SIEMENS SIMATIC S7-1500 6ES7515-2AM02-0AB0 CPU 1515-2 PN, central processing unit with work memory 500 KB for program and 3 MB for data, 1st interface: PROFINET IRT with 2-port switch, 2nd interface: PROFINET RT, bit performance of 30 ns, SIMATIC Memory Card required General information Product type designation CPU 1515-2 PNHardware version FS01Firmware version V2.9 Product function ● I&M data Yes; I&M0 ... I&M3● Isochronous operation Yes; Decentrally and centrally; with min. OB 6 x cycle of 500 μs (decentrally) and 1 ms (centrally) Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Input current Current consumption (nominal value) 0.8 ACurrent consumption, max. 1.1 AInrush current, max. 2.4A; Nominal valueI²t 0.02 A²·s Power Power supply in the backplane bus 12 WPower absorbed by the backplane bus (balanced) 6.2 W Power dissipated Power dissipation, typ. 6.3 W Memory Number of slots for SIMATIC Memory Card 1SIMATIC Memory Card required Yes

Read more less

SIEMENS SIMATIC S7-1500 6ES7522-1BL01-0AB0 DQ 32xDC 24V/0.5A HF digital output module; 32 channels in groups of 8; 4A for each group; single channel diagnostics; substitute value, operating cycle counter for the connected actuators. The unit supports the safe disconnection of load groups up to SIL2 according to EN IEC 62061:2021 and category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw or push-in terminals) to be ordered separately. General informationProduct type designation: DQ 32x24VDC/0.5A HFHardware version: From FS02Firmware version: V1.1.0Product function● I&M data: Yes; I&M0 ... I&M3● Isochronous operation: Yes● Prioritized startup: YesEngineering with● STEP 7 TIA Portal configurable/integrated from version: V13 SP1 / -● STEP 7 configurable/integrated from version: V5.5 SP3 / -● PROFIBUS from GSD version/GSD revision: V1.0 / V5.1● PROFINET from GSD version/GSD revision: V2.3 / -Operating mode● DQ: Yes● DQ with power saving function: No● PWM: No● Cam control (switching to comparison values): No● Oversampling: No● MSO: Yes● Integrated switching cycle counter: Yes Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes; by internal protection with 7 A per group Input current Current consumption, max.: 60 mA Power dissipated Power dissipation, typ.: 3.5 W

Read more less

SIEMENS SIMATIC DP 6ES75121SK010AB0 CPU 1512SP F-1 PN for ET 200SP, central unit with work memory 300 KB for the program and 1 MByte for data 1st interface: PROFINET IRT with 3 Port Switch, bit performance of 48 ns, SIMATIC Memory Card required, bus adapter required for port 1 and 2. General informationProduct type designation: CPU 1512SP F-1 PNHardware version: FS05Firmware version: V2.9Function of product● I&M data: Yes; I&M0 ... I&M3● Replacing a module during operation (Hot Swapping):Yes; Multi Hot Swapping● Isochronous operation: Yes; For PROFINET only; with OB 6 x min. cycle of 625 µsEngineering with● STEP 7 TIA Portal configurable/integrated from version: V17 (FW V2.9) / from V13 SP1 Update 4 (FW V1.8) Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Input current Current consumption (nominal value): 0.6 ACurrent consumption, max.: 0.9 AInrush current, max.: 4.7 A; Nominal valueI²t: 0.14 A²·s Power dissipated Power dissipation, typ.: 5.6 W

Read more less

SIEMENS SIMATIC S7-300 6ES7331-7KF02-0AB0 SM 331 analog input module, electrically isolated, 8 AI, resolution 9/12/14 bit, U/I/Thermocouple/Resistor, alarm, diagnostics, 1 x 20-pole disconnection/connection with active backplane bus Supply voltage Load voltage L+● Rated value (DC) 24 V● Reverse polarity protection Yes Input current from load voltage L+ (without load), max. 30 mA from backplane bus 5 V DC, max. 50 mA Power dissipated Power dissipation, typ. 1 W

