Siemens 6ES79538LG310AA0SIMATIC S7, Micro Memory card for S7-300/C7/ET 200, 3, 3V Nflash, 128 kbyte The necessary memories are offered for SIMATIC S7-300 in different sizes.

Read more less

Siemens 6ES73211BH020AA0SIMATIC S7-300, digital input module SM 321, electrically isolated, 16 DE, 24V DC, 1 x 20-pole

Read more less

Siemens 6AG12231BH322XB0SIPLUS S7-1200 SM 1223 8DI/8DQ -25 ... +70 °C, with Conformal Coating based on 6ES7223-1BH32-0XB0 . SM 1223 digital input and output module, 8 DI/8 DO, 8 DI DC 24 V, Sink/Source 8 DO, transistor 0.5 A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs. Like the CPU, the digital input and output modules are also protected against extreme environmental conditions. Thanks to 100% Conformal Coating they resist biologically, chemically and mechanically active substances, condensation, frost and harmful gases. Digital signals are reliably acquired under all conditions.

Read more less

Siemens 3RB30161SB0overload relay 3...12 A electronic for motor protection frame size S00, CLASS 10E mounting on contactor main circuit: screw auxiliary circuit: screw manual-automatic reset relay SIRIUS 3RB3 electronic overload device for current-dependent protection of loads with normal and heavy starting against excessive overheating caused by overload, phase asymmetry or phase failure.\nThanks to the wide current adjustment ranges and the various tripping characteristics, already few types of devices can satisfy the needs of entire engine series. Their low power dissipation leads to high energy efficiency and low heating in the control cabinet. International approvals (e.g. IEC and UL/CSA) and versions for applications in areas at risk of explosion (ATEX) are obviously available.\nCan be supplied with different adjustment ranges of the overload release and with different tripping classes. They are available with screw or spring-loaded terminals for quick, maintenance-free and vibration-resistant connection as well as for separate mounting.\nThe accessories are uniformly suitable for all frame sizes from S00 to S3.\nSimple, efficient, always up-to-date - the SIRIUS. modular system

Read more less

Siemens 6SL32203YE120AF0SINAMICS G120X rated power: 1.1 kW with 110% 60 s, 100% 240 s radio interference filter for category C2 3AC 380-480 V+10/-20% 47- 63 Hz ambient temperature -20 ... +45 °C frame size: FSA degree of protection IP20 / UL open type 3C2 paint finish with Intelligent Operator Panel without expansion IO integrated fieldbus: PROFINET PN, Ethernet IP SINAMICS G120X frequency converters Domina elements for pump/fan applications, water/wastewater and building engineering/HVAC. SINAMICS G120X convinces with simple selection and ordering, easy handling, immediate availability out of the box and optimized integration into applications. Simple setup with SINAMICS G120 Smart Access Module or IOP-2 operator panel. SINAMICS G120X is stable in all network conditions, optionally satisfies EMC categories C2 and C1 and is particularly robust thanks to the ability to operate at temperatures between -20 °C and +60 °C. Sector-specific functions such as bypass or pipe filling make this converter particularly efficient. All devices in the construction series are homogeneous and compatible with all voltages and all types of networks, as well as being designed according to the same principles of cost optimization and resource saving. Their compact design saves space in the control cabinet. SINAMICS G120X is available in nine sizes in the power range from 0.75 kW to 630 kW. The SINAMICS G120X frequency converter can be easily commissioned in various ways, e.g. with an external Basic Operator Panel (BOP-2), a Smart Access Module (SAM) or the Intelligent Operator Panel (IOP-2). SINAMICS - the drive for me.

