SIEMENS SIMATIC S7-1200, CPU 1212C  6ES72121AE400XB0 SIMATIC S7-1200, CPU 1212C, compact CPU, DC/DC/DC, onboard I/O: 8 DI, DC 24 V; 6 DO DC 24V; 2 AI 0...10V DC, power supply: DC DC 20.4...28.8V, program memory / data memory 100 KB General informationProduct type designation CPU 1212C DC/DC/DCFirmware version V4.6 Engineering with● Programming package from STEP 7 V18 Supply voltageRated value (DC)● DC 24 V YesPermissible range, lower limit (DC) 20.4 VPermissible range, upper limit (DC) 28.8 VReverse polarity protection YesLoad voltage L+● Rated value (DC) 24 V● Permissible range, lower limit ( DC) 20.4 V● Allowable range, upper limit (DC) 28.8 V Input currentCurrent consumption (nominal value) 400 mA; CPU onlyCurrent consumption, max. 1 200 mA; CPU with all expansion modulesInrush current, max. 12A; at DC 28.8 V I²t 0.5 A² s Output currentfor backplane bus (DC 5 V), max. 1 000 mA; max. DC 5 V for SM and CM Transducer power supply24 V transducer power supply● 24 V L+ minus 4 V DC min. Power dissipationPower dissipation, typ. 9 W MemoryWork memory● integrated 100 KBLoad memory● integrated 2 MB● insertable (SIMATIC Memory Card), max. with SIMATIC Memory Card Back-up collision● present Yes● maintenance-free Yes● without battery Yes CPU processing times for bit operations, typ. 0.08 μs; / instruction

Read more less

SIEMENS SIMATIC S7-1500F 6ES75173FP000AB0 SIMATIC S7-1500F, CPU 1517F-3 PN/DP, central processing unit with 3MByte work memory for the program and 8MByte for the data, 1st interface: PROFINET IRT with 2 Port Switch, 2nd interface: PROFINET RT, 3rd interface: PROFIBUS, 2 ns bit performance, SIMATIC Memory Card required. General information: Product type designation CPU 1517F-3PN/DPHardware version FS10Firmware version V3.0● FW update possible Yes Product function● I&M data Yes; I&M0 ... I&M3● Isochronous operation Yes; Decentrally and centrally; with min. OB 6 x cycle of 250 μs(decentrally) and 1 ms (centrally) Engineering with● STEP 7 TIA Portal configurable/integrated starting fromversion V18 (FW V3.0); from V13 Update 3 (FW V1.6) Configuration controlvia data set Yes DisplayScreen diagonal [cm] 6.1 cm Control elementsNumber of keys 6Operating mode selector 1 Supply voltageRated value (DC) 24 VPermissible range, lower limit (DC) 19.2 VPermissible range, limit upper (DC) 28.8 VReverse polarity protection Yes Mains and voltage failure buffering● Mains/voltage failure buffering time 5 ms● Repetition rate, min. 1/s Input currentCurrent consumption (nominal value) 1.55 AInrush current, max. 1.9A; Nominal value I²t 0.02 A²·s PowerPower supply in the backplane bus 12 WPower absorbed by the backplane bus (balanced) 30 W Power dissipationPower dissipation, typ. 24 W MemoryNumber of slots for SIMATIC Memory Card 1SIMATIC Memory Card required Yes

Read more less

SIEMENS SIMATIC S7-1200, CPU 1214C 6ES72141HG400XB0 SIMATIC S7-1200, CPU 1214C, compact CPU, DC/DC/relay, onboard I/O: 14 DI DC 24 V; 10 DO relay 2A; 2 AI 0...10V DC, power supply: DC DC 20.4...28.8V, program memory / data memory 150 KB General information: Product type designation CPU 1214C DC/DC/relayFirmware version V4.6 Engineering with● Programming package from STEP 7 V18 Supply voltageRated value (DC)● DC 24 V YesPermissible range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Load voltage L+● Rated value (DC) 24 V● Permissible range, lower limit (DC) 20.4 V● Allowable range, upper limit (DC) 28.8 V Input currentCurrent consumption (nominal value) 500 mA; CPU onlyCurrent consumption, max. 1 500 mA; CPU with all expansion modulesInrush current, max. 12A; at 28.8 V I²t 0.8 A²·s Output currentfor backplane bus (DC 5 V), max. 1 600 mA; max. DC 5 V for SM and CM Transducer power supply24 V transducer power supply● 24 V L+ minus 4 V DC min. Power dissipationPower dissipation, typ. 12 W MemoryWork memory● integrated 150 KBLoad memory● integrated 4 MB● insertable (SIMATIC Memory Card), max. with SIMATIC Memory Card Infill collision● present Yes● maintenance-free Yes● without battery Yes CPU processing timesfor bit operations, typ. 0.08 μs; / instruction

