MONITORING RELAY FOR SAFETY CIRCUITS

Schneider Electric XPSBAC14APThe XPSAC safety module Schneider Electric controls the emergency stop buttons and limit switches. 24 VAC/DC power supply, has 3 safety circuits, 1 solid state output and captive screw terminal blocks. This safety module meets the requirements of Performance Level PL e/Category 4 according to EN/ISO 13849-1 and SILCL3, in compliance with EN/IEC 61508 and EN/IEC 62061. It can be used to monitor the shutdown circuits of emergency compliant with EN/ISO13850 and EN/IEC 60204-1 standards.

Read more less

Pizzato Elettrica CS AR-22V0243NO+1NC safety module with manual or automatic start, category 3, for emergency stops and limit switch control for mobile guards. Housing in polyamide PA 66, self-extinguishing V0 according to UL 94. Terminals: Screw terminals. Power supply: 24 Vac/dc.

Read more less

Omron G9SE401DC24Safety module, 24 Vdc, 1 or 2 channels, 4NO 5A/250 Vac, 1 auxiliary PNP

Read more less

Pizzato Elettrica CS AR-05V0243NO+1NC safety module with manual or automatic start, category 4, for emergency stops, limit switch control for mobile guards, solid state output circuits (e.g. optical barriers) and magnetic safety sensors. Housing in polyamide PA 66, self-extinguishing V0 according to UL 94. Terminals: Screw terminals. Power supply: 24 Vac/dc.

Read more less

Pizzato Elettrica CS AR-08V0242NO safety module, category 4, for emergency stops, limit switch control for mobile guards, solid state output circuits (e.g. optical barriers) and magnetic sensors safety. Housing in polyamide PA 66, self-extinguishing V0 according to UL 94. Terminals: Screw terminals. Power supply: 24 Vac/dc.

Read more less

Finder 7S1690245420Modular relay with guided contacts Number of contacts: 4NO+2NC Contact material: AgSnO2+Au execution: expansion device with removable terminals: no Electrical connection: spring fitting rail mounting carrier possible: yes Power supply: DC Volt DC: 16.8 to 30 V. with approval according to UL: yes with TÜV approval: no input evaluation: other with start input: no with feedback circuit: yes number of safe contact outputs and non-delayed: 4 with approval for BG BIA: no performance level according to EN ISO 13849-1: level d SIL according to IEC 61508: 2 (A): 6 Degree of protection: IP20

Read more less

Siemens 3SK11111AW20SIRIUS safety device basic device Standard series relay enabling circuits 3 NO contacts plus relay signaling circuit 1 NC Us = AC/DC 110 - 240 V 50 /60 Hz screw terminal SIRIUS 3SK1 safety switchgear for stand-alone safety applications.\nThe Standard 3SK111 basic modules are characterized by their simple and flexible functionality and offer an economical approach to the world of safety devices. They are perfectly suited for safety functions with only a few sensors and a few enabling circuits. These devices have numerous international approvals and are therefore suitable for export for global use.\nThe devices are available as a 24 V variant or with a wide voltage range, relay or static outputs as well as with screw or spring terminals (push -in).\nMultiple accessories such as sealable covers, wall mounting plates or coding pins facilitate the use of the products.\nThe 3SK safety devices replace the proven 3TK28 series.\nSafety is a SIRIUS business.

Read more less

Abb EB 250 8Isoltester-DIG stands out for the superiority and excellence of their construction and functional characteristics. The way they detect the isolation status of the network is based on cutting-edge technology compared to traditional isolation detectors.

