SIEMENS INDUSTRIAL AUTOMATION

SIEMENS SIMATIC S7-1500F 6ES75173FP000AB0 SIMATIC S7-1500F, CPU 1517F-3 PN/DP, central processing unit with 3MByte work memory for the program and 8MByte for the data, 1st interface: PROFINET IRT with 2 Port Switch, 2nd interface: PROFINET RT, 3rd interface: PROFIBUS, 2 ns bit performance, SIMATIC Memory Card required. General information: Product type designation CPU 1517F-3PN/DPHardware version FS10Firmware version V3.0● FW update possible Yes Product function● I&M data Yes; I&M0 ... I&M3● Isochronous operation Yes; Decentrally and centrally; with min. OB 6 x cycle of 250 μs(decentrally) and 1 ms (centrally) Engineering with● STEP 7 TIA Portal configurable/integrated starting fromversion V18 (FW V3.0); from V13 Update 3 (FW V1.6) Configuration controlvia data set Yes DisplayScreen diagonal [cm] 6.1 cm Control elementsNumber of keys 6Operating mode selector 1 Supply voltageRated value (DC) 24 VPermissible range, lower limit (DC) 19.2 VPermissible range, limit upper (DC) 28.8 VReverse polarity protection Yes Mains and voltage failure buffering● Mains/voltage failure buffering time 5 ms● Repetition rate, min. 1/s Input currentCurrent consumption (nominal value) 1.55 AInrush current, max. 1.9A; Nominal value I²t 0.02 A²·s PowerPower supply in the backplane bus 12 WPower absorbed by the backplane bus (balanced) 30 W Power dissipationPower dissipation, typ. 24 W MemoryNumber of slots for SIMATIC Memory Card 1SIMATIC Memory Card required Yes

Read more less

SIEMENS SIMATIC S7-1200, CPU 1214C 6ES72141HG400XB0 SIMATIC S7-1200, CPU 1214C, compact CPU, DC/DC/relay, onboard I/O: 14 DI DC 24 V; 10 DO relay 2A; 2 AI 0...10V DC, power supply: DC DC 20.4...28.8V, program memory / data memory 150 KB General information: Product type designation CPU 1214C DC/DC/relayFirmware version V4.6 Engineering with● Programming package from STEP 7 V18 Supply voltageRated value (DC)● DC 24 V YesPermissible range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Load voltage L+● Rated value (DC) 24 V● Permissible range, lower limit (DC) 20.4 V● Allowable range, upper limit (DC) 28.8 V Input currentCurrent consumption (nominal value) 500 mA; CPU onlyCurrent consumption, max. 1 500 mA; CPU with all expansion modulesInrush current, max. 12A; at 28.8 V I²t 0.8 A²·s Output currentfor backplane bus (DC 5 V), max. 1 600 mA; max. DC 5 V for SM and CM Transducer power supply24 V transducer power supply● 24 V L+ minus 4 V DC min. Power dissipationPower dissipation, typ. 12 W MemoryWork memory● integrated 150 KBLoad memory● integrated 4 MB● insertable (SIMATIC Memory Card), max. with SIMATIC Memory Card Infill collision● present Yes● maintenance-free Yes● without battery Yes CPU processing timesfor bit operations, typ. 0.08 μs; / instruction

Read more less

SIEMENS DIGITAL OUTPUT SM 1226, F-DQ 4X 24VDC  6ES72266DA320XB0 SIMATIC S7-1200, digital output module SM 1226, F-DQ 4x DC 24V 2A, PROFIsafe, width 70mm, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508) . General information:Product type designation SM 1226 F-DQ 4 x 24 VDC Supply voltageAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VVoltage supply required according to NEC class 2 No Input currentfrom backplane bus DC 5 V, max. 125 mA Digital outputs● from load voltage L+, max. 170 mA Power dissipationPower dissipation, typ. 8 W Digital outputsNumber of outputs 4● in groups of 1Short circuit protection Yes Interrupting capacity of outputs● with ohmic load, max. 30 Hz● with lamp load, max. 10Hz Output voltage                                                                        ● Rated value (DC) 24 466> Output current● for signal "1" rated value 2 A● for signal "1" permissible range, max. 10 mA ... 2.4 A● for signal "0" residual current, max. Switch on PNP: 0.5 mA, max.; NPN switch: 0.5 mA, max. Cable length● with shielding, max. 200 m● unshielded, max. 200 m Alarms/diagnostics/status informationDiagnostic display LED● for output status Yes Degree of protection and safety classIP protection degree IP20Standards, approvals, certificatesCE mark YescULus Yes FM approval YesHighest safety class achievable in safety operation● Performance Level according to ISO 13849-1 Category 4, PL e● SIL according to IEC 61508 SIL 3