Read more less

SIEMENS DIGITAL OUTPUT SM 1226, F-DQ 4X 24VDC 6ES7226-6DA32-0XB0 SIMATIC S7-1200, digital output module SM 1226, F-DQ 4x DC 24V 2A, PROFIsafe, width 70mm, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508) . General information:Product type designation SM 1226 F-DQ 4 x 24 VDC Supply voltageAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VVoltage supply required according to NEC class 2 No Input currentfrom backplane bus DC 5 V, max. 125 mA Digital outputs● from load voltage L+, max. 170 mA Power dissipationPower dissipation, typ. 8 W Digital outputsNumber of outputs 4● in groups of 1Short circuit protection Yes Interrupting capacity of outputs● with ohmic load, max. 30 Hz● with lamp load, max. 10Hz Output voltage ● Nominal value (DC) 24 V Output current● for signal "1" rated value 2 A● for signal "1" permissible range, max. 10 mA ... 2.4 A● for signal "0" residual current, max. Switch on PNP: 0.5 mA, max.; NPN switch: 0.5 mA, max. Cable length● with shielding, max. 200 m● unshielded, max. 200 m Alarms/diagnostics/status informationDiagnostic display LED● for output status Yes Degree of protection and safety classIP protection degree IP20Standards, approvals, certificatesCE mark YescULus Yes FM approval YesMaximum safety class achievable in safety operation● Performance Level according to ISO 13849-1 Category 4, PL e● SIL according to IEC 61508 SIL 3

Read more less

SIEMES SIMATIC S7-1200, CPU 1214C  6ES72141AG400XB0 SIMATIC S7-1200, CPU 1214C, compact CPU, DC/DC/DC, onboard I/O: 14 DI DC 24 V; 10 DO DC 24V; 2 AI 0...10V DC, power supply: DC DC 20.4...28.8V, program memory / data memory 150 KB. General information: Product type designation CPU 1214C DC/DC/DCFirmware version V4.6 Engineering with● Programming package from STEP 7 V18Supply voltageRated value (DC)● DC 24 V Yes Allowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Load voltage L+● Rated value (DC) 24 V● Permissible range, lower limit (DC) 20.4 V● Allowable range, upper limit (DC) 28.8 V Input currentCurrent consumption (nominal value) 500 mA; CPU onlyCurrent consumption, max. 1 500 mA; CPU with all expansion modulesInrush current, max. 12A; at 28.8 V I²t 0.5 A²·s Output currentfor backplane bus (DC 5 V), max. 1 600 mA; max. DC 5 V for SM and CM Transducer power supply24 V transducer power supply● 24 V L+ minus 4 V DC min. Power dissipationPower dissipation, typ. 12 W MemoryWork memory● integrated 150 kbyte Load memory● integrated 4 MB● insertable (SIMATIC Memory Card), max. with SIMATIC Memory Card Back-up collision● present Yes● maintenance-free Yes● without battery Yes CPU processing timesfor bit operations, typ. 0.08 μs;   

Read more less

SIEMENS SIMATIC S7-200 6ES72310HC220XA0 SIMATIC S7-200, analog input module EM 231, only for S7-22X CPU, 4 AI, 0-10V DC, 12 bit converter - Spare part. General information: Input currentfrom load voltage L+ (without load), max. 60 mAfrom backplane bus DC 5 V, max. 20 mA Power dissipationPower dissipation, typ. 2 W Analog inputsNumber of analog inputs 4; DifferenceAllowed input voltage for voltage input (destructivelimit), max. 30 VPermissible input current for current input (destructivelimit), max. 32 mA Input ranges● Voltage Yes● Current Yes● Thermocouple No● Thermoresistance No● Resistance No Input ranges (nominal values), voltages● 0 ... +5 V Yes— Input resistance (0 ... 5 V) 10 MΩ● 0 ... +10 V Yes— Input resistance (0 ... 10 V) 10 MΩ● -2.5 V ... +2, 5 V Yes— Input resistance (-2.5 V ... +2.5 V) 10 MΩ● -5 V ... +5 V Yes— Input resistance (-5 V ... +5 V) 10 MΩ Input ranges (nominal values), currents● 0 ... 20 mA Yes— Input resistance (0 ... 20 mA) 10 MΩ Thermocouple (TC)Temperature compensation— parameterizable No Cable length● with shielding, max. 100m; to the sensorAnalog value generation for the inputsIntegration and conversion time / resolution per channel● Resolution with overrange (bit incl. sign),max. 12 bit● Interference voltage suppression for frequencyinterference f1 in Hz 40 dB, DC ... 60 V for interference frequency 50 / 60 Hz● Conversion time (per channel) 250 μs6ES72310HC220XA0  