Read more less

SIEMENS SIMATIC DP, CPU 1512SP-1 PN 6ES75121DK010AB0 CPU 1512SP-1 PN for ET 200SP, central unit with work memory 200 KB for the program and 1 MByte for data 1st interface: PROFINET IRT with 3 Port Switch, bit performance of 48 ns, SIMATIC Memory Card required, bus adapter required for port 1 and 2 General information Product type designation: CPU 1512SP-1 PNHardware version: FS05Firmware version: V2.9 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VProtection from polarity reversal: YesMains and voltage interruption buffering● Mains/voltage interruption buffering time: 5 ms Input currentCurrent consumption (nominal value): 0.6 ACurrent consumption, max.: 0.9 AInrush current , max.: 4.7 A; Nominal valueI²t: 0.14 A²·s Power dissipationPower dissipation, typ:. 5.6 W  

Read more less

SIEMENS SIMATIC DP, CPU 1510SP-1 PN for ET 200SP  6ES75101DJ010AB0  SIMATIC DP, CPU 1510SP-1 PN for ET 200SP, central processing unit with working memory of 100 KB for the program and 750 KB for data, 1st interface: PROFINET IRTwith 3 Port Switch , Bit performance of 72 NS, SIMATIC Memory Card required,bus adapter required for port 1 and 2 General Information: Product type designation: CPU 1510SP-1 PN Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesMains and voltage interruption bufferingMains/voltage interruption buffering time: 5 ms Input Current Current consumption (nominal value): 0.6 ACurrent consumption, max.: 0.9 AInrush current, max.: 4.7 A; Nominal valueI²t: 0.14 A²·s Power Supply power in the backplane bus: 8.75 W Dissipated Power Power dissipation, typ.: 5.6 W Memory Number of slots for SIMATIC Memory Card: 1SIMATIC Memory Card required: YesIntegrated work memory (for program): 100 kbyteIntegrated work memory (for data) : 750 KBInsertable load memory (SIMATIC Memory Card), max.: 32 GB Maintenance-free backup: Yes

Read more less

SIEMENS SIMATIC S7-300 6ES7322-1BL00-0AA0 Digital output module SM 322, electrically isolated, 32DA, DC 24V, 0.5A, 1 x 40-pole, total current 4A/group (16A/Baugruppe). Supply voltage Load voltage L+Rated value (DC): 24 VAllowable range, lower limit (DC): 20.4 VAllowable range, upper limit (DC): 28.8 V Input current from load voltage L+ (without load), max.: 160 mAfrom backplane bus DC 5 V, max.: 110 mA Power dissipated Power dissipation, typ.: 6.6 W Digital Releases Number of outputs: 32Short circuit protection: Yes; electronicTripping threshold, typ.: 1 ALimitation of the inductive opening extra voltage on L+: (-53 V)Control of a digital input: Yes

Read more less

SIEMENS SIMATIC ANALOG INPUT SM 1231, 4AIS7-1200 6ES72314HD320XB0 Analog input module, SM 1231, 4 AI, +/-10 V, +/-5 V, +/-2.5V, or 0-20mA/4-20mA, 12 bits + sign (13 Bit ADC) SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs. General Information Product type designation: SM 1231, AI 4x 13 bit Supply Voltage Rated value (DC): 24 V Input Current Current consumption, typ.: 45 mA from 5 V DC backplane bus, typ.: 80 mA Analog Inputs Number of analog inputs: 4; Current or voltage differential inputs Permitted input voltage for voltage input(destruction limit), max.: 35 VPermitted input current for current input (destruction limit), max.: 40 mA Cycle time (all channels), max.: 625 μs

Read more less

SIEMENS SIMATIC S7-1200 6ES72151AG400XB0 CPU 1215C, compact CPU, DC/DC/DC, 2 PROFINET ports, onboard I/O: 14 DI 24VDC; 10 DO 24VDC; 0.5A; 2 AI 0-10V DC, 2 AO 0-20mA DC, power supply: DC 20.4-28.8V DC, Program/data memory 125 KB. General information Product type designation: CPU 1215C DC/DC/DC Firmware version: V4.5 Supply voltage Rated value DC 24 VAllowable range, lower limit (DC) : 20.4 VAllowable range, upper limit (DC) : 28.8 VReverse polarity protection: YES Input current Current consumption (nominal value) 500 mA; CPU only Current consumption, max. 1 500 mA; CPU with all expansion modules Inrush current, max. 12A; at DC 28.8 V I²t 0.5 A²·s Power dissipated Power dissipation, typ. 12 W

Read more less

SIEMENS SIMATIC S7-1200 6ES7223-1BH32-0XB0 SIMATIC S7-1200, digital I/O SM 1223, 8 DI/8 DO, 8 DI DC 24V, Sink/Source, 8 DO, Transistor 0.5A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs. General Information Product type designation: SM 1223, DI 8x24 VDC, DQ 8x24 VDC Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 20.4 VAllowable range, upper limit (DC): 28.8 V Input current from backplane bus DC 5 V, max. 145 mADigital inputs from load voltage L+ (without load), max. 4 mA; for channel Dissipated Power Power dissipation, typ. 2.5 W