Read more less

Pilz PNOZ s4 24VDC 3 n/o 1 n/c 750104 PNOZsigma safety module (standalone), inputs: 1/2-channel wiring without/without short-circuit detection, manual/automatic start, outputs: 3 NO, 1 NC, 1 semiconductor, UB 24 V DC, width : 22.5 mm, removable screw terminals, emergency stop control, movable guards, light barrier. Technical data  Electrical dataPower supply voltage (V) 24 VType of power supply voltage U1 DC Power consumption DC 2.5 WInputsNumber of inputs 2 Semiconductor outputsNo. semiconductor outputs 1 Cat. employment according to EN 60947-1 DC-12 Relay outputsCat. use AC/DC1 Standard EN 60947-4-1 Voltage AC1 cont. safety 240 Corr. max AC1 cont. of safety. 6 Volt. DC1 cont. for sure. 24 Corr. max DC1 safety contact 6 Cat. use AC15/DC13 Standard EN 60947-5-1 Voltage AC15 cont. for sure. 230 Corr. max AC15 safety contact 5 Volt. DC13 cont. for sure. 24 Safety contacts: AC for UL 240 V AC G.U. (same polarity) Relay contact material AgCuNi Additional data relay contacts + 0.2 µm Au

Read more less

Pilz PNOZ s3 24VDC 2 n/o 750103  PNOZsigma safety module (standalone), inputs: 1/2-channel wiring without/without short-circuit detection, manual/automatic start, outputs: 2 NO, 1 semiconductor, UB 24 VDC, width: 17.5 mm, terminal block removable screws, emergency stop control, movable guards, light barrier. Technical data Electrical dataSupply voltage (V): 24 VType of supply voltage U1: DC Power consumption DC: 2.5 W InputsNumber of inputs: 2 Semiconductor outputsN. semiconductor outputs: 1 Cat. employment according to EN 60947-1: DC-12 Relay outputsCat. AC/DC use1 Standard: EN 60947-4-1 Voltage AC1 cont. safety: 240 Corr. max AC1 cont. of safety: 6 Volt. DC1 cont. safety: 24 Corr. max DC1 safety contact: 6 Cat. use AC15/DC13 Standard: EN 60947-5-1 Volt. AC15 cont. safety: 230 Corr. max AC15 safety contact: 5 Volt. DC13 cont. safety contacts: 24 Safety contacts: AC for UL: 240 V AC G.U. (same polarity) Relay contact material: AgCuNi Additional data relay contacts: + 0.2 µm Au  