Read more less

SIEMENS COMMUNICATION PROCESSOR CP 1543-1 6GK75431AX000XE0 CP 1543-1 communications processor for connecting SIMATIC S7-1500 to Industrial Ethernet; TCP/IP, ISO, UDP, S7 communication, IP broadcast/multicast, security (VPN, firewall) diagnostics SNMPv1/v3, DHCP, FTP client/server, e-mail, IPv4/IPv6, IEEE 802.1X (radius), time synchronization via NTP, 1x RJ45 (10/100/1000 Mbit). General information: Transmission rate● on interface 1 10 ... 1000 Mbit/s Interfacesnumber of interfaces / according to Industrial Ethernet 1number of electrical connections● on interface 1 / according to Industrial Ethernet 1 carrying out the electrical connection● on interface 1 / according to Industrial Ethernet RJ45 port Supply voltage, absorbed current, dissipated powertype of voltage / of the DC supply voltagesupply voltage / 1 / from backplane bus 15 Vrelative symmetrical tolerance / with DC● with 15 V 3 % current consumption● from backplane bus / with DC / with 15 V / typ. 0.35 A power dissipation [W] 5.3 W Environmental conditions ambient temperature● for vertical installation / during operation 0 ... 40 °C● with horizontal installation / during operation 0 .. .60 °C● during storage -40 ... +70 °C● during transport -40 ... +70 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection degree IP20 Design, dimensions and weightsmodule format Single-width compact S7-1500 modulewidth 35 mmheight 142 mmdepth 129 mmnet weight 0.35 kgfastening type● mounting on S7-1500 profile rail Yes Product features, product functions, product components / genericnumber of units● per CPU / max. 8● note dependent on CPU type

Read more less

SIEMENS SIRIUS SAFETY RELAY STD RELAY 3NO,1NC 3SK1111-2AB30 SIRIUS safety device basic device Standard series relay enabling circuits 3 NO contacts plus relay signaling circuit 1 NC Us = AC/DC 24 V spring-type terminal (Push-in). General technical data:IP protection class of the enclosure IP20contact protection against electric shock finger protectionRated insulation voltage 300 V Room temperature● during storage -40 ... +80 °C● during operation -25 ... +60 °Catmospheric pressure according to SN 31205 90 ... 106 kParelative humidity during operation 10 ... 95 %Installation altitude for altitude above sea level max. 4 000 m; For derating see Product Communication 109792701Vibration resistance according to IEC 60068-2-6 5 ... 500 Hz: 0.75 mm10g/11ms shock resistanceRated impulse withstand voltage 4 000 VeMC interference emission IEC 60947-5-1, IEC 61000EMC related installation environment This product is suitable for class B environment and can be usedeven in a domestic environment.Overvoltage category 3pollution level 3reference code according to IEC 81346-2:2009 Fdissipated power [W] max. 2WNumber of inputs for 1 or 2 channel sensors 1cascade connection execution noneExecution of the safety technology wiring of the inputssingle channel and redundant product feature cross-circuit protection  Yes Safety Integrity Level (SIL)● according to IEC 62061 3● according to IEC 61508 3performance Level (pL)● according to ISO 13849-1 and category according to EN ISO 13849-1 4Safe failure rate (SFF) 99%PFHD for high demand rate according to EN 62061 1,7E-9 1/hPFDavg for low demand rate according to IEC 61508 1E-6T1 value for proof test interval or duration of use according to IEC 61508 20 a.

Read more less

SIEMENS METAL PLAN POCKET 8MF1000-2VU SIVACON, circuit diagram pocket, steel, galvanized VersionProduct brand SIVACONProduct name Pattern pocketProduct execution Steel

