 V ACInput protection typeIntegrated fuse (non-replaceable) 3.15 AExternal protection (recommended) 20 A Curve BExternal protection (recommended) 20 A Curve CExternal protection (recommended) 10 A Curve BExternal protection (recommended) 6 A Curve CInrush current30 A at 115 V60 A at 230 V18 mm modules0.50 at 115 V AC0.39 at 230 V ACefficiency90 % at 115 V AC90 % at 230 V ACpower dissipated in W  6.5 Wcurrent absorptionTurn-on time Holding time> 20 ms 115 V AC> 60 ms 230 V ACStartup with capacitive loads3000 µFresidual ripplemean time between failures (MTBF)1300000 H at 25 °C, full load700000 H at 55 °C, 80 % loadoutput protection type Against overload and short circuits, protection technology: automatic resetAgainst over temperature, protection technology: manual resetAgainst overvoltage, protection technology: manual resetconnections - terminalsConnection to screw: 0.5...2.5 mm², (AWG 20...AWG 14) without wire end ferrule for outputScrew connection: 0.5...1.5 mm², (AWG 20. ..AWG 16) with wire end ferrule for outputScrew connection: 0.5...1.5 mm², (AWG 20...AWG 16) for inputline and load regulation Status LED1 LED (green) output voltagedepth55.6 mmheight 91 mmwidth53 mmproduct weight0.221 kgoutput connectionSerialParallelmounting supportTop hat type TH35 -15 rail conforming to IEC 60715Top hat type TH35-7.5 rail conforming to IEC 60715Double profile DIN railpanel mountingpower supplySELV conforming to IEC 60950-1 SELV compliant with IEC 60204-1SELV compliant with IEC 60364-4-41dielectric strength3000 V AC input / output

Read more less

Schneider Electric Power supply with comm. regulated - 1 or 2 phases - 100..240 V AC - 24 V - 20 A ABL8RPM24200   PresentationProduct rangeModicon Power SupplyProduct typePower supplypower supply typeSwitching modeNominal input voltage100...120 V AC single phase, terminals: N-L1200...240 V AC phase to phase, terminals: L1-L2nominal power in W480 Woutput voltage24 V DCoutput power supply current20 Aadmissible temporary current amplification1.5 x In (for 4 s )anti-harmonic filterLow frequency harmonic currentsTechnical characteristicsinput voltage limits85...132 V AC170.. .264 V ACinrush current30 A18 mm modules0.68 at 240 V AC0.69 at 120 V ACefficiency88 % Output voltage adjustment24...28.8 V adjustablepower dissipated in W57.6 Wequipment suppliedPower factor corrector filter compliant with IEC 61000-3-2output protection typeAgainst overload, protection technology: manual or automatic resetAgainst overvoltage, protection technology: 30...32 V, manual resetAgainst short circuits, protection technology: manual or automatic resetAgainst undervoltage, protection technology: tripping with U Thermal, protection technology: automatic reset connections - terminalsRemovable screw terminal block: 2 x 2.5 mm², for diagnostic relayScrew terminal blocks: 3 x 0.5...3 x 4 mm², (AWG 22 ...AWG 12) for input connectionScrew terminal blocks: 1 x 0.5...1 x 4 mm², (AWG 22...AWG 12) for input earth connectionTerminal blocks screw: 4 x 0.5...4 x 4 mm², (AWG 22...AWG 12) for output connectionStatus LED1 LED (green and red) output voltage1 LED (green, red and orange) output currentdepth145 mmheight125 mmwidth146 mmproduct weight1.6 kg output connectionSeriesParallelmarkingCEmounting support35 x 7.5 mm symmetrical DIN rail35 x 15 mm symmetrical DIN railoperating positionVerticalpower supplySELV conforming to IEC 60950-1SELV conforming to IEC 60204-1SELV conforming to IEC 60364-4-41 dielectric resistance2500 V with between input and ground insulation3000 V with between input and output insulation500 V with between output and ground insulation

