Abb EN0102K Heating Thermostat NC 110/250V 50/60HZ IP20

Read more less

  Abb  Miniature circuit breaker - 2P - C - 32 A 2CDS252001R0324 System pro M compact S200 circuit breakers protect installations from overloads and short circuits, ensuring reliability and safety in operations. Technical dataReference standards:IEC/EN 60898-1IEC/EN 60947-2UL 107 Tripping characteristic: C Rated operating voltage:according to IEC 60898-1 400 V ACaccording to IEC 60898-1 400 Vaccording to IEC 60947-2 440 V ACOperating voltage:Maximum (Incl . Tolerance) 125 V DCMaximum (Incl. Tolerance) 440 V ACMinimum 12 V ACMinimum 12 V DC Rated insulation voltage (Ui): according to IEC/EN 60664-1 440 V Impulse withstand voltage (Uimp): 4 kVat 2000 m 5 kVat Sea Level 6.2 kV Dielectric test voltage:50/60 Hz, 1 min: 2 kVInput voltage type:AC/DCRated current (In):32 A Rated short-circuit capacity: (AC) 6 kA(DC) 6 kA(400 V AC) 6 kA(400 V) 6 kA Rated extreme short-circuit capacity (Icu): (125 V DC) 10 kA(230 V AC) 20 kA(400 V AC) 10 kA(440 V AC) 10 kA(48 V DC ) 20 kA(230 V) 20 kA(400 V) 10 kA Rated conditional short-circuit current (Inc): (230 V) 20 kA(400 V) 20 kARated service short-circuit capacity (Ics):(230 V AC) 15 kA(400 V AC) 7.5 kA(440 V AC) 7.5 kAFrequency (f):50 HzRated frequency (f):50 / 60 Hz50 ... 60 Hz Power loss: 7.4 Wa Nominal Operating Conditions for Polo 3.7 WSupply voltage connection:ArbitraryContact position indication:Red ON / Green OFF Energy limitation class: 3   Electrical resistance:10000 AC cycle (i)Mechanical resistance:20000 cycle (i)Number of protected poles:2Number of poles:2Overvoltage category: IIITightening torque:2.8 N mMounting type:DIN-RailScrew terminal type:Failsafe Bi-directional Cylinder-lift TerminalActuator labeling:I / OActuator material:Insulation Group II, Black, SealableCasing material:Insulation class II, RAL 7035DIN rail mounting:TH35-15 (35 x 15 mm Mounting Bar) according to IEC 60715 TH35-7.5 (35 x 7.5 mm Mounting Bar) according to IEC 60715

Read more less

Abb 1SDA054945R1 FRONT FOR LEVER CONTROL FOR EXTRACTABLE SWITCH T4-T5 Technical data Configuration type: Loose or Configurable Reference standards: IEC

Read more less

Abb 1SFL467001R1111 The AF116 ... AF140 contactors are mainly used for controlling three-phase motors and circuits with power up to 690 V AC, AF146 up to 1000 V AC. These contactors have a block design with 3 main poles/ – control circuit: AC or DC operation with electronic coil interface that accepts a wide range of control voltages. Technical data Number of contacts 3 main NA Number of contacts 0 main NC Number of contacts 1 NA auxiliaries Number of contacts 1 NC auxiliaries Rated Main Circuit Voltage 1000 V operation Rated frequency (f) Main Circuit 50 / 60 Hz

Read more less

Abb 1SDA073881R1 HORIZONTAL MECHANICAL INTERLOCK BETWEEN 2 SWITCHES - TYPE A - STANDARD CABLES E1.2..E6.2-XT7-XT7M Technical data Auxiliary contacts, extendable No Number of NC contacts 0 Number of contacts NO 0

Read more less

Abb 2CSF204568R1250 MODULAR DIFFERENTIAL SWITCH MODEL F204 B DIFF.PURO 4P B 25 30 Technical data Number of poles 4 Rated voltage 400  V Rated current 25  TO Rated fault current 0.03  TO Rated insulation voltage Ui 440  V Rated impulse voltage resistance Uimp 4  kV Mounting method Mounting on g from DIN Differential type B Selective No Digital electronic control intervention time No Rated short-time current Icw 1  kA Resistance to nuisance trips (peak voltage surges) 3  kA Voltage type B.C With locking device No Frequency 50/60 Hz Accessorizable Yes Degree of protection (IP) IP20 Width in number of modules 4 Recess depth 69.5  mm Ambient temperature during operation -25...70  °C Degree of pollution 3 Connectable multi-strand (semi-rigid) conductor section 0...25  mm² Connectable single-wire (rigid) conductor section 1...25  mm² Explosion-proof No

