SIEMENS SIMATIC S7-1500 (DC 24 V - 130MA) 6ES75262BF000AB0 Digital output module F, F-DQ 8x 24VDC 2A PPM PROFIsafe; width built 35mm; up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General informationProduct type designation: F-DQ 8x24VDC/2A PPM Possible FW update: Yes Supply voltage Rated value (DC): 24 V Allowable range, lower limit (DC): 19.2 V Allowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Voltage supply required according to NEC class 2: NOInput current Current consumption (nominal value):Current consumption, max.:130 mA; without load Power loss Power loss, typ.: 11 W

Read more less

SIEMENS SIMATIC S7-1500 6ES75261BH000AB0 Digital input module F, F-DI 16x 24VDC PROFIsafe; width built 35mm; up to PL E (ISO 13849-1)/ SIL 3 (IEC 61508) General informationProduct type designation: F-DI 16x24VDCPossible FW update: Yes Supply voltage Rated value (DC): 24 V Permissible range, lower limit (DC): 19.2 V Permissible range, upper limit (DC): 28, 8 VReverse polarity protection: YesVoltage supply required according to NEC class 2: NOInput current Current consumption (nominal value): 50 mA; without loadCurrent consumption, max.: 60 mA; without loadPower loss Power loss, typ.: 4.6 W

Read more less

Siemens Simatic DP, electronics module for ET 6ES71366DB000CA0 Electronics module for ET 200SP, F-DQ 4x24VDC/2A, 15mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508). General informationProduct type designation: F-DQ 4x24VDC/2A PM HFUsable BaseUnits: BU type A0 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Required voltage supply according to NEC class 2: NOInput current Current consumption (nominal value): 75 mA; without loadCurrent consumption, max.: 21 mA; from the backplane bus Power dissipation Power dissipation, typ.: 4 W

Read more less

Siemens Simatic ET 200SP PLC 6ES7132-6BH01-0BA0 Digital output module, DQ 16x 24V DC/0.5A Standard, Source Output (PNP, P-switching) Packaging unit: 1 piece suitable for BU type A0, Color code CC00, substitute value output , Diagnostics module for: Short circuit to L+ and M, wire break, supply voltage General informationProduct type designation: DQ 16x24VDC/0.5A STHardware version: From FS03Firmware version: V0.0● Possible FW update NoUsable BaseUnits: BU type A0Color code for module-specific color coding label: CC00 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC):: 28.8 VReverse protection polarity: Yes Input current Current consumption, max. 60mA; without load Power dissipated Power dissipation, typ. 1 W

Read more less

Siemens Simatic DP, electronics module for ET  6ES71366BA010CA0 Electronics module for ET 200SP, F-DI 8x 24VDC HF, width 15mm, up to PLe (ISO 13849-1)/ SIL 3 (IEC 61508). General informationProduct type designation: F-DI 8x24VDC HFPossible FW update: SI Usable BaseUnits: BU type A0 Color code for module-specific color coding label: CC01 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesVoltage supply required according to NEC class 2: No Input current Current consumption, max.: 40 mA; without load Power dissipated Power dissipation, typ.: 2 W

Read more less

SIEMENS SIMATIC S7-1500 6ES7522-1BL01-0AB0 DQ 32xDC 24V/0.5A HF digital output module; 32 channels in groups of 8; 4A for each group; single channel diagnostics; substitute value, operating cycle counter for the connected actuators. The unit supports the safe disconnection of load groups up to SIL2 according to EN IEC 62061:2021 and category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw or push-in terminals) to be ordered separately. General informationProduct type designation: DQ 32x24VDC/0.5A HFHardware version: From FS02Firmware version: V1.1.0Product function● I&M data: Yes; I&M0 ... I&M3● Isochronous operation: Yes● Prioritized startup: YesEngineering with● STEP 7 TIA Portal configurable/integrated from version: V13 SP1 / -● STEP 7 configurable/integrated from version: V5.5 SP3 / -● PROFIBUS from GSD version/GSD revision: V1.0 / V5.1● PROFINET from GSD version/GSD revision: V2.3 / -Operating mode● DQ: Yes● DQ with power saving function: No● PWM: No● Cam control (switching to comparison values): No● Oversampling: No● MSO: Yes● Integrated switching cycle counter: Yes Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes; by internal protection with 7 A per group Input current Current consumption, max.: 60 mA Power dissipated Power dissipation, typ.: 3.5 W