Read more less

SIEMES SIMATIC S7-1200, CPU 1214C  6ES72141AG400XB0 SIMATIC S7-1200, CPU 1214C, compact CPU, DC/DC/DC, onboard I/O: 14 DI DC 24 V; 10 DO DC 24V; 2 AI 0...10V DC, power supply: DC DC 20.4...28.8V, program memory / data memory 150 KB. General information: Product type designation CPU 1214C DC/DC/DCFirmware version V4.6 Engineering with● Programming package from STEP 7 V18Supply voltageRated value (DC)● DC 24 V Yes Allowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Load voltage L+● Rated value (DC) 24 V● Permissible range, lower limit (DC) 20.4 V● Allowable range, upper limit (DC) 28.8 V Input currentCurrent consumption (nominal value) 500 mA; CPU onlyCurrent consumption, max. 1 500 mA; CPU with all expansion modulesInrush current, max. 12A; at 28.8 V I²t 0.5 A²·s Output currentfor backplane bus (DC 5 V), max. 1 600 mA; max. DC 5 V for SM and CM Transducer power supply24 V transducer power supply● 24 V L+ minus 4 V DC min. Power dissipationPower dissipation, typ. 12 W MemoryWork memory● integrated 150 kbyte Load memory● integrated 4 MB● insertable (SIMATIC Memory Card), max. with SIMATIC Memory Card Back-up collision● present Yes● maintenance-free Yes● without battery Yes CPU processing timesfor bit operations, typ. 0.08 μs;   

Read more less

SIEMENS SIMATIC S7-200 6ES72310HC220XA0 SIMATIC S7-200, analog input module EM 231, only for S7-22X CPU, 4 AI, 0-10V DC, 12 bit converter - Spare part. General information: Input currentfrom load voltage L+ (without load), max. 60 mAfrom backplane bus DC 5 V, max. 20 mA Power dissipationPower dissipation, typ. 2 W Analog inputsNumber of analog inputs 4; DifferenceAllowed input voltage for voltage input (destructivelimit), max. 30 VPermissible input current for current input (destructivelimit), max. 32 mA Input ranges● Voltage Yes● Current Yes● Thermocouple No● Thermoresistance No● Resistance No Input ranges (nominal values), voltages● 0 ... +5 V Yes— Input resistance (0 ... 5 V) 10 MΩ● 0 ... +10 V Yes— Input resistance (0 ... 10 V) 10 MΩ● -2.5 V ... +2, 5 V Yes— Input resistance (-2.5 V ... +2.5 V) 10 MΩ● -5 V ... +5 V Yes— Input resistance (-5 V ... +5 V) 10 MΩ Input ranges (nominal values), currents● 0 ... 20 mA Yes— Input resistance (0 ... 20 mA) 10 MΩ Thermocouple (TC)Temperature compensation— parameterizable No Cable length● with shielding, max. 100m; to the sensorAnalog value generation for the inputsIntegration and conversion time / resolution per channel● Resolution with overrange (bit incl. sign),max. 12 bit● Interference voltage suppression for frequencyinterference f1 in Hz 40 dB, DC ... 60 V for interference frequency 50 / 60 Hz● Conversion time (per channel) 250 μs6ES72310HC220XA0  

Read more less

SIEMENS COMMUNICATION PROCESSOR CP 1543-1 6GK75431AX000XE0 CP 1543-1 communications processor for connecting SIMATIC S7-1500 to Industrial Ethernet; TCP/IP, ISO, UDP, S7 communication, IP broadcast/multicast, security (VPN, firewall) diagnostics SNMPv1/v3, DHCP, FTP client/server, e-mail, IPv4/IPv6, IEEE 802.1X (radius), time synchronization via NTP, 1x RJ45 (10/100/1000 Mbit). General information: Transmission rate● on interface 1 10 ... 1000 Mbit/s Interfacesnumber of interfaces / according to Industrial Ethernet 1number of electrical connections● on interface 1 / according to Industrial Ethernet 1 carrying out the electrical connection● on interface 1 / according to Industrial Ethernet RJ45 port Supply voltage, absorbed current, dissipated powertype of voltage / of the DC supply voltagesupply voltage / 1 / from backplane bus 15 Vrelative symmetrical tolerance / with DC● with 15 V 3 % current consumption● from backplane bus / with DC / with 15 V / typ. 0.35 A power dissipation [W] 5.3 W Environmental conditions ambient temperature● for vertical installation / during operation 0 ... 40 °C● with horizontal installation / during operation 0 .. .60 °C● during storage -40 ... +70 °C● during transport -40 ... +70 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection degree IP20 Design, dimensions and weightsmodule format Single-width compact S7-1500 modulewidth 35 mmheight 142 mmdepth 129 mmnet weight 0.35 kgfastening type● mounting on S7-1500 profile rail Yes Product features, product functions, product components / genericnumber of units● per CPU / max. 8● note dependent on CPU type