Read more less

SIEMENS SIMATIC NET SCALANCE XB005, 6GK500-50BA0-01AB2 SCALANCE XB005 unmanaged Industrial Ethernet Switch for 10/100 Mbit/s; for the configuration of small star and linear structures; LED diagnostics, IP20, AC/DC 24V power supply, with 5x 10/100 Mbit/s Twisted Pair Ports with RJ45 connectors. General Information: Transmission speedtransmission speed 10 Mbit/s, 100 Mbit/s Interfaces / for communication / max. configuration with modular devicesnumber of electrical ports / max. 5interfaces / for communication / integratednumber of electrical connections● for network components or terminal equipment 5; RJ45number of SC ports at 100 Mbit/s● for multimode 0 interfaces / othersnumber of electrical connections● for power supply 1execution of electrical connection● for power supply Terminal block with 3 poles Power supply voltage, current consumption, power dissipatedtype of voltage / 1 / of the DC power supply● power supply voltage / 1 / nominal value 24 V● power dissipated [W] / 1 / nominal value 1.68 W● power supply voltage / 1 / nominal value 19.2 ... 28.8 V● current consumption / 1 / max. 0.07 A● execution of electrical connection / 1 / forpower supplyTerminal block with 3 poles● integral part of the product / 1 / protection on the inputof power supply Yes● execution of protection / 1 / on the input forpower supply voltage 0.6 A / 60 Vtype of voltage / 2 / of the AC power supply● power supply voltage / 2 / nominal value 19.2 ... 28.8 V Environmental conditionsambient temperature● during operation -10 ... +60 °C● during storage -40 ... +80 °C● during transport -40 ... +80 °C Relative humidity● at 25 °C / no condensation / during operation / max. 95 %degree of protection IP IP20construction form, dimensions, and weightsconstruction form Boxwidth 45 mmheight 100 mm

Read more less

SIEMENS SINAMICS G120C PN 0.75KW ROW 6SL3210-1KE12-3AF2 SINAMICS G120C Rated power: 0.75kW with 150% overload for 3 sec. 3AC380-480V+10/-20% 47-63Hz Integrated class A filter I/O interface: 6DI, 2DO, 1AI, 1AO Integrated safe-torque-off Integrated fieldbus: PROFINET PN Degree of protection IP20/UL Open Size type: FSAA 173x 73x 178 (HxWxD) External 24V.

Read more less

Siemens IE FC RJ45 plug 180 2x2 6GK1901-1BB10-2AA0  Industrial Ethernet FastConnect RJ45 Plug 180 2x 2, RJ45 connector (10/100 Mbit/s) with robust metal housing and FC connection technology, for IE FC 2x 2 cable; cable exit at 180°. Suitability for use       For connection to IE FC TP 2 x 2 cables, suitable for quick assembly with the FastConnect system Transmission speed transmission speed / with Industrial Ethernet                10 Mbit/s, 100 Mbit/s Interfaces number of electrical connections      for Industrial Ethernet FC TP cables 4 for network components or terminal equipment 1 Electrical connection execution  for Industrial Ethernet FC TP cables Integrated insulation piercing contacts for TP FC installation cables with 4 conductors AWG 22 for network components or terminal equipment RJ45 connector execution of electrical connection / FastConnect     Yes Mechanical data material / housing            metal number of reuses        10 interlock execution        other Construction shape, dimensions, and weights cable exit type            cable exit at 180° width             13.7 mm height  16 mm depth           55 mm net weight        35 g connectable cable diameter      6.5 ... 6.5 mm connectable conductor cross-section              0.33 mm² Environmental conditions ambient temperature during operation -40 ... +85 °C during storage -40 ... +85 °C during transport -40 ... +85 °C relative humidity at 25 °C / without condensation / during operation / max. 95 % degree of protection IP   IP20 Product features, product functions, integral parts of the product / generic product feature           with PoE properties Yes with PoE+ properties Yes silicone-free Yes Integral part of the product  pull relief Yes Standards, specifications, approvals Certificate of suitability   compliance with RoHS Yes UL approval Yes cULus approval Yes railway use according to EN 50155 No standards for structured cabling           C

Read more less

Siemens Industrial Ethernet FastConnect 6GK1901-0DB20-6AA0 Industrial Ethernet FastConnect M12 Plug PRO 2x2 M12 connector with robust metal housing and FC connection technology, with axial cable outlet (D-coded) 1 pack = 1 piece for SCALANCE X208 PRO and ET 200 PRO PN. Suitability for use: For connecting electrical cables to SCALANCE X208PRO, ET 200pro PN or ET 200eco PN, for quick assembly with the FastConnect system Transmission rate transmission rate / with Industrial Ethernet 10 Mbit/s, 100 Mbit/s Interfaces number of electrical connections for Industrial Ethernet FC TP 4 cables for network components or terminal equipment 1 Making the electrical connection for Industrial Ethernet FC TP cables Integrated insulation displacement contacts for 4-core TP FC installation cables AWG 22 for network components or terminal equipment M12 connector (D-coded) carrying out the electrical connection / FastConnect     Yes Mechanical data material / of the housing    metal number of reuses       10 execution of the interlock       Screw connection tightening torque / for M12 round connector / max. 0.6 N m coding connector / of the M12 round connector            D constructive form, dimensions and weights type of cable exit          180° cable exit width           19 mm height  19 mm depth         73 mm net weight        40 g connectable cable diameter      6.5 ... 6.5 mm connectable conductor cross-section           0.33 mm² environmental conditions Ambient temperature during operation -40 ... +85 °C during storage -40 ... +85 °C during transport -40 ... +85 °C Relative humidity at 25 °C / without condensation / during operation / max. 95 % Chemical resistance water resistant IP protection degree   IP65/67