Read more less

SIEMENS SIMATIC S7-300 6ES73211BL000AA0 Digital input module SM 321, electrically isolated 32DE, 24V DC, 1 x 40-pole. Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 20.4 VAllowable range, upper limit (DC): 28.8 V Input current from backplane bus DC 5 V, max.: 15mA Power dissipated Power dissipation, typ.: 6.5 W

Read more less

SIEMENS SIMATIC DP 6ES71366DC000CA0 SIMATIC DP, electronics module ET 200SP, F-DQ 8X24VDC/0.5A PP, width 15mm, up to PL E (ISO 13849) up to SIL 3 (IEC 61508) With the SIMATIC ET 200SP, Siemens offers a distributed, multifunctional I/O system that can be easily put into service thanks to its space-saving design. It is approved for IP20 protection and designed for installation in a compact distribution box. The system ensures maximum flexibility, allowing modules to be replaced quickly and easily at any time thanks to Multi Hot Swapping. Furthermore, the SIMATIC ET 200SP offers you a wide range of communication channels, both diverse and fast. Thanks to the integration of the IM155-6MF MultiFieldbus interface module, you can always react flexibly and use the optimal protocol for your application, as this function supports different Ethernet protocols. Assembly and service are simplified by a uniform identification system, based on reference identification plates and color-coded pin assignment. Siemens ensures you future-proof systems with the integration of innovative and at the same time long-lasting automation products, in fact as industry experts you are already investing today in the technologies of tomorrow and thus redefining market standards. The continuous availability of data, the flexibility of the application cases and the versatile integration options ensure the excellent performance of the ET 200 products. The scalable and cost-optimised configuration of an ET 200SP station is ensured by the wide range of I/O modules. In addition to digital and analog input and output modules, fail-safe variants are also available for applications up to SIL 3 / PLe. This also applies to integrated motor starters, which are suitable for motors up to 5.5 kW. Energy meters for measuring and analyzing energy consumption, IO-Link master (V1.1.) as well as many other communication and technology modules allow you to adapt the system to every automation task. The accessories available for ET 200SP range from colored and non-coloured reference identification plates to marking labels for individual modules and ensure maximum visibility in the electrical panel. General Information Product type designation: F-DQ 8x24 VDC/0.5 A PP HFFirmware update possible: YesUsable BaseUnits: BU type A0Color code for coding plate a module specification colors: CC02 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesVoltage supply required according to NEC class 2: No Input Current Current consumption (nominal value): 75 mA; without loadCurrent consumption, max.: 21 mA; from the backplane bus Output voltage / header Rated value (DC): 24 V PowerPower draw from backplane bus: 70 mW Power dissipationPower dissipation, typ. 3 W

Read more less

SIEMENS SIMATIC DP (DC 24 V - 21 MA) 6ES71366BA000CA0 Electronics module for ET 200SP, F-DI 8x 24VDC HF, 15mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General information Product type designation F-DI 8x24VDC HFUsable BaseUnits BU type A0 Product function● I&M data Yes; I&M0 ... I&M3 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection YesVoltage supply required according to NEC class 2 No Input current Current consumption (nominal value) 75 mA; without loadCurrent consumption, max. 21 mA; from the backplane bus Power Power draw from backplane bus 70 mW Power dissipated Power dissipation, typ. 4 W  

