Abb Modular Contactors (NO) 20 A - 2 NO - 0 NC - 24 V - DC Control Circuit (ESB20-20N-01) 1SBE121111R0120 Modular Contactors - Automatic Control - 2 N.O. ContactsESB20-20N-01 installation contactors are used to control single loads up to 20 A and can be operated on AC. or DC.These contactors are made for use in domestic applications and industrial environments.The following benefits are expected:Noise-free operation, low power consumption and integrated overvoltage protection. Different combinations of contacts and accessories are available. Technical dataRated operating voltage: Main Circuit 220 V DCMain Circuit 250 V ACRated control circuit voltage (Uc): 24 VFrequency nominal (f): DC Control Circuit50 Hz Control Circuit60 Hz Control Circuit400 Hz Control CircuitDC Main Circuit50 Hz Main CircuitMain Circuit 60 HzRated operating current AC-1 (Ie): (NO) 20 ARated operating current AC-3 (Ie): (230 V) Single phase, NO 9 ARated operating current AC-1 (Pe): (230 V) Single phase, NO 4. kWRated operating current AC-3 (Pe): (230 V) Single phase, NO 1.3 kWRated operating current AC-7a (Ie): (NO) 20 ARated operating current AC-7a (Pe): (230 V) Single phase, NO 4.6 kWRated operating current AC-7b (Ie): (230 V) Single phase, NO 9 ARated operating current AC-7b (Pe): (230 V) Single phase, NO 1.3 kWRecommended screwdriver: Control Circuit Pozidriv 1 Main Circuit Pozidriv 1Impulse withstand voltage (Uimp): 6 kVRated insulation voltage (Ui): 400 V

Read more less

 Schneider-Electric Release. current throw iMX+OF 110/415Vac 110/130Vcc A9A26946 This Acti9 iMX+OF auxiliary electrical release for is a shunt release device with open/closed auxiliary contact. It is dedicated to Acti9 iC60, iID, iDPN Vigi, iSW-NA. This device includes an OF open/closed contact to indicate the location of the paired device. Presentationrange of productActi9Product typeRelease coil with open/closed contactDevice nameiMX+OFsignal contact composition1 A/CRated current [In]AC-12 3 A at 415 V , AC 50 HzAC-12 6 A at 100 V, AC 50 HzAC-12 6 A at 230 V, AC 50 HzDC-12 1 A at 110 V, DC DC-12 1 A at 130 V, DCControl voltage [Uc]100...415 V AC 50/60 Hz110...130 V DC9 mm pitch 2Technical characteristicsRange compatibilityActi9 -Acti9 Acti9 ARAActi9 -Acti9 Acti9 iIDActi9 Acti9 iSW -NAActi9 Acti9 RCAActi9 Acti9 iDPN (China version)Acti9 Acti9 iC60 two-terminal thermomagnetic switchActi9 Acti9 iC40Local signalingIndicator actionInstallationHookupInstallationDIN raildistribution comb compatibilityTop part: YESwidth18 mm ColorWhiteconnections - terminalsClip terminal - 2 cables 2.5 mm² - flexible with cable terminationClip terminal - 1 cable 6 mm² - rigidClip terminal - 2 cables 2.5 mm² - rigidClip terminal - 1 cable 4 mm² - flexibletightening torque 1 NmCompatibility codeIMX+OFEnvironmentReference standardsCEI EN 60947-5-1tropicalization2 compliant with CEI EN 60947-5-1relative humidity95 % at 55 °CAmbient temperature-25…50 °CStorage temperature-40…85 °C