Read more less

Schneider-Electric safety module UAK 24V M.SCREW XPSUAK12AP The product is part of the XPS Universal security module range. It is designed for monitoring emergency stops, safety, magnetic or proximity switches, PNP and NPN sensors, RFID safety switches, safety barriers and sensitive mats/edges. PresentationProduct rangeHarmony Safety AutomationProduct typeSafety modulesafety module name XPSUAKsafety module applicationMonitored antivalent contactsFor emergency, protection and barrier monitoring4-wire pressure sensor monitoringModule function Emergency stop button with 2 NC contactsSafety monitoring with 1 or 2 limit switchesControl of 2 PNP sensorsMagnetic switch monitoringSafety barrier control RFID safety switch controlSafety barrier monitoring (ESPE)Safety mat controlProximity sensor monitoringMonitoring 1 PNP + 1 NPN sensor Safety levelCan reach PL e/category 4 for NO relay contact conforming to ISO 13849-1Can reach SILCL 3 for NO relay contact conforming to IEC 62061Can reach SIL 3 for NO relay contact conforming to IEC 61508Can reach PL c/category 1 for NC relay contact conforming to ISO 13849-1Can reach SILCL 1 for NC relay contact conforming to IEC 62061Can ' achieve SIL1 for NC relay contact conforming to IEC 61508Reliability data safetyMTTFd > 30 years conforming to ISO 13849-1Dcavg >= 99 % conforming to ISO 13849-1PFHd = 1.13E-09 conforming to ISO 13849-1HFT = 1 conforming to IEC 62061PFHd = 1.13E-09 conforming to IEC 62061SFF > 99% conforming to IEC 62061HFT = 1 conforming to IEC 61508-1PFHd = 1.13E-09 conforming to IEC 61508-1SFF > 99% conforming to IEC 61508-1Type = B conforming to IEC 61508-1topology of the networkNC doublePNP doubleAntivalent double OSSD doubleconnections - terminalsRemovable screw terminal block, 0.2...2.5 mm² solid or flexibleTerminal block removable screw terminal block, 0.25...2.5 mm² flexible with ferrule single conductorRemovable screw terminal block, 0.2...1.5 mm² solid or flexible double conductorRemovable screw terminal block, 2 x 0.25...1 mm² flexible with ferrule without cable end, with maskRemovable screw terminal block, 2 x 0.5...1.5 mm² flexible with ferrule with cable end, with maskVoltage nominal power supply [Us]24 V AC - 15...10 %24 V DC - 20...20 %Technical characteristicssynchronization time between inputs 0.5 s 2 s 4 sType of startingAutomatic/manual/monitoredPower absorbed in W2.0 W 24 V DCPower consumption in VA5.0 VA 24 V AC 50/60 Hztype of input protectionInternal, electronicsafety outputs2 NO + 1 NCsafety inputs2 safety input 24 V DC 5 mAmaximum wire resistance 500 OhmInput compatibilityNormally closed circuit conforming to ISO 14119XC limit switch conforming to ISO 14119Mechanical contact conforming to ISO 14119Normally closed circuit conforming to ISO 13850Double antivalent conforming to ISO 14119Double OSSD conforming to IEC 61496-1-23-wire PNP proximity sensorsRated operational current [Ie]5 A AC-1 for NO relay contact3 A AC-15 for NO relay contact5 A DC-1 for NO relay contact3 A DC-13 for NO relay contact 3 A AC-1 for NC relay contact1 A AC-15 for NC relay contact3 A DC-1 for NC relay contact1 A DC-13 for NC relay contactcontrol outputs 3 configurable on/off pulsed outputinput/output typePulsed semiconductor signaling output. 24 V DC, 20 mA Z1, non-safety relatedConventional thermal current in air [Ith]8 Aassociated fuse rating10 A gG for output circuit NO relay conforming to IEC 60947-1minimum output current10 mA per relay outputminimum output voltage12 V per relay outputRated insulation voltage [Ui]250 V (pollution degree 2) conforming to IEC 60947-1Rated impulse withstand voltage [Uimp]4 kV overvoltage category II conforming to IEC 60947-1Installation35 mm symmetrical DIN raildepth120 mmheight100 mmwidth22.5 mmproduct weight0.200 kg