Read more less

SIEMENS SIMATIC ET 200SP   (DC 24 V - 35 mA without load) 6ES71326BF010BA0 Digital output module, DQ 8x 24V DC/0.5A Standard, Source Output (PNP, P-switching) Packaging unit: 1 piece suitable for BU type A0, Color code CC02, substitute value output , Diagnostics module for: Short circuit to L+ and M, wire break, supply voltage. General information:Product type designation: DQ 8x24VDC/0.5A STHardware version: From FS02Firmware version: V0.0Possible FW update: NoUsable BaseUnits: BU type A0Color code for module-specific color coding label: CC02 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YES Input current Current consumption (nominal value): 35 mA; without load Power dissipated Power dissipation, typ.: 1 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES71316BF010BA0 Digital input module, DI 8x 24VDC Standard, Input type 3 (IEC 61131), Sink Input, (PNP, read on P), Packaging unit: 1 piece suitable for BU type A0, Color code CC01, Input delay 0.05..20ms; Diagnostics module for: short circuit in encoder supply, wire break, supply voltage. General information Product type designation: DI 8x24 VDC ST Hardware version: From FS02Firmware version: V0.0● Possible FW update: NoUsable BaseUnits: BU type A0Color code for specific color coding label of module: CC01   Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Transducer power supply Number of outputs 8Output voltage, min. 19.2 VShort circuit protection Yes; per module24 V transducer supply● 24 V Yes● Short-circuit protection Yes● Output current, max. 700 mA● Output current per channel, max. 700 mA● Output current per module, max. 700 mA Power dissipationPower dissipation, typ. 1W; 24 V, 8 inputs powered by the transducer power supply

Read more less

SIEMENS SIMATIC ET 200SP 6ES71316BH010BA0 Digital input module, DI 16x 24V DC Standard, Input type 3 (IEC 61131), Sink Input, (PNP, read on P). Packaging unit: 1 piece suitable for BU type A0, Color code CC00, Input delay 0.05..20ms; Diagnostics module for: wire break, supply voltage General Information: Product type designation: DI 16x24VDC STHardware version: From FS02Firmware version: V0.0Possible FW update: NoUsable BaseUnits: BU type A0Color code for module-specific color coding label: CC00 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Input Current Current consumption, max:. 90 mA

Read more less

SIEMENS SIMATIC S7-1200 6ES72231BL320XB0 Digital I/O SM 1223, 16DI/16DO, 16DI DC 24V, Sink/Source, 16DO, Transistor 0.5A . General informationProduct type designation: SM 1223, DI 16x24 VDC, DQ 16x24 VDC Supply voltage Rated value (DC): 24 V Allowable range, lower limit (DC): 19.2 V Allowable range, upper limit (DC): 28.8 V Input current from backplane bus DC 5 V, max..: 185 mADigital inputs from load voltage L+ (without load), max.: 4 but; per channel Power Active power absorbed, tip: 4.5 W

Read more less

SIMATIC ET 200SP 6ES71316BF000CA0 Digital input module, DI 8x DC 24V High Feature, Input type 3 (IEC 61131), Sink Input, (PNP, read on P), Packaging unit: 1 piece suitable for BU type A0, Color code CC01 , Input delay 0.05..20ms; Channel diagnostics for: short circuit in encoder supply, wire break, supply voltage, channel error LED . General informationProduct type designation: DI 8x24 VDC HFHardware version: From FS07Possible FW update: YesUsable BaseUnits: BU type A0Color code for module-specific color coding label:CC01 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Power dissipated Power dissipation, typ.: 1.5 W; 24 V, 8 inputs powered by transducer power supply

Read more less

BALLUFF BNI005H Network module for Profinet Interface: Profinet I/O Fast Start-Up (FSU): yes Operating voltage UB: 18...30.2 VDC Indicator: yes Connection ( COM 1): M12x1-Socket, 4-pin, D-coded Connection (COM 2): M12x1-Socket, 4-pin, D-coded Connection (voltage supply IN): 7/8" -Connector, 5-pin Connection (power supply OUT): 7/8"-Socket, 5-pin Slot connection: 8x M12x1-Socket, 5-pin, A-coded Digital inputs : 16x PNP, type 3 Digital outputs: 16x PNP Configurable inputs/outputs: yes Max. output current: 2 A short-circuit proof and overload-proof Summation current US, sensor: 9.0 A Summary current UA, actuator: 9.0 A Housing material: Zinc, die cast Dimensions: 68 x 37.9 x 224 mm Ambient temperature: -5...70 °C Protection rating: IP67 Additional interfaces: 8x IO-Link IO-Link version: 1.1 Port class: Type A Safety Hub Support: yes

Read more less

SIEMENS SIMATIC S7-1200 6ES72231BH320XB0 SIMATIC S7-1200, digital I/O SM 1223, 8 DI/8 DO, 8 DI DC 24V, Sink/Source, 8 DO, Transistor 0.5A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analogue input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs. General Information Product type designation: SM 1223, DI 8x24 VDC, DQ 8x24 VDC Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 20.4 VAllowable range, upper limit (DC): 28.8 V Input current from backplane bus DC 5 V, max. 145 mADigital inputs from load voltage L+ (without load), max. 4 mA; for channel Dissipated Power Power dissipation, typ. 2.5 W