Read more less

Schneider Electric QuickVigi iC60 4P 25A 30mA AC Type Differential Block A9Q41425 Acti9 Vigi iC60 is a modular additional residual current device. It is a 4P, rated current of 25A, operating voltage from 400VAC to 415VAC according to IEC 61009-1. The earth leakage protection class is AC type with a sensitivity of 30 mA and voltage independent technology. This product protects against short circuits, wire overloads, electric shock from indirect contact and fire hazards. A VisiTrip window is here to indicate a fault trip via a red mechanical indicator on the front. It can be combined with iC60 or Acti9 Reflex iC60, to provide protection of people and protection of installations. This product complies with IEC 61009-1 and EN 61009-1. The nominal operating voltage Ue is 400 V AC. The rated insulation voltage Ui is 500 V AC. The rated impulse withstand voltage Uimp is 6 kV. The pollution degree is 3. It can be mounted on DIN rail. Width in 9mm steps is 6. Dimensions are (W) 54mm x (H) 91mm x (D) 73.5mm. The weight is 0.245 kg. The degree of protection is IP20 and IP40 in a cabinet. The operating temperature is between -5°C and +60°C. The storage temperature is between -40°C and +85°C. Technical dataRangeActi9Product typeResidual current add-on devicesDevice nameVigi iC60Number of poles4PRated current [In]25 Adifferential sensitivity30 mAtiming differential protectionInstantEarth leakage protection typeAC typeNetwork type ACMains frequency50/60 HzRated operational voltage [Ue]400 V AC 50/ 60 Hz conforming to EN 61009-1400/415 V AC 50/60 Hz conforming to IEC 61009-1conforming to IEC/EN 61009-2-1Reference standardsIEC 61009-1EN 61009-1pitch 9 mm6device position in the systemStarting point residual current release technology"Voltage independent"Rated insulation voltage [Ui]500 V AC 50/60 Hz compliant with IEC 60947-2Rated impulse withstand voltage [Uimp]6 kV conforming to IEC 60947-2Gamma compatibilityActi9 Acti9 iC60 Acti9 Acti9 Reflex iC60Product compatibilitySingle terminalLocal signalingTrip indicatorInstallationHookupInstallationDIN railelectrical connection to the circuit breakerPlug incomb compatibility distributionLower part: YESheight91 mmwidth54 mmdepth73.5 mmproduct weight0.245 kgconnections - terminalsBottom side cage terminal for 1 cable 1… 25 mm² rigid without cable endBottom side cage terminal for 1 cable 1…16 mm² flexible without cable endBottom side cage terminal for 1 cable 1…16 mm² flexible with cable end wire stripping length14 mm for lower part connectiontightening torque2 Nm lower part

Read more less

Schneider-electric Circuit breaker iC40N 1P+N C 10A 6000A A9P54610 This Acti9 iC40N product is a low voltage circuit breaker (MCB). It is a 1P+N switch with 1 protected pole and 10A rated current In and tripping curve C. The rated short-circuit breaking capacity reaches up to 10kA at 230VAC in compliance with the EN/IEC 60947-2 standard and 6000A at 230VAC in compliance with EN/IEC 60898-1. This product complies with industrial standards EN/IEC 60898-1 and residential standards EN/IEC 60947-2. This circuit breaker combines the functions of circuit protection against short circuits and overload current, control and isolation. Installation and wiring are simplified with clip-on functionality and easy maintenance. Technical dataRangeActi9Product nameActi9 iC40Product typeSwitch modularDevice nameiC40NApplicationDistributionNumber of poles1P + Nnumber of protected poles1neutral positionLeftRated current [In]10 AType of networkCARelease technologyMagnetothermalcurve codeCSwitching capacity10 kA Icu compliant with EN/IEC 60947-2 at 230 V AC 50/60 Hz6000 A Icn compliant with CEI EN 60898-1 at 230 V AC 50/60 Hz Aptitude for sectioningComplies with EN/IEC 60947-2quality marksAENOROVEIMQ RCMTechnical characteristicsMains frequency50/60 HzRated operational voltage [Ue]230 V AC 50/60 Hzmagnetic release limit5...10 x In conforming to CEI EN 60898-18 x In +/- 20 % conforming to EN/IEC 60947-2 Rated service breaking capacity [Ics]6000 A 100 % Icn at 230 V AC 50/60 Hz compliant with CEI EN 60898-17.5 kA 75 % Icn at 230 V AC 50/60 Hz conforming to EN/IEC 60947-2limitation class3 conforming to CEI EN 60898-1Rated insulation voltage [Ui]400 V AC 50/60 Hz conforming to EN/IEC 60947-2Rated impulse withstand voltage [Uimp]4 kV conforming to EN /IEC 60947-2contact position signalingYesType of controlLeverLocal signalingON/OFF indicationSnap indicatorInstallationAttachmentInstallationDIN rail9 mm pitch2height85 mmwidth18 mmdepth74 mm product weight120 gColorWhiteMechanical durability20000 cycleselectrical life20000 cyclesDescription of locking optionsPadlock deviceconnections - terminalsTop part cage terminals or lower1…10 mm² flexibleCage terminals upper or lower part1…16 mm² rigidwire stripping length14 mm for upper or lower part connectionpair tightening pressure2 Nm upper or lower partdifferential protectionSeparate block  

