Schneider Electric is a company specializing in energy management and automation, present in over 100 countries. It offers integrated solutions for various market segments.
The company's objective is to allow everyone to make the best use of energy and resources, combining progress and sustainability.
At Schneider they call this philosophy Life Is On
Schneider electric ATV12 speed variator - 0.37 kW - 0.55 HP - 200-240 V 1ph - c/diss.term. ATV12H037M2 The Schneider Electric Altivar 12 variable speed drive is capable of powering single-phase asynchronous motors with rated power up to 0.37 kilowatts/0.55 horsepower and rated voltage from 200 to 240 Vac. This variable speed/frequency drive (VSD / VFD) is designed for simple industrial and commercial machines and appliances, such as conveyor belts, pumps, extractors, access barriers and rolling mills. Its small footprint allows simple non-industrial equipment to be mounted in cabinets. It can be set up first while still inside its packaging without using the power supply, minimizing setup time. SoMove software compatibility saves and transfers configurations to spare, reducing maintenance downtime. Technical characteristicsNumber of digital inputs: 4Number of digital outputs: 2Number of analogue inputs: 1Number of analogue outputs: 1Number Relay Output: 1Interface: 2 RS 485 cablesConnector Type: 1 RJ45Continuous Output Current: 2.4A at 4kHzAccess Method: Serial Modbus Server Speed Variator Output Frequency: 0.5…400 HzSpeed Range: 1…20Sampling Duration: 20 ms, tolerance +/- 1 ms for logic input10 ms for analog inputLinearity Error: +/-0.3% of maximum value for analog input
€136,20
SCHNEIDER ELECTRIC Interface conventional buttons 4 channels MTN670804 Button interface, 4 channels plus. Generates an internal signal voltage for connecting 4 conventional buttons or floating contacts and for connecting 4 low-current LEDs. The cores have a length of 30 cm and can be extended to a maximum of 7.5 m. Technical dataTechnical characteristicsMarketResidentialSmall tertiary sector Product rangeKNXIP20 AssemblyCash in number of inputs4 Type of EntranceTrack
€72,75
SCHNEIDER ELECTRIC spaceLYnk logic controllerLSS100200 SpaceLYnk by Schneider Electric is the easiest way to build complete building automation solutions for commercial segments. Complete automation solution for small to medium-sized buildings with a complete architecture including KNX, DALI control, metering (Modbus, Smartlink RTU and IP offering) and boiler management (SSL). Complete automation solution for large buildings with a complete architecture managed by BMS of Schneider Electric and KNX, DALI control and measurement (Modbus, Smartlink RTU and IP offering). SpaceLYnk can be used as a gateway to translate and enable communication between different products and as an aggregator to store, analyze and send data (.csv files, for example). It can also be used as a user interface for displaying relevant information on mobile devices and as an event checker that sends emails in case of problems. Applications: logical functions. SCADA WEB visualization for PC and touch devices. Cross-standard gateway between KNX and Modbus RTU/TCP. BACnet Server (500 points). Integration with third party devices over RS-232 (IR, AV). Programming. Camera streaming. Data logger with trends. Pre-made Modbus models. Easy blocking programming. Up to 50 users with different logins and passwords. BACnet certified BACnet Application Specific Controller (B-ASC). New icons. Supply voltage: 24 V DC. Power consumption: 2W. LED indicator 1: Green LED (CPU load). LED indicator 2: Green LED (Operation) or Red LED (Reset). Interface: 1 KNX, 1 10BaseT/100BaseTX, 1 RS-485 (including 47K Ohm bias resistors, without termination). 1 RS-232, 1 USB2.0, 1 reset button. Terminal: KNX bus: 2 x 0.8 mm bus connection terminal. Power supply: clamp, 0.5mm²-1.5mm². Serial: terminal, 0.5 mm²-1.5 mm². Operation: -5 °C to +45 °C. Environment: Can be used at heights up to 2000 m above sea level (SLM). Max. humidity: 93%, non-condensing. Dimensions: 90 x 52 x 58 mm (H x W x D). Device width: 3 modules, approx. 54 mm. Note: Views can be automatically generated for smartphones, tablets and touch panels using the EConfigure KNX Lite software (LSS900100).
