Schneider-Electric 24V 2.5A modular power supply ABLM1A24025 The ABLM regulated switching power supply (SMPS) provides direct current voltage. It has a rated input of 100V to 240V AC, a rated output current of 2.5A at 24V DC and a rated power output of 60W. It is ideal for providing the DC voltage needed for automation equipment designed for industrial applications , commercial and residential. PresentationProduct rangeModicon Power SupplyProduct typePower supplypower supply typeSwitching modeVariant optionModularNominal input voltage100...240 V AC single phase100...240 V AC phase to phasenominal power in W 60 Woutput voltage 24 V DCoutput power supply current 2.5 ATechnical characteristicsinput voltage limits90...264 V ACInput protection typeIntegrated fuse (non-replaceable) 3.15 AExternal protection (recommended) 20 A Curve BExternal protection (recommended) 20 A Curve CExternal protection (recommended) 10 A Curve BExternal protection (recommended) 6 A Curve CInrush current30 A at 115 V60 A at 230 V18 mm modules0.50 at 115 V AC0.39 at 230 V ACefficiency90 % at 115 V AC90 % at 230 V ACpower dissipated in W  6.5 Wcurrent absorptionTurn-on time Holding time> 20 ms 115 V AC> 60 ms 230 V ACStartup with capacitive loads3000 µFresidual ripplemean time between failures (MTBF)1300000 H at 25 °C, full load700000 H at 55 °C, 80 % loadoutput protection type Against overload and short circuits, protection technology: automatic resetAgainst over temperature, protection technology: manual resetAgainst overvoltage, protection technology: manual resetconnections - terminalsConnection to screw: 0.5...2.5 mm², (AWG 20...AWG 14) without wire end ferrule for outputScrew connection: 0.5...1.5 mm², (AWG 20. ..AWG 16) with wire end ferrule for outputScrew connection: 0.5...1.5 mm², (AWG 20...AWG 16) for inputline and load regulation Status LED1 LED (green) output voltagedepth55.6 mmheight 91 mmwidth53 mmproduct weight0.221 kgoutput connectionSerialParallelmounting supportTop hat type TH35 -15 rail conforming to IEC 60715Top hat type TH35-7.5 rail conforming to IEC 60715Double profile DIN railpanel mountingpower supplySELV conforming to IEC 60950-1 SELV compliant with IEC 60204-1SELV compliant with IEC 60364-4-41dielectric strength3000 V AC input / output

Read more less

Schneider-electric Differential lock A9Y80625  Acti9 Vigi iC40 is a modular additional residual current device. It is a 1P+N and the rated current is 25 A. The earth leakage protection class is type A with 30 mA sensitivity and voltage independent technology. PresentationRangeActi9Product typeResidual current add-on devicesDevice nameVigi iC40Range compatibilityActi9 Acti9 iC40Number of poles1P + Nneutral positionLeftRated current [In ]25 AType of networkCAdifferential sensitivity30 mADifferential protection timingInstantaneoustype of differential protectionType AProduct certificationsCEquality marksIMQOVETechnical characteristicsdevice position in the systemStarting pointMains frequency50/60 HzRated operational voltage [Ue]230 V AC 50/60 Hzresidual current release technology "Voltage independent"Rated insulation voltage [Ui]400 V AC 50/60 Hz conforming to CEI EN 61009-2-1Rated withstand voltage impulse [Uimp]4 kV compliant with CEI EN 61009-2-1Local signalingFault indicationInstallationCouplingInstallationDIN railelectrical connection to the circuit breakerBy screwspitch 9 mm 2height 95 mmwidth 36 mmdepth 74 mmproduct weight 90 gColour White