Read more less

Schneider Electric PM5110 power meter 96x96 METSEPM5110 The device is a flush mount energy meter with a 96mm x 96mm backlit LCD display. The meter ensures 0.5S accuracy class according to IEC 62053-22 and 64 samples per cycle. The device measures energy, active and reactive power, voltage, current, frequency, power factor and up to the 15th harmonic. The meter operates on a 50 or 60 Hz mains and accepts supply voltages of 100 to 415 V AC and 125 to 250 V DC. The rated line current for this meter is 1A or 5A input and supports single-phase and neutral, three-phase, or three-phase and neutral configurations. The measurement voltage range between phases is 35 to 690 V AC, 47 to 63 Hz. The measurement range between phase and neutral is 20 to 400VAC, 47 to 63 Hz. The communication protocol consists of by Modbus RTU and ASCII 2 cables with RS485 port. The meter also features a digital pulse output and 33 configurable alarms. Product Dimensions: Width 3.78 inches (96 mm), Depth 2.83 inches (72 mm), Height 3.78 inches (96 mm); weight 13.4 oz (380 g). Technical dataRangePowerLogicProduct namePowerLogic PM5000Device name PM5110Product typeMeasuring instrumentTechnical characteristicspower quality analysisUp to the 15th harmonicApplicationEnergy monitoringtype of measurementCurrentVoltageFrequencyPower factorEnergyActive and reactive powersupply voltage90...450 V AC 45...65 Hz100 ...300 V DCMains frequency50 Hz60 HzRated current [In]1 A 5 Atype of network1P + N3P + N3Ppower absorbed in VA11 VA at 415 Vlocal signaling80 ms 120 V AC typical100 ms 230 V AC typical100 ms 415 V AC typical50 ms 125 V DC typicaldisplay typeMonochrome graphic LCDdisplay resolution128 x 128sampling rate64 samples/ cyclecurrent measurement50…8500 mAanalog input typeVoltage (impedance 5 MOhm)Current (impedance measurement voltage35…760 V AC 45...65 Hz between phase and phase20…440 V AC 45...65 Hz between phase and neutralfrequency measurement range45…65 Hznumber of inputs0measurement precision Active energy +/- 0.5%Reactive energy +/- 2%Active power +/- 0.5%Apparent power +/- 0.5%Frequency +/- 0.05%Power factor +/- 0.5Current +/- 0.5%Voltage +/- 0.5%Apparent energy +/- 0.5 %Reactive power +/- 2%precision classClass 0.5S active energy compliant with IEC 62053-22number of outputs1 digitalcommunication port protocolModbus RTU and ASCII at 9.6 - 19.2 - 38.4 kbaud odd/even or none - 2 wires, 2500 V insulationJBUScommunication port protocolRS485data loggingTime indicationMin/max of instantaneous valuesconnections - terminalsVoltage circuit: screw terminal4Control circuit: screw terminal2 Currenttransformer: screw terminal6I/O circuit: screw terminal6RS485 connection: screw terminal4InstallationBuilt-insupport assemblyStructureReference standardsUL 61010-1CEI EN 50470-3CEI EN 50470-1IEC 62053-22 :2020IEC 60529IEC 62053-24IEC 61557-12:2015IEC 62053-23:2020IEC 62052-11:2020IEC 62052-3 1:2015 Product certificationsCE conforming to IEC 61010-1CULus conforming to UL 61010-1width96 mmdepth72 mmheight96 mmproduct weight380 g

Read more less

Schneider-Electric Int.mtd ICV40N 1P+N C 16A 30MA type AC A9DE3616 This Acti9 iCV40 is a modular residual current circuit breaker with overcurrent protection (RCBO). It is a 1P+N switch with 1 protected pole, 16A rated current In and tripping curve C. The protection class against earth leakage is AC type with sensitivity of 30 mA. PresentationRangeActi9Product nameActi9 iCV40Product typeThermal circuit breaker differential (RCBO)Device nameiCV40NApplicationDistributionNumber of poles1P + Nnumber of protected poles 1 neutral position LeftRated current [In] 16 AType of AC networkRelease technologyMagnetothermalcurve code Cdifferential sensitivity30 mADifferential protection timingInstantaneoustype of differential protectionAC typeInterrupting capacity6000 A Icn compliant with CEI EN 61009- 2-1 at 230 V AC 50/60 HzSuitable for isolationComplies with EN/IEC 60947-2quality marksIMQ"EAC" VDETechnical characteristicsComplementaryStarting pointMains frequency50/60 HzRated operational voltage [Ue ]230 V AC 50/60 Hzmagnetic trip limit5...10 x InResidual current trip technology"Independent from the voltage"Rated service breaking capacity [Ics]6000 A 100 % Icn at 230 V AC 50/60 Hz compliant with CEI EN 61009-2-1rated breaking and making capacityIdm 6000 A at 230 V AC 50/60 Hz conforming to EN 61009-2-1Idm 500 A at 230 V AC 50/60 Hz conforming to IEC 61009-2-1limiting class3 compliant with CEI EN 61009-2-1Rated insulation voltage [Ui]400 ​​V AC 50/60 HzRated impulse withstand voltage [Uimp] 4 kVcontact position signaling YesType of control LeverLocal signalingFault indicationON/OFF indicationInstallationCouplingInstallationDIN raildistribution comb compatibilityUpper or lower part: toothconnection pitch9 mm between phase and neutralpitch 9 mm 4height 85 mmwidth 36 mmdepth 73 mmproduct weight 210 gColor White