Read more less

Schneider-Electric Safety module Cat.1 NC/NC  XPSUAB11CP Cat.1 safety module NC/NC, NO/NC free from power. and PNP/PNP 24V screw m. The product is part of the XPS Universal range of security modules. The safety relay is designed for monitoring emergency stops, antivalent contacts, safety, magnetic or proximity switches, PNP sensors, RFID safety switches, safety barriers or two-hand controls. Technical dataProduct rangeHarmony Safety AutomationProduct typeSafety modulename safety moduleXPSUABsafety module applicationFor monitoring 2-hand controlFor application with contacts in switchingFor emergency monitoring, protection and barriersMonitored antivalent contactsModule functionEmergency stop monitoring 1 channelMobile protection monitoring 1 channel 1 PNP sensor monitoringType IIIA two-hand control controlMagnetic switch monitoringSafety barrier controlSafety RFID switch controlSafety barrier monitoring (ESPE)Proximity sensor monitoringSecurity levelCan reach PL c/category 1 compliant with ISO 13849-1Can reach SILCL 1 compliant with IEC 62061Can achieve SIL1 compliant with IEC 61508Safety reliability dataMTTFd >= 30 years compliant with ISO 13849-1Dcavg PFHd = 1177E-09 1/h conforming to ISO 13849-1HFT = 0 conforming to IEC 62061PFHd = 1177E-09 1/h conforming to IEC 62061SFF > 60 % conforming to IEC 62061HFT=0 conforming to IEC 61508-1PFHd = 1177E-09 1/h conforming to IEC 61508-1SFF > 60% conforming to IEC 61508-1 Type = B conforming to IEC 61508-1network topologyDouble NCDouble PNPDouble antivalentDouble OSSD connections - terminalsRemovable screw terminal block, 0.2...2.5 mm² solid or flexibleRemovable screw terminal block, 0.25...2.5 mm² flexible with single conductor ferruleRemovable screw terminal block, 0.2...1.5 mm² solid or flexible double conductorRemovable screw terminal block, 2 x 0.25...1 mm² flexible with ferrule without cable end, with maskRemovable screw terminal block, 2 x 0.5...1.5 mm² flexible with ring nut with cable end, with maskRated supply voltage [Us]24 V AC - 15...10 %24 V DC - 20...20 % synchronization time between inputs0.5 s2.2 sstarting typeAutomatic/manual/monitoredpower absorbed in W1.5 W 24 V DCpower consumption in VA3.5 VA 24 V AC 50/60 Hztype of input protection Internal, electronicsafety outputs1 C/Osafety inputs1 safety input 24 V DC 5 mA maximum wire resistance500 Ohminput compatibilityNormally closed circuit compliant with ISO 14119XC limit switch compliant to ISO 14119Mechanical contact conforming to ISO 14119Normally closed loop conforming to ISO 13850Dual antivalent conforming to ISO 14119Dual OSSD conforming to IEC 61496-1-2Two-controlled hands compliant with EN 574/ISO 13851-III A3-wire PNP proximity sensorsRated operational current [Ie]5 A AC-1 per contact relay NO3 A AC-15 for relay contact NO5 A DC-1 for relay contact NO3 A DC-13 for relay contact NO3 A AC-1 for relay contact NC 1 A AC-15 for NC relay contact2 A DC-1 for NC relay contact1 A DC-13 for NC relay contactControl Outputs 2 configurable on/off pulsed outputinput/output typePulsed semiconductor signaling output. 24V DC, 20mA Z1, non-safety related Conventional thermal current in air [Ith]3 Aassociated fuse rating6 A gG for IEC compliant relay output 60947-1minimum output current10 mA per relay outputminimum output voltage15 V per output relaymaximum input response time20 msRated insulation voltage [Ui]250 V (degree pollution 2) conforming to IEC 60947-1Rated impulse withstand voltage [Uimp]4 kV overvoltage category II conforming to IEC 60947-1local signalingLED (green)Power ON:LED (red)error:LED (yellow)start:LED (yellow)darkness status:LED (yellow)safety input S12:LED (yellow)safety input S13:Installation35 mm symmetrical DIN raildepth120 mmAmbient temperature-25…55 °Cheight 100 mmwidth22.5 mmproduct weight0.200 kg

Read more less

Sentry BSR11 24VDC 2TLA010040R0200 PLC, relays, devices, systems and safety barriers, Security, Sentry safety relay, Sentry BSR11 24VDC, Command, control, electronic and systems products for safety. Technical data Function: Expansion relay - No monitoring of two channel fault Subfunction: Start/test input Timer Relay Type: No Time Delay Rated control supply voltage (Us): 24 V DC Protection degree: IP20 Connection capacity: Crimped Pin 1x0.2...3.3 mm² Crimped Pin 2x0.2...1.5 mm²Flexible with Ferrule 1x0.2...3.3 mm²Flexible with Ferrule 2x0.2...1.5 mm²Solid 1x0.2...3.3 mm² Solid 2x0.2...1.5 mm² Tightening torque: 0.7 N·m Cable stripping length: 6.5 mm Recommended screwdriver: M3.5 DIN rail mounting: TH35-15 (35 x 15 mm Mounting Bar) according to IEC 60715TH35-7.5 (35 x 7.5 mm Mounting Bar) according to IEC 60715 Reference standards: IS0 13849

Read more less

Abb Inca 1 TINA V2 E-STOP 2TLA030054R0010 Panel mount emergency stop button, 22.5mm holes, Tina to DYNlink adaptation, status LED in the button, terminal blocks. Technical dataNominal voltage of 24 V DCcontrol power supply (Us)Nominal voltage of 24 V DC DimensionsProduct depth 75.5 mmProduct height 32.2 mmProduct width 32.2 mmProduct net weight 0.042 kg