Read more less

SIEMENS SITOP PSU100S 24 V/10 A 6EP13342BA20 SITOP PSU100S 24 V/10 A stabilized power supply input: AC 120/230 V output: DC 24 V/10 A. General information: Entrance: Form of the electrical network Single-phase ACsupply voltage at AC● initial value Automatic range switchingsupply voltage● 1 at AC rated value 120 V ● 2 with AC 230 V rated valueinput voltage● 1 with AC 85 ... 132 V● 2 with AC 170 ... 264 Vinput design wide input range Nooverloadability due to overvoltage 2.3 x Ue nom, 1.3 msbackup operating condition due to lack ofmains voltage With Ue = 93/187 Vbackup time with rated value of theoutput current in case of mains voltage failure min. 20 msbackup operating condition due to lack of mains voltage             With Ue = 93/187 Vmains frequency● 1 nominal value 50 Hz● 2 value rated 60 Hzmains frequency 47 ... 63 Hzinput current● at rated input voltage 120 V 4.49 A● at rated input voltage 230 V 1.91 Acurrent limitation of the inrush current at 25 °C max. 60 AI2t value max. 5.6 A²·sexecution of protection T 6.3 A/250 V (not accessible)● of the mains cable Recommended circuit breaker: apart. from 10 A characteristic COutputshape of the voltage curve at the output regulated potential-free DC voltageoutput voltage with DC rated value 24 V output voltage ● at output 1 with DC nominal value 24 Vrelative overall voltage tolerance 3 %relative control accuracy of the output voltage● with slow fluctuation of the input voltage 0.1 % ● with slow ohmic load fluctuation 1 %residual ripple● max. 150 mV● typ. 20 mVpeak voltage● max. 240 mV● typ. 160 mVoutput voltage adjustable 22.8 ... 28 Vproduct function output voltage adjustable Yestype of setting of the output voltage Via potentiometerdisplay execution for normal operation LED green for 24 V O.K.type of signal at the output Relay contact (open contact, loadability DC 60 V/0.3 A) for "24 V O.K."progression of the output voltage at switch-on Overshoot of Ua max. intervention delay 0.3 svoltage rise time of the output voltage● typ. 20 msoutput current● rated value 10 A● rated range 0 ... 12 A; 12 A ... +45 °C; +60 ... +70 °C: Derating 3%/Kexported active power typ. 288 Wshort-time overload current● in case of short circuit during normal starting typ. 32 A● in the event of a short circuit during typical operation. 32 Aduration of overloadability due to overcurrent● in case of short circuit during start-up 1 000 ms● in case of short circuit during operation 1 000 msproduct characteristic● parallel connection of equipment Yesnumber of equipment connected in parallel for power increase2Efficiencyefficiency [%] 90 %power dissipated [W]● with nominal value of the output voltage with nominal valueof the output current typ. 25 WRegulationrelative regulation accuracy of the output voltage withrapid input voltage fluctuation of +/- 15 % typ.0.3 %relative regulation accuracy of the output voltage withstep variation of the ohmic load 10/90/10 % typ. 3 %

Read more less

SIEMENS SITOP PSU200M 10A  6EP13343BA10 SITOP PSU200M 10 A stabilized power supply input: AC 120/230 ... 500 V output: DC 24 V/10 A   *Ex approval no longer available* EntranceSingle-phase and two-phase AC electrical network shapesupply voltage with AC● Initial value Setting by switch on the devicesupply voltage● 1 with AC 120 ... 230 V● 2 with AC 230 ... 500 Vinput voltage● 1 with AC 85 ... 264 V● 2 with AC 176 ... 550 VInput execution wide-range input YesOvervoltage overload capability 1300 Vpeak, 1.3 msoperating condition of the buffer due to lack ofmains voltageWith Ue = 120/230 V, typ. 150 ms with Ue = 400 Vbuffering time with nominal current valueoutput in case of mains voltage failure min.25 msoperating condition of the buffer due to lack ofmains voltageWith Ue = 120/230 V, typ. 150 ms with Ue = 400 Vnetwork frequency● 1 nominal value 50 Hz● 2 nominal value 60 HzMains frequency 47 ... 63 Hzinput current● with input voltage rating 120V 4.4A● with input voltage rating 230 V 2.4 A● with input voltage rating 500V 1.1Acurrent limitation of the inrush current at 25 °C max. 35 AI2t value max. 4 A² sexecution of protection T 6.3 A (not accessible)● of the network cable Circuit breaker recommended for single-phase operation: apart.from 6 A (10 A) characteristic C (B); required for two-phase operation:magnetothermal switch with bipolar coupling or switchautomatic 3RV2011-1EA10 (set to 3.8 A) or 3RV2711-1ED10 (UL489) with 230 V, 3RV2011-1DA10 (setting to 3 A) or 3RV2711-1DD10(UL 489) with 400/500 VExitshape of the voltage curve at the output of the regulated DC voltage at free potentialOutput voltage with DC nominal value 24 Voutput voltage● on output 1 with DC nominal value 24 Voverall relative voltage tolerance 3 %relative regulation accuracy of the output voltage● with slow fluctuation of input voltage 0.1%