Read more less

Schneider Electric  iSW 2P 32A disconnect switch A9S60232 This Acti9 iSW is a modular and reliable disconnector. It is a 2P, with a rated current of 32 A and an operating voltage of 415 V AC. The electrical resistance reaches up to 30000 cycles and the mechanical resistance reaches up to 300000 cycles. The operating temperature ranges from -20°C to +50°C. PresentationRangeActi9Product nameActi9 iSWProduct typeSwitch operating-disconnectorDevice nameiSWApplicationControlNumber of poles2PUsage categoryAC- 22ASuspension suitabilityYesTechnical characteristicsRated operational current [Ie]32 A at 415 V AC 50/60 HzRated operational voltage [Ue]415 V AC 50/60 HzRated insulation voltage [Ui]500 V AC 50 /60 Hz compliant with CEI EN 60669-2-4Rated impulse withstand voltage [Uimp]4 kVType of control LeverLocal signalingON/OFF indicationcontact position signalingYesInstallationFixedInstallation DIN railpitch 9 mm2height77 mmwidth18 mmdepth70 mmColorWhiteMechanical life300000 cycleslife electrical30000 cyclesconnections - terminalsCage terminals - 10 mm² - rigidCage terminals - 10 mm² - flexibleCage terminals - 10 mm² - flexible with ring nutwire stripping length9 mmTightening torque1.2 NmEnvironmentReference standards CEI EN 60669-2-4degree of protection IPIP4degree of pollution2tropicalization2relative humidity95% at 55 °C Ambient temperature-20…50 °CStorage temperature-40…70 °C

Read more less

Schneider Electric Circuit breaker iC40a 1P+N C 16A 4500A A9P52616 This Acti9 iC40 product is a low voltage circuit breaker (MCB). It is a 1P+N switch with 1 protected pole and 16A rated current In and tripping curve C. The rated short-circuit breaking capacity reaches up to 6kA at 230VAC in compliance with the EN/IEC 60947-2 standard and 4500A at 230VAC in compliance with EN/IEC 60898-1. This product complies with industrial standards EN/IEC 60898-1 and residential standards EN/IEC 60947-2. This circuit breaker combines the functions of circuit protection against short circuits and overload current, control and isolation. Installation and wiring are simplified with clip-on functionality and easy maintenance. It has an electrical resistance of up to 20,000 cycles and a mechanical resistance of up to 20,000 cycles. The EU operating voltage is 230 V AC. The rated insulation voltage Ui is 400 V AC. The rated impulse withstand voltage Uimp is 4 kV. The operating frequency is 50 Hz or 60 Hz. It can be mounted on a DIN rail for modular installation. Its width is 2 steps of 9 mm. The pollution degree is 3. The color of the product is white (RAL 9003). Overall dimensions are (H) 18mm x (W) 85mm x (D) 74mm. The weight is 120 g. According to IEC 60529, the degree of protection is IP20 and IP40 in the cabinet. The operating temperature is between -25°C and 70°C. The storage temperature is between -40°C and 85°C. RangeActi9Product nameActi9 iC40Product typeModular switchDevice nameiC40ApplicationDistributionNumber of poles1P + Nnumber of protected poles1neutral positionLeftRated current [In]16 A Type of networkCARelease technologyMagnetothermalcurve codeCInterrupting capacity6 kA Icu compliant with EN/IEC 60947-2 at 230 V AC 50/60 Hz4500 A Icn compliant with CEI EN 60898-1 at 230 V AC 50/60 HzAptitude for sectioningYes compliant with EN/IEC 60947-2quality marksKEMAIMQ Technical dataMains frequency50/60 HzRated operational voltage [Ue]230 V AC 50/60 Hzmagnetic trip limit5...10 x In compliant with CEI EN 60898-18 x In +/- 20 % compliant with EN/IEC 60947-2Rated service breaking capacity [Ics] 4500 A 100 % Icn at 230 V AC 50/60 Hz conforming to CEI EN 60898-14.5 kA 75 % Icu at 230 V AC 50/60 Hz conforming to EN/IEC 60947-2class limitation3 conforming to CEI EN 60898-1Rated insulation voltage [Ui]400 V AC 50/60 Hz conforming to EN/IEC 60947-2 Rated impulse withstand voltage [Uimp]4 kV conforming to EN/IEC 60947-2contact position signalingYes Control typeLeverLocal signalingON/OFF indicationTrip indicatorInstallationCoupling InstallationDIN railpitch 9 mm2height85 mmwidth 18 mmdepth74 mmproduct weight120 gColorWhiteMechanical durability20000 cycleselectrical durability20000 cyclesDescription of locking options Padlock deviceconnections - terminalsCage terminals upper or lower part1…10 mm² flexibleCage terminals upper or lower part1…16 mm² rigidlength wire stripping14 mm for upper or lower part connectiontightening torque2 Nm upper or lower partdifferential protectionSeparate block