Read more less

Siemens 3RA29233EA1Bottom wiring module for combination of contactors size S0 without distance between contactors, screw terminals Simple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 6ES74070KA020AA0SIMATIC S7-400, power supply PS407: 10A, wide range, UC 120/230 V, DC 5V/10A

Read more less

Siemens 6SL32203YE220AF0SINAMICS G120X rated power: 5.5 kW with 110 % 60 s, 100 % 240 s radio interference filter for category C2 3AC 380-480 V+10/-20% 47- 63 Hz ambient temperature -20 ... +45 °C frame size: FSB degree of protection IP20 / UL open type 3C2 paint finish with Intelligent Operator Panel without expansion IO integrated fieldbus: PROFINET PN, Ethernet IP SINAMICS G120X frequency inverters Domina elements for pump/fan applications, water/wastewater and building engineering/HVAC. SINAMICS G120X convinces with simple selection and ordering, easy handling, immediate availability out of the box and optimized integration into applications. Simple setup with SINAMICS G120 Smart Access Module or IOP-2 operator panel. SINAMICS G120X is stable in all network conditions, optionally satisfies EMC categories C2 and C1 and is particularly robust thanks to the ability to operate at temperatures between -20 °C and +60 °C. Sector-specific functions such as bypass or pipe filling make this converter particularly efficient. All devices in the construction series are homogeneous and compatible with all voltages and all types of networks, as well as being designed according to the same principles of cost optimization and resource saving. Their compact design saves space in the control cabinet. SINAMICS G120X is available in nine sizes in the power range from 0.75 kW to 630 kW. The SINAMICS G120X frequency converter can be easily commissioned in various ways, e.g. with an external Basic Operator Panel (BOP-2), a Smart Access Module (SAM) or the Intelligent Operator Panel (IOP-2). SINAMICS - the drive for me.

Read more less

Siemens 6ES71942MH500AA0bus cable for ET-Connection M8, PUR cable, packaged on both sides with 2x M8 connectors, 4-pin, shielded, length 5.0m SIMATIC ET 200 AL is an IO system in block construction with a high degree of protection IP65/67, a particularly compact design as well as small space requirements and weight. It is especially designed for distributed control electronics in confined spaces as well as in motion and is configured and commissioned quickly and conveniently via the TIA Portal. Standard modules can be deactivated for safety-oriented groups. The I/O modules represent the interface of the SIMATIC ET 200AL to the process. The accessories available for the ET 200AL range from connectors and connecting cables (pre-assembled) to the bus and power supply through the identification plates up to the tool for quickly stripping the bus cable. Accessories for SIMATIC ET 200AL

Read more less

Siemens 6AV21283QB060AX1SIMATIC HMI MTP1500, Unified Comfort Panel, touch operation, 15.6 TFT widescreen display, 16 million colours, PROFINET interface, configurable from WinCC Unified Comfort V16, includes the Open Source software which is provided free of charge, see the attached DVD SIMATIC HMI Unified Comfort Panels allow you to create innovative control solutions based on the new visualization software SIMATIC WinCC Unified. All devices, in sizes from 7 to 22 inches, are equipped with the same number of interfaces and maximum operating comfort thanks to modern Multi-Touch technology. Furthermore, the new hardware offers significantly more display power. The limiting capacities of the system have been at least doubled, if not even tripled. This allows you to create applications of significantly larger dimensions than those created so far on a Panel system. The functionality of the equipment can be easily expanded, according to your needs, thanks to the integrated Edge functionality. To ensure the IT security of the equipment, Siemens has chosen a proprietary operating system and allows the user to disable unwanted functions or interfaces. Each Unified Comfort Panel is available in two design variants. Standard design: with Siemens and SIMATIC HMI branding as well as silver aluminum frame. Neutral design: without brands and with black aluminum frame.

Read more less

Siemens 6ES73071BA010AA0SIMATIC S7-300 regulated power supply PS307 input: AC 120/230 V output: DC 24 V/2 A The single-phase load power supply SIMATIC PS307 (power supplies system and load) with automatic switching of the input voltage range is perfectly matched to the SIMATIC S7-300 controller in terms of design and functionality. Via the connecting comb, included in the scope of delivery with the system and load power supply, the power supply to the CPU is quickly achieved. Furthermore, it is possible to supply 24 V to other components of the S7-300 system, the input/output circuits of the I/O modules and possibly sensors and actuators. Numerous certifications such as UL, ATEX or GL enable universal use. Regardless of the industry and requirements, Siemens offers reliable and efficient power supplies for every installation.