Read more less

ABB QSD-DIG 230/24 V SIGNAL PANEL A2CSM257093R1521 > Technical data Rated control supply voltage (Us): 24 V DC Power consumption (@Pcons): AtRatedLoad 1 W Model Number: Basic device Delay time (τ): Release 0...0 second [unit of measurement of time] Mounting Orientation: Vertical Environmental data RoHS Declaration: According to EC Directive 2011/65/EC RoHS information: 9AKK106713A5709 Environmental information: refer to RoHS Information Conflict Minerals Reporting Template (CMRT): 9AKK108468A3363 Dimensions Product width: 78 mm Product height: 0.121 m Product depth: 55 mm Product net weight: 0.2 kg    

Read more less

Abb Sentry SSR32 24VDC 2TLA010052R0400 Sentry SSR32 safety relay with 2NO+2 NO delayed relay outputs, +24 VDC supply voltage and screw terminals.For monitoring safety devices with contacts, 1 or 2 equivalent channels and safety devices safety with OSSD outputs.Manual or automatic reset selectable via switch on the front. The two delayed NO relay outputs have a de-energization delay time of 0.5 seconds. Technical data Function: Safety relay for monitoring of safety devices Subfunction: Start/test input, Manual/Auto reset selectable by switch Timer relay type: OFF-Delay Time range: 0.5 second Rated control supply voltage (Us): 24V DC Degree of protection: IP20 Connection capacity: Crimped Pin 1x0.2...3.3 mm²Crimped Pin 2x0.2...1.5 mm²Flexible with Ferrule 1x0.2...3.3 mm²Flexible with Ferrule 2x0.2. ..1.5 mm²Solid 1x0.2...3.3 mm²Solid 2x0.2...1.5 mm² Tightening torque: 0.7 N·m Cable stripping length: 6.5 mm Recommended screwdriver: M3.5 DIN rail mounting: TH35-15 (35 x 15 mm Mounting Bar) according to IEC 60715TH35-7.5 (35 x 7.5 mm Mounting Bar) according to IEC 60715 Reference standards: IS0 13849 UL/CSA technical department UL/CSA cable sections: Crimped Pin 1x 24-12 AWGCrimped Pin 2x 24-16 AWGFlexible with Ferrule 1x 24-12 AWGFlexible with Ferrule 2x 24-16 AWGSolid 1x 24-12 AWGSolid 2x 24-16 AWG Dimensions Product width: 22.5 mm Product height: 120 mm Product depth: 120 mm Product net weight: 0.207 kg

Read more less

Abb Sentry BSR23 24VDC 2TLA010041R0600 Sentry BSR23 safety expansion relay with 4NO+1NC relay outputs, +24 VDC supply voltage and screw terminals.Used as an expansion relay for a safety relay/safety PLC, in order to increase the number of emergency exits. Sentry safety relays cover various types of safety applications up to PLe / SIL3.The basic models provide reliable supervision of the simplest safety functions, while the universal models offer advanced functionality and high flexibility.Models with display offer preset configurations and detailed information to further simplify troubleshooting.Other variants offer a high-precision timer function of ±1% and an adjustable time setting range from 0 to 999 s. The high output current capacity up to 6A can save the use of an intermediate contactor. Multiple reset allows up to 10 safety relays connected to one illuminated reset button.All models are available with removable push-in or screw terminals. Terminals and coding kit to mark removed terminals are available as accessories. Technical data Function: Expansion relay - must be monitored by another device for higher than PL c Subfunction: Start/test input Timer Relay Type: No Time Delay Rated control supply voltage (Us): 24 V DC Protection degree: IP20 Connection capacity: Crimped Pin 1x0.2...3.3 mm² Crimped Pin 2x0.2...1.5 mm²Flexible with Ferrule 1x0.2...3.3 mm²Flexible with Ferrule 2x0.2...1.5 mm²Solid 1x0.2...3.3 mm² Solid 2x0.2...1.5 mm² Tightening torque: 0.7 N·m Cable stripping length: 6.5 mm Recommended screwdriver: M3.5 DIN rail mounting: TH35-15 (35 x 15 mm Mounting Bar) according to IEC 60715 TH35-7.5 (35 x 7.5 mm Mounting Bar) according to IEC 60715 Reference standards: IS0 13849