Read more less

SIEMENS SIMATIC S7-300 6ES73221BL000AA0 Digital output module SM 322, electrically isolated, 32DA, DC 24V, 0.5A, 1 x 40-pole, total current 4A/group (16A/Baugruppe). Supply voltage Load voltage L+Rated value (DC): 24 VAllowable range, lower limit (DC): 20.4 VAllowable range, upper limit (DC): 28.8 V Input current from load voltage L+ (without load), max.: 160 mAfrom backplane bus DC 5 V, max.: 110 mA Power dissipated Power dissipation, typ.: 6.6 W Digital Outputs Number of outputs: 32Short circuit protection: Yes; electronicTripping threshold, typ.: 1 ALimitation of the inductive opening extra voltage on L+: (-53 V)Control of a digital input: Yes

Read more less

ALLEN- BRADLEY 1734OB8E Digital I/O module for Rockwell Automation PLC series/model POINT I O 8 POINT DIGITAL OUTPUT MODULE Direct current (DC) supply voltage: 10...28 VType of supply voltage: DCNumber of digital outputs: 8Configurable digital outputs: yesCurrent input voltage to signal 1: 1 mAPermitted input voltage: 10...0 VType of input voltage: DCOutput current: 3 AType of electrical connection: Connector Suitable for safety functions: yesATEX gas atmosphere category: NoneATEX dust atmosphere category: NoneWidth: 12 mmHeight: 56 mmDepth: 75.5 mm

Read more less

8 channel 24 Vdc earth electrode input module  1734IB8 General information: Direct current (DC) supply voltage: 10...10 V                                      Type of supply voltage: DCNumber of digital inputs: 8Configurable digital inputs: yesInput current a signal 1: 4 mAPermitted input voltage: 10...10 VType of input voltage: DCShort circuit protection, available on outputs: yesType of electrical connection: Connection screwDelay time at signal change: 0.5...0.5 msIntrinsically safe components Ex ia: noIntrinsically safe components Ex ib: noWidth: 12 mmHeight: 56 mmDepth: 75.5 mm

Read more less

ALLEN-BRADLEY Digital I/O module for Rockwell Automation PLC series/model POINT I O 4CHANNEL IO-LINK MASTER MODULE 17344IOL.

Read more less

POINT I/O 8 Point Digital Output Module Direct current (DC) supply voltage: 10...10 VType of supply voltage: DCNumber of digital outputs: 8Configurable digital outputs: yesCurrent input voltage to signal 1: 1 mAPermitted input voltage: 10...10 VType of input voltage: DCOutput current: 3 AType of electrical connection: Connection screwSuitable for safety functions: yesWidth: 12 mmHeight: 76 mmDepth: 56 mm

Read more less

ALLEN-BRADLEY DC Output Module, 8 Points, Safety, IP20, POINT, 24VDC, Sourcing 1734OB8S Direct current (DC) supply voltage: 19.2...28.8 VType of supply voltage: DCNumber of digital outputs: 8Configurable digital outputs: yesVoltage permitted input voltage: 19.2...28.8 VType of input voltage: DCOutput current: 1 AShort circuit protection, available on outputs: yesType of electrical connection: Connection screwSuitable for safety functions: yesWidth: 24 mmHeight: 77 mmDepth: 55 mm

Read more less

ALLEN-BRADLEY Digital I/O module for Rockwell Automation PLC series/model 8 CHANNEL SFTY SINKING INP MOD PN-25132 - 1734IB8S Direct current (DC) supply voltage: 10...10 V Type of supply voltage: DC Number of digital inputs: 8 Configurable digital inputs: yes Input current at signal 1: 4 mA Allowed input voltage: 10...10 V Type of input voltage: DC Short circuit protection, available on outputs: yes Type of electrical connection: Screw connection Delay time at signal change: 0.5...0.5 ms Suitable for safety functions: yes Width: 12 mm Height: 56 mm Depth: 75.5 mm

Read more less