Read more less

SIEMENS SIRIUS SAFETY RELAY STD RELAY 3NO,1NC 3SK11112AB30 SIRIUS safety device basic device Standard series relay enabling circuits 3 NO contacts plus relay signaling circuit 1 NC Us = AC/DC 24 V spring terminal (Push-in). General technical data:IP protection degree of the housing IP20contact protection against electrocution finger protectioninsulation voltage nominal value 300 V Ambient temperature● during storage -40 ... +80 °C● during operation -25 ... +60 ° Catmospheric pressure according to SN 31205 90 ... 106 kParelative humidity during operation 10 ... 95 %installation altitude for altitude above sea level. max. 4 000 m; For derating see Product Communication 109792701vibration resistance according to IEC 60068-2-6 5 ... 500 Hz: 0.75 mmshock resistance 10g / 11 msimpulse withstand voltage nominal value 4 000 VeMC interference emission IEC 60947-5-1, IEC 61000EMC-related installation environment This product is suitable for class B environments and can also be usedin domestic environments .overvoltage category 3pollution degree 3reference code according to IEC 81346-2:2009 Fpower dissipation [W] max. 2 Wnumber of inputs for 1- or 2-channel sensors 1cascade connection noneinput safety wiring designsingle-channel and redundant product feature cross-circuit protection Yes Safety Integrity Level (SIL)● according to IEC 62061 3● according to IEC 61508 3performance Level (pL) ● according to ISO 13849-1 and category according to EN ISO 13849-1 4non-dangerous failure rate (SFF) 99 %PFHD for high demand rate according to EN 62061 1.7E-9 1/hPFDavg for low demand rate according to IEC 61508 1E-6T1 value for proof test interval or duration of use according to IEC 61508 20 years.

Read more less

SIEMENS SIMATIC NET SCALANCE XB005 6GK50050BA001AB2 SCALANCE XB005 unmanaged Industrial Ethernet Switch for 10/100 Mbit/s; for the configuration of small star structures and linear structures; LED diagnostics, IP20, AC/DC 24V voltage supply, with 5x 10/100 Mbit/s Twisted Pair Ports with RJ45 sockets. General information: Transmission ratetransmission rate 10 Mbit/s, 100 Mbit/s Interfaces / for communication / max. configuration with modular devicesnumber of electrical doors / max. 5interfaces / for communication / integr.number of electrical connections● for network components or terminal equipment 5; RJ45number of SC ports at 100 Mbit/s● for multimode 0 interfaces / othersnumber of electrical connections● for voltage supply 1execution of the electrical connection● for voltage supply Terminal block 3 poly Supply voltage, current consumption, power dissipationvoltage type / 1 / of the DC supply voltage● supply voltage / 1 / nominal value 24 V● power dissipation [W] / 1 / nominal value 1.68 W● supply voltage / 1 / nominal value 19.2 ... 28.8 V● current consumption / 1 / max. 0.07 A● execution of the electrical connection / 1 / for voltage supply3-pole terminal block● integral part of the product / 1 / input protectionpower supply Yes● implementation of protection / 1 / on the input forsupply voltage 0.6 A / 60 Vtype of voltage / 2 / of the supply voltage AC● voltage power supply / 2 / nominal value 19.2 ... 28.8 V Environmental conditionsambient temperature● during operation -10 ... +60 °C● during storage -40 ... + 80 °C● during transport -40 ... +80 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection degree IP20construction form, dimensions and weightsBox construction formwidth 45 mmheight 100 mm

Read more less

SIEMENS SINAMICS G120C PN 0.75KW FILA  6SL32101KE123AF2 SINAMICS G120C rated power: 0.75kW with 150% overload for 3 sec. 3AC380-480V+10/-20% 47-63Hz integrated class A filter I/O interface: 6DI, 2DO, 1AI, 1AO Integrated Safe-Torque-Off integrated fieldbus: PROFINET PN protection degree IP20/UL Open type size : FSAA 173x 73x 178 (HxWxD) 24V external.  

Read more less

Siemens ie fc rj45 plug 180 2X2  6GK19011BB102AA0  Industrial Ethernet FastConnect RJ45 Plug 180 2x 2, RJ45 connector (10/100 Mbit/s) with robust metal housing and FC connection technology, for IE FC 2x 2 cable; 180° cable exit. Fitness for employment      For connection to IE FC TP 2 x 2 cables, suitable for quick assembly with the FastConnect system Transmission rate transmission rate / with Industrial Ethernet           10 Mbit/s, 100 Mbit/s Interfaces number of electrical connections      for Industrial Ethernet FC TP 4 cables for network components or terminal equipment 1 Making the electrical connection  for Industrial Ethernet FC TP cables Integrated insulation displacement contacts for 4-core TP FC installation cables AWG 22 for network components or terminal equipment RJ45 connector carrying out the electrical connection / FastConnect     Yes Mechanical data case material /        metal number of reuses       10 interlock execution       other Constructive form, dimensions and weights cable exit type          180° cable exit width           13.7 mm height 16 mm depth         55 mm net weight        35 g connectable cable diameter      6.5 ... 6.5 mm connectable conductor section           0.33 mm² Environmental conditions ambient temperature during operation -40 ... +85 °C during storage -40 ... +85 °C during transport -40 ... +85 °C relative humidity at 25 °C / without condensation / during operation / max. 95 % IP protection degree   IP20 Product features, product functions, product components / generic product feature         with PoE property Yes with PoE+ property Yes absence of silicone Yes An integral part of the product  fire relief Yes Standards, specifications, approvals Certificate of eligibility   RoHS compliant Yes UL approval Yes cULus approval Yes railway use according to EN 50155 No standard for structured cabling        C