Read more less

Abb 1SBL237001R1100 - AF26-30-00-11 The AF26-30-00-11 is a 3-pole contactor - 690 V IEC or 600 UL with screw terminals, controlling motors up to 11 kW / 400 V AC (AC-3) or 15 hp / 480 V UL and switching power circuits up to 45 A (AC-1) or 45 A UL for general use. Thanks to AF technology, the contactor has a wide control voltage range (24-60 V 50/60 Hz and 20-60 V DC), handling large control voltage variations, reducing panel power consumption and ensuring distinct operations in unstable networks. In addition, surge protection is integrated, providing a compact solution. AF contactors have a block-type design, can be easily extended with additional auxiliary contact blocks and a wide range of additional accessories. Technical: Main Contact Number NO: 3 Main Contact Number NC: 0 Number of Auxiliary Contacts NO: 0 Number of Auxiliary Contacts NC: 0 Standards: IEC/EN 60947-1, IEC/EN 60947-4-1, UL 60947-4-1, CSA C22.2 No. 60947-4-1 Rated Operational Voltage: Main Circuit 690V Rated Frequency (f): Control Circuit 50 / 60 Hz Main Circuit 50 / 60 Hz Conventional Free-air Thermal Current (Ith): acc. to IEC 60947-4-1, Open Contactors Θ = 40 °C 50 A Rated Operational Current AC-1 (Ie): (690V) 40°C 45A (690V) 60°C 40A (690V) 70°C 32A Rated Operational Current AC-3 (Ie): (415V) 60°C 26A (440V) 60°C 26A (500V) 60°C 23A (690V) 60°C 17A (380 / 400 V) 60 °C 26 A (220 / 230 / 240 V) 60 °C 26 A Rated Operational Current AC-3e (Ie): (415V) 60°C 26A (440V) 60°C 26A (500V) 60°C 23A (690V) 60°C 17A (380 / 400 V) 60 °C 26 A (220 / 230 / 240 V) 60 °C 26 A Rated Operational Power AC-3 (Pe): (400V) 11kW (415V) 11kW (440V) 15kW (500V) 15kW (690V) 15kW (380 / 400 V) 11 kW (220 / 230 / 240V) 6.5kW Rated Operational Power AC-3e (Pe): (415V) 11kW (440V) 15kW (500V) 15kW (690V) 15kW (380 / 400 V) 11 kW (220 / 230 / 240V) 6.5kW Rated Short-time Withstand Current Low Voltage (Icw): at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 350 A at 40 °C Ambient Temp, in Free Air, from a Cold State 15 min 50 A at 40 °C Ambient Temp, in Free Air, from a Cold State 1 min 150 A at 40 °C Ambient Temp, in Free Air, from a Cold State 1 s 700 A at 40 °C Ambient Temp, in Free Air, from a Cold State 30 s 225 A Maximum Breaking Capacity: cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 500 A cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 200 A Maximum Electrical Switching Frequency: (AC-1) 600 cycles per hour (AC-2 / AC-4) 150 cycles per hour (AC-3) 1200 cycles per hour Rated Operational Current DC-1 (Ie): (110V) 2 Poles in Series, 40°C 45A (110V) 2 Poles in Series, 60°C 40A (110V) 2 Poles in Series, 70°C 32A (110V) 3 Poles in Series, 40°C 45A (110V) 3 Poles in Series, 60°C 40A (110V) 3 Poles in Series, 70°C 32A (220V) 3 Poles in Series, 40°C 45A (220V) 3 Poles in Series, 60°C 40A (220V) 3 Poles in Series, 70°C 32A (72V) 1-Pole, 40°C 45A Show more Rated Operational Current DC-3 (Ie): (110V) 2 Poles in Series, 40°C 45A (110V) 2 Poles in Series, 60°C 40A (110V) 2 Poles in Series, 70°C 32A (110V) 3 Poles in Series, 40°C 45A (110V) 3 Poles in Series, 60°C 40A (110V) 3 Poles in Series, 70°C 32A (220V) 3 Poles in Series, 40°C 45A (220V) 3 Poles in Series, 60°C 40A (220V) 3 Poles in Series, 70°C 32A (72V) 1-Pole, 40°C 45A Show more Rated Operational Current DC-5 (Ie): (110V) 2 Poles in Series, 40°C 45A (110V) 2 Poles in Series, 60°C 40A (110V) 2 Poles in Series, 70°C 32A (110V) 3 Poles in Series, 40°C 45A (110V) 3 Poles in Series, 60°C 40A (110V) 3 Poles in Series, 70°C 32A (220V) 3 Poles in Series, 40°C 20A (220V) 3 Poles in Series, 60°C 20A (220V) 3 Poles in Series, 70°C 20A (72V) 1-Pole, 40°C 20A Show more Rated Insulation Voltage (Ui): acc. to IEC 60947-4-1 690 V acc. to UL/CSA 600V Rated Impulse Withstand Voltage (Uimp): 6kV Maximum Mechanical Switching Frequency: 3600 cycles per hour Rated Control Circuit Voltage (Uc): 50Hz 24...60V 60Hz 24...60V DC Operation 20 ... 60 V