Read more less

SIEMENS SITOP PSE200U SELECTIVITY MODULE 10A 6EP19612BA21  SITOP PSE200U 10 A 4-channel selective module input: DC 24 V/40 A output: DC 24 V/4x 10 A threshold value settable 3 ... 10 A with cumulative signaling contact. General information: Inputshape of the electrical network Regulated DC voltagesupply voltage with DC nominal value 24 Vinput voltage with DC 22 ... 30 Voverloadability for overvoltage 35 Vinput current at nominal value of theinput voltage 24 V nominal value 40 A Outputshape of the voltage curve at the output Regulated DC voltageformula for output voltage Ue - approx. 0.2 Vrelative overall tolerance of the known voltage Corresponding to the input supply voltagenumber of outputs 4output current up to 60 °C for each output nominal value 10 Avalue of trip settable for release current ofcurrent-dependent overload3 ... 10 Atype of trip value setting By potentiometerproduct characteristic parallel connection of outputs No type of activation of the outputs Simultaneous activation of all the outputs upon reaching the value ofsupply voltage regime > 20 V, delay time of 24 ms, 100ms or settable via DIP switch for sequential activation"load optimized" Efficiencyefficiency [%] 99 %power dissipation [W] at nominal value of theoutput voltage at nominal value of the output current typ.10 W Switch-off characteristic for each outputswitching characteristic● of the overcurrent switch-off IA = 1.0 ... 1.5 x set value, switch-off after approx. . 5 s● of the current limitation IA = 1.5 x set value, shutdown after typ. 100 ms● of immediate switch-off IA > set value and Ue residual current at switch-off typ. 1 mAReset execution via button for each outputRemote RESET function Non-floating 24 V input (signal level "high" at > 15 V) Protection and monitoringcarrying out protection on the 15 A input for each output (not accessible)running the display for normal operation Tricolor LED for each output: green LED for "Output switched on", yellow LEDfor "Output manually switched off", red LED for "Output switched off due to overcurrent" design of switching contact for signaling functionGroup signaling contact (changeover contact, loadability 0 ,1 A/DC 24 V).  

Read more less

SIEMENS DIGITAL INPUT SM 1221  6ES7221-1BH32-0XB0 Digital input unit SM 1221, 16DI, DC 24V, Sink/Source. General informationProduct type designation SM 1221, DI 16x24 VDCSupply voltageNominal value (DC) 24 VPermissible range, lower limit (DC) 20.4 VPermissible range, upper limit (DC) 28.8 VInput currentfrom backplane bus 5 V DC, max. 130 mA Digital inputs● from load voltage L+ (no load), max. 4 mA; per channeloutput voltage / headertransmitter supply voltage / header● present Yes Power dissipatedPower dissipation, typ. 2.5 WDigital inputs Number of entrances 16● in groups of 4 Input characteristic according to IEC 61131, Type 1 YesNumber of inputs that can be managed simultaneouslyall installation positions— up to 40 °C, max. 16 Horizontal mounting position— up to 40 °C, max. 16— up to 50 °C, max. 16 Vertical mounting position— up to 40 °C, max. 16 Input voltage● Rated value (DC) 24 V● for signal "0" 5 V DC with 1 mA● for signal "1" DC 15 V with 2.5 mA Input current● for signal "0", max. (permissible quiescent current) 1 mA● for signal "1", min. 2.5 mA● for signal "1", typ. 4 mA Delay in entry (with nominal input voltage value)for standard inputs— parameterizable Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of 4 for alarm inputs.

Read more less

SIEMENS SIMATIC HMI KTP900 BASIC 6AV2123-2JB03-0AX0 SIMATIC HMI, KTP900 Basic, Basic Panel, key/touch operation, 9" TFT display, 65536 colours, PROFINET interface, configurable from WinCC Basic V13/STEP 7 Basic V13, includes Open software Source, The provided free of charge see the attached CD. General information:Product type designation KTP900 Basic color PN DisplayDisplay design TFT display Widescreen, LED backlightScreen diagonal 9 inDisplay width 198 mmDisplay height 111.7 mmNumber of colors 65 536 Resolution (pixels)● Horizontal image resolution 800 pixels● Vertical image resolution 480 pixels Backlight● MTBF of backlight (at 25 °C) 20 000 h● Backlight dimmable Yes Control elementsKeyboard fonts● Function keys— Number of function keys 8— Number of function keys with LED 0● Keys with LED No● Keys system No● Numeric keypad Yes; Onscreen Keyboard● Alphanumeric Keyboard Yes; Onscreen Keyboard Touch operation● Version as touchscreen Yes; analog-resistive Mounting typeVertical installation positionVertical mounting possible (portrait format) YesHorizontal mounting possible (landscape format) YesMaximum tilt angle allowed without ventilationforced 35° Supply voltageType of supply voltage DCRated value (DC) 24 VPermitted range, limit lower (DC) 19.2 VAllowable range, upper limit (DC) 28.8 V Input currentCurrent consumption (nominal value) 230 mAImpulse current on insertion I²t 0.2 A²·s PowerActive power absorbed, typ. 5.5W