Read more less

SIEMENS SIMATIC S7-300 6ES73211BL000AA0 Digital input module SM 321, electrically isolated 32DE, 24V DC, 1 x 40-pole. Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 20.4 VAllowable range, upper limit (DC): 28.8 V Input current from backplane bus DC 5 V, max.: 15mA Power dissipated Power dissipation, typ.: 6.5 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES7193-6BP20-0DA0 SIMATIC ET 200SP, Basic unit BU15-P16+A10+2D, BU type A0, Push-in terminals, with 10 aux. terminals, new load group, WxH: 15 mmx141 mm. General information Product type designation BU type A0Hardware version From FS07 Supply voltage Rated value (DC) 24 VExternal protection of power cables Yes; DC 24 V / 10 A circuit breaker with tripping characteristic type B or C Current capacity for busbar P1 and busbar P2, max. 10 Afor AUX bus, max. 10 Afor process terminals, max. 2 A Hardware configuration Formation of potential groups● New potential group Yes● Potential group continued from the left No Slot● Number of slots 1; Type A0 Potential separation between potential groups Yes Isolation Insulation tested with DC 707 V (Type Test)

Read more less

SIEMENS SIMATIC ET 200SP 6ES7-193-6BP00-0BA0 Basic unit BU15-P16+A0+2B, BU type A0, Push-in terminals, without aux. terminals, bridged to the left, WxH: 15x 117 mm. General information Product type designation: BU type A0Version Hardware: from FS06 Supply voltage Rated value (DC) 24 VExternal protection of power cables Yes; DC 24 V / 10 A thermal magnetic switch with tripping characteristic type B or C Main filter● integrated No Current range for busbar P1 and busbar P2, max. 10 Afor process terminals, max. 2 A

Read more less

SIEMENS SIMATIC PN/PN 6ES71583AD100XA0 Coupler for deterministic data exchange between max. 4 PNControllers per side, also via router, transmission of PROFIsafe, I/O, MSI,MSO and data set communication, redundant power supplyPN connection via BusAdapter SIMATIC (BA), Supplied without bus adapter. General information Product type designation: PN/PN Coupler Possible FW update: YES Product function ● I&M data: Yes; I&M0 ... I&M3● Isochronous operation: No; possible on isochronous bus● Change tool: Yes; Docking Station and Docking Unit● I/O data local coupling: Yes— Number of coupling modules: 16— Number of coupling submodules per module: 4; 1 x Write, 3 x Read● Dataset local coupling: Yes— Number of coupling modules: 16— Number of coupling submodules per module: 4; 1 x Write, 3 x Read— Record length, max.: 4 096 bytes— FIFO depth in Storage mode: 8 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesMains and voltage interruption buffering● Mains/voltage interruption buffering time: 10 ms Input current Current consumption, max.: 360 mA; With 19.2 V input voltage at the right power terminals, incl. 2 BA 2x LC insertedInrush current, max.: 1.6 AI²t: 0.031 A²·sFrom supply voltage 1L+, max.: 320 mA; With input voltage 19.2 V at the left power terminals, incl. 2 BA 2x LC inserted Power dissipated Power dissipation, typ:. 4W; With 24 V input voltage and 2 BA 2x RJ45 inserted. If BusAdapters with optical interface are inserted, for each optical interface there is an additional 750 mW (3 W for with 2 BA 2x LC inserted)

Read more less

SIEMENS SIMATIC ET 200SP 6ES71936AR000AA0 BA 2xRJ45 bus adapter, 2 RJ45 sockets General information Product type designation: BA 2 x RJ45   Interfaces Number of PROFINET interfaces: 1Supports protocol for PROFINET IO● Number of RJ45 ports 2Cable length — Copper conductors 100 m  