Read more less

Schneider Electric iSW 4P 32A disconnect switch A9S60432  This Acti9 iSW is a modular and reliable disconnector. It is a 4P, with a rated current of 32 A and an operating voltage of 415 V AC. The electrical resistance reaches up to 30000 cycles and the mechanical resistance reaches up to 300000 cycles. The operating temperature ranges from -20°C to +50°C. The storage temperature ranges from -40°C to +70°C. The degree of protection is IP20 and IP40 in one enclosure. It can be installed on a DIN rail. Width in 9mm steps is 4. Overall dimensions are (H)36mm x (W)77mm x (D)70mm. This disconnector is used for control. This product complies with EN/IEC 60669-2-4. Product Type: Switch disconnectorDevice Name: iSWApplication: ControlNumber of Poles: 4PUsage Category: AC-22AAbility to Disconnect: YesRated Operating Current: [Ie] 32 A at 415 V AC 50/60 HzRated Operational Voltage [Ue]: 415 V AC 50/60 HzRated Insulation Voltage [Ui]: 500 V AC 50/60 Hz conforming to CEI EN 60669-2-4Rated Impulse Withstand Voltage [Uimp]: 4 kV Control type: LeverLocal signaling: ON/OFF indicationContact position signaling: YesInstallation: Fixed Installation Guide: DINpitch 9 mm4height77 mm width36 mmdepth70 mmColourWhiteMechanical durability300000 cycleselectrical life30000 cyclesconnections - terminalsCage terminals - 1 x 10 mm² - rigidCage terminals cage - 1 x 10 mm² - flexibleCage terminals - 2 x 10 mm² - flexible with ring nutwire stripping length9 mmTightening torque 1.2 Nm

Read more less

Schneider Electric Isolator switch. DC C60NA-DC 2P 20A 1000Vdc A9N61690 Acti9 C60NA-DC is a low voltage disconnect switch dedicated to disconnecting the string of photovoltaic modules and the photovoltaic inverter. It has a 2P pole. Its rated current is 50A at 700V DC, 32A at 800VDC and 20A at 1000VDC for a CC-21B usage category. Can be mounted on DIN rail for modular installation. Its width is 8 modules of 9 mm. It has an IP40 degree of protection (according to IEC/EN 60529) on its terminals in a modular enclosure. It is designed to isolate the string of photovoltaic modules and the inverter from the rest of the photovoltaic installation for maintenance operations in total safety. Its quick closing mechanism, regardless of the speed of operation of the lever, improves its operational life. The tripping or position signaling functions are provided remotely by adding electrical auxiliaries. The presence of the green stripe guarantees the physical opening of the contacts and allows operations on the downstream circuit to be carried out in total safety. This product complies with IEC/EN 60947-3. Acti9 RangeProduct Range C60Product Type Switch disconnectorProduct Name C60Device Name C60NA-DCApplication Switch Photovoltaic field PVProtection photovoltaic inverterNumber of Poles 2PUsage Category DC-21BAbility to Disconnect Complies with EN/IEC 60947-3Rated Operating Current [Ie] 20 A DC-21B 1000 V DC32 A DC-21B 800 V DC50 A DC-21B 700 V DCVoltage Drop 100 mV 5.02 mOhm 2 W 20 A151 mV 5.02 mOhm 4.53 W 30 A201 mV 5.02 mOhm 8.04 W 40 A251 mV 5.02 mOhm 12.55 W 60 ANominal Insulation Voltage [Ui]1000 V DCNominal Impulse Withstand Voltage [Uimp] 6 kVPolarity Sensitivity No (can protect against bi-directional current)Type of Control LeverLocal Signaling ON/OFF IndicationInstallation HookInstallationDIN rail9 mm pitch8height132.7 mmwidth72 mmdepth77.4 mmproduct weight0.545 kgColourWhiteMechanical durability20000 cycleselectrical durability300 cyclesconnections - terminalsCage terminal ( upper side) 1…35 mm² rigidCage terminal (upper side) 1…25 mm² flexiblePre-wired cable (lower side)wire stripping length14 mmtightening torque3.5 NmCompatibility codeC60NA-DC