Read more less

Schneider Electric processor M340 20 modbus ethernet BMXP342020 The processor module is part of the Modicon M340 automation platform range. This high-performance processor module allows for up to 4 racks, 1,024 I/O and has a memory capacity of 4,096 KB. PresentationProduct rangeModicon M340 programmable controllersProduct typeProcessor moduleconceptTransparent Ready CANopennumber of racks 4number of slots on a single rack 11digital I/O processor capacity1024 I/O multi-rack configuration704 I/O rack configuration singleanalog I/O processor capacity.256 I/O multi-rack configuration66 I/O single rack configurationnumber of channels for specific applications 36MonitoringModbus diagnostic countersModbus event countersTechnical characteristicscontrol channelsProgrammable circuitstype of integrated connectionNon-isolated serial connection RJ45 character mode, transmission mode: asynchronous on baseband, RS232C, transmission mode: 2 shielded pairs at 0.3...19.2 kbit/s full duplexNon-isolated serial link RJ45 character mode, transmission mode : asynchronous on baseband, RS485, transmission mode: 1 shielded twisted pair at 0.3...19.2 kbit/s half duplexNon-isolated serial link RJ45, master/slave Modbus, RTU/ASCII, control mode transmission: asynchronous on baseband, RS232C, transmission mode: 1 shielded twisted pair at 0.3...19.2 kbit/s half duplexNon-isolated serial link RJ45, master/slave Modbus, RTU/ASCII, mode transmission: asynchronous on baseband, RS485, transmission mode: 1 shielded twisted pair at 0.3...19.2 kbit/s half duplexUSB port at 12 Mbit/sEthernet TCP/IP RJ45, transmission mode: 1 twisted pair at 10/100 Mbit/smax number of networks2 Ethernet communication module4 AS-Interface moduleembedded communication serviceBandwidth Management, Ethernet TCP/IPData Editor, Ethernet TCP/IPModbus TCP Messaging, Ethernet TCP/IPRack Viewer, Ethernet TCP/IPNetwork Administrator SNMP, Ethernet TCP/IPEthernet port10BASE-T/100BASE-TXnumber of devices per segment0…32 (character mode)0…32 (Modbus )number of devices2 point-to-point character mode2 point-to-point Modbus

Read more less

Schneider Electric Power supply with comm. regulated - 1 or 2 phases - 100..240 V AC - 24 V - 20 A ABL8RPM24200   PresentationProduct rangeModicon Power SupplyProduct typePower supplypower supply typeSwitching modeNominal input voltage100...120 V AC single phase, terminals: N-L1200...240 V AC phase to phase, terminals: L1-L2nominal power in W480 Woutput voltage24 V DCoutput power supply current20 Aadmissible temporary current amplification1.5 x In (for 4 s )anti-harmonic filterLow frequency harmonic currentsTechnical characteristicsinput voltage limits85...132 V AC170.. .264 V ACinrush current30 A18 mm modules0.68 at 240 V AC0.69 at 120 V ACefficiency88 % Output voltage adjustment24...28.8 V adjustablepower dissipated in W57.6 Wequipment suppliedPower factor corrector filter compliant with IEC 61000-3-2output protection typeAgainst overload, protection technology: manual or automatic resetAgainst overvoltage, protection technology: 30...32 V, manual resetAgainst short circuits, protection technology: manual or automatic resetAgainst undervoltage, protection technology: tripping with U Thermal, protection technology: automatic reset connections - terminalsRemovable screw terminal block: 2 x 2.5 mm², for diagnostic relayScrew terminal blocks: 3 x 0.5...3 x 4 mm², (AWG 22 ...AWG 12) for input connectionScrew terminal blocks: 1 x 0.5...1 x 4 mm², (AWG 22...AWG 12) for input earth connectionTerminal blocks screw: 4 x 0.5...4 x 4 mm², (AWG 22...AWG 12) for output connectionStatus LED1 LED (green and red) output voltage1 LED (green, red and orange) output currentdepth145 mmheight125 mmwidth146 mmproduct weight1.6 kg output connectionSeriesParallelmarkingCEmounting support35 x 7.5 mm symmetrical DIN rail35 x 15 mm symmetrical DIN railoperating positionVerticalpower supplySELV conforming to IEC 60950-1SELV conforming to IEC 60204-1SELV conforming to IEC 60364-4-41 dielectric resistance2500 V with between input and ground insulation3000 V with between input and output insulation500 V with between output and ground insulation

