ABB
ABB 2CDS252001R0324 | Abb S202-C32
Abb Miniature circuit breaker - 2P - C - 32 A 2CDS252001R0324 System pro M compact S200 circuit breakers protect installations from overloads and short circuits, ensuring reliability and safety in operations. Technical dataReference standards:IEC/EN 60898-1IEC/EN 60947-2UL 107 Tripping characteristic: C Rated operating voltage:according to IEC 60898-1 400 V ACaccording to IEC 60898-1 400 Vaccording to IEC 60947-2 440 V ACOperating voltage:Maximum (Incl . Tolerance) 125 V DCMaximum (Incl. Tolerance) 440 V ACMinimum 12 V ACMinimum 12 V DC Rated insulation voltage (Ui): according to IEC/EN 60664-1 440 V Impulse withstand voltage (Uimp): 4 kVat 2000 m 5 kVat Sea Level 6.2 kV Dielectric test voltage:50/60 Hz, 1 min: 2 kVInput voltage type:AC/DCRated current (In):32 A Rated short-circuit capacity: (AC) 6 kA(DC) 6 kA(400 V AC) 6 kA(400 V) 6 kA Rated extreme short-circuit capacity (Icu): (125 V DC) 10 kA(230 V AC) 20 kA(400 V AC) 10 kA(440 V AC) 10 kA(48 V DC ) 20 kA(230 V) 20 kA(400 V) 10 kA Rated conditional short-circuit current (Inc): (230 V) 20 kA(400 V) 20 kARated service short-circuit capacity (Ics):(230 V AC) 15 kA(400 V AC) 7.5 kA(440 V AC) 7.5 kAFrequency (f):50 HzRated frequency (f):50 / 60 Hz50 ... 60 Hz Power loss: 7.4 Wa Nominal Operating Conditions for Polo 3.7 WSupply voltage connection:ArbitraryContact position indication:Red ON / Green OFF Energy limitation class: 3 Electrical resistance:10000 AC cycle (i)Mechanical resistance:20000 cycle (i)Number of protected poles:2Number of poles:2Overvoltage category: IIITightening torque:2.8 N mMounting type:DIN-RailScrew terminal type:Failsafe Bi-directional Cylinder-lift TerminalActuator labeling:I / OActuator material:Insulation Group II, Black, SealableCasing material:Insulation class II, RAL 7035DIN rail mounting:TH35-15 (35 x 15 mm Mounting Bar) according to IEC 60715 TH35-7.5 (35 x 7.5 mm Mounting Bar) according to IEC 60715
ABB
ABB 1SBL177001R1310 Abb AF16-30-10-13 - bob. 100...250 V AC/DC, aux 1NO Contactors up to 100A - AF09…AF2650 three-pole contactors with AC coil and DC-7.5 kW (AC-3 400 V) Technical data Number of main NA contacts: 3 Number of main NC contacts: 0 Number of NO auxiliary contacts: 1 Number of NC auxiliary contacts: 0 Reference standards: IEC/EN 60947-1, IEC/EN 60947-4-1, UL 60947-4-1, CSA C22.2 No. 60947-4-1 Rated operating voltage: 690 V Auxiliary Circuit Main Circuit 690 V Rated frequency (f): Auxiliary Circuit 50 / 60 Hz Control Circuit 50 / 60 Hz Main Circuit 50 / 60 Hz Conventional free air thermal current (Ith): according to IEC 60947-4-1, Open Contactors q = 40 °C 35 A according to IEC 60947-5-1, q = 40 °C 16 A Rated operating current AC-1 (Ie): (690V) 40°C 30A (690V) 60°C 30A (690V) 70°C 26A Rated operating current AC-3 (Ie):(415V) 60°C 18A (440V) 60°C 18A (500V) 60°C 15A (690V) 60°C 10.5A (380 / 400 V) 60 °C 18 A (220 / 230 / 240 V) 60 °C 18 A Rated operating current AC-3e (Ie): (415V) 60°C 18A (440V) 60°C 18A (500V) 60°C 15A (690V) 60°C 10.5A (380 / 400 V) 60 °C 18 A (220 / 230 / 240 V) 60 °C 18 A Rated operating current AC-3 (Pe):(400V) 7.5kW (415V) 9kW (440V) 9kW (500V) 9kW (690V) 9kW (380 / 400 V) 7.5 kW (220 / 230 / 240 V) 4 kW Rated operating current AC-3e (Pe): (415V) 9kW (440V) 9kW (500V) 9kW (690V) 9kW (380 / 400 V) 7.5 kW (220 / 230 / 240 V) 4 kW Rated operating current AC-15 (Ie): (500V) 2A (690V) 2A (24/127V) 6A (220 / 240V) 4A (400 / 440V) 3A Rated short-time withstand current (Icw): at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 150 A at 40 °C Ambient Temp, in Free Air, from a Cold State 15 min 35 A at 40 °C Ambient Temp, in Free Air, from a Cold State 1 min 60 A at 40 °C Ambient Temp, in Free Air, from a Cold State 1 s 300 A at 40 °C Ambient Temp, in Free Air, from a Cold State 30 s 80 A for 0.1 s 140 A for 1 s 100 AMaximum breaking capacity: cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 250 A cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 106 A Maximum electrical switching frequency: AC-1 600 cycles per hour AC-15 1200 cycles per hour AC-2 / AC-4 300 cycles per hour AC-3 1200 cycles per hour DC-13 900 cycles per hour Rated operating current DC-1 (Ie):(110V) 1-Pole, 40°C 20A (110V) 1-Pole, 60°C 20A (110V) 1-Pole, 70°C 20A (110V) 2 Poles in Series, 40°C 30A (110V) 2 Poles in Series, 60°C 30A (110V) 2 Poles in Series, 70°C 26A (110V) 3 Poles in Series, 40°C 30A (110V) 3 Poles in Series, 60°C 30A (110V) 3 Poles in Series, 70°C 26A (220V) 2 Poles in Series, 40°C 20A Show more Rated operating current DC-3 (Ie): (110V) 1-Pole, 40°C 8A (110V) 1-Pole, 60°C 8A (110V) 1-Pole, 70°C 8A (110V) 2 Poles in Series, 40°C 30A (110V) 2 Poles in Series, 60°C 30A (110V) 2 Poles in Series, 70°C 26A (110V) 3 Poles in Series, 40°C 30A (110V) 3 Poles in Series, 60°C 30A (110V) 3 Poles in Series, 70°C 26A (220V) 2 Poles in Series, 40°C 8A Show more Rated operating current DC-5 (Ie):(110V) 1-Pole, 40°C 4A (110V) 1-Pole, 60°C 4A (110V) 1-Pole, 70°C 4A (110V) 2 Poles in Series, 40°C 20A (110V) 2 Poles in Series, 60°C 20A (110V) 2 Poles in Series, 70°C 20A (110V) 3 Poles in Series, 40°C 30A (110V) 3 Poles in Series, 60°C 30A (110V) 3 Poles in Series, 70°C 26A (220V) 2 Poles in Series, 40°C 4A Show more Rated operating current DC-13 (Ie): (24V) 6A / 144W (48V) 2.8A / 134W (72V) 1A / 72W (110V) 0.55A / 60W (125V) 0.55A / 69W (220V) 0.27A / 60W (250V) 0.27A / 68W (400V) 0.15A / 60W (500V) 0.13A / 65W (600V) 0.1A / 60W Rated insulation voltage (Ui):acc. to IEC 60947-4-1 690 V acc. to IEC 60947-5-1 690 V according to UL/CSA 600 V Impulse withstand voltage (Uimp): 6kV Maximum mechanical switching frequency: 3600 cycles per hour Rated control circuit voltage (Uc): 50 Hz 100 ... 250 V 60 Hz 100 ... 250 V Operation in DCin CD 100 ... 250 V Maneuvering time: Between Coil De-energization and NC Contact Closing 13 ... 98 ms Between Coil De-energization and NO Contact Opening 11 ... 95 ms Between Coil Energization and NC Contact Opening 38 ... 90 ms Between Coil Energization and NO Contact Closing 40 ... 95 msDIN rail mounting: TH35-15 (35 x 15 mm Mounting Bar) according to IEC 60715 TH35-7.5 (35 x 7.5 mm Mounting Bar) according to IEC 60715 Mounting with screws (not supplied): 2 x M4 screws placed diagonally Cable sections - main circuit: Flexible with Ferrule 1/2x 0.75 ... 6 mm² Flexible with Insulated Ferrule 1x 0.75 ... 4 mm² Flexible with Insulated Ferrule 2x 0.75 ... 2.5 mm² Rigid Solid 1/2x 1 ... 4 mm² Rigid Stranded 1/2x 1 ... 6 mm² Sections of the cables - auxiliary circuit: Flexible with Ferrule 1/2x 0.75 ... 2.5 mm² Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm² Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm² Rigid Solid 1/2x 1 ... 2.5 mm² Rigid Stranded 1/2x 1 ... 2.5 mm² Cable sections - control circuit: Flexible with Ferrule 1/2x 0.75 ... 2.5 mm² Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm² Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm² Rigid Solid 1/2x 1 ... 