Read more less

SIEMENS SITOP PSU200M 24V/10A, VARNISHED PCB 6EP1334-3BA10-8AB0 SITOP PSU200M plus 10 A Stabilized power supply input: AC 120 ... 230/230 ... 500 V output: DC 24 V/10 A variant with protective paint. General information: EntranceSingle-phase and two-phase AC electrical network shapesupply voltage with AC● Initial value Setting by switch on the devicesupply voltage● 1 with AC 120 ... 230 V● 2 with AC 230 ... 500 Vinput voltage● 1 with AC 85 ... 264 V● 2 with AC 176 ... 550 VInput execution wide-range input YesOvervoltage overload capability 1300 Vpeak, 1.3 msoperating condition of the buffer due to lack of  mains voltageWith Ue = 120/230 V, typ. 150 ms with Ue = 400 Vbuffering time with nominal current valueoutput in case of mains voltage failure min.25 msOperating condition of the buffer due to lack of mains voltageAt Ue = 120/230 V, typ. 150 ms at Ue = 400 V mains frequency● 1 nominal value 50 Hz● 2 nominal value 60 HzMains frequency 47 ... 63 Hzinput current● with input voltage rating 120V 4.4A● with input voltage rating 230 V 2.4 A● with input voltage rating 500V 1.1Acurrent limitation of the inrush current at 25 °C max. 35 AI2t value max. 4 A² sexecution of protection T 6.3 A (not accessible)● of the network cable Circuit breaker recommended for single-phase operation: apart.from 6 A (10 A) characteristic C (B); required for two-phase operation:magnetothermal switch with bipolar coupling or switchautomatic 3RV2011-1EA10 (set to 3.8 A) or 3RV2711-1ED10 (UL489) with 230 V, 3RV2011-1DA10 (set to 3 A) or 3RV2711-1DD10 (UL 489) with 400/500 V Exitshape of the voltage curve at the output of the regulated DC voltage at free potentialOutput voltage with DC nominal value 24 Voutput voltage● on output 1 with DC nominal value 24 Voverall relative voltage tolerance 3 %relative regulation accuracy of the output voltage.

Read more less

SIEMENS SINAMICS G120C PN 1.5KW ROW  6SL3210-1KE14-3AF2 SINAMICS G120C Rated power: 1.5kW with 150% overload for 3 sec. 3AC380-480V+10/-20% 47-63Hz Integrated class A filter I/O interface: 6DI, 2DO, 1AI, 1AO Integrated Safe-Torque-Off Integrated fieldbus: PROFINET PN Degree of protection IP20/UL Open Size type: FSAA 173x 73x 178 (HxWxD) External 24V. General information: Max. output frequency:550 Hz Number of parallel hw interfaces:0 Number of analog inputs:1 Number of digital outputs:2 Maximum output voltage:480 V Number of analog outputs:1 Number of industrial ethernet hw interfaces:2 Number of serial hw tty interfaces:1 Mains voltage:380÷480 V Relative symmetrical mains frequency tolerance:5% Number of Profinet HW interfaces:2 Number of other hw interfaces:6 Depth:178mm Number of serial rs232 hw interfaces:1 Number of serial rs422 hw interfaces:0 Number of digital inputs:6 Height:173mm Max. power output with linear load at nominal output voltage:1.1 kW Number of USB HW interfaces:1 Length:73mm Nominal output current i2n:4.3 A Relative symmetrical mains voltage tolerance:-20% Max. power output with square load at nominal output voltage:1.5 kW Number of serial rs485 hw interfaces:

Read more less

SIEMENS COMMUNICATION PROCESSOR CP 1542SP-1 6GK7542-6UX00-0XE0 CP 1542SP-1 communications processor for connecting a SIMATIC S7-ET 200SP module to Industrial Ethernet; open IE communication (TCP/IP, ISO on TCP, UDP), PG/OP, S7 routing, IP broadcast/multicast, SNMPV1, DHCP, e-mail, IPV4/IPV6, time synchronization via NTP, access to the company's web server CPU, BusAdapter required. General information: Baud rateBaud rate● on interface 1 10 ... 100 Mbit/sinterfacesnumber of interfaces / according to Industrial Ethernet 1number of electrical connections● on interface 1 / second Industrial Ethernet 2establishment of electrical connection● on interface 1 / second Industrial Ethernet via ET 200SP BusAdapter (RJ45, FC, LC, SCRJ), integrated switch Supply voltage current absorbed, power dissipatedtype of voltage / of the supply voltage DCsupply voltage 24 Vsupply voltage 19.2 . .. 28.8 Vpower dissipated [W] 6 Wambient conditionsambient temperature● for vertical installation / during operation -30 ... +50 °C● with horizontal installation / during operation -30 ... +60 °C● during storage -40 ... +70 °C● during transport -40 ... +70 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection degree IP20 Constructive form, dimensions and weightswidth 60 mmheight 117 mmdepth 74 mmnet weight 0.18 kgtype of fastening● mounting on 35 mm DIN rail Yesproduct features, product functions, product components / genericnumber of units● per CPU / max. 2● note 2 CPs can be inserted for each CPU, simultaneous operation possiblewith BA Send and CM DPpower data / open communicationnumber of connections possible / for open communication● via T blocks / max. 32 volumes of data.

Read more less

SIEMENS COMMUNICATION MODULE CM 1542-1 6GK7542-1AX00-0XE0 CM 1542-1 communication module for connecting S7-1500 to PROFINET as IO controller or IO device: TCP/IP, ISO on TCP, UDP, S7 communication, IP broadcast multicast, SNMPV1, time synchronization via NTP, 2xRJ45 ( 10/100 Mbit). General information: Transmission speedtransmission speed● on interface 1 10 ... 100 Mbit/s Interfacesnumber of interfaces / according to Industrial Ethernet 1number of electrical connections● on interface 1 / according to Industrial Ethernet 2making the electrical connection● on interface 1 / second Industrial Ethernet RJ45 port Supply voltage current absorbed, power dissipatedvoltage type / DC supply voltagesupply voltage / 1 / from backplane bus 15 Vrelative symmetric tolerance / with DC● with 15 V 3 % Current draw● from backplane bus / with DC / with 15 V / typ. 0.22APower dissipation [W] 3.3 Wenvironmental conditionsroom temperature● for vertical installation / during operation 0 ... 40 °C● with horizontal installation / during operation 0 ... 60 °C● during storage -40 ... +70 °C● during transport -40 ... +70 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection degree IP20Construction form, dimensions and weightsunit format Single-width S7-1500 compact unitwidth 35 mmheight 142 mmdepth 129 mmnet weight 0.4 kg Type of fixing● S7-1500 profile rail mounting Yesproduct features, product functions, product integral parts / genericnumber of units● for each CPU / max. 8● Note dependent on CPU type

Read more less

SIEMENS S7-1500, DI 32X24VDC HF 6ES7521-1BL00-0AB0 SIMATIC S7-1500, DI 32xDC 24V HF digital input module, 32 channels in groups of 16; of which 2 inputs can be used for counting; input delay 0.05..20ms input type 3 (IEC 61131); diagnostics; Process interrupt: front connector (screw terminals or push-in) to be ordered separately. General informationProduct type designation DI 32x24VDC HFHardware version from FS04Firmware version V2.2.1● FW update possible YesProduct function● I&M data Yes; I&M0 ... I&M3● Isochronous operation Yes● Prioritized start Yes Engineering with● STEP 7 TIA Portal configurable/integrated from theversionV13 SP1 / -● STEP 7 configurable/integrated from version V5.5 SP3 / -● PROFIBUS from version GSD/GSD revision V1.0 / V5.1● PROFINET from GSD version/GSD revision V2.3 / - Operating mode● DI Yes● Counter Yes● Oversampling No● MSI Yes Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC ) 28.8 VReverse polarity protection Yes Input currentCurrent consumption, max. 40mA; 20 mA each group with DC 24 V supply voltage PowerPower draw from backplane bus 1.1 WPower lossPower loss, typ. 4.2 WDigital inputs Number of inputs 32parameterizable digital inputs YesRead on m/p Read on PInput characteristic according to IEC 61131, Type 3 Yes Digital input functions, parameterizable● Gate start/stop Yes● Digital input freely usable Yes