€2.033,99
SCHNEIDER ELECTRIC Regulated switching power supply - Three phase - 400 V AC - 24 V - 20 A ABL8WPS24200 Universal stabilized switching power supply, intended for powering, in 24 V DC, the auxiliary circuits of automation systems. Compact, and with switching technology, it guarantees a high degree of stability of the output voltage and represents the ideal complement for the Modicon M340, Premium and Quantum ranges. Additional functional modules can be associated in order to guarantee continuity of service and at the same time be able to discriminate the protection of the powered systems. It guarantees an output voltage equal to the nominal value of 24 V DC ±3%, regardless of the load (from empty to full load) and for any mains supply. Compliant with IEC standards and UL, CSA and TUV approved, it is suitable for universal use. It has protections that ensure optimal operation of the control and automation system. The protection operating mode can be configured according to your specific application needs: • Manual reset protection mode: following a defect that involves a current absorption higher than the nominal value, priority will be given to the output voltage: the power supply will stop completely before the voltage supplied can drop below 21 V DC. In this way, unwanted variations in the logical states of the PLC and powered actuators will be avoided. • Automatic reset protection mode: priority is given to the current to allow, for example, fault finding, or to guarantee continuity of service until the arrival of maintenance workers. When the defect appears, the nominal current continues to be supplied but at a voltage significantly lower than the nominal one of 24 V DC. When the fault disappears the voltage returns to its nominal value. Phaseo Universal power supplies also have a power reserve that allows them to supply a current of 1.5 In at regular intervals; in this way it is possible to avoid oversizing the power supply if devices characterized by high inrush currents must be powered. The diagnostic function of Phaseo Universal power supplies is shown on the front of the product via signaling LEDs (Uout and Iout) and via a potential-free relay contact which allows remote control. All Phaseo Universal power supplies are equipped with a potentiometer for regulating the output voltage to compensate for voltage drops along long cables. Click for a 360 degree view of SCHNEIDER ELECTRIC ABL8WPS24200
€233,99
Schneider Electric EcoStruxure Panel Server PAS800L EcoStruxure Panel Server is a gateway that provides the connection of wired or non-wired smart IoT devices to edge control software or cloud application. Connect Schneider Electric wireless devices such as PowerTag Energy, PowerLogic HeatTag, Power Tag Ambiant, Power Tag control, and more. Technical dataPower consumption in W3.5 W 24 V Communication Network TypeEthernet, 10/100BASE-TWi-Fi "2.4 GHz"Wi-Fi "5 GHz"Wireless, "IEEE 802.15.4"Modbus RTU, Modbus RTU client odd/even or no parity, at "1.2...115.2 kbit/s" Communication port protocolModbus TCPDHCPHTTPSNTP/SNTP"IPv4""IPv6"TCP/IP Communication Port Protocol2 RJ45: EthernetScrew Terminal Block: RS485 Number of server32 server device(s)Modbus RTU - without repeater128 server device(s)Modbus RTU - with repeater128 server device(s)Modbus TCP/IP40 server device(s)wireless - mixed85 server device(s)wireless - a seconda della configurazione Number of clients64 Modbus TCP/IP capacità memoria"32 GB" "eMMC"512 MB NAND numero di ingressi2 digitale
€764,00
SCHNEIDER ELECTRIC XPSMCMCP0802 The Schneider Electric XPSMCM safety controller CPU is powered by 24 VDC, has 8 digital inputs, 2 interlock inputs for start/restart, 2 output OSSD pairs, 4 test outputs and 2 status outputs and stud terminals. This configurable safety controller complies with the requirements of PL e/Category 4 according to EN/ISO 13849-1 and SILCL3 according to EN/IEC 62061. It is an appropriate solution for machines with a limited number of safety functions that require configuration flexibility of a safety controller. It can be used as a standalone or with fourteen expansion modules: the system is expandable up to 128 inputs, 16 outputs and up to 32 diagnostic status outputs, ideal for machines that require monitoring of multiple safety functions. Click for large 360 view of SCHNEIDER ELECTRIC XPSMCMCP0802
€259,99
SCHNEIDER ELECTRIC MODULE 8 ANALOGUE INPUTS ISOL. RTU BMXAMI0810 The high resolution analog input module is part of the Modicon X80 modules. It has 8 isolated analog inputs (15 bits + sign). This module is connected via a 28-way removable terminal block. The module offers different voltage or current ranges for each of the inputs, depending on the configuration you choose. It occupies a single slot in the rack and has an enclosure that provides 20 protection to the electronics.
€419,38
SCHNEIDER ELECTRIC KNX ARGUS Presence with lighting control and IR receiver, polar whiteMTN630919 KNX ARGUS Presence with lighting control and IR receiver, polar white. The Schneider Electric KNX MTN630919 presence detector is Polar White in color and has a delay of 0-1 s. The corresponding mounting box can be recessed into the wall surface with flush mounting. With branch zone protection, the device improves the safety level. The duty cycle of this device is 15300 minutes. The maximum distance detected is 14 m when moving. Furthermore, it is halogen-free, a positive factor for health protection. It is free of mercury and heavy metals, particularly attentive to the environment and health. KNX combines all the main functions of buildings, such as lighting, heating, air conditioning or shading, in a single intelligent system, with significant energy savings and a reduction in installation times.
€95,91
