Digital I/o Modules for Plc

SIEMENS DIGITAL OUTPUT SM 1226, F-DQ 4X 24VDC 6ES7226-6DA32-0XB0 SIMATIC S7-1200, digital output module SM 1226, F-DQ 4x DC 24V 2A, PROFIsafe, width 70mm, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508) . General information:Product type designation SM 1226 F-DQ 4 x 24 VDC Supply voltageAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VVoltage supply required according to NEC class 2 No Input currentfrom backplane bus DC 5 V, max. 125 mA Digital outputs● from load voltage L+, max. 170 mA Power dissipationPower dissipation, typ. 8 W Digital outputsNumber of outputs 4● in groups of 1Short circuit protection Yes Interrupting capacity of outputs● with ohmic load, max. 30 Hz● with lamp load, max. 10Hz Output voltage ● Nominal value (DC) 24 V Output current● for signal "1" rated value 2 A● for signal "1" permissible range, max. 10 mA ... 2.4 A● for signal "0" residual current, max. Switch on PNP: 0.5 mA, max.; NPN switch: 0.5 mA, max. Cable length● with shielding, max. 200 m● unshielded, max. 200 m Alarms/diagnostics/status informationDiagnostic display LED● for output status Yes Degree of protection and safety classIP protection degree IP20Standards, approvals, certificatesCE mark YescULus Yes FM approval YesMaximum safety class achievable in safety operation● Performance Level according to ISO 13849-1 Category 4, PL e● SIL according to IEC 61508 SIL 3

Read more less

SIEMENS DIGITAL INPUT SM 1221  6ES7221-1BH32-0XB0 Digital input unit SM 1221, 16DI, DC 24V, Sink/Source. General informationProduct type designation SM 1221, DI 16x24 VDCSupply voltageNominal value (DC) 24 VPermissible range, lower limit (DC) 20.4 VPermissible range, upper limit (DC) 28.8 VInput currentfrom backplane bus 5 V DC, max. 130 mA Digital inputs● from load voltage L+ (no load), max. 4 mA; per channeloutput voltage / headertransmitter supply voltage / header● present Yes Power dissipatedPower dissipation, typ. 2.5 WDigital inputs Number of entrances 16● in groups of 4 Input characteristic according to IEC 61131, Type 1 YesNumber of inputs that can be managed simultaneouslyall installation positions— up to 40 °C, max. 16 Horizontal mounting position— up to 40 °C, max. 16— up to 50 °C, max. 16 Vertical mounting position— up to 40 °C, max. 16 Input voltage● Rated value (DC) 24 V● for signal "0" 5 V DC with 1 mA● for signal "1" DC 15 V with 2.5 mA Input current● for signal "0", max. (permissible quiescent current) 1 mA● for signal "1", min. 2.5 mA● for signal "1", typ. 4 mA Delay in entry (with nominal input voltage value)for standard inputs— parameterizable Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of 4 for alarm inputs.

Read more less

SIEMENS S7-1500, DI 32X24VDC HF 6ES7521-1BL00-0AB0 SIMATIC S7-1500, DI 32xDC 24V HF digital input module, 32 channels in groups of 16; of which 2 inputs can be used for counting; input delay 0.05..20ms input type 3 (IEC 61131); diagnostics; Process interrupt: front connector (screw terminals or push-in) to be ordered separately. General informationProduct type designation DI 32x24VDC HFHardware version from FS04Firmware version V2.2.1● FW update possible YesProduct function● I&M data Yes; I&M0 ... I&M3● Isochronous operation Yes● Prioritized start Yes Engineering with● STEP 7 TIA Portal configurable/integrated from theversionV13 SP1 / -● STEP 7 configurable/integrated from version V5.5 SP3 / -● PROFIBUS from version GSD/GSD revision V1.0 / V5.1● PROFINET from GSD version/GSD revision V2.3 / - Operating mode● DI Yes● Counter Yes● Oversampling No● MSI Yes Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC ) 28.8 VReverse polarity protection Yes Input currentCurrent consumption, max. 40mA; 20 mA each group with DC 24 V supply voltage PowerPower draw from backplane bus 1.1 WPower lossPower loss, typ. 4.2 WDigital inputs Number of inputs 32parameterizable digital inputs YesRead on m/p Read on PInput characteristic according to IEC 61131, Type 3 Yes Digital input functions, parameterizable● Gate start/stop Yes● Digital input freely usable Yes

