SCHNEIDER ELECTRIC Regulated switching power supply - Three phase - 400 V AC - 24 V - 20 A ABL8WPS24200 Universal stabilized switching power supply, intended for powering, in 24 V DC, the auxiliary circuits of automation systems. Compact, and with switching technology, it guarantees a high degree of stability of the output voltage and represents the ideal complement for the Modicon M340, Premium and Quantum ranges. Additional functional modules can be associated in order to guarantee continuity of service and at the same time be able to discriminate the protection of the powered systems. It guarantees an output voltage equal to the nominal value of 24 V DC ±3%, regardless of the load (from empty to full load) and for any mains supply. Compliant with IEC standards and UL, CSA and TUV approved, it is suitable for universal use. It has protections that ensure optimal operation of the control and automation system. The protection operating mode can be configured according to your specific application needs: • Manual reset protection mode: following a defect that involves a current absorption higher than the nominal value, priority will be given to the output voltage: the power supply will stop completely before the voltage supplied can drop below 21 V DC. In this way, unwanted variations in the logical states of the PLC and powered actuators will be avoided. • Automatic reset protection mode: priority is given to the current to allow, for example, fault finding, or to guarantee continuity of service until the arrival of maintenance workers. When the defect appears, the nominal current continues to be supplied but at a voltage significantly lower than the nominal one of 24 V DC. When the fault disappears the voltage returns to its nominal value. Phaseo Universal power supplies also have a power reserve that allows them to supply a current of 1.5 In at regular intervals; in this way it is possible to avoid oversizing the power supply if devices characterized by high inrush currents must be powered. The diagnostic function of Phaseo Universal power supplies is shown on the front of the product via signaling LEDs (Uout and Iout) and via a potential-free relay contact which allows remote control. All Phaseo Universal power supplies are equipped with a potentiometer for regulating the output voltage to compensate for voltage drops along long cables. Click for a 360 degree view of SCHNEIDER ELECTRIC ABL8WPS24200

Read more less

SCHNEIDER ELECTRIC XPSMCMCP0802 The Schneider Electric XPSMCM safety controller CPU is powered by 24 VDC, has 8 digital inputs, 2 interlock inputs for start/restart, 2 output OSSD pairs, 4 test outputs and 2 status outputs and stud terminals. This configurable safety controller complies with the requirements of PL e/Category 4 according to EN/ISO 13849-1 and SILCL3 according to EN/IEC 62061. It is an appropriate solution for machines with a limited number of safety functions that require configuration flexibility of a safety controller. It can be used as a standalone or with fourteen expansion modules: the system is expandable up to 128 inputs, 16 outputs and up to 32 diagnostic status outputs, ideal for machines that require monitoring of multiple safety functions. Click for large 360 ​​view of SCHNEIDER ELECTRIC XPSMCMCP0802

Read more less

SCHNEIDER ELECTRIC MODULE 8 ANALOGUE INPUTS ISOL. RTU BMXAMI0810 The high resolution analog input module is part of the Modicon X80 modules. It has 8 isolated analog inputs (15 bits + sign). This module is connected via a 28-way removable terminal block. The module offers different voltage or current ranges for each of the inputs, depending on the configuration you choose. It occupies a single slot in the rack and has an enclosure that provides 20 protection to the electronics.

Read more less

SCHNEIDER ELECTRIC 7"W TOUCH PANEL DISPLAY  HMIST6400 This Basic HMI belongs to the Harmony ST6 range of Schneider Electric. The single touch resistive HMI is made with an aluminum front panel with a multi-colored status indicator that shows the various modes of operation. This HMI has a size of 7 inches with 16 million colors and a resolution of 800 x 480 pixels (WVGA). It is configurable using EcoStruxure Operator Terminal Expert software for an intuitive user experience. It has an 800 MHz ARM Cortex-A8 CPU, 1 GB device memory, 128 MB user data memory and 512 KB backup memory. This ST6 HMI integrates 2 Ethernet ports, COM1 (RS-232C), COM2 (RS-485), 1 USB2.0 Type A and 1 USB 2.0 Micro-B port. Dimensions: 208mm (width) x 153mm (height) x 45mm (depth); weight: 0.80 Kg. It is designed for use in industries such as packaging, food and beverage, textiles, HVAC equipment and compressors, and also for end users who need to maintain their web devices. It complies with EN standards (61000-6-4, 61000-6-2, 61131-2), UL 61010-2-201, CSA C22.2 No 61010-2-201 and is CSA, CE, China RoHS, KC, REACH certified. The range is designed to meet the needs of simple machine operators by offering good visualization, connectivity, end-to-end cybersecurity thanks to EcoStruxure Secure Connect Advisor and competitive costs. The range ensures different degrees of protection: IP65F, type 1, type 4X (for internal use only), type 13 (on the front panel, if correctly installed in a cabinet). Click for large 360 ​​view of SCHNEIDER ELECTRIC HMIST6400

Read more less