Read more less

SIEMENS SIMATIC DP 6ES71513BA230AB0 IM 151-3 PN HF interface module for ET 200S Transmission speed 100 Mbit/s max. 63 peripheral modules Connectable width up to 2m; 2x bus connections via RJ45 incl. closing module. General informationProduct type designation: IM 151-3 PN HF Supply voltage Mains/voltage interruption buffering time: 20 msInput current from supply voltage 1L+, max.: 200 mA Power dissipated Power dissipation, typ.: 3.3 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES7137-6AA01-0BA0 CM PTP communication module for RS-422, RS-485 and RS-232 serial link, Freeport, 3964 (R), USS, MODBUS RTU master, slave, max. 250 kbit/s, suitable for BU type A0, quantity per pack: 1 piece SIMATIC ET 200SP is a scalable and highly flexible distributed I/O system. Thanks to its small overall dimensions it is particularly suitable for installation in small distribution boxes at machine level. The modules can be plugged directly into an ET 200SP CPU or connected via PROFINET or PROFIBUS to a central controller. SIMATIC ET 200SP can be expanded with up to 64 I/O modules, which can be inserted in any combination. The system offers a very wide range of units. Many modules are also available with different performance levels, which greatly improves scalability regarding functionality and price. In addition to modules with standard functionality (ST), modules with an extended set of functions and diagnostics (HF High Feature / HS High Speed) are also available. For price-sensitive applications, basic functionality (BA) modules are available. The advantage of the ET 200SP system is its ease of use, e.g. thanks to the free choice of connection technology to PROFINET via the BusAdapter, tool-free cabling with push-in technology, improved accessibility of the cabling with the new arrangement of the spring openers next to the respective cable openings and the specific diagnostic functions of channel. The possibility of replacing modules and terminal boxes during operation, the so-called "Hot Swapping", ensures the availability and productivity of the machine. The communication modules expand the communication capabilities of the ET 200SP with additional functions or additional interfaces, such as PtP, IO-Link or AS-i. General Information Product type designation: CM PtPFirmware update possible: YesUsable BaseUnits: BU type A0 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VProtection from polarity inversion: Yes Input Current Current consumption (nominal value): 31 mACurrent consumption, max.: 35 mA Dissipated Power Power dissipation, typ. 0.7 W

Read more less

SIEMENS SIMATIC ET 200SP, TM count 1x 24V counting unit, 1 channel for 24 V incremental transducer or pulse generator, 3 DI, 2 DQ, suitable for BU type A0 6ES7138-6AA01-0BA0 General information Product type designation: TM Count 1x24VFirmware version V2.0FW update possible: YesUsable BaseUnits: BU type A0Color code for coding plate a color specification ofmodule: CC00 Supply voltage Rated value (DC): 24 VLoad voltage L+Rated value (DC): 24 VPermitted range, lower limit (DC): 19.2 VPermitted range , upper limit (DC): 28.8 VReverse polarity protection: Yes Power dissipated Power dissipation, typ. 1 W

Read more less

SIEMENS SIMATIC DP (DC 24 V - 21 MA) 6ES7-136-6BA00-0CA0 Electronics module for ET 200SP, F-DI 8x 24VDC HF, 15mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General information Product type designation F-DI 8x24VDC HFUsable BaseUnits BU type A0 Product function● I&M data Yes; I&M0 ... I&M3 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection YesVoltage supply required according to NEC class 2 No Input current Current consumption (nominal value) 75 mA; without loadCurrent consumption, max. 21 mA; from the backplane bus Power Power draw from the backplane bus 70 mW Power dissipated Power dissipation, typ. 4 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES7134-6GF00-0AA1 Analog input module, AI 8XI 2-/4-Wire Basic, suitable for BU type A0, A1, Color code CC01, Diagnostic module, 16 bit. General information Product type designation AI 8xI 2-/4-wire BAHardware version from FS04Firmware version● FW update possible YesUsable BaseUnits BU type A0, A1Color code for specific color coding plate of module CC01 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Input current Current consumption, max. 25mA; without transducer power supply Power dissipated Power dissipation, typ. 0.7W; without transducer power supply voltage

Read more less

SIEMENS SIMATIC ET 200SP   (DC 24 V - 35 mA without load) 6ES71326BF010BA0 Digital output module, DQ 8x 24V DC/0.5A Standard, Source Output (PNP, P-switching) Packaging unit: 1 piece suitable for BU type A0, Color code CC02, substitute value output , Diagnostics module for: Short circuit to L+ and M, wire break, supply voltage. General information:Product type designation: DQ 8x24VDC/0.5A STHardware version: From FS02Firmware version: V0.0Possible FW update: NoUsable BaseUnits: BU type A0Color code for module-specific color coding label: CC02 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YES Input current Current consumption (nominal value): 35 mA; without load Power dissipated Power dissipation, typ.: 1 W