Read more less

SIEMENS SITOP PSU200M 5 A 6EP13333BA10 SITOP PSU200M 5 A stabilized power supply input: AC 120/230 ... 500 V output: DC 24 V/5 A *Ex approval no longer available* Inputform of the electrical network Single-phase and two-phase ACsupply voltage with AC● initial value Setting via switch on the equipment; start from EU >90/180 V supply voltage● 1 at AC 120 ... 230 V● 2 at AC 230 ... 500 V input voltage● 1 at AC 85 ... 264 V● 2 at AC 176 ... 550 V input implementation wide-range input Yesoverload capability for overvoltage 1300 Vpeak, 1.3 ms backup operating condition due to lack of mains voltageWith Ue = 120/230 V, typ. 150 ms with Ue = 400 Vbuffering time with nominal value of the output currentin case of mains voltage failure min. 25 ms backup operating condition due to lack ofmains voltageWith Ue = 120/230 V, typ. 150 ms with Ue = 400 V mains frequency● 1 nominal value 50 Hz● 2 nominal value 60 Hzmains frequency 47 ... 63 Hz input current● at rated input voltage 120 V 2.2 A● at rated input voltage 230 V 1, 2 A● at nominal value of the input voltage 500 V 0.61 Acurrent limitation of the inrush current at 25 °C max. 35 AI2t value max. 1.7 A²·s execution of protection T 3.15 A (not accessible)● of the mains cable Recommended thermomagnetic switch for single-phase operation: separately from 6 A (10 A) characteristic C (B); required for two-phase operation:thermic circuit breaker with bipolar coupling or automaticbreaker 3RV2011-1EA10 (setting to 3.8 A) or 3RV2711-1ED10 (UL489) with 230 V, 3RV2011-1DA10 (setting on 3 A) or 3RV2711-1DD10(UL 489) with 400/500 VOutputshape of the voltage curve at the output regulated potential-free direct voltage Output voltage with DC rated value 24 V output voltage● at output 1 with DC nominal value 24 Vrelative overall voltage tolerance 3 %relative control accuracy of output voltage  

Read more less

SIEMENS SITOP PSU200M 24V/10A, VARNISHED PCB 6EP1334-3BA10-8AB0 SITOP PSU200M plus 10 A Stabilized power supply input: AC 120 ... 230/230 ... 500 V output: DC 24 V/10 A variant with protective paint. General information: EntranceSingle-phase and two-phase AC electrical network shapesupply voltage with AC● Initial value Setting by switch on the devicesupply voltage● 1 with AC 120 ... 230 V● 2 with AC 230 ... 500 Vinput voltage● 1 with AC 85 ... 264 V● 2 with AC 176 ... 550 VInput execution wide-range input YesOvervoltage overload capability 1300 Vpeak, 1.3 msoperating condition of the buffer due to lack of  mains voltageWith Ue = 120/230 V, typ. 150 ms with Ue = 400 Vbuffering time with nominal current valueoutput in case of mains voltage failure min.25 msOperating condition of the buffer due to lack of mains voltageAt Ue = 120/230 V, typ. 150 ms at Ue = 400 V mains frequency● 1 nominal value 50 Hz● 2 nominal value 60 HzMains frequency 47 ... 63 Hzinput current● with input voltage rating 120V 4.4A● with input voltage rating 230 V 2.4 A● with input voltage rating 500V 1.1Acurrent limitation of the inrush current at 25 °C max. 35 AI2t value max. 4 A² sexecution of protection T 6.3 A (not accessible)● of the network cable Circuit breaker recommended for single-phase operation: apart.from 6 A (10 A) characteristic C (B); required for two-phase operation:magnetothermal switch with bipolar coupling or switchautomatic 3RV2011-1EA10 (set to 3.8 A) or 3RV2711-1ED10 (UL489) with 230 V, 3RV2011-1DA10 (set to 3 A) or 3RV2711-1DD10 (UL 489) with 400/500 V Exitshape of the voltage curve at the output of the regulated DC voltage at free potentialOutput voltage with DC nominal value 24 Voutput voltage● on output 1 with DC nominal value 24 Voverall relative voltage tolerance 3 %relative regulation accuracy of the output voltage.