2.5 mm² Rigid Stranded 1/2x 1 ... 2.5 mm²Cable stripping length: Auxiliary Circuit 10 mm Control Circuit 10 mm Main Circuit 10 mm Degree of protection: according to IEC 60529, IEC 60947-1, EN 60529 IP20 Main Terminals according to IEC 60529, IEC 60947-1, EN 60529 IP20 coils according to IEC 60529, IEC 60947-1, EN 60529 IP20 Auxiliary TerminalsClamp Type: Screw Terminals UL/CSA technical department Maximum operating voltage UL/CSA: Main Circuit 600 V UL/CSA rated operational power: (600 V AC) 30 A UL/CSA Scope: (120 V AC) Single phase 1-1/2 hp (200 ... 208 V AC) Three Phase 5 hp (220 ... 240 V AC) Three Phase 5 hp (240 V AC) Single phase 3 hp (440 ... 480 V AC) Three Phase 10 hp (550 ... 600 V AC) Three Phase 15 hp UL/CSA main circuit cable cross sections:Rigid Solid 1/2x 16-10 AWG Rigid Stranded 1/2x 16-10 AWG UL/CSA auxiliary circuit cable sections: Rigid Solid 1/2x 18-14 AWG Rigid Stranded 1/2x 18-14 AWG UL/CSA control circuit cable sections: Rigid Solid 1/2x 18-14 AWG Rigid Stranded 1/2x 18-14 AWG UL/CSA tightening torque: Auxiliary Circuit 11 in·lb Control Circuit 11 in·lb Main Circuit 13 in·lbEnvironmental data Room temperature: Close to Contactor Fitted with Thermal O/L Relay -25 ... 60 °C Close to Contactor without Thermal O/L Relay -40 ... 70 °C Close to Contactor for Storage -60 ... +80 °C Climate resistance: Category B according to IEC 60947-1 Annex Q Maximum permitted operating altitude: Without Derating 3000 m Impact resistance according to IEC 60068-2-27: Closed, Shock Direction: B1 25 g Open, Shock Direction: B1 5 g Shock Direction: At 30 g Shock Direction: B2 15g Shock Direction: C1 25g Shock Direction: C2 25g Vibration resistance according to IEC 60068-2-6: 4g Closed Position & 2g Open position 5 ... 300 Hz
ABB OT40F3 | Abb
Abb OT40F3 OT disconnect switch for mounting on DIN bar or bottom plate, three-pole, with front rotary control Technical data Version as main switchyesVersion switch for maintenance / repairyesVersion as safety switchnoVersion emergency stop switchnoInverter versionnoNumber of switches20000Maximum rated operating voltage Ue in AC750 VRated operating voltage750...750 V Rated uninterrupted current Iu40 ARated permanent current at AC-23, 400V23 ARated permanent current at AC-21, 400 V40 A Rated operating power in AC-3, 400 V11 kWRated short-time withstand current Icw0.5 kARated operating power in AC-23, 400 V11 kW Switching power at 400 V11 kWRated conditional short-circuit current Iq6.5 kANumber of poles3Number of auxiliary NC contacts0 Number of auxiliary contacts NO0Number of auxiliary changeover contacts0Optional motorizationnoIntegrated motorizationnoOptional voltage release noType of deviceFixed executionSuitable for floor fixingyesSuitable for front mounting with 4 screwsnoSuitable for front mounting on pin centralnoSuitable for DIN rail mountingyesSuitable for intermediate mountingyesColor of control elementBlackType of control element controlShort lever knobInterlockablenoType of connection to the main current circuitScrew connectionIP protection degree frontIP20Type of protection (NEMA)1
ABB OT63F3 | Abb