Read more less

Siemens Industrial Ethernet FastConnect 6GK19010DB206AA0 Industrial Ethernet FastConnect M12 Plug PRO 2x2 M12 connector with robust metal housing and FC connection technology, with axial cable outlet (D-coded) 1 pack = 1 piece for SCALANCE X208 PRO and ET 200 PRO PN. Eligibility for employment:     For connecting electrical cables to SCALANCE X208PRO, ET 200pro PN or ET 200eco PN, for quick assembly with the FastConnect system Transmission rate transmission rate / with Industrial Ethernet 10 Mbit/s, 100 Mbit/s Interfaces  number of electrical connections      for Industrial Ethernet FC TP 4 cables for network components or terminal equipment 1 Making the electrical connection  for Industrial Ethernet FC TP cables Integrated insulation displacement contacts for 4-core TP FC installation cables AWG 22 for network components or terminal equipment M12 connector (D-coded) carrying out the electrical connection / FastConnect     Yes Mechanical data material / of the case    metal number of reuses       10 interlock execution       Screw connection tightening torque / for M12 round connector / max. 0.6 N m coding connector / of the M12 round connector           D constructive form, dimensions and weights cable exit type          180° cable exit width           19 mm height 19 mm depth         73 mm net weight        40 g connectable cable diameter      6.5 ... 6.5 mm connectable conductor section           0.33 mm² environmental conditions Room temperature during operation -40 ... +85 °C during storage -40 ... +85 °C during transport -40 ... +85 °C Relative humidity at 25 °C / without condensation / during operation / max. 95 % Chemical resistance         water resistant IP protection degree   IP65/67

Read more less

SIEMENS SIMATIC HMI KTP400 COMFORT  6AV21242DC010AX0 SIMATIC HMI KTP400 Comfort, Comfort Panel, key/touch operation, 4" widescreen TFT display, 16 million colours, PROFINET interface, MPI/PROFIBUS DP interface, 4 MB configuration memory, Windows CE 6.0, configurable from WinCC Comfort V11. General information:Product type designation KTP400 Comfort DisplayDisplay design TFTScreen diagonal 4.3 inDisplay width 95 mmDisplay height 53.8 mm Number of colors 16 777 216 Resolution (pixels)● Horizontal image resolution 480 pixels● Vertical image resolution 272 pixels Backlight● MTBF of backlight (at 25 °C) 80 000 h● Backlight dimmable Yes; 0-100 % Control elementsKeyboard fonts● Function keys— Number of function keys 4— Number of function keys with LED 4 ● Keys with LED Yes● System keys No● Numeric keypad Yes; Onscreen Keyboard● Alphanumeric Keyboard Yes; Onscreen Keyboard Touch operation● Version as touchscreen Yes; analog-resistiveExpansions for process control● DP direct LEDs (LEDs as S7 output I/O)— F1...Fx 4● Direct keys (keys as S7 output I/O) S7 input)— F1...Fx 4● Direct keys (virtual touch keys as S7 input peripherals) 32 Mounting typeVertical installation positionDirect / wall mounting NoVertical built-in possible (portrait format) YesPossible horizontal recessed installation (landscape format) YesMaximum inclination angle allowed without ventilationforced 35°.  