Read more less

Schneider-Electric Vigirex RH99P 220/240VAC R.M 56273  RH99P is a front panel mounting differential protection relay. Protects from direct or indirect contact, fire hazards and motors. Measures the differential current in an electrical system across the associated toroid. PresentationRangeVigiPacTDevice nameRH99PProduct type Residual current protection relayrelay applicationProtection relayInstallationFront paneltype of differential protectionType AType of regulationSelectortype of residual differential sensitivity adjustmentAdjustable, 9 valuesEarth-leakage sensitivity0.03…30 AEarth-leakage time delayInstant for 0.03 A Adjustable, 9 values ​​0…4.5 s for 0.03…30 ACurrent sensors compatibilityVigiPacT TOA differential current sensorVigiPacT A differential current sensorVigiPacT L sensor differential current Conventional thermal current in enclosure [Ithe] 8 AMinimum load10 mA at 12 VRated supply voltage [Us]220. ..240 V AC 50/60 Hz 55...110%power consumption VA 4 VAMonitored distribution system1000 V - AC at 50/60 Hz (maximum) 1000 V - AC at 400 Hz (maximum)grounding system

Read more less

Schneider Electric Wireless PowerTag F63A 3PN upstream downstream A9MEM1570 PowerTag Energy F63 1P+N 110V is a wireless communication energy sensor. With its Flex design, it is dedicated to 3P+N devices, with rated current less than or equal to 63 A. It must be associated with a concentrator or gateway to provide circuit monitoring and diagnosis up to the load level. It is designed specifically for energy management, load monitoring and power availability applications. Includes accurate real-time measurements of active energy, active power, and voltage and power factor. In case of power failure, it sends voltage loss alarm and current value per phase before shutting down. PowerTag Energy 63A complies with IEC 61557-12. It's a PMD-i/DD/K55/1. The performance category is class 1. The maximum current of Imax is 63 A. The Base current Ib is 10 A. The saturation current is 130 A and the starting current Ist is 40 mA. The rated voltage Un is phase to neutral from 220VAC to 240VAC +/- 20% and phase to phase from 380VAC to 415VAC +/- 20%. The maximum consumption is less than or equal to 2 VA. It can be mounted on the top or bottom of the protection device. The color of the product is white (RAL 9003). The weight is 40 g. The degree of protection is IP20 and IK05. The operating temperature is between -25°C and +60°C. The storage temperature is between -40°C and +85°C. Mounting System With Screws: (clamps)Electrical Connection (VoltageSensing & Power Supply): Cables with cable endsWire Section: 1 rigid cable 1.5…16 mm²2 stranded cable 1.5…2.5 mm²2 rigid cable 1.5…2.5 mm²1 stranded cable 1.5…16 mm²Cable length: 0 ,25 mSupply Voltage: 220...240 V AC, +/- 20 %, phase to neutral380...415 V AC, +/- 20 %, phase to phaseMains Frequency: 50 Hz60 HzMaximum Power Consumption: 2 VAReference Standards: IEC 61557-12IEC 61010-1IEC 61010-2-030IEC 61326-1ETSI EN 300 328ETSI EN 301 487-1Height Sensing element: 20 mmWidth Sensing element: 54 mmDepth Sensing element: 46.6 mm

Read more less

Schneider-Electric Vigipact 200/440VAC 4P NSX250 LV429493 This is a Vigi differential module for the ComPact NSX 250 which provides earth leakage protection. It is used for 4 pole circuit breakers. PresentationProduct range"ComPacT NSX100...250 new generation""ComPact NSX100...250"Device nameVigiPacTProduct typeVigi add-onApplicationWiringRange compatibility"ComPacT new generation" "ComPacT NSX250 new generation" switch automaticCompact "ComPact NSX250" circuit breakerNumber of poles 4PRated current [In] 250 AType of differential protectionClass AClass ACType of residual differential sensitivity adjustmentAdjustabledifferential sensitivity0.03 A for class A0.1 A for class A0.3 A for class A0.5 A for class A1 A for class A3 A for class A10 A for class AC30 A for class ACResidual earth fault delay adjustment typeAdjustableResidual differential timing adjustment [Δt]0 ms60 ms150 ms300 ms500 ms800 ms1.2 s4 sTechnical characteristicsNetwork typeCAMains frequency50/ 60 Hz[Ue] rated operational voltage200...440 V AC 50/60 Hz conforming to IEC 60947-2differential protectionWith maximum interruption time800 ms overvoltage category IVEnvironmentProtection class against electrical dischargesClass II