Read more less

Siemens 6SL32203YE180AF0SINAMICS G120X rated power: 3 kW with 110 % 60 s, 100 % 240 s radio interference filter for category C2 3AC 380-480 V+10/-20% 47-63 Hz Ambient temperature -20 ... +45 °C Frame size: FSA Degree of protection IP20 / UL Open Type Paint finish 3C2 with Intelligent Operator Panel without expansion Integrated IO fieldbus: PROFINET PN, Ethernet IP SINAMICS G120X frequency inverters Master the elements for pump/fan applications, water/wastewater and building engineering/HVAC. SINAMICS G120X convinces with simple selection and ordering, easy handling, immediate availability out of the box and optimized integration into applications. Simple setup with SINAMICS G120 Smart Access Module or IOP-2 operator panel. SINAMICS G120X is stable in all network conditions, optionally satisfies EMC categories C2 and C1 and is particularly robust thanks to the ability to operate at temperatures between -20 °C and +60 °C. Sector-specific functions such as bypass or pipe filling make this converter particularly efficient. All devices in the construction series are homogeneous and compatible with all voltages and all types of networks, as well as being designed according to the same principles of cost optimization and resource saving. Their compact design saves space in the control cabinet. SINAMICS G120X is available in nine sizes in the power range from 0.75 kW to 630 kW. The SINAMICS G120X frequency converter can be easily commissioned in various ways, e.g. with an external Basic Operator Panel (BOP-2), a Smart Access Module (SAM) or the Intelligent Operator Panel (IOP-2). SINAMICS - the drive for me.

Read more less

Siemens 6SL32105BB230UV1SINAMICS V20 1AC 200-240V -15/+10% 47-63Hz Nominal power 3kW with 150% overload. x 60 sec without filter I/O interface: 4DI, 2DO, 2AI, 1AO fieldbus:USS/MODBUS RTU c. Integrated BOP Degree of protection IP20/UL Open Typ size: FSB 140x160x165 (WxHxD)

Read more less

Siemens 3RH21221BF40auxiliary contactor, 2 NO+2 NC, DC 110 V, size S00, screw terminal SIRIUS 3RH2 auxiliary contactor for switching control signals in the control circuit.\ nThe SIRIUS 3RH2 contactor relays feature standard-compliant terminal designations and fast, reliable connection technology. Thanks to the multiplication of the outputs, simultaneous switching of multiple auxiliary circuits is possible. All contacts can be supplied with forced guidance for safety applications also as an SUVA variant. The auxiliary contactors are tropicalised, have high contact safety and are suitable for use worldwide thanks to the corresponding approvals (e.g. IEC and UL/CSA).\nThey can be supplied with AC or DC control and are available with screw or spring terminals. The basic design of the contactor auxiliaries is 4-pole and can be expanded to 8-pole with snap-in auxiliary contact blocks.\nThe numerous accessories for the 3RT2 contactors in frame sizes S00 to S3 can also be used for the contactors 3RH2 auxiliary contactors.\nThe 3RH2 auxiliary contactors replace the proven 3RH1 series.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 6ES79230BC500CB0unshielded connection cable for SIMATIC S7-300/1500 between connector module and connection module 16x0.14 mm2 with IDC connectors, length = 2.5 m The cable 16-pole round (unshielded) with a length of 2.5 m is the connecting element between the front connector module and the connection module. This pre-assembled cable enables a noise-free and safe signal flow. This makes even complex installations transparent and can be checked in a very short time, which makes maintenance and expansions particularly easy. This pre-assembled connection cable is an integral part of the fully modular connection of SIMATIC TOP connect for faster and safer system cabling. In addition to a reduced cabling effort, a significant reduction in error sources is possible. The sensors and actuators of the I/O are fed to the connection modules of SIMATIC TOP connect and from these, via connection cable and front connector module, connected to the SIMATIC S7-1500.