Read more less

SIEMENS SITOP SEL1200 SELECTIVITY MODULE 8 *10A 6EP44387FB003DX0 SITOP SEL1200 8-channel selective module switching characteristic input: DC 24 V/60 A output: DC 24 V/8 x 10 A settable threshold value 2 ... 10 A with monitoring interface. General information: Inputshape of the electrical network Regulated DC voltagesupply voltage with DC rated value 24 Vinput voltage with DC 20.4 ... 30 Voverloadability for overvoltage 35 Vinput current with nominal value of the input voltage24 V nominal value 60 A Outputshape of the voltage curve at the output Regulated DC voltageformula for output voltage Ue - approx. 0.2 Voverall relative voltage tolerance known Corresponding to the input supply voltage number of outputs 8output current up to 60 °C for each output rated value 10 A; +60 ... +70 °C: Derating 2%/K settable trip value for current-dependent overload release current 2 ... 10 Atype of trip value setting Via potentiometercharacteristic of the product parallel connection of outputs Yestype of activation of the outputs Activation of all outputs when the steady state value of thesupply voltage > 20 V is reached, delay time of 25 ms, 200 ms, 500 ms or can be set via DIP switch for "load-optimized" sequential switching Efficiencyefficiency [%] 98 %power dissipation [W] at nominal value of theoutput voltage at nominal value of the output current typ. 18 W Switch-off characteristic for each outputswitching characteristic● of overcurrent shutdown IA > 2.0 x set value, switch-off after approx. 30 ms, IA > 1.8 x setvalue, switches off after approx. 0.1 s, IA > 1.5 x set value,switch-off after approx. 1 s, IA > 1.0 x set value, switches off after approx. 5 s● of immediate switch-off IA > set value and Ue 15 V) Protection and monitoringperforming protection on the 16 A input for each output (not accessible) performing the display for normal operation Tricolor LED for each output: green LED for "Output switched on", yellow LED for "Output manually switched off", red LED for "Output switched off due to overcurrent" execution of the switching contact for signaling function. Status signal output or floating cumulative signaling contact (pause/pulse signal selectable from the Simatic function block).  

Read more less

SIEMENS SITOP PSE200U SELECTIVITY MODULE 10A 6EP19612BA21  SITOP PSE200U 10 A 4-channel selective module input: DC 24 V/40 A output: DC 24 V/4x 10 A threshold value settable 3 ... 10 A with cumulative signaling contact. General information: Inputshape of the electrical network Regulated DC voltagesupply voltage with DC nominal value 24 Vinput voltage with DC 22 ... 30 Voverloadability for overvoltage 35 Vinput current at nominal value of theinput voltage 24 V nominal value 40 A Outputshape of the voltage curve at the output Regulated DC voltageformula for output voltage Ue - approx. 0.2 Vrelative overall tolerance of the known voltage Corresponding to the input supply voltagenumber of outputs 4output current up to 60 °C for each output nominal value 10 Avalue of trip settable for release current ofcurrent-dependent overload3 ... 10 Atype of trip value setting By potentiometerproduct characteristic parallel connection of outputs No type of activation of the outputs Simultaneous activation of all the outputs upon reaching the value ofsupply voltage regime > 20 V, delay time of 24 ms, 100ms or settable via DIP switch for sequential activation"load optimized" Efficiencyefficiency [%] 99 %power dissipation [W] at nominal value of theoutput voltage at nominal value of the output current typ.10 W Switch-off characteristic for each outputswitching characteristic● of the overcurrent switch-off IA = 1.0 ... 1.5 x set value, switch-off after approx. . 5 s● of the current limitation IA = 1.5 x set value, shutdown after typ. 100 ms● of immediate switch-off IA > set value and Ue residual current at switch-off typ. 1 mAReset execution via button for each outputRemote RESET function Non-floating 24 V input (signal level "high" at > 15 V) Protection and monitoringcarrying out protection on the 15 A input for each output (not accessible)running the display for normal operation Tricolor LED for each output: green LED for "Output switched on", yellow LEDfor "Output manually switched off", red LED for "Output switched off due to overcurrent" design of switching contact for signaling functionGroup signaling contact (changeover contact, loadability 0 ,1 A/DC 24 V).  

Read more less

SIEMENS DIGITAL INPUT SM 1221 6ES72211BH320XB0 Digital input module SM 1221, 16DI, DC 24V, Sink/Source. General informationProduct type designation SM 1221, DI 16x24 VDCSupply voltageRated value (DC) 24 VPermissible range, lower limit (DC) 20.4 VPermitted range, upper limit (DC) 28.8 VInput currentfrom backplane bus DC 5 V, max. 130 mA Digital inputs● from load voltage L+ (without load), max. 4 mA; per channeloutput voltage / headertransmitter supply voltage / header● present Yes Power dissipationPower dissipation, typ. 2.5 WDigital inputs Number of entries 16● in groups of 4 Input characteristic according to IEC 61131, Type 1 YesNumber of inputs manageable simultaneouslyall installation positions— up to 40 °C, max. 16 Horizontal mounting position— up to 40 °C, max. 16— up to 50 °C, max. 16 Vertical mounting position— up to 40 °C, max. 16 Input voltage● Rated value (DC) 24 V● for "0" signal 5 V DC at 1 mA● for signal "1" DC 15 V at 2.5 mA Input current● for signal "0", max. (permissible quiescent current) 1 mA● for signal "1", min. 2.5 mA● for signal "1", typ. 4 mA Input delay (with nominal value of the input voltage)for standard inputs— parameterizable Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of 4 for alarm inputs.