Read more less

Abb 1SFA611610R2010 The MCB-01B contact block is: - Non-illuminated - Single contact block - Rear mounted - silver (Ag) - 0 NO - 1NC - 690 VThis contact block is part of the modular plastic range of ABB, the most versatile range with a high level of flexibility and market-leading electrical features. Designed for total reliability, longer life and maximum mechanical life. Self-cleaning contacts ensure reliable operation without the need for maintenance, increasing uptime. A high degree of protection ensures reliability in extreme environments. The innovative design simplifies the entire process, from selection to quick and easy installation, without tools. The perfect solution for every application

Read more less

Abb 1SBN082306T1000 - BEA26-4 BEA26-4 is an insulated link used to connect AF26 ... AF38, AFC26 ... AFC38 or AFS26 ... AFS38 contactors with MS116-0,16 ... MS116-16 or MS132-0,16 ... MS132-10 manual motor starters. The BEA26-4 ensures the electrical and mechanical connection between a contactor or reversing contactors and the associated manual motor starter. Main features Type of accessory / spare part  -  Connection bridge

Read more less

Abb 1SAJ530000R1100  The UMC100.3 DC intelligent motor controller uses a 110...240 V AC/DC power supply and is suitable for overload protection. It can be connected to a variety of communication networks and has a wide range of additional parameters to maximize motor protection.  

Read more less

 1SFA898117R7000 | Abb The PSTX570-600-70 softstarter has a maximum rated operating current of 570 A with an operating voltage range of 208...600 V AC. The rated control voltage is 100...250 V AC at 50/60 Hz. The PSTX features a 3-phase soft start and stop control via a voltage or torque ramp. It has a built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from the relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. The PSTX also features jog, braking, brake to standstill, diagnostics, sequence start and emergency/fire pump mode as standard. Main features Rated operating current Ie at 40° Tu  -  570  TO Rated operating voltage Ue  -  208...600  V Mechanical power supplied for three-phase motor, standard switching, 230 V  -  160  kW Mechanical power supplied for three-phase motor, standard commutation, 400 V  -  315  kW Mechanical power supplied for three-phase motor, delta switching, 230 V  -  295  kW

Read more less

Abb 2CDS200936R0001 Auxiliary contact. Allows the indication of the position of the device contacts. Suitable for MCB S 200 series, SN 201 series (via the SN201-IH interface module), F 200 RCCB series, RCBO DS201 series, DS202C, DS 200 series. Technical data Function: Auxiliary contact Suitable for: S200 S200M S200P S200S S200 MT S200 MUC S300P Suitable for product class: Miniature Circuit Breaker Power loss: 1 W Maximum 1W Number of NC auxiliary contacts: 1 Number of auxiliary contacts NO: 1 Number of auxiliary contacts c/o (SPDT): 0 Accessory Type: Auxiliary contact Mounting position: left 