Read more less

Schneider-Electric Energy sensor, PowerTag Flex (free mounting) 160A 3P/3P+N upper and lower position energy, PowerTag Flex (free mounting) 160A 3P/3P+N upper and lower position A9MEM1580 PowerTag Energy F160 3P/3P+N is an energy sensor for wireless communication. With its Flex design, it is dedicated to 3P and 3P+N devices, with 25 to 27 mm pitch between phases, with rated current up to 160 A.  PresentationProduct rangePowerLogicProduct namePowerTag F160Product type Monitoring sensorPoles3P3P + NMaximum current [Imax]160 Aproduct for specific applicationsEnergy managementOverload alarmPower factorLoad monitoringCircuit monitoringconcentrator compatibilityActi9 PowerTag Link CActi9 PowerTag LinkActi9 PowerTag Link HDHarmony Hub"EcoStruxure Panel Server Universal""EcoStruxure Panel Server Advanced"PrismaSet Activerange compatibilityActi9 Acti9 C120Acti9 Acti9 NG125 Compact Compact NSXmTeSys TeSys GV4Compact ComPacT INSActi9 Acti9 iSWActi9 Acti9 iSW-NAActi9 Acti9 iIDPowerPact PowerPact Bmeasurement type Active and reactive energyApparent energyActive and reactive powerApparent powerCurrentVoltagePower factorInternal temperatureFrequencyaccuracy classClass 1 active energy conforming to IEC 61557-12Class 2 reactive energy conforming to IEC 61557-12Class 2 apparent energy conforming to IEC 61557- 12Class 1 active power conforming to IEC 61557-12Class 2 reactive power conforming to IEC 61557-12Class 2 apparent power conforming to IEC 61557-12Class 1 current conforming to IEC 61557 -12Class 0.5 voltage conforming to IEC 61557-12Class 1 power factor conforming to IEC 61557-12Class 0.5 frequency conforming to IEC 61557-12

Read more less

Schneider-Electric power link-TCP/IP WLESS 20POWERTAG A9XMWD20 This Acti9 PowerTag Link is an intelligent wireless communication module to Modbus TCP/IP concentrator. Must be paired with a PowerTag wireless communication energy sensor to provide circuit monitoring and diagnosis down to load level. Presentationrange of productActi9Product nameActi9 PowerTag LinkProduct typeIntelligent communication moduleDevice namePowerTag LinkApplication typeBasic measurement Energy EAdvanced load monitoring E, U, I, P, PFLoad alarmMax number of connected devicesUp to 20 wireless devicesmaximum current supplied 2 ANominal supply voltage [Us]110... 230 V AC +/- 15 %connectivity to devicesWireless monitoring sensorcommunication serviceEthernet Modbus TCP/IP serverWeb server web serverIntegrated web pageBMS compatibletransmission support mediumRadio frequency 2.4…2.4835 GHz PowerTag 20web servicesWeb page Technical characteristicsSpecific application I/OTotal pulse counterabsorbed power VA 5 VAImmunity to microinterruptions 10 ms

Read more less

Finder panel electrical socket 7U0082300010 The Type 7U.00 modular panel electrical socket is the ideal device for providing a safe and approved voltage point inside the electrical panel.Suitable for Schuko + Italian Bipasso plug, available in gray (7U) .00.8.230.00×0) and yellow (7U.00.8.230.00×2). There is also a version characterized by LEDs indicating the presence of voltage in the socket. Other features: – Rated voltage: 230 V AC– Rated current: 16 A– Width 45 mm– Mounting on 35 mm rail (EN 60715) ApplicationsControl panelsControl panels, distribution

Read more less

FINDER MODULAR CONTACTOR 40 WITH 4 CONTACTS 224402304310 Modular contactor Type 22.44 for loads with high peak currents 176 A.Contact material AgSnO2. Features: NO and NC contact opening ≥ 3 mm, double break Coil and contacts for continuous duty Silent AC/DC coil (with varistor protection) Protective separation between coil and contacts (reinforced insulation) Standard version with mechanical indicator Contact material AgSnO2 Complies with EN 61095: 2009 and with EN 60947-4-1: 2009 Mounting on 35 mm rail (EN 60715) Applications Garden: Night lightingPublic lighting: streets and car parksBathroom light controlOffice light controlPump control panels