Read more less

Schneider-Electric Standard dual Ethernet communicator  STBNIP2311 The product is part of the Modicon STB modular distributed I/O range. The standard network interface module has 1 main segment and up to 6 extension segments. It is an interface module with a nominal supply voltage of 24V DC, a maximum supply current of 700 A, an output voltage of 5.25V DC and an output current of 1.2 A. General information:Modicon STB Distributed I/O SolutionProduct typeStandard Network Interface ModuleIntegrated connection typeModbus Ethernet TCP/IP compliant with IEEE 802.3 2 RJ45 female double shielded twisted pair via Ethernet (network)Modbus Ethernet TCP/IP compliant with IEEE 802.3 HE-13 (RS232 port)IEEE 802.3 compliant Modbus Ethernet TCP/IP female 8-way (RS232 port) Ethernet port10BASE-T/100BASE-Texchange modeHalf duplex or full duplexnumber of segments1 main and max 6 extensionstransmission speed10/100 Mbit/s for bus length of 0…100 m per segment Type of structureIndustrial LANEthernet Modbus TCP/IP network Technical featuresNumber of addressable I/O modules0…32 per islandcommunication serviceSNMP agentBootP/DHCP protocolModbus TCP/IP MessagingEmbedded Web (configuration, diagnostics and variable access)Rated supply voltage [Us]24V DC Power supply typeSELVmaximum current supplied700 APower supply voltage limits19.2…30Vinput current550 mA for power circuitRated output current0.575 A at 60…70 °C1.2 Aoutput voltage5.25 V DC (tolerance: +/-0.21%) for logic busCE markingOvervoltage category IIStatus LED1 LED ACT1 Island status LED (RUN)1 Module error LED (ERR)1 LED MS1 NS LED1 Power LED (PWR)1 LED test mode (TEST)depth70 mmheight40.5mmlength130mmProduct weight0.145 kg

Read more less

Schneider electric ATV12 speed variator - 0.37 kW - 0.55 HP - 200-240 V 1ph - c/diss.term. ATV12H037M2 The Schneider Electric Altivar 12 variable speed drive is capable of powering single-phase asynchronous motors with rated power up to 0.37 kilowatts/0.55 horsepower and rated voltage from 200 to 240 Vac. This variable speed/frequency drive (VSD / VFD) is designed for simple industrial and commercial machines and appliances, such as conveyor belts, pumps, extractors, access barriers and rolling mills. Its small footprint allows simple non-industrial equipment to be mounted in cabinets. It can be set up first while still inside its packaging without using the power supply, minimizing setup time. SoMove software compatibility saves and transfers configurations to spare, reducing maintenance downtime. Technical characteristicsNumber of digital inputs: 4Number of digital outputs: 2Number of analogue inputs: 1Number of analogue outputs: 1Number Relay Output: 1Interface: 2 RS 485 cablesConnector Type: 1 RJ45Continuous Output Current: 2.4A at 4kHzAccess Method: Serial Modbus Server Speed ​​Variator Output Frequency: 0.5…400 HzSpeed ​​Range: 1…20Sampling Duration: 20 ms, tolerance +/- 1 ms for logic input10 ms for analog inputLinearity Error: +/-0.3% of maximum value for analog input