Read more less

Abb 1SFL431024R8000 CONTACTOR FOR CAPACITOR UA95-30-00 RA 230V 50-60HZ Technical data Number of main contacts NA: 3 Number of main NC contacts: 0 Number of auxiliary contacts NO: 0 Number of NC auxiliary contacts: 0 Rated operating voltage: Main Circuit 1000V Nominal frequency (f): Main Circuit 50 Hz Conventional free air thermal current (Ith): according to IEC 60947-4-1, Open Contactors q = 40 °C 145 A Rated operating current AC-1 (Ie): (690V) 40°C 145A (690V) 55°C 135A (690V) 60°C 135A (690V) 70°C 115A Rated operating current AC-3 (Ie): (415V) 55°C 96A (440V) 55°C 93A (500V) 55°C 80A (690V) 55°C 65A (1000V) 55°C 30A (380 / 400 V) 55 °C 96 A (220 / 230 / 240 V) 55 °C 96 A Rated operating current AC-3 (Pe): (380 / 400 V) 45 kW Rated operating current AC-6b (Pe): (230 / 240 V) 40 °C, 50 / 60 Hz 40 kvar (230 / 240 V) 55 °C, 50 / 60 Hz 35 kvar (230 / 240 V) 70 °C, 50 / 60 Hz 30 kvar (400 / 415 V) 40 °C, 50 / 60 Hz 70 kvar (400 / 415 V) 70 °C, 50 / 60 Hz 53 kvar (400 / 415 V) 55 °C, 50 / 60 Hz 60 kvar (440 V) 40 °C, 50 / 60 Hz 75 kvar (440 V) 55 °C, 50 / 60 Hz 65 kvar (440 V) 70 °C, 50 / 60 Hz 58 kvar (500 / 550 V), 40 °C, 50 / 60 Hz 85 kvar Show more Rated breaking capacity AC-3 according to IEC 60947-4-1: 8 x Ie AC-3 Rated making capacity AC-3 according to IEC 60947-4-1: 10 x Ie AC-3 Maximum interrupting power: cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 1160 A cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 800 A

Read more less

Abb 1SDA068282R1 TMAX XT3S 250 FIXED THREE-POLE SWITCH WITH FRONT TERMINALS AND MAGNETIC RELEASES MA Iu 200 A I3=1200...2400 A Technical data Cable sections - main circuit: Busbar 85..192 mm² Current type: AC/DC Electrical life: 120 cycles per hour 8000 cycle(s) Mechanical durability: 240 cycles per hour 25000 cycle(s) Number of poles: 3 Opening duration: CB with SOR 15 ms CB with UVR 15ms Multiple Order: 1 piece(s) Power loss: at Nominal Operating Conditions for Pole 13.2 W Rated current (In): 200 A Nominal frequency (f): 50 / 60 Hz Impulse withstand voltage (Uimp): 8kV Instantaneous short-circuit rated current setting (Ii): 1200…2400 A Rated insulation voltage (Ui): 800 V Rated operating voltage: 690VAC 500V DC

Read more less

Abb 2CMA103572R1000 C11 is the simple and compact energy meter for insertion in 230 V AC networks up to 40 A. It is CE approved, equipped with outputs with pulse and alarm function, optional MID approval, 1 DIN module Technical data Function: Electricity meter Subfunction: Steel Nominal voltage (Ur): 230 V Voltage range: 184…264 V Rated current (In): 5 A Maximum 40 A Rated current: 5 A Nominal frequency (f): 50 / 60 Hz Power consumption (@Pcons): 0.22W Power loss: 0.22W Communication interface: It is not Precision: Active Energy Cl. ±1% (or B for MID meters) Measuring Instrument Conformity: IEC 62053-22 Meter Tariff Rating: One Tariff Pulse Output Rate: 1000 Number of poles: 1 Number of phases: Single phase

Read more less

Abb 1SDA067404R1 TMAX XT1C 160 FIXED FOUR-POLE SWITCH WITH FRONT TERMINALS AND THERMO-MAGNETIC RELEASES TMD R 63-630 A Technical data Cable sections - main circuit: Busbar 45.5 ... 80 mm² Current type: AC/DC Electrical life: 120 cycles per hour 8000 cycle(s) Mechanical durability: 240 cycles per hour 25000 cycle(s) Number of poles: 4 Opening duration: CB with SOR 15 ms CB with UVR 15ms Multiple Order: 1 piece(s) Power loss: at Nominal Operating Conditions for Pole 4.3 W Rated current (In): 63 A Nominal frequency (f): 50 / 60 Hz Impulse withstand voltage (Uimp): 8kV Instantaneous short-circuit rated current setting (Ii): 630 A Rated insulation voltage (Ui): 800 V