Abb 63A OT63F3 OT disconnect switch for mounting on DIN bar or bottom plate, three-pole, with front rotary control Technical data Version as main switchyesVersion switch for maintenance / repairyesVersion as safety switchnoVersion emergency stop switchnoInverter versionnoNumber of switches1Maximum rated operating voltage Ue in AC750 VRated operating voltage750...750 V Rated uninterrupted current Iu63 ARated permanent current at AC-23, 400V63 ARated permanent current at AC-21, 400 V63 A Rated operating power in AC-3, 400 V22 kWRated short-time withstandable current Icw1 kARated operating power in AC-23, 400 V22 kW Switching power at 400 V22 kWRated conditional short-circuit current Iq13 kANumber of poles3Number of auxiliary NC contacts0 Number of auxiliary contacts NO0Number of auxiliary changeover contacts0Optional motorizationnoIntegrated motorizationnoOptional voltage release noType of deviceFixed executionSuitable for floor fixingyesSuitable for front mounting with 4 screwsnoSuitable for front mounting on pin centralnoSuitable for DIN rail mountingyesSuitable for intermediate mountingnoColor of control elementBlackInterlockable noType of connection to the main current circuitScrew connectionIP protection degree frontIP20Type of protection (NEMA)1
ABB P9MPLGGD | Abb
Abb P9MPLVGDFlush luminous unstable push buttons with plastic lens, each order code includes metal body and satin chrome nut along with mounting bracket
ABB P9MSMZ3N | Abb
Abb P9MSMZ3N 3 pos black auto-return selector
ABB P9MSVZ3N | Abb
Abb P9MSVZ3N 3 POS. BLACK SPRING RETAINER SELECTOR
ABB
EA2000 | AbbAbb EA2000 Bottom plate union kit H 2000mm for wardrobes.
ABB P9MLGD | Abb
Abb P9MLGD Satin diff-yellow indicator light
ABB
P9MMN2F | AbbAbb P9MMN2F Joystick 2 pos. stable.
ABB M236823 | Abb
Abb M236823 Transformer intended for powering control circuits, for example for control, signaling, interlocking etc. TM-C control transformers • Ideal for powering control and auxiliary circuits in both distribution and automation panels • Wide range of powers from 50 to 2500VA • Full power on all secondary sockets • Double secondary (12-24V or 115-230V) on the entire range.
ABB BA9S24LEDV | Abb
Abb BA9S24LEDV ABB signaling and indication lamp type/model BA9S24LEDV GREEN LED 24V BA9S
ABB P9MSMI5N | Abb
Abb P9MSMI5N 2 pos. rotary selector spring des-cent black
ABB HKF101 | Abb
Abb HKF101 HKF1-01 aux front contact. 1nc for MS for modular switches.
ABB OFAA3AM500 | Abb
Abb OFAA3AM500 OFAA3AM500 FUS NH3 AM 500A 690V
ABB EA8081 | Abb
Abb EA8081 Side/Back Panel for ABB Cabinets Type/Model BOTTOM PLATE 800X800MM (HXL)
ABB EV1001 | Abb
Abb EV1001 LED lamp 3 6W 24V AC DC L 342 MM
ABB M657693 | Abb
Abb M657693 E234 CT-TGD.22 Timer relay.
ABB 2TLA019995R0800 | Abb
Abb 2TLA019995R0800 JSHD4-2-AH TYPE ABB
ABB P9PDTV0 | Abb
Abb P9PDTV0 Light source test bulb for control and signaling devices.
ABB SRN10625K | Abb
Abb SRN10625K SR2 series box with blind door and bottom plate, 12/10 thick steel sheet structure, 20/10 thick galvanized sheet bottom plate. Used for the creation of command and control panels for the most varied industrial machines: from large machinery to automated production lines or parts of them, to the typical installations of on-board machine panels, to boilers, heating systems and more. It also allows the creation of secondary distribution panels thanks to the possibility of installing the entire range of modular devices and switches on DIN rails combined with special pre-drilled and hinged modular front panels.
ABB P9MSVX0N | Abb
Abb P9MSVX0N 4 POS. STAB LONG LEVER SELECTOR
ABB BVND-P09MGT-11 | Abb
Abb BVND-P09MGT-11 Straight fittings with polyamide PG thread, for cable protection systems in a wide range of applications. IP66 version
ABB ER 730 2 | Abb
Abb ER 730 2 CR-U2SM OCTAL SOCKET 2C OR SLIM FOR RELAYS