Read more less

ABB ISL-A 230 ISOLATION MONITOR  2CSM333000R1500 ISL industrial insulation monitors allow IT networks to continuously monitor the insulation level to identify faults and restore optimal operationof the system. Technical data Rated operating voltage: 220V DC Rated control supply voltage (Us): (DC) 220...220 V Loss of power: a Nominal Operating Conditions for Polo 4 W Model Number: Basic device Delay time (τ): Release 0...0 second [time unit] Provided options: DC network Environmental data RoHS Declaration: According to EC Directive 2011/65/EC RoHS information: 9AKK106713A5707 Environmental information: refer to RoHS Information Conflict Minerals Reporting Template (CMRT): 9AKK108468A3363 Dimensions Product width: 90 mm Product height: 0.105 m Product depth: 58 mm Product net weight: 0.250 kg Ordering Level 1 packaging unit: box 1 piece(s) Level 1 package gross weight: 0.5 kg    

Read more less

Abb ISL-A 24-48 insulation monitor  2CSM111000R1500  ISL industrial insulation monitors allow IT networks to continuously monitor the insulation level to identify faults and restore optimal operationof the system. Technical data Rated operating voltage: 24 ... 48 V AC/DC Rated control supply voltage (Us): (50 Hz) 24...28 V(50 Hz) 24...28 V(60 Hz) 24...28 V(60 Hz) 24... 28 V(DC) 24...28 V(DC) 24...28 V Loss of power: a Nominal Operating Conditions for Polo 4 W Model Number: Basic device Delay time (τ): Release 0...0 second [time unit] Provided options: AC/DC network Dimensions Product width: 85 mm Product height: 0.085 m Product depth: 58 mm Product net weight: 0.090 kg

Read more less

Abb Sentry BSR10P safety relay_push in  2TLA010040R0001 Sentry BSR10P safety relay and expansion relay with 3NO+1NC relay outputs, +24 VDC supply voltage and push-in spring terminals.For monitoring safety devices, such as emergency stops , directly into the relay power circuit.Also suitable as an expansion relay for a safety relay/safety PLC, in order to increase the number of safety outputs.Sentry safety relays cover various types of safety applications up to PLe / SIL3. Basic models provide reliable oversight of the simplest security functions, while universal models offer advanced functionality and high flexibility.Display models offer preset configurations and detailed information to further simplify troubleshooting problems.Other variants offer a high-precision timer function of ±1% and an adjustable time setting range from 0 to 999 s. The high output current capacity up to 6A can save the use of an intermediate contactor. Multiple reset allows up to 10 safety relays connected to one illuminated reset button.All models are available with removable push-in or screw terminals. Terminals and coding kit to mark removed terminals are available as accessories. Technical data Function: Expansion relay - No monitoring of two channel fault Subfunction: Start/test input Timer Relay Type: No Time Delay Rated control supply voltage (Us): 24 V DC Protection degree: IP20 Connection capacity: Crimped Pin 1x0.2...2.5 mm²Crimped Pin 2x0.25...1.5 mm²Flexible with Ferrule 1x0.2...2.5 mm²Flexible with Ferrule 2x0.25...1.5 mm²Solid 1x0.2...2.5 mm²Solid 2x0. 25...1.5 mm² Cable stripping length: 6.5 mm DIN rail mounting: TH35-15 (35 x 15 mm Mounting Bar) according to IEC 60715TH35-7.5 (35 x 7.5 mm Mounting Bar) according to IEC 60715 Reference standards: IS0 13849