Read more less

Siemens 6ES71376CA000BU0SIMATIC ET 200SP, CM 1 x DALI, DALI master module, integrated DALI bus 160 mA power supply, up to 64 operating devices, 63 control devices, color coded CC20, suitable for BU type U0 SIMATIC ET 200SP is a scalable and highly flexible distributed I/O system. Thanks to its small overall dimensions it is particularly suitable for installation in small distribution boxes at machine level. The modules can be plugged directly into an ET 200SP CPU or connected via PROFINET or PROFIBUS to a central controller. SIMATIC ET 200SP can be expanded with up to 64 I/O modules, which can be inserted in any combination. The system offers a very wide range of units. Many modules are also available with different performance levels, which greatly improves scalability regarding functionality and price. In addition to modules with standard functionality (ST), modules with an expanded function set and diagnostics (HF High Feature / HS High Speed) are also available. For price-sensitive applications, basic functionality (BA) modules are available. The advantage of the ET 200SP system is its ease of use, e.g. thanks to the free choice of connection technology to PROFINET via the BusAdapter, tool-free cabling with push-in technology, improved accessibility of the cabling with the new arrangement of the spring openers next to the respective cable openings and specific diagnostic functions of channel. The possibility of replacing modules and terminal boxes during operation, the so-called Hot Swapping, ensures the availability and productivity of the machine. Communication module for bus lighting control according to DALI standard

Read more less

Siemens 6SL32202YE160AB0SINAMICS G120X rated power: 2.2 kW with 110 % 60 s, 100 % 240 s radio interference filter for category C2 3AC 380-480 V+10/-20% 47- 63 Hz ambient temperature -20 ... +45 °C size: FSA degree of protection IP20 / UL open Type 3C2 paint finish with Basic Operator Panel without expansion IO integrated fieldbus: MODBUS RTU, BACnet MS/TP,USS Converters frequency SINAMICS G120X Dominates elements for pump/fan applications, water/wastewater and building engineering/HVAC. SINAMICS G120X convinces with simple selection and ordering, easy handling, immediate availability out of the box and optimized integration into applications. Simple setup with SINAMICS G120 Smart Access Module or IOP-2 operator panel. SINAMICS G120X is stable in all network conditions, optionally satisfies EMC categories C2 and C1 and is particularly robust thanks to the ability to operate at temperatures between -20 °C and +60 °C. Sector-specific functions such as bypass or pipe filling make this converter particularly efficient. All devices in the construction series are homogeneous and compatible with all voltages and all types of networks, as well as being designed according to the same principles of cost optimization and resource saving. Their compact design saves space in the control cabinet. SINAMICS G120X is available in nine sizes in the power range from 0.75 kW to 630 kW. The SINAMICS G120X frequency converter can be easily commissioned in various ways, e.g. with an external Basic Operator Panel (BOP-2), a Smart Access Module (SAM) or the Intelligent Operator Panel (IOP-2). SINAMICS - the drive for me.

Read more less

Siemens 3RT19664BA313-pole parallel connection element, with hole for 3RT1.6 and 3RT1.7 Simple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 6ES79601AA045AA0SIMATIC S7-400H, FO patch cable 1m for synchronization module Accessories for SIMATIC S7-400H

Read more less

Siemens 6ES76587BA002YB0SIMATIC Logon, Remote Access software for 3 clients, (WinCC flexible AB 2007 or WinCC TIA Portal), Single License for 1 E-SW installation, without SW, without documentation License Key on USB stick, class A, reference HW: PC/PG