Read more less

BALLUFF BNI006A Network module for Ethernet/IP BNI EIP-508-105-Z015 Interface: EtherNet/IP Operating voltage UB: 18...30.2 VDC Connection (COM 1): M12x1-Socket, 4-pole, D-coded Connection (COM 2): M12x1-Socket, 4-pole, D-coded Connection (power supply IN): 7/8" plug, 4-pole Connection (power supply OUT): 7/8" socket, 4-pole Slo connection: t8x M12x1-Socket, 5-pole, A-coded Digital inputs: 16x PNP, type 3 Digital outputs: 16x PNP Configurable inputs/outputs: yes Max. output current: 2 A short-circuit proof and overload-proof Summative current US, sensor: 9.0 A Summation current UA, actuator: 9.0 A Housing material: Zinc, Die cast Dimension: 68 x 37.9 x 224 mm Ambient temperature: -5...70 °C Protection rating: IP67 Additional interfaces: 8x IO-Link IO-Link version: 1.1 Port class: Type A

Read more less

SIEMENS SIMATIC S7-1500 (DC 24 V - 130MA) 6ES75262BF000AB0 Digital output module F, F-DQ 8x 24VDC 2A PPM PROFIsafe; width built 35mm; up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General informationProduct type designation: F-DQ 8x24VDC/2A PPM Possible FW update: Yes Supply voltage Rated value (DC): 24 V Allowable range, lower limit (DC): 19.2 V Allowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Voltage supply required according to NEC class 2: NOInput current Current consumption (nominal value):Current consumption, max.:130 mA; without load Power loss Power loss, typ.: 11 W

Read more less

Siemens Simatic DP, electronics module for ET 6ES71366DB000CA0 Electronics module for ET 200SP, F-DQ 4x24VDC/2A, 15mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508). General informationProduct type designation: F-DQ 4x24VDC/2A PM HFUsable BaseUnits: BU type A0 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Required voltage supply according to NEC class 2: NOInput current Current consumption (nominal value): 75 mA; without loadCurrent consumption, max.: 21 mA; from the backplane bus Power dissipation Power dissipation, typ.: 4 W

Read more less

Siemens Simatic ET 200SP PLC 6ES7132-6BH01-0BA0 Digital output module, DQ 16x 24V DC/0.5A Standard, Source Output (PNP, P-switching) Packaging unit: 1 piece suitable for BU type A0, Color code CC00, substitute value output , Diagnostics module for: Short circuit to L+ and M, wire break, supply voltage General informationProduct type designation: DQ 16x24VDC/0.5A STHardware version: From FS03Firmware version: V0.0● Possible FW update NoUsable BaseUnits: BU type A0Color code for module-specific color coding label: CC00 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC):: 28.8 VReverse protection polarity: Yes Input current Current consumption, max. 60mA; without load Power dissipated Power dissipation, typ. 1 W

Read more less

Siemens Simatic DP, electronics module for ET  6ES71366BA010CA0 Electronics module for ET 200SP, F-DI 8x 24VDC HF, width 15mm, up to PLe (ISO 13849-1)/ SIL 3 (IEC 61508). General informationProduct type designation: F-DI 8x24VDC HFPossible FW update: SI Usable BaseUnits: BU type A0 Color code for module-specific color coding label: CC01 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesVoltage supply required according to NEC class 2: No Input current Current consumption, max.: 40 mA; without load Power dissipated Power dissipation, typ.: 2 W