Read more less

SIEMENS SIMATIC HMI KTP900 BASIC  6AV21232JB030AX0 SIMATIC HMI, KTP900 Basic, Basic Panel, key/touch operation, 9" TFT display, 65536 colours, PROFINET interface, configurable from WinCC Basic V13/STEP 7 Basic V13, includes Open software Source, The provided free of charge see the attached CD.  General information:Product type designation KTP900 Basic color PN      DisplayDisplay design TFT display Widescreen, LED backlightScreen diagonal 9 inDisplay width 198 mmDisplay height 111.7 mmNumber of colors 65 536 Resolution (pixels)● Horizontal image resolution 800 pixels● Vertical image resolution 480 pixels Backlight● MTBF of backlight (at 25 °C) 20 000 h● Backlight dimmable Yes Control elementsKeyboard fonts● Function keys— Number of function keys 8— Number of function keys with LED 0 ● Keys with LED No● System keys No● Numeric keypad Yes; Onscreen Keyboard● Alphanumeric Keyboard Yes; Onscreen Keyboard Touch operation● Version as touchscreen Yes; analog-resistive Mounting typeVertical installation positionVertical mounting possible (portrait format) YesHorizontal mounting possible (landscape format) YesMaximum angle of inclination allowed without ventilationforced 35° Supply voltageType of supply voltage DCRated value (DC) 24 VPermissible range, limit lower (DC) 19.2 VAllowable range, upper limit (DC) 28.8 V Input currentCurrent consumption (nominal value) 230 mAImpulse current on insertion I²t 0.2 A²·s PowerActive power absorbed, typ. 5.5 W

Read more less

SIEMENS SITOP PSU200M 24 V/10 A, VARNISHED PCB 6EP13343BA108AB0 SITOP PSU200M plus 10 A Stabilized power supply input: AC 120 ... 230/230 ... 500 V output: DC 24 V/10 A variant with protective paint.  General information: Inputform of the electrical network Single-phase and two-phase ACsupply voltage with AC● initial value Setting via switch on the devicesupply voltage ● 1 with AC 120 ... 230 V● 2 with AC 230 ... 500 Vinput voltage● 1 with AC 85 ... 264 V● 2 with AC 176 ... 550 Vinput execution wide-range input Yesoverloadability due to overvoltage 1300 Vpeak, 1.3 msbackup operating condition due to lack of mains voltageWith Ue = 120/230 V, typ. 150 ms with Ue = 400 Vbuffering time with nominal value of the output currentin case of mains voltage failure min.25 msbuffering operating condition due to mains voltage failureWith Ue = 120/230 V, typ. 150 ms with Ue = 400 V mains frequency● 1 nominal value 50 Hz● 2 nominal value 60 Hzmains frequency 47 ... 63 Hzinput current● at 120 V input voltage rating 4.4 A● at 230 V input voltage rating 2.4 A● at 500 V input voltage rating 1.1 A current limitation of the inrush current to 25 °C max. 35 AI2t value max. 4 A² sexecution of protection T 6.3 A (not accessible)● of the mains cable Recommended thermal-magnetic switch for single-phase operation: starting.from 6 A (10 A) characteristic C ( B); required for two-phase operation:thermal-magnetic circuit breaker with bipolar coupling or automaticbreaker 3RV2011-1EA10 (setting to 3.8 A) or 3RV2711-1ED10 (UL489) with 230 V, 3RV2011-1DA10 (setting on 3 A) or 3RV2711-1DD10 (UL 489) with 400/500 V Outputshape of the voltage curve at the output regulated potential-free direct voltageoutput voltage with DC nominal value 24 Voutput voltage● at output 1 with DC nominal value 24 Vrelative overall voltage tolerance 3 %relative control accuracy of the output voltage.

Read more less

SIEMENS SINAMICS G120C PN 1.5KW FILA  6SL32101KE143AF2 SINAMICS G120C rated power: 1.5kW with 150% overload for 3 sec. 3AC380-480V+10/-20% 47-63Hz integrated class A filter I/O interface: 6DI, 2DO, 1AI, 1AO Integrated Safe-Torque-Off integrated fieldbus: PROFINET PN protection degree IP20/UL Open type size : FSAA 173x 73x 178 (HxWxD) 24V external.  General information: Max. output frequency:550 Hz Number of parallel hw interfaces:0 Number of analog inputs:1 Number of digital outputs:2 Maximum output voltage:480 V Number of analog outputs:1 Number of hw industrial ethernet interfaces:2 Number of tty serial hw interfaces:1 Mains voltage:380÷480 V Relative symmetrical grid frequency tolerance:5 % Number of profinet hw interfaces:2 Number of other hw interfaces:6 Depth:178 mm Number of rs232 serial hw interfaces:1 Number of rs422 serial hw interfaces:0 Number of digital inputs:6 Height:173 mm Max. power delivered with linear load at nominal output voltage:1.1 kW Number of usb hw interfaces:1 Width:73 mm Rated output current i2n:4.3 A Relative symmetrical mains voltage tolerance:-20 % Max. power delivered with square load at nominal output voltage:1.5 kW Number of rs485 serial hw interfaces:  

