Description
Siemens simatic ET 200SP HA 6DL11936TP000DH1
SIMATIC ET 200SP HA, terminal block, type H1, 32 push-in terminals, internal comparison temperature load group new, width: 22.5mm.
General information
Product type designation Type H1
Product function
● I&M data Yes; Asset data
Supply voltage
Rated value (DC) 24 V
External protection of power cables Yes; DC 24 V / 10 A (thermal-magnetic switch with tripping characteristic
type B or C, fast-acting equipment protection fuse with sufficient
interrupting capacity, electronic fuse with characteristic corresponding to type B or
C)
Current carrying capacity
up to 70 °C, max. 10A; Permissible load current dependent on the number of terminal blocks
for process terminals, max. 2 A
Hardware configuration
Temperature sensor Yes; For internal cold junction with thermocouple connection
Formation of potential groups
● Support of potential groups Yes
● New potential group Yes
● Potential group continued from left No
Slot
● Slot number 1
Analog inputs
Thermocouple (TC)
Temperature compensation
— Internal temperature compensation Yes
Potential isolation
between backplane bus and supply voltage Yes; DC 4 200 V/1 min, Type Test (with half separation distance
(basic insulation) per requirement ÜK-III of the F/ F=Failsafe technique)
between potential groups (Powerbus) Yes; DC 1 500 V/1 min, Type Test (SELV / PELV for functional earth FE)
between process terminals and supply voltage Yes; DC 1 500 V/1 min, Type Test
Ambient conditions
Ambient temperature in operation
● Horizontal mounting position, min. -40 °C
● Horizontal mounting position, max. 70 °C
● Vertical mounting position, min. -40 °C
● Vertical mounting position, max. 60 °C
Dimensions
Width 22.5 mm
Height 175 mm
Depth 77 mm