Read more less

FINDER MODULAR CONTACTOR 25 WITH 4 CONTACTS 223402304340 Type 22.34 is a modular contactor, 25 A, 4 contacts, with screw terminals, for mounting on 35mm rail (EN 60715). Features: Width 35 mm NO contact opening ≥ 3 mm, double break Coil and contacts for continuous duty Silent AC/DC coil (with protection varistor) Protective separation between coil and contacts (reinforced insulation) Standard version with mechanical indicator and LED Version with Auto-On-Off selector Versions available with AgNi and AgSnO2 contact material Complies with EN 61095: 2009 Module with auxiliary contacts with “QuickMounting” coupling to the contactor(versions with 1NO + 1NC and 2NO) For railway applications; plastic materials compliant with fire and smoke regulations (EN 45545-2:2013) Available in the versions:-22.34.0.xxx.1xx0 (AgNi contact material, suitable for resistive, slightly inductive loads and motor loads)-22.34.0.xxx.4xx0 (AgSnO2 contact material, specific for lamp loads and loads with high peak currents) Applications Hotel: room energy enablingGarden: Night lightingPublic lighting: streets and car parksBathroom light controlOffice light controlPump control panels

Read more less

FINDER MODULAR CONTACTOR 63 WITH 4 CONTACTS 226402304310 Modular contactor specific for lamp loads with high peak currents of 240A. Features: NO and NC contact opening ≥ 3 mm, double break Coil and contacts for continuous duty Silent AC/DC coil (with varistor protection) Protective separation between coil and contacts (reinforced insulation) Standard version with mechanical indicator Version compliant with EN 60947-4-1: Mirror Contact Auxiliary module compliant with EN 60947-5-1: mechanically guided contacts Contact material AgSnO2 Mounting on 35 mm rail (EN 60715) Applications Hotel: room energy enablingGarden: Night lightingPublic lighting: streets and car parksBathroom light controlOffice light controlPump control panels

Read more less

FINDER MODULAR CONTACTOR 25 WITH 2 CONTACTS 223202304340 Modular contactor Type 22.32, 25 A, 2 contacts, with screw terminals, for mounting on 35mm rail (EN 60715). Features: Width 17.5 mm NO contact opening ≥ 3 mm, double break Coil and contacts for continuous duty Silent AC/DC coil (with protection varistor) Protective separation between coil and contacts (reinforced insulation) Standard version with mechanical indicator and LED Version with Auto-On-Off selector Versions available with AgNi and AgSnO2 contact material Complies with EN 61095: 2009 Module with auxiliary contacts with “QuickMounting” coupling to the contactor (versions with 1NO + 1NC and 2NO) Suitable for railway applications; plastic materials compliant with fire and smoke regulations (EN 45545-2:2013) Available in the versions:-22.32.0.xxx.1xx0 (AgNi contact material, suitable for resistive, weakly inductive loads and motor loads)-22.32.0.xxx.4xx0 (AgSnO2 contact material, specific for lamp loads and loads with high peak currents) Applications Hotel: room energy enablingGarden: Night lightingPublic lighting: streets and car parksBathroom light controlOffice light controlPump control panels

Read more less

Siemens sivacon, sealing tape for side-by-side mounting of cabinets, IP558mf10002cb SIVACON, sealing tape, for side-by-side mounting of cabinets, IP55 Version product brand: SIVACON product name: Panel coupling kit product design: sealing tape for IP55 degree of protection: IP IP55 integral part of the product: ventilation No Mechanical design net weight: 50g  

Read more less

Siemens door lock X 3VA10/1 STD 3VA91570FK21 IEC IP65 standard door lock rotary control with accessory door lock for: 3VA10/11. Versionproduct brand SENTRONaccessories Door lock rotary controlGeneral technical dataIP protection degree IP65 Mechanical designheight 70 mmwidth 77 mm CertificatesGeneral Product Approval EMC Declaration of Conformity

Read more less

SIEMENS METAL DIAGRAMS POCKET  8MF10002VU  SIVACON, pocket for circuit diagrams, steel, galvanized Versionproduct brand SIVACONProduct name                                                          Drawing pocketProduct design Steel

Read more less

FINDER Surge Discharger (SPD) TYPE 3 275VAC 6KV 3 7P3682752003 Surge arrester, Type 7P.36 type 3 for systems with TT and TN-S neutralSingle-phase applications for built-in installation (503 boxes) and on DIN rail.Allows easy additional protection against surges in existing wall sockets.Y-shaped configuration with acoustic signaling in case of varistor failure and acoustic test function.Equipped with 3 wires of 150 mm length for a direct connection to the socket terminals . Mounting: apparent/recessed with telecommunications contact: no number of poles: 1 max. permanent AC voltage: 275 V. rated impulse leakage current (8/20) (L-N): 3 kA. nominal voltage AC: 230 V. test class type 3: yes protection level L-N: 1.65 kV. signaling in the luminaire: acoustic Degree of protection: IP20 with anti-interference filter: no Features: Protects sensitive electrical and electronic devices from impulse surges Complies with EN 61643-11:2012 ApplicationsControl panelsSurge protectionApparatus for road use, tunnelsElevator - elevatorsControl panels, distribution

Read more less