Read more less

SIEMENS SIMATIC S7-1500, CPU 1511-1 PN  6ES75111AK020AB0 SIMATIC S7-1500, CPU 1511-1 PN, Central processing unit with 150 KB work memory for program and 1 MByte for data, 1st interface: PROFINET IRT with 2-port switch, Bit performance of 60 NS, SIMATIC Memory Card required.    General informationProduct type designation CPU 1511-1 PNHardware version FS03Firmware version V2.9 Product function● I&M data Yes; I&M0 ... I&M3● Isochronous operation Yes; Decentrally and centrally; with min. OB 6 x cycle of 625 μs(decentrally) and 1 ms (centrally) Engineering with● STEP 7 TIA Portal configurable/integrated fromversionV17 (FW V2.9) / from V15 (FW V2.5 ); configurable as 6ES7511-1AK01-0AB0with older versions of TIA Portal Configuration controlvia data set Yes DisplayScreen diagonal [cm] 3.45 cmControl elementsNumber of keys 8Operating mode keys 2 Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) ) 28.8 VReverse polarity protection Yes Mains and voltage failure buffering● Mains/voltage failure buffering time 5 ms● Repetition rate, min. 1/s Input currentCurrent consumption (nominal value) 0.7 ACurrent consumption, max. 0.95 AInrush current, max. 1.9A; Nominal valueI²t 0.02 A²·s PowerSupply power in the backplane bus 10 WPower absorbed by the backplane bus (balanced) 5.5 W Power dissipationPower dissipation, typ. 5.7 W MemoryNumber of slots for SIMATIC Memory Card 1SIMATIC Memory Card required Yes  

Read more less

SIEMENS SIMATIC S7-1500 6ES75050KA000AB0 SIMATIC S7-1500, system power source PS 25W DC 24V, supplies the backplane bus of the S7-1500 with the operating voltage.  General information: Product type designation PS 25W 24VDCHardware version FS02Firmware version V1.0.0 Engineering with● STEP 7 TIA Portal configurable/integrated fromversionV12 / V12● STEP 7 configurable/integrated from version from V5.5 SP3 Supply voltageRated value (DC) 24 VPermissible range, lower limit (DC) 19.2 V; static 19.2 V, dynamic 18.5 VAllowable range, upper limit (DC) 28.8 V; static 28.8 V, dynamic 30.2 VReverse polarity protection YesShort circuit protection Yes Mains and voltage interruption buffering● Mains/voltage interruption buffering time 20 ms Input currentRated value at 24 V DC 1.3 A Output currentShort circuit protection Yes PowerSupply power in the backplane bus 25 W Power dissipatedPower dissipated at nominal conditions 6.2 W Alarms/diagnostics/status informationStatus display Yes Potential separationprimary/secondary Yes InsulationInsulation tested with DC 707 V (Type Test)EMC Immunity to impulse voltage disturbances (surge)● Immunity to disturbances on power supply conductorsaccording to IEC 61000-4-5Yes; ±1 kV (according to IEC 61000-4-5; 1995; Surge symm.), ±2 kV (according to IEC61000-4-5; 1995; Surge asymm.), does not require an external protection circuit Degree of protection and safety classIP protection degree IP20. Protection class of operational equipment III, with protective conductor Environmental conditions Altitude during operation, with reference to sea level.      

Read more less

SIEMENS COMMUNICATION PROCESSOR CP 1542SP-16GK75426UX000XE0 CP 1542SP-1 communications processor for connecting a SIMATIC S7-ET 200SP module to Industrial Ethernet; open IE communication (TCP/IP, ISO on TCP, UDP), PG/OP, S7 routing, IP broadcast/multicast, SNMPV1, DHCP, e-mail, IPV4/IPV6, time synchronization via NTP, access to the company's web server CPU, BusAdapter required. General information: Baud rateBaud rate● on interface 1 10 ... 100 Mbit/sinterfacesnumber of interfaces / according to Industrial Ethernet 1number of electrical connections● on interface 1 / according to Industrial Ethernet 2execution of the electrical connection● on interface 1 / according to Industrial Ethernet via BusAdapter ET 200SP (RJ45, FC, LC, SCRJ), integrated switch Supply voltage                                                       current absorbed, power dissipatedtype of voltage / of the supply voltage DCsupply voltage 24 Vsupply voltage 19.2 ... 28.8 Vpower dissipation [W] 6 Wenvironmental conditionsambient temperature● for vertical installation / during during operation -30 ... +50 °C● with horizontal installation / during operation -30 ... +60 °C● during storage -40 ... +70 °C ● during transport -40 ... +70 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection degree IP20 Constructive form, dimensions and weightswidth 60 mmheight 117 mmdepth 74 mmnet weight 0.18 kgMounting type● ​​Mounting on 35 mm DIN rail YesProduct features, product functions, product components / genericNumber of units● per CPU / max. 2● note 2 CPs can be inserted for each CPU, simultaneous operation possiblewith BA Send and CM DPpower data / open communicationnumber of connections possible / for open communication ● via T blocks / max. 32 volumes of data.    