Read more less

FINDER SWITCHING POWER SUPPLY 60W 24VDC (2.5A) 786012302402 The Type 78.60 is a low profile modular power supply with 24 V DC output at 60 W for electrical cabinets. Equipped with ZVS (Zero-voltage-switching) technology and suitable for SELV systems (according to EN 60950). Features: High efficiency (up to 91%) and low stand-by consumption ( Small dimensions: 70 mm (4 modules) wide, 61 mm deep Internal thermal protection, with output shutdown Short circuit protection: Hiccup mode (automatic recovery) Overvoltage protection: Varistor Complies with EN 60950-1 and EN 61204-3 standards ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, roller shuttersCranesControl panels, distributionPump control panels

Read more less

FINDER SWITCHING POWER SUPPLY 25W 24VDC 1A 782512302400 Switching power supply power absorption: 56.4 VA. suitable for series installation: yes suitable for safety functions: no width in division units: 2 type of supply voltage: AC/DC power output: 25 W. regulated output voltage: no Electrical connection: screw connection mounting on carrier rail possible: yes wall mounting possible: no stabilized: yes 1st output voltage: 24 V. adjustable output voltage: no nominal supply voltage for AC 50 Hz: 110 to 240 V. nominal supply voltage for DC: 220 V. short-circuit proof: yes performance level according to EN ISO 13849-1: without max. output current 1: 1 A. rated value output voltage 1: 24 V. rated value output current 1: 0.75 A. SIL according to IEC 61508: without Degree of protection: IP20 Features: – Low consumption in stand-by (– Internal thermal protection, with output shutdown– Short circuit protection: Hiccup mode(automatic recovery)– Overvoltage protection: Varistor– Flyback circuit type– Compliant with EN 60950-1 and EN 61204-3 standards– Parallel connection for automaticredundancy: with OR-IN– Dual and series connection– Suitable for mounting on 35 mm rail (EN 60715) Also available in the version78.25….1200 with 12 V DC output, 25 W ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, roller shuttersCranesControl panels, distributionPump control panels

Read more less

FINDER SWITCHING POWER SUPPLY 25W 12VDC 2A 782512301200 Switching power supply power absorption: 56 VA. suitable for series installation: yes suitable for safety functions: no width in subdivision units: 2 type of supply voltage: AC/DC power output: 25 W. regulated output voltage: no Electrical connection: screw connection mounting on carrier rail possible: yes wall mounting possible: no stabilized: yes 1st output voltage: 12 V. adjustable output voltage: no nominal supply voltage for AC 50 Hz: 110 to 240 V. nominal supply voltage for DC : 220 V. short-circuit proof: yes performance level according to EN ISO 13849-1: without max. output current 1: 2.1 A. rated value output voltage 1: 12 V. rated value output current 1: 1 A. SIL according to IEC 61508: without Degree of protection: IP20. Features: – Low consumption in stand-by (– Internal thermal protection, with output shutdown– Short circuit protection: Hiccup mode(automatic recovery)– Overvoltage protection: Varistor– Flyback circuit type– Compliant with EN 60950-1 and EN 61204-3 standards– Parallel connection for automaticredundancy: with OR-IN– Dual and series connection– Suitable for mounting on 35 mm rail (EN 60715) Also available in the version78.25….1200 with 12 V DC output, 25 W ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, roller shuttersCranesControl panels, distributionPump control panels