Read more less

SIEMENS SIMATIC S7-300 6ES73211BL000AA0 Digital input module SM 321, electrically isolated 32DE, 24V DC, 1 x 40-pole. Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 20.4 VAllowable range, upper limit (DC): 28.8 V Input current from backplane bus DC 5 V, max.: 15mA Power dissipated Power dissipation, typ.: 6.5 W

Read more less

SIEMENS SIMATIC DP 6ES7-136-6DC00-0CA0 SIMATIC DP, electronics module ET 200SP, F-DQ 8X24VDC/0.5A PP, width 15mm, up to PL E (ISO 13849) up to SIL 3 (IEC 61508) With the SIMATIC ET 200SP, Siemens offers a distributed, multifunctional I/O system that can be easily put into operation thanks to its space-saving design. It is approved for IP20 protection and designed for installation in a compact distribution box. The system ensures maximum flexibility, allowing modules to be replaced quickly and easily at any time thanks to Multi Hot Swapping. Furthermore, the SIMATIC ET 200SP offers you a wide range of communication channels, both diverse and fast. Thanks to the integration of the IM155-6MF MultiFieldbus interface module, you can always react flexibly and use the optimal protocol for your application, as this function supports different Ethernet protocols. Assembly and service are simplified by a uniform identification system, based on reference identification plates and color-coded pin assignment. Siemens ensures you future-proof systems with the integration of innovative and at the same time long-lasting automation products, in fact as industry experts you are already investing today in the technologies of tomorrow and thus redefining market standards. The continuous availability of data, the flexibility of the application cases and the versatile integration options ensure the excellent performance of the ET 200 products. The scalable and cost-optimized configuration of an ET 200SP station is ensured by the wide range of I/O modules. In addition to digital and analog input and output modules, fail-safe variants are also available for applications up to SIL 3 / PLe. This also applies to integrated motor starters, which are suitable for motors up to 5.5 kW. Energy meters for measuring and analyzing energy consumption, IO-Link master (V1.1.) as well as many other communication and technology modules allow you to adapt the system to every automation task. The accessories available for ET 200SP range from colored and non-coloured reference identification plates to marking labels for individual modules and ensure maximum visibility in the electrical panel. General Information Product type designation: F-DQ 8x24 VDC/0.5 A PP HFFirmware update possible: YesUsable BaseUnits: BU type A0Color code for coding plate a module specification colors: CC02 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesVoltage supply required according to NEC class 2: No Input Current Current consumption (nominal value): 75 mA; without loadCurrent consumption, max.: 21 mA; from the backplane bus Output voltage / header Rated value (DC): 24 V PowerPower draw from backplane bus: 70 mW Power dissipationPower dissipation, typ. 3 W

Read more less

SIEMENS SIMATIC DP (DC 24 V - 21 MA) 6ES7-136-6BA00-0CA0 Electronics module for ET 200SP, F-DI 8x 24VDC HF, 15mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General information Product type designation F-DI 8x24VDC HFUsable BaseUnits BU type A0 Product function● I&M data Yes; I&M0 ... I&M3 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection YesVoltage supply required according to NEC class 2 No Input current Current consumption (nominal value) 75 mA; without loadCurrent consumption, max. 21 mA; from the backplane bus Power Power draw from the backplane bus 70 mW Power dissipated Power dissipation, typ. 4 W

Read more less

SIEMENS SIMATIC ET 200SP   (DC 24 V - 35 mA without load) 6ES71326BF010BA0 Digital output module, DQ 8x 24V DC/0.5A Standard, Source Output (PNP, P-switching) Packaging unit: 1 piece suitable for BU type A0, Color code CC02, substitute value output , Diagnostics module for: Short circuit to L+ and M, wire break, supply voltage. General information:Product type designation: DQ 8x24VDC/0.5A STHardware version: From FS02Firmware version: V0.0Possible FW update: NoUsable BaseUnits: BU type A0Color code for module-specific color coding label: CC02 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YES Input current Current consumption (nominal value): 35 mA; without load Power dissipated Power dissipation, typ.: 1 W

Read more less