Read more less

ABB ISL-A 600 ISOLATION MONITOR  2CSM249853R1500 ISL industrial insulation monitors allow IT networks to continuously monitor the insulation level to identify faults and restore optimal operationof the system. Technical data Rated operating voltage: 400 ... 600 V DC Rated control supply voltage (Us): (DC) 400...600 V Loss of power: a Nominal Operating Conditions for Polo 4 W Model Number: Basic device Delay time (τ): Release 0...0 second [time unit] Provided options: DC network Environmental data RoHS Declaration: According to EC Directive 2011/65/EC RoHS information: 9AKK106713A5707 Environmental information: refer to RoHS Information Conflict Minerals Reporting Template (CMRT): 9AKK108468A3363 Dimensions Product width: 85 mm Product height: 0.105 m Product depth: 58 mm Product net weight: 0.250 kg

Read more less

Abb ISL-A 115 insulation monitor 2CSM222000R1500 ISL industrial insulation monitors allow IT networks to continuously monitor the insulation level to identify faults and restore optimal operationof the system. Technical dataRated voltage of 100 ... 144 V DCoperationRated voltage of (DC) 100...144 Vpower supply control(Us)Power loss at Nominal Operating Conditions for Pole 4 WModel Number Basic deviceDelay time (τ) Release 0...0 second [unit of measurement of time]Options provided DC network DimensionsProduct width 90 mmProduct height 0.105 mProduct depth 58 mmProduct net weight 0.250 kg

Read more less

Abb QSO 3S Premium Operating room panel 2CSM273602R1551 The QSO range of electrical panels for rooms used for medical use constitutes a solution specifically designed to protect the safety and continuity of service of operating rooms. The QSO operating room electrical panels are the ideal solution for distribution within group 2 medical rooms. They are available in four sizes in the CLASSIC versions, which contains the essential equipment for protection against direct contact, and PREMIUM which adds, depending on the type of panel, further emergency devices for powering the operating room circuits, overvoltage protection, rapid cabling system. Technical dataRated control supply voltage (Us): (50 Hz) 230...230 V(60 Hz) 230...230 V Power supply: 3 kV · AModel Number: Basic deviceDelay time (τ): Release 0...0 second [unit of measurement of time]Mounting type: WallOptions provided: 2x10A + 5x16A + 1x25A Environmental data Environmental information: refer to RoHS Information Conflict Minerals Reporting Template (CMRT): 9AKK108468A3363 Dimensions Product width: 700 mm Product height: 1.100 m Product depth: 200 mm Product net weight: 150 kg

Read more less

Abb Sentry TSR20 24VDC 2TLA010061R0000 LC, relays, devices, systems and safety barriers, Security, Sentry safety relay, Sentry TSR20 24VDC, Command, control, electronic and systems products for safety. Technical data Function: Safety relay for monitoring of safety devices Subfunction: Start/test input, Auto reset only, Time delay selectable by switch Timer relay type: OFF-Delay Time range: 0.5 and 1.5 seconds Rated control supply voltage (Us): 24V DC Degree of protection: IP20 Connection capacity: Crimped Pin 1x0.2...3.3 mm²Crimped Pin 2x0.2...1.5 mm²Flexible with Ferrule 1x0.2...3.3 mm²Flexible with Ferrule 2x0.2. ..1.5 mm²Solid 1x0.2...3.3 mm²Solid 2x0.2...1.5 mm² Tightening torque: 0.7 N·m Cable stripping length: 6.5 mm Recommended screwdriver: M3.5 DIN rail mounting: TH35-15 (35 x 15 mm Mounting Bar) according to IEC 60715TH35-7.5 (35 x 7.5 mm Mounting Bar) according to IEC 60715 Reference standards: IS0 13849 UL/CSA technical department UL/CSA cable sections: Crimped Pin 1x 24-12 AWGCrimped Pin 2x 24-16 AWGFlexible with Ferrule 1x 24-12 AWGFlexible with Ferrule 2x 24-16 AWGSolid 1x 24-12 AWGSolid 2x 24-16 AW Dimensions Product width: 22.5 mm Product height: 120 mm Product depth: 120 mm Product net weight: 0.207 kg

Read more less