Read more less

SCHNEIDER ELECTRIC Regulated switching power supply - Three phase - 400 V AC - 24 V - 20 A ABL8WPS24200 Universal stabilized switching power supply, intended for powering, in 24 V DC, the auxiliary circuits of automation systems. Compact, and with switching technology, it guarantees a high degree of stability of the output voltage and represents the ideal complement for the Modicon M340, Premium and Quantum ranges. Additional functional modules can be associated in order to guarantee continuity of service and at the same time be able to discriminate the protection of the powered systems. It guarantees an output voltage equal to the nominal value of 24 V DC ±3%, regardless of the load (from empty to full load) and for any mains supply. Compliant with IEC standards and UL, CSA and TUV approved, it is suitable for universal use. It has protections that ensure optimal operation of the control and automation system. The protection operating mode can be configured according to your specific application needs: • Manual reset protection mode: following a defect that involves a current absorption higher than the nominal value, priority will be given to the output voltage: the power supply will stop completely before the voltage supplied can drop below 21 V DC. In this way, unwanted variations in the logical states of the PLC and powered actuators will be avoided. • Automatic reset protection mode: priority is given to the current to allow, for example, fault finding, or to guarantee continuity of service until the arrival of maintenance workers. When the defect appears, the nominal current continues to be supplied but at a voltage significantly lower than the nominal one of 24 V DC. When the fault disappears the voltage returns to its nominal value. Phaseo Universal power supplies also have a power reserve that allows them to supply a current of 1.5 In at regular intervals; in this way it is possible to avoid oversizing the power supply if devices characterized by high inrush currents must be powered. The diagnostic function of Phaseo Universal power supplies is shown on the front of the product via signaling LEDs (Uout and Iout) and via a potential-free relay contact which allows remote control. All Phaseo Universal power supplies are equipped with a potentiometer for regulating the output voltage to compensate for voltage drops along long cables. Click for a 360 degree view of SCHNEIDER ELECTRIC ABL8WPS24200

Read more less

SCHNEIDER ELECTRIC XPSMCMCP0802 The Schneider Electric XPSMCM safety controller CPU is powered by 24 VDC, has 8 digital inputs, 2 interlock inputs for start/restart, 2 output OSSD pairs, 4 test outputs and 2 status outputs and stud terminals. This configurable safety controller complies with the requirements of PL e/Category 4 according to EN/ISO 13849-1 and SILCL3 according to EN/IEC 62061. It is an appropriate solution for machines with a limited number of safety functions that require configuration flexibility of a safety controller. It can be used as a standalone or with fourteen expansion modules: the system is expandable up to 128 inputs, 16 outputs and up to 32 diagnostic status outputs, ideal for machines that require monitoring of multiple safety functions. Click for large 360 ​​view of SCHNEIDER ELECTRIC XPSMCMCP0802

Read more less

SCHNEIDER ELECTRIC MODULE 8 ANALOGUE INPUTS ISOL. RTU BMXAMI0810 The high resolution analog input module is part of the Modicon X80 modules. It has 8 isolated analog inputs (15 bits + sign). This module is connected via a 28-way removable terminal block. The module offers different voltage or current ranges for each of the inputs, depending on the configuration you choose. It occupies a single slot in the rack and has an enclosure that provides 20 protection to the electronics.

Read more less

SCHNEIDER ELECTRIC 7"W TOUCH PANEL DISPLAY  HMIST6400 This Basic HMI belongs to the Harmony ST6 range of Schneider Electric. The single touch resistive HMI is made with an aluminum front panel with a multi-colored status indicator that shows the various modes of operation. This HMI has a size of 7 inches with 16 million colors and a resolution of 800 x 480 pixels (WVGA). It is configurable using EcoStruxure Operator Terminal Expert software for an intuitive user experience. It has an 800 MHz ARM Cortex-A8 CPU, 1 GB device memory, 128 MB user data memory and 512 KB backup memory. This ST6 HMI integrates 2 Ethernet ports, COM1 (RS-232C), COM2 (RS-485), 1 USB2.0 Type A and 1 USB 2.0 Micro-B port. Dimensions: 208mm (width) x 153mm (height) x 45mm (depth); weight: 0.80 Kg. It is designed for use in industries such as packaging, food and beverage, textiles, HVAC equipment and compressors, and also for end users who need to maintain their web devices. It complies with EN standards (61000-6-4, 61000-6-2, 61131-2), UL 61010-2-201, CSA C22.2 No 61010-2-201 and is CSA, CE, China RoHS, KC, REACH certified. The range is designed to meet the needs of simple machine operators by offering good visualization, connectivity, end-to-end cybersecurity thanks to EcoStruxure Secure Connect Advisor and competitive costs. The range ensures different degrees of protection: IP65F, type 1, type 4X (for internal use only), type 13 (on the front panel, if correctly installed in a cabinet). Click for large 360 ​​view of SCHNEIDER ELECTRIC HMIST6400

Read more less