Read more less

Abb 1SCA120518R1001 OT160EV04 section 4P 160A power switch, with pistol handle, mounting on bottom plate Technical data Rated operating current AC-21A (Ie): (380 ... 415 V) 200 A (500V) 200A (690V) 200A Rated operating current AC-22A (Ie): (380 ... 415 V) 200 A (500V) 200A (690V) 160A Rated operating current AC-23A (Ie): (380 ... 415 V) 160 A (500V) 160A (690V) 160A Rated operating current AC-23a (Pe): (220 ... 240 V) 48 kW (400 ... 415 V) 88 kW (500V) 112kW (690V) 144kW Conventional free air thermal current (Ith): q = 40 °C 200 A Conventional thermal current (Ithe): Fully Enclosed 160A Impulse withstand voltage (Uimp): 12kV Rated insulation voltage (Ui): according to IEC/EN 60664-1 1000 V Rated operating voltage: Main Circuit 1000V Rated short circuit making capacity (Icm): (690V) 30kA Rated short-time withstand current (Icw): for 1 s 8 kA Power loss: at Nominal Operating Conditions for Pole 3.2 W Degree of pollution: 3

Read more less

Abb 2TLA020051R5200 ADAM DYN-STATUS M12-5 CONTACT Technical data Communication interface: DYNlink Connection setup: M12-5 bad Number of exits: Non-Failsafe, Undelayed Contacts 0 Non-Failsafe, Undelayed Semiconductors 1 Operating distance (Sn): 15mm Coated PCB: No Probability of dangerous failure per hour (PFDH): 4.5 10-9 now Control supply nominal voltage (Us): 24V DC

Read more less

Abb 1SDA068059R1 TMAX XT3N 250 FIXED THREE-POLE SWITCH WITH FRONT TERMINALS AND THERMO-MAGNETIC RELEASES TMD R 250-2500 A Technical data Cable sections - main circuit: Busbar 85..192 mm² Current type: AC/DC Electrical life: 120 cycles per hour 8000 cycle(s) Mechanical durability: 240 cycles per hour 25000 cycle(s) Number of poles: 3 Opening duration: CB with SOR 15 ms CB with UVR 15ms Multiple Order: 1 piece(s) Power loss: at Nominal Operating Conditions for Pole 17.8 W Rated current (In): 250 A Nominal frequency (f): 50 / 60 Hz Impulse withstand voltage (Uimp): 8kV Instantaneous short-circuit rated current setting (Ii): 2500 A Rated insulation voltage (Ui): 800 V Rated operating voltage: 690VAC 500V DC Rated service short circuit capacity (Ics): (220VAC) 50kA (230 V AC) 50 kA (240VAC) 50kA (380VAC) 27kA (415VAC) 36kA (440VAC) 19kA (500VAC) 15kA (525VAC) 9.75kA (690VAC) 3.75kA (250 V DC) 2 Poles in Series 36 kA

Read more less

Abb 1SFL427001R1311  Contactors over 100A - AF09…AF2650 three-pole contactors with AC and DC coil - 55 kW (AC-3 400 V). Technical data Number of main contacts NA: 3 Number of main NC contacts: 0 Number of auxiliary contacts NO: 1 Number of NC auxiliary contacts: 1 Rated operating voltage: Main Circuit 690 V Nominal frequency (f): Main Circuit 50 / 60 Hz Conventional free air thermal current (Ith): according to IEC 60947-4-1, Open Contactors q = 40 °C 160 A Rated operating current AC-1 (Ie): (690V) 40°C 160A (690V) 60°C 145A (690V) 70°C 130A Rated operating current AC-3 (Ie): (415V) 55°C 116A (440V) 55°C 116A (500V) 55°C 110A (690V) 55°C 65A (380 / 400 V) 55 °C 116 A (220 / 230 / 240 V) 55 °C 116 A Rated operating current AC-3e (Ie): (415V) 60°C 116A (440V) 60°C 116A (500V) 60°C 110A (690V) 60°C 65A (380 / 400 V) 60 °C 116 A (220 / 230 / 240 V) 60 °C 116 A Rated operating current AC-3 (Pe): (415V) 55kW (440V) 75kW (500V) 75kW (690V) 55kW (380 / 400 V) 55 kW (220 / 230 / 240V) 30kW Rated operating current AC-3e (Pe): (415V) 55kW (440V) 75kW (500V) 75kW (690V) 55kW (380 / 400 V) 55 kW (220 / 230 / 240V) 30kW

