Schneider Electric Circuit breaker iC40a 1P+N C 16A 4500A A9P52616 This Acti9 iC40 product is a low voltage circuit breaker (MCB). It is a 1P+N switch with 1 protected pole and 16A rated current In and tripping curve C. The rated short-circuit breaking capacity reaches up to 6kA at 230VAC in compliance with the EN/IEC 60947-2 standard and 4500A at 230VAC in compliance with EN/IEC 60898-1. This product complies with industrial standards EN/IEC 60898-1 and residential standards EN/IEC 60947-2. This circuit breaker combines the functions of circuit protection against short circuits and overload current, control and isolation. Installation and wiring are simplified with clip-on functionality and easy maintenance. It has an electrical resistance of up to 20,000 cycles and a mechanical resistance of up to 20,000 cycles. The EU operating voltage is 230 V AC. The rated insulation voltage Ui is 400 V AC. The rated impulse withstand voltage Uimp is 4 kV. The operating frequency is 50 Hz or 60 Hz. It can be mounted on a DIN rail for modular installation. Its width is 2 steps of 9 mm. The pollution degree is 3. The color of the product is white (RAL 9003). Overall dimensions are (H) 18mm x (W) 85mm x (D) 74mm. The weight is 120 g. According to IEC 60529, the degree of protection is IP20 and IP40 in the cabinet. The operating temperature is between -25°C and 70°C. The storage temperature is between -40°C and 85°C. RangeActi9Product nameActi9 iC40Product typeModular switchDevice nameiC40ApplicationDistributionNumber of poles1P + Nnumber of protected poles1neutral positionLeftRated current [In]16 A Type of networkCARelease technologyMagnetothermalcurve codeCInterrupting capacity6 kA Icu compliant with EN/IEC 60947-2 at 230 V AC 50/60 Hz4500 A Icn compliant with CEI EN 60898-1 at 230 V AC 50/60 HzAptitude for sectioningYes compliant with EN/IEC 60947-2quality marksKEMAIMQ Technical dataMains frequency50/60 HzRated operational voltage [Ue]230 V AC 50/60 Hzmagnetic trip limit5...10 x In compliant with CEI EN 60898-18 x In +/- 20 % compliant with EN/IEC 60947-2Rated service breaking capacity [Ics] 4500 A 100 % Icn at 230 V AC 50/60 Hz conforming to CEI EN 60898-14.5 kA 75 % Icu at 230 V AC 50/60 Hz conforming to EN/IEC 60947-2class limitation3 conforming to CEI EN 60898-1Rated insulation voltage [Ui]400 V AC 50/60 Hz conforming to EN/IEC 60947-2 Rated impulse withstand voltage [Uimp]4 kV conforming to EN/IEC 60947-2contact position signalingYes Control typeLeverLocal signalingON/OFF indicationTrip indicatorInstallationCoupling InstallationDIN railpitch 9 mm2height85 mmwidth 18 mmdepth74 mmproduct weight120 gColorWhiteMechanical durability20000 cycleselectrical durability20000 cyclesDescription of locking options Padlock deviceconnections - terminalsCage terminals upper or lower part1…10 mm² flexibleCage terminals upper or lower part1…16 mm² rigidlength wire stripping14 mm for upper or lower part connectiontightening torque2 Nm upper or lower partdifferential protectionSeparate block

Read more less

Schneider Electric iSW 4P 32A disconnect switch A9S60432  This Acti9 iSW is a modular and reliable disconnector. It is a 4P, with a rated current of 32 A and an operating voltage of 415 V AC. The electrical resistance reaches up to 30000 cycles and the mechanical resistance reaches up to 300000 cycles. The operating temperature ranges from -20°C to +50°C. The storage temperature ranges from -40°C to +70°C. The degree of protection is IP20 and IP40 in one enclosure. It can be installed on a DIN rail. Width in 9mm steps is 4. Overall dimensions are (H)36mm x (W)77mm x (D)70mm. This disconnector is used for control. This product complies with EN/IEC 60669-2-4. Product Type: Switch disconnectorDevice Name: iSWApplication: ControlNumber of Poles: 4PUsage Category: AC-22AAbility to Disconnect: YesRated Operating Current: [Ie] 32 A at 415 V AC 50/60 HzRated Operational Voltage [Ue]: 415 V AC 50/60 HzRated Insulation Voltage [Ui]: 500 V AC 50/60 Hz conforming to CEI EN 60669-2-4Rated Impulse Withstand Voltage [Uimp]: 4 kV Control type: LeverLocal signaling: ON/OFF indicationContact position signaling: YesInstallation: Fixed Installation Guide: DINpitch 9 mm4height77 mm width36 mmdepth70 mmColourWhiteMechanical durability300000 cycleselectrical life30000 cyclesconnections - terminalsCage terminals - 1 x 10 mm² - rigidCage terminals cage - 1 x 10 mm² - flexibleCage terminals - 2 x 10 mm² - flexible with ring nutwire stripping length9 mmTightening torque 1.2 Nm