Read more less

SIEMENS SIMATIC DP 6ES7-136-6DC00-0CA0 SIMATIC DP, electronics module ET 200SP, F-DQ 8X24VDC/0.5A PP, width 15mm, up to PL E (ISO 13849) up to SIL 3 (IEC 61508) With the SIMATIC ET 200SP, Siemens offers a distributed, multifunctional I/O system that can be easily put into operation thanks to its space-saving design. It is approved for IP20 protection and designed for installation in a compact distribution box. The system ensures maximum flexibility, allowing modules to be replaced quickly and easily at any time thanks to Multi Hot Swapping. Furthermore, the SIMATIC ET 200SP offers you a wide range of communication channels, both diverse and fast. Thanks to the integration of the IM155-6MF MultiFieldbus interface module, you can always react flexibly and use the optimal protocol for your application, as this function supports different Ethernet protocols. Assembly and service are simplified by a uniform identification system, based on reference identification plates and color-coded pin assignment. Siemens ensures you future-proof systems with the integration of innovative and at the same time long-lasting automation products, in fact as industry experts you are already investing today in the technologies of tomorrow and thus redefining market standards. The continuous availability of data, the flexibility of the application cases and the versatile integration options ensure the excellent performance of the ET 200 products. The scalable and cost-optimized configuration of an ET 200SP station is ensured by the wide range of I/O modules. In addition to digital and analog input and output modules, fail-safe variants are also available for applications up to SIL 3 / PLe. This also applies to integrated motor starters, which are suitable for motors up to 5.5 kW. Energy meters for measuring and analyzing energy consumption, IO-Link master (V1.1.) as well as many other communication and technology modules allow you to adapt the system to every automation task. The accessories available for ET 200SP range from colored and non-coloured reference identification plates to marking labels for individual modules and ensure maximum visibility in the electrical panel. General Information Product type designation: F-DQ 8x24 VDC/0.5 A PP HFFirmware update possible: YesUsable BaseUnits: BU type A0Color code for coding plate a module specification colors: CC02 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesVoltage supply required according to NEC class 2: No Input Current Current consumption (nominal value): 75 mA; without loadCurrent consumption, max.: 21 mA; from the backplane bus Output voltage / header Rated value (DC): 24 V PowerPower draw from backplane bus: 70 mW Power dissipationPower dissipation, typ. 3 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES7131-6BH01-0BA0 Digital input module, DI 16x 24V DC Standard, Input type 3 (IEC 61131), Sink Input, (PNP, read on P). Packaging unit: 1 piece suitable for BU type A0, Color code CC00, Input delay 0.05..20ms; Diagnostics module for: wire break, supply voltage General Information: Product type designation: DI 16x24VDC STHardware version: From FS02Firmware version: V0.0Possible FW update: NoUsable BaseUnits: BU type A0Color code for module-specific color coding plate: CC00 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Input Current Current consumption, max:. 90 mA

Read more less

SIEMENS SITOP PSU300S 40A  SIEMENS SITOP PSU300S STABILIZED POWER SUPPLY  6EP1437-2BA20 *Ex approval no longer available* The three-phase SITOP smart are the universal and high-performance standard power supplies for machine and plant construction. Despite their compact design, they have an excellent overload characteristic: Thanks to the 150% Extra Power, loads with high current consumption can be switched on without any problem and the continuous overload capability of 120% offers power reserves for possible expansions. The high efficiency guarantees low energy consumption and reduced heat generation in the electrical panel. To further increase the availability of 24 V, SITOP smart power supplies can be combined with buffer, DC-USV, redundancy and selective modules. Regardless of the industry and requirements, Siemens offers reliable and efficient power supplies for every installation. Type of supply voltage: ACOutput voltage 1: 24...24 VMax. Output current 1: 40 AAdjustable output voltage: yesOutput voltage rating 1: 24 VOutput current rating 1: 40 AShort-proof circuit: yesRated AC supply voltage 50 Hz: 400...400 VNominal AC supply voltage 60 Hz: 500...500 VStabilised output voltage: yesPower consumption: 89 VAOutput power: 960 WStabilised: yesType of electrical connection: Screw connectionPossibilities rail mounting: yesWall mountable: noSuitable for modular mounting: yesRecessing width: 145 mmRecessing height: 225 mmDirect mounting possible: noWidth: 145 mmHeight: 145 mmDepth: 150 mmProtection degree (IP): IP20

Read more less