Read more less

Abb 1SFL487102R1311 Contactors over 100A - Four-pole contactors AF09...AF370 and EK550..EK1000-275 A (AC-1 690 V) Technical data Number of main contacts NA: 4 Number of main NC contacts: 0 Number of auxiliary contacts NO: 1 Number of NC auxiliary contacts: 1 Rated operating voltage: Main Circuit 1000V Nominal frequency (f): Main Circuit 60 Hz Conventional free air thermal current (Ith): according to IEC 60947-4-1, Open Contactors q = 40 °C 275 A Rated operating current AC-1 (Ie): (1000V) 40°C 250A (1000V) 55°C 225A (1000V) 60°C 225A (1000V) 70°C 185A (690V) 40°C 275A (690V) 55°C 250A (690V) 60°C 250A (690V) 70°C 200A Rated operating current AC-3 (Ie): (415V) 55°C 190A (440V) 55°C 190A (380 / 400 V) 55 °C 190 A (220 / 230 / 240 V) 55 °C 190 A Rated operating current AC-3 (Pe): (415V) 90kW (440V) 110kW (380 / 400 V) 90 kW (220 / 230 / 240V) 55kW

Read more less

Abb 1SVR427031R0000 Switching power supplies, Single phase CP-E series, CP-C.1, CP-E24/1.25 Input 85-264V AC / 90-375V DC, output 24..28V DC 1.25A, Command, control, electronics and safety systems products Technical data Function: Switching power supplies Number of phases: 1 Nominal Input Voltage (UIN): 100 ... 240 V AC Input voltage (Uin): 85 ... 264 V AC 90 ... 375 V DC Nominal frequency (f): 50 Hz Nominal frequency: 47 ... 63 Hz Output Characteristics: U/I Characteristic Curve Rated Output Power: 30W Output power: 30W Rated Output Voltage: 24V DC Output voltage (Uout): 24V DC Rated Output Current: 1.25 A Output current: 1.25 A

Read more less

Abb 2CDS252001R0064 The System pro M compact S200 miniature circuit breakers protect installations from overloads and short circuits, ensuring reliability and safety in operations. Technical data Reference standards: IEC/EN 60898-1 IEC/EN 60947-2 UL 1077 Intervention feature: C Rated operating voltage: according to IEC 60898-1 400 V AC according to IEC 60898-1 400 V according to IEC 60947-2 440 V AC Operating voltage: Maximum (Incl. Tolerance) 125 V DC Maximum (Incl. Tolerance) 440 V AC Minimum 12V AC Minimum 12V DC Rated insulation voltage (Ui): according to IEC/EN 60664-1 440 V Impulse withstand voltage (Uimp): 4kV at 2000 m 5 kV at Sea Level 6.2 kV Dielectric test voltage: 50/60 Hz-1 min: 2 kV Input voltage type: AC/DC Rated current (In): 6 A Rated short circuit power: (AC) 6kA (DC) 6kA (400VAC) 6kA (400V) 6kA Rated extreme short circuit power (Icu): (125V DC) 10kA (230 V AC) 20 kA (400VAC) 10kA (440VAC) 10kA (48V DC) 20kA (230V) 20kA (400V) 10kA

Read more less

Abb 1SDA063439R1 TMAX T5V 630 1150V AC FIXED THREE-POLE SWITCH WITH FRONT TERMINALS FOR Cu CABLES AND THERMO-MAGNETIC RELEASES TMA R 500 I3=2500...5000 A Technical data Electrical life: 5000 cycle(s) 60 cycles per hour Mechanical durability: 20000 cycle(s) 120 cycles per hour Number of poles: 3 Power loss: at Nominal Operating Conditions for Pole 28.8 W Rated current (In): 500 A Impulse withstand voltage (Uimp): 8kV Rated insulation voltage (Ui): 1000 V Rated operating voltage: 1150VAC 1000V DC Rated service short circuit capacity (Ics): (1000VAC) 10kA (1150VAC) 6kA Rated extreme short circuit power (Icu): (1000VAC) 20kA (1150VAC) 12kA Rated uninterrupted current (Iu): 630 A Release: TMA Release Type: TM

Read more less