Read more less

Schneider Electric Isolator switch. DC C60NA-DC 2P 20A 1000Vdc A9N61690 Acti9 C60NA-DC is a low voltage disconnect switch dedicated to disconnecting the string of photovoltaic modules and the photovoltaic inverter. It has a 2P pole. Its rated current is 50A at 700V DC, 32A at 800VDC and 20A at 1000VDC for a CC-21B usage category. Can be mounted on DIN rail for modular installation. Its width is 8 modules of 9 mm. It has an IP40 degree of protection (according to IEC/EN 60529) on its terminals in a modular enclosure. It is designed to isolate the string of photovoltaic modules and the inverter from the rest of the photovoltaic installation for maintenance operations in total safety. Its quick closing mechanism, regardless of the speed of operation of the lever, improves its operational life. The tripping or position signaling functions are provided remotely by adding electrical auxiliaries. The presence of the green stripe guarantees the physical opening of the contacts and allows operations on the downstream circuit to be carried out in total safety. This product complies with IEC/EN 60947-3. Acti9 RangeProduct Range C60Product Type Switch disconnectorProduct Name C60Device Name C60NA-DCApplication Switch Photovoltaic field PVProtection photovoltaic inverterNumber of Poles 2PUsage Category DC-21BAbility to Disconnect Complies with EN/IEC 60947-3Rated Operating Current [Ie] 20 A DC-21B 1000 V DC32 A DC-21B 800 V DC50 A DC-21B 700 V DCVoltage Drop 100 mV 5.02 mOhm 2 W 20 A151 mV 5.02 mOhm 4.53 W 30 A201 mV 5.02 mOhm 8.04 W 40 A251 mV 5.02 mOhm 12.55 W 60 ANominal Insulation Voltage [Ui]1000 V DCNominal Impulse Withstand Voltage [Uimp] 6 kVPolarity Sensitivity No (can protect against bi-directional current)Type of Control LeverLocal Signaling ON/OFF IndicationInstallation HookInstallationDIN rail9 mm pitch8height132.7 mmwidth72 mmdepth77.4 mmproduct weight0.545 kgColourWhiteMechanical durability20000 cycleselectrical durability300 cyclesconnections - terminalsCage terminal ( upper side) 1…35 mm² rigidCage terminal (upper side) 1…25 mm² flexiblePre-wired cable (lower side)wire stripping length14 mmtightening torque3.5 NmCompatibility codeC60NA-DC

Read more less

Schneider-Electric Vigirex RH99P 220/240VAC R.M 56273  RH99P is a front panel mounting differential protection relay. Protects from direct or indirect contact, fire hazards and motors. Measures the differential current in an electrical system across the associated toroid. PresentationRangeVigiPacTDevice nameRH99PProduct type Residual current protection relayrelay applicationProtection relayInstallationFront paneltype of differential protectionType AType of regulationSelectortype of residual differential sensitivity adjustmentAdjustable, 9 valuesEarth-leakage sensitivity0.03…30 AEarth-leakage time delayInstant for 0.03 A Adjustable, 9 values ​​0…4.5 s for 0.03…30 ACurrent sensors compatibilityVigiPacT TOA differential current sensorVigiPacT A differential current sensorVigiPacT L sensor differential current Conventional thermal current in enclosure [Ithe] 8 AMinimum load10 mA at 12 VRated supply voltage [Us]220. ..240 V AC 50/60 Hz 55...110%power consumption VA 4 VAMonitored distribution system1000 V - AC at 50/60 Hz (maximum) 1000 V - AC at 400 Hz (maximum)grounding system