Read more less

Siemens 6SL32101PE233AL0SINAMICS Power Module PM240-2 with filter Class A with integrated brake chopper 3AC 380 ... 480 V +10/-10 % 47 ... 63 Hz high overload power: 11kW at 200% 3s, 150% 57S, 100% 240S ambient temperature -10 ... +50 °C reduced overload power: 15kW at 150% 3 s, 110% 57 s, 100% 240 s ambient temperature -10 .. . +40 °C 355x 140x 165 (HxWxD), FSC protection class IP20 without Control Unit and control panel released by CU, firmware version V4.6 SINAMICS Power Module PM240-2 - The ideal Power Module for standard applications in Machine building for the SINAMICS G120 modular frequency converter. As part of the SINAMICS G120 frequency converter (consisting of power section, control unit, operator panel), the PM240-2 Power Modules (degree of protection IP20) have a braking chopper (four-quadrant applications) and are particularly suitable for numerous applications in general machine building.\nThe PM240-2 power unit can be easily combined with different Control Units depending on the type of application and safety requirements (e.g. STO, SS1, SBC , SLS, SDI, SSM). Together with the CU230-2, CU240x-2 and CU250S-2 Control Units, this results in a fully operational SINAMICS G120 frequency converter. The PM240-2 with IP20 protection rating is a built-in device for electrical cabinets with powers from 0.55 kW to 250 kW and three voltage variants 200 V, 400 V and 690 V. The Power Modules are available without filter or with integrated Class A mains filter and in seven frame sizes, from FSA to FSG. To evacuate the dissipated heat from the control panel, the power section is also available as a Push-Through variant. The frame sizes also offer Safety Integrated functionality. Thanks to the robust design, cable lengths of up to 450 m can be achieved (frame size FSF/FSG). For EMC-compliant wiring, shield plates and connection kits can be used. SINAMICS - the drive for me.

Read more less

Siemens 3RH29111HA10auxiliary switch block on the front, 1 NO power path 1 NO for 3RH2 and 3RT2 screw terminal .3/.4 SIRIUS 3RH29 auxiliary contact for contact expansion auxiliary switches in the control circuit.\nThe 3RH29 front auxiliary switch blocks can be mounted without tools regardless of the frame size on the 3RT2 contactors and 3RH2 contactor relays.\nThe 3RH19/3RH29 auxiliary switch blocks are available as variants for front mounting or lateral, with up to four NO contacts with instantaneous switching or up to two early NO and NC contacts. The auxiliary switch blocks can be designed with force-guided contact elements in 3RH auxiliary contactors or also as mirror contacts in 3RT power contactors. They are always available with screw terminals and spring terminals.\nSimple, efficient, always up-to-date - the SIRIUS modular system.

Read more less

Siemens 6SL32101PE118AL1SINAMICS Power Module PM240-2 with filter Class A with integrated brake chopper 3AC 380 ... 480 V +10/-10 % 47 ... 63 Hz high overload power: 0.37kW at 200% 3s, 150% 57S, 100% 240S ambient temperature -10 ... +50 °C low overload power: 0.55kW at 150% 3 s, 110% 57 s, 100% 240 s ambient temperature -10 ... +40 °C 196x 73x 165 (HxWxD), FSA Degree of protection IP20 without Control Unit and control panel approved by CU Firmware version V4.6 Power Module SINAMICS Power Module PM240-2- The ideal Power Module for standard applications in machine building for the SINAMICS G120 modular frequency converter. As part of the SINAMICS G120 frequency converter (consisting of power section, control unit, operator panel), the PM240-2 Power Modules (degree of protection IP20) have a braking chopper (four-quadrant applications) and are particularly suitable for numerous applications in general machine building.\nThe PM240-2 power unit can be easily combined with different control units (Control Units) depending on the type of application and safety requirements (e.g. STO, SS1, SBC, SLS, SDI, SSM). Together with the CU230-2, CU240x-2 and CU250S-2 Control Units, this results in a fully operational SINAMICS G120 frequency converter. The PM240-2 with IP20 protection rating is a built-in device for electrical cabinets with powers from 0.55 kW to 250 kW and three voltage variants 200 V, 400 V and 690 V. The Power Modules are available without filter or with integrated Class A mains filter and in seven frame sizes, from FSA to FSG. To evacuate the dissipated heat from the control panel, the power section is also available as a Push-Through variant. The frame sizes also offer Safety Integrated functionality. Thanks to the robust design, cable lengths of up to 450 m can be achieved (frame size FSF/FSG). For EMC-compliant wiring, shield plates and connection kits can be used. SINAMICS - the drive for me.

Read more less

Siemens 6ES73325HF000AB0SIMATIC S7-300, analog output module SM 332, electrically isolated, 8 AO, diagnostic U/I resolution 11/12 bit, 40-pin, extraction and insertion possible with active backplane bus

Read more less