Read more less

FINDER SWITCHING POWER SUPPLY 12W 12VDC (1A) 781212301200 Switching power supply power absorption: 32 VA. suitable for series installation: yes suitable for safety functions: no width in subdivision units: 1 type of supply voltage: AC/DC power output: 12 W. regulated output voltage: yes Electrical connection: screw connection mounting on carrier rail possible: yes wall mounting possible: no stabilized: yes 1st output voltage: 12 V. adjustable output voltage: no nominal supply voltage for AC 50 Hz: 110 to 240 V. nominal supply voltage for DC : 220 V. short-circuit proof: yes performance level according to EN ISO 13849-1: without max. output current 1: 1.25 A. rated value output voltage 1:12 V. rated value output current 1: 1 A. SIL according to IEC 61508: without Degree of protection: IP20 Features: Low stand-by power consumption ( Internal thermal protection, with output shutdown Short circuit protection: Hiccup mode (automatic recovery) Overvoltage protection: Varistor Flyback circuit type Complies with EN 60950-1 and EN 61204-3 standards Parallel connection for automatic redundancy: with OR-IN diode Dual and series connection Suitable for mounting on 35 mm rail (EN 60715) Versions also available:-78.12….1200 with 12 V DC output. 12 W, for general applications with 12 V DC loads-78.12….2402 with 24 V DC output, 12 W, SELV, LED Modular driver with 24 V DC output Applications Building automation Elevators - elevators Automation of awnings, shutters, roller shutters Crane Control panels, distribution Pump control panels

Read more less

SIEMENS SITOP PSU8200 6EP1336-3BA10 SITOP PSU8200 20 A stabilized power supply input: AC 120 ... 230 V DC 110 ... 220 V output: DC 24 V/20 A *Ex approval no longer available* The SITOP modular single-phase power supplies are technological power supplies for sophisticated solutions that offer maximum functionality for use in complex systems and machines. The wide-range input allows connection to any network in the world and guarantees great safety even in the presence of strong voltage fluctuations. The Power-Boost briefly supplies up to three times the nominal current. And in the event of overload, you can choose between constant current and latching shutdown. The very high efficiency reduces energy consumption and heat generation in the control cabinet, and the compact metal housing saves space. To further increase the availability of the 24 V, SITOP modular power supplies can be combined with buffer modules, DC- USV, redundancy and selective. Entrance Power grid form: Single-phase and two-phase AC or DC Supply voltage at AC min. nominal value: 120 V Supply voltage at AC max. nominal value: 230 V Supply voltage at AC initial value: 85 V Supply voltage at AC final value: 275 VSupply voltage with DC: 110 ... 220 VInput voltage at DC: 88 ... 350 V Input design wide-range input: YesOperating condition of the buffering in the event of a mains voltage failure: At Ue = 230 V Buffering time with nominal value of the output current in the event of a mains voltage failure min.: 20 msOperating condition of the buffering due to lack of mains voltage: With Ue = 230 VMains frequency 1 rated value: 50 Hz Mains frequency 2 rated value: 60 HzMains frequency: 47 ... 63 HzInput current at rated input voltage 120 V: 4.6 A Input current at rated input voltage 230 V: 2.5 A Current limitation of the inrush current at 25 °C max.: 20 AMax. I2t value: 5 A²·sProtection Execution: Yesof the mains cable: Recommended circuit breaker for single-phase operation: 10 Afeature C; required for two-phase operation: circuit breaker with bipolar coupling or circuit breaker3RV2711-1HD10(UL 489) with 120 V or 3RV2711-1ED10 (UL 489) with 230V

Read more less

SIEMENS SITOP PSU300S 40A  SIEMENS SITOP PSU300S STABILIZED POWER SUPPLY  6EP1437-2BA20 *Ex approval no longer available* The three-phase SITOP smart are the universal and high-performance standard power supplies for machine and plant construction. Despite their compact design, they have an excellent overload characteristic: Thanks to the 150% Extra Power, loads with high current consumption can be switched on without any problem and the continuous overload capability of 120% offers power reserves for possible expansions. The high efficiency guarantees low energy consumption and reduced heat generation in the electrical panel. To further increase the availability of 24 V, SITOP smart power supplies can be combined with buffer, DC-USV, redundancy and selective modules. Regardless of the industry and requirements, Siemens offers reliable and efficient power supplies for every installation. Type of supply voltage: ACOutput voltage 1: 24...24 VMax. Output current 1: 40 AAdjustable output voltage: yesOutput voltage rating 1: 24 VOutput current rating 1: 40 AShort-proof circuit: yesRated AC supply voltage 50 Hz: 400...400 VNominal AC supply voltage 60 Hz: 500...500 VStabilised output voltage: yesPower consumption: 89 VAOutput power: 960 WStabilised: yesType of electrical connection: Screw connectionPossibilities rail mounting: yesWall mountable: noSuitable for modular mounting: yesRecessing width: 145 mmRecessing height: 225 mmDirect mounting possible: noWidth: 145 mmHeight: 145 mmDepth: 150 mmProtection degree (IP): IP20

Read more less