Read more less

SIEMENS SIMATIC S7- 1200F 6ES7214-1AF40-0XB0 SIMATIC S7-1200F, CPU 1214 FC, compact CPU, DC/DC/DC, onboard I/O: 14 DI DC 24 V; 10 DO DC 24V; 2 AI 0...10V DC, power supply: DC DC 20.4...28.8V, program memory / data memory 200 KB General information Product type designation CPU 1214FC DC/DC/DCFirmware version V4.6Engineering with● Programming package from STEP 7 V18 Power supply voltageNominal value (DC)● DC 24 V YesPermissible range, lower limit (DC) 20.4 VPermissible range, upper limit (DC) 28.8 VReverse polarity protection Yes Load voltage L+● Nominal value (DC) 24 V● Permissible range, lower limit (DC) 20.4 V● Permissible range, upper limit (DC) 28.8 VInput currentCurrent consumed (nominal value) 500 mA; Only CPUMaximum current consumed 1,500 mA; CPU with all expansion unitsMaximum inrush current 12 A; at 28.8 VI²t 0.5 A²·sOutput currentfor backplane bus (DC 5 V), max. 1,600 mA; max. DC 5 V for SM and CMTransducer power supplyPower supply for transducers at 24 V● 24 V L+ minus 4 V DC min. Power dissipationTypical power dissipation 12 W MemoryWorking memory● integrated 200 kbyteLoading memory● integrated 4 Mbyte● insertable (SIMATIC Memory Card), max. with SIMATIC Memory Card.

Read more less

SIEMENS SINAMICS G120 (DC 24V-2A) 6SL3246-0BA22-1FA0 Control Unit CU250S-2 PN Integrated PROFINET supports vector control Simple positioner EPos with Extended Functions license 4 configurable DI/DO 6 DI (3 F-DI), 5 DI 3 DO (1 F-DO) 2 AI, 2 AO Safety Integrated STO, SBC, SS1 Additional safety functions via "EXTENDED SAFETY" license SS encoder: D-CLiQ+HTL/TTL/SSI Resolver/HTL via terminal Degree of protection IP20 USB and SD/MMC interface. Electrical data Operating voltage via the Power Module   DC 24VExternal power supply DC 20 ... 29 VCurrent consumption, max. 2.00 APower dissipation 12.00 W Communication Communication  PROFINET, EtherNet/IP Inputs / Outputs Standard digital inputs  Number  15Switching level: 0→1 11VSwitching level: 1→0   5 VFail-safe digital inputs  Number   (Using 2 × standard DI) Digital outputs As relay changeover contact Number   2Output (ohmic load)  DC 30V, 0.5AAs a normally open relay contact  Output (ohmic load)   DC 30V, 0.5AAnalog / Digital Inputs Number  2 (Differential input)Analog outputs  Number 2 (Non-isolated output)

Read more less

SIEMENS SITOP PSU8200 6EP1336-3BA10 SITOP PSU8200 20 A stabilized power supply input: AC 120 ... 230 V DC 110 ... 220 V output: DC 24 V/20 A *Ex approval no longer available* The SITOP modular single-phase power supplies are technological power supplies for sophisticated solutions that offer maximum functionality for use in complex systems and machines. The wide-range input allows connection to any network in the world and guarantees great safety even in the presence of strong voltage fluctuations. The Power-Boost briefly supplies up to three times the nominal current. And in the event of overload, you can choose between constant current and latching shutdown. The very high efficiency reduces energy consumption and heat generation in the control cabinet, and the compact metal housing saves space. To further increase the availability of the 24 V, SITOP modular power supplies can be combined with buffer modules, DC- USV, redundancy and selective. Entrance Power grid form: Single-phase and two-phase AC or DC Supply voltage at AC min. nominal value: 120 V Supply voltage at AC max. nominal value: 230 V Supply voltage at AC initial value: 85 V Supply voltage at AC final value: 275 VSupply voltage with DC: 110 ... 220 VInput voltage at DC: 88 ... 350 V Input design wide-range input: YesOperating condition of the buffering in the event of a mains voltage failure: At Ue = 230 V Buffering time with nominal value of the output current in the event of a mains voltage failure min.: 20 msOperating condition of the buffering due to lack of mains voltage: With Ue = 230 VMains frequency 1 rated value: 50 Hz Mains frequency 2 rated value: 60 HzMains frequency: 47 ... 63 HzInput current at rated input voltage 120 V: 4.6 A Input current at rated input voltage 230 V: 2.5 A Current limitation of the inrush current at 25 °C max.: 20 AMax. I2t value: 5 A²·sProtection Execution: Yesof the mains cable: Recommended circuit breaker for single-phase operation: 10 Afeature C; required for two-phase operation: circuit breaker with bipolar coupling or circuit breaker3RV2711-1HD10(UL 489) with 120 V or 3RV2711-1ED10 (UL 489) with 230V

Read more less