Read more less

Schneider Electric Wireless PowerTag F63A 3PN upstream downstream A9MEM1570 PowerTag Energy F63 1P+N 110V is a wireless communication energy sensor. With its Flex design, it is dedicated to 3P+N devices, with rated current less than or equal to 63 A. It must be associated with a concentrator or gateway to provide circuit monitoring and diagnosis up to the load level. It is designed specifically for energy management, load monitoring and power availability applications. Includes accurate real-time measurements of active energy, active power, and voltage and power factor. In case of power failure, it sends voltage loss alarm and current value per phase before shutting down. PowerTag Energy 63A complies with IEC 61557-12. It's a PMD-i/DD/K55/1. The performance category is class 1. The maximum current of Imax is 63 A. The Base current Ib is 10 A. The saturation current is 130 A and the starting current Ist is 40 mA. The rated voltage Un is phase to neutral from 220VAC to 240VAC +/- 20% and phase to phase from 380VAC to 415VAC +/- 20%. The maximum consumption is less than or equal to 2 VA. It can be mounted on the top or bottom of the protection device. The color of the product is white (RAL 9003). The weight is 40 g. The degree of protection is IP20 and IK05. The operating temperature is between -25°C and +60°C. The storage temperature is between -40°C and +85°C. Mounting System With Screws: (clamps)Electrical Connection (VoltageSensing & Power Supply): Cables with cable endsWire Section: 1 rigid cable 1.5…16 mm²2 stranded cable 1.5…2.5 mm²2 rigid cable 1.5…2.5 mm²1 stranded cable 1.5…16 mm²Cable length: 0 ,25 mSupply Voltage: 220...240 V AC, +/- 20 %, phase to neutral380...415 V AC, +/- 20 %, phase to phaseMains Frequency: 50 Hz60 HzMaximum Power Consumption: 2 VAReference Standards: IEC 61557-12IEC 61010-1IEC 61010-2-030IEC 61326-1ETSI EN 300 328ETSI EN 301 487-1Height Sensing element: 20 mmWidth Sensing element: 54 mmDepth Sensing element: 46.6 mm

Read more less

Schneider-Electric Vigipact 200/440VAC 4P NSX250 LV429493 This is a Vigi differential module for the ComPact NSX 250 which provides earth leakage protection. It is used for 4 pole circuit breakers. PresentationProduct range"ComPacT NSX100...250 new generation""ComPact NSX100...250"Device nameVigiPacTProduct typeVigi add-onApplicationWiringRange compatibility"ComPacT new generation" "ComPacT NSX250 new generation" switch automaticCompact "ComPact NSX250" circuit breakerNumber of poles 4PRated current [In] 250 AType of differential protectionClass AClass ACType of residual differential sensitivity adjustmentAdjustabledifferential sensitivity0.03 A for class A0.1 A for class A0.3 A for class A0.5 A for class A1 A for class A3 A for class A10 A for class AC30 A for class ACResidual earth fault delay adjustment typeAdjustableResidual differential timing adjustment [Δt]0 ms60 ms150 ms300 ms500 ms800 ms1.2 s4 sTechnical characteristicsNetwork typeCAMains frequency50/ 60 Hz[Ue] rated operational voltage200...440 V AC 50/60 Hz conforming to IEC 60947-2differential protectionWith maximum interruption time800 ms overvoltage category IVEnvironmentProtection class against electrical dischargesClass II