Read more less

SIEMENS COMMUNICATION MODULE CM 1542-1 6GK75421AX000XE0 CM 1542-1 communication module for connecting S7-1500 to PROFINET as IO controller or IO device: TCP/IP, ISO on TCP, UDP, S7 communication, IP broadcast multicast, SNMPV1, synchronization hourly via NTP, 2xRJ45 (10/100 Mbit). General information: Baud rateBaud rate● on interface 1 10 ... 100 Mbit/s Interfacesnumber of interfaces / according to Industrial Ethernet 1number of electrical connections● on interface 1 / according to Industrial Ethernet 2connection execution electrical● on interface 1 / according to Industrial Ethernet RJ45 port Supply voltage                                                        current absorbed, power dissipatedtype of voltage / of the supply voltage DCsupply voltage / 1 / from backplane bus 15 Vtolerance relative symmetrical / with DC● with 15 V 3 % Current consumption● from backplane bus / with DC / with 15 V / typ. 0.22 Apower loss [W] 3.3 Wambient conditionsambient temperature● for vertical installation / during operation 0 ... 40 °C● with horizontal installation / during operation 0 ... 60 °C● during storage -40 ... +70 °C● during transport -40 ... +70 °C Relative humidity● at 25 °C / non-condensing / during operation / max. 95 %IP protection class IP20design, dimensions and weightsmodule format Single-width S7-1500 compact modulewidth 35 mmheight 142 mmdepth 129 mmnet weight 0.4 kg Type of fastening● mounting on S7-1500 standard rail Yesproduct features, product functions, product components / genericnumber of units ● per CPU / max. 8● note dependent on CPU type  

Read more less

SIEMENS S7-1500, DI 32X24VDC HF 6ES75211BL000AB0 SIMATIC S7-1500, DI 32xDC 24V HF digital input module, 32 channels in groups of 16; of which 2 inputs can be used for counting; input delay 0.05..20ms input type 3 (IEC 61131); diagnostics; Process interrupt: front connector (screw terminals or push-in) to be ordered separately.  General informationProduct type designation DI 32x24VDC HFHardware version from FS04Firmware version V2.2.1● FW update possible Yes Product function● I&M data Yes; I&M0 ... I&M3● Isochronous operation Yes● Prioritized start Yes Engineering with● STEP 7 TIA Portal configurable/integrated from versionV13 SP1 / -● STEP 7 configurable/integrated from version V5.5 SP3 / -● PROFIBUS from GSD version/GSD revision V1.0 / V5.1● PROFINET from GSD version/GSD revision V2.3 / - Operating mode● DI Yes● Counter Yes● Oversampling No● MSI Yes Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) ) 28.8 VReverse polarity protection Yes Input currentCurrent consumption, max. 40mA; 20 mA each group with DC 24 V supply voltage PowerPower draw from backplane bus 1.1 WPower lossPower loss, typ. 4.2 WDigital inputs Number of inputs 32parameterizable digital inputs YesRead on m/p Read on PInput characteristic according to IEC 61131, Type 3 Yes Digital input functions, parameterizable● Gate start/stop Yes● Digital input freely usable Yes  

Read more less

SIEMENS SIMATIC S7- 1200F 6ES72141AF400XB0 SIMATIC S7-1200F, CPU 1214 FC, compact CPU, DC/DC/DC, onboard I/O: 14 DI DC 24 V; 10 DO DC 24V; 2 AI 0...10V DC, power supply: DC DC 20.4...28.8V, program memory / data memory 200 KB General information Product type designation CPU 1214FC DC/DC/DCFirmware version V4.6Engineering with● Programming package from STEP 7 V18 Supply voltageRated value (DC)● DC 24 V YesPermissible range, lower limit (DC) 20.4 VRange permitted, upper limit (DC) 28.8 VReverse polarity protection Yes Load voltage L+● Rated value (DC) 24 V● Permissible range, lower limit (DC) 20.4 V● Allowable range, upper limit (DC) 28.8 VInput currentCurrent consumption (nominal value) 500 mA; CPU onlyCurrent consumption, max. 1 500 mA; CPU with all expansion modulesInrush current, max. 12A; at 28.8 VI²t 0.5 A²·sOutput currentfor backplane bus (DC 5 V), max. 1 600 mA; max. 5 V DC for SM and CMTransducer supply24 V transducer supply● 24 V L+ minus 4 V DC min. Power dissipationPower dissipation, typ. 12 W MemoryWork memory● integrated 200 KBLoad memory● integrated 4 MB● insertable (SIMATIC Memory Card ), max. with SIMATIC Memory Card.

Read more less