Read more less

Schneider-Electric Energy sensor, PowerTag Flex (free mounting) 160A 3P/3P+N upper and lower position energy, PowerTag Flex (free mounting) 160A 3P/3P+N upper and lower position A9MEM1580 PowerTag Energy F160 3P/3P+N is an energy sensor for wireless communication. With its Flex design, it is dedicated to 3P and 3P+N devices, with 25 to 27 mm pitch between phases, with rated current up to 160 A.  PresentationProduct rangePowerLogicProduct namePowerTag F160Product type Monitoring sensorPoles3P3P + NMaximum current [Imax]160 Aproduct for specific applicationsEnergy managementOverload alarmPower factorLoad monitoringCircuit monitoringconcentrator compatibilityActi9 PowerTag Link CActi9 PowerTag LinkActi9 PowerTag Link HDHarmony Hub"EcoStruxure Panel Server Universal""EcoStruxure Panel Server Advanced"PrismaSet Activerange compatibilityActi9 Acti9 C120Acti9 Acti9 NG125 Compact Compact NSXmTeSys TeSys GV4Compact ComPacT INSActi9 Acti9 iSWActi9 Acti9 iSW-NAActi9 Acti9 iIDPowerPact PowerPact Bmeasurement type Active and reactive energyApparent energyActive and reactive powerApparent powerCurrentVoltagePower factorInternal temperatureFrequencyaccuracy classClass 1 active energy conforming to IEC 61557-12Class 2 reactive energy conforming to IEC 61557-12Class 2 apparent energy conforming to IEC 61557- 12Class 1 active power conforming to IEC 61557-12Class 2 reactive power conforming to IEC 61557-12Class 2 apparent power conforming to IEC 61557-12Class 1 current conforming to IEC 61557 -12Class 0.5 voltage conforming to IEC 61557-12Class 1 power factor conforming to IEC 61557-12Class 0.5 frequency conforming to IEC 61557-12

Read more less

Schneider-Electric power link-TCP/IP WLESS 20POWERTAG A9XMWD20 This Acti9 PowerTag Link is an intelligent wireless communication module to Modbus TCP/IP concentrator. Must be paired with a PowerTag wireless communication energy sensor to provide circuit monitoring and diagnosis down to load level. Presentationrange of productActi9Product nameActi9 PowerTag LinkProduct typeIntelligent communication moduleDevice namePowerTag LinkApplication typeBasic measurement Energy EAdvanced load monitoring E, U, I, P, PFLoad alarmMax number of connected devicesUp to 20 wireless devicesmaximum current supplied 2 ANominal supply voltage [Us]110... 230 V AC +/- 15 %connectivity to devicesWireless monitoring sensorcommunication serviceEthernet Modbus TCP/IP serverWeb server web serverIntegrated web pageBMS compatibletransmission support mediumRadio frequency 2.4…2.4835 GHz PowerTag 20web servicesWeb page Technical characteristicsSpecific application I/OTotal pulse counterabsorbed power VA 5 VAImmunity to microinterruptions 10 ms

Read more less

Schneider Electric EcoStruxure Panel Server PAS800L   EcoStruxure Panel Server is a gateway that provides connection of wired or non-wired smart IoT devices to edge control software or cloud application. Connect wireless devices from Schneider Electric such as PowerTag Energy, PowerLogic HeatTag, Power Tag Ambiant, Power Tag control and others. Connects most Modbus/RS485 and Modbus/TCP devices on the market, including PowerMeters and Schenider Electric protection devices. Three-year data-logger with intuitive web pages that offer energy dashboarding, analysis of measurement trends and display of recorded alarms. Easily troubleshoot your system via integrated web pages with advanced diagnostic information and logs. Simple commissioning via integrated web pages or with EcoStruxure Power Commissioning which will offer commissioning reports and advanced functionality. The dimensions of the product are as follows: width 71.8 millimeters, depth 70.2 millimeters and height 85 millimeters. Power supply 24V DC 3W max. From -25°C to +70°C Operating temperature. 5-95% relative humidity. Key certifications including CE, UL/CSA, IEC61010, UL61010, IEC61974-1, marine certification, IEC61443-4-2, RCM, EAC and UKCA. The gateway can be DIN rail mounted in a modular enclosure. It has IP20 connectors, IM40 front and IP30 on the other faces. Two 10/100 Base-T Ethernet RJ45 connectors. Open type RS485 Modbus connector. External Wi-Fi antenna connector. External antenna connector for wireless devices. Two connectors for external Wi-Fi antenna and external antenna for wireless devices. Connector for two digital inputs for dry contact or WAGES. Direct cellular connection via external LTE router connected via Ethernet or Wi-Fi. Perfect for EcoStruxure Edge software such as Power Monitoring Expert, Power Operations and EcoStruxure Building Operations. Designed for EcoStruxure Cloud applications such as Facility Expert, Asset Advisor and Resource Advisor. Click for a video of SCHNEIDER ELECTRIC PAS800L  

Read more less