FREQUENCY CONVERTERS

Schneider Electric LUCA1XBStandard TeSys U control unit to insert into a LUB12 or LUB32 power base to form a TeSys U starter controller, for 3-phase motor applications up to 0.25kW at 400V . Provides complete protection for motors with rated current Ir 0.35-1.4A (Ir adjustable), overload trip class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). Control unit to be supplied with AC 24V through the control terminal block located in the power base. Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

Read more less

Schneider Electric LUCA05BLControl unit for starter. To be chosen based on the control voltage, the power of the motor to be protected and the type of protection desired. TO USE IT YOU NEED ABBINHALE IT TO A POWER BASE

Read more less

Schneider Electric LUCA12BLControl unit for starter. To be chosen based on the control voltage, the power of the motor to be protected and the type of protection desired. TO USE IT YOU NEED ABBINHALE IT TO A POWER BASE

Read more less

Schneider Electric LUCA12FUControl unit for starter. To be chosen based on the control voltage, the power of the motor to be protected and the type of protection desired. TO USE IT YOU NEED ABBINHALE IT TO A POWER BASE

Read more less

Schneider Electric LZ2H2X4BD0.75KW 24 vdc screw contactor. range: TeSys - product name: TeSys H - abbreviated name: LZ2H - number of poles: 3P - Rated operational current [Ie]: 2.4 A at 500 V AC-51, 2.4 A at 500 V AC-51 side-by-side mounting, 2.4 A at 500 V AC-53A, 2.4 A at 500 V AC-53A side-by-side mounting - motor power in kW: 0.37 kW at 220 V AC with power factor : 0.65, 0.37 kW at 230 V AC with power factor : 0.65, 0.75 kW at 380 V AC with power factor : 0.65, 0.75 kW at 400 V AC with power factor : 0.65, 0.75 kW at 415 V ACwith power factor : 0.65, 0.75 kW at 440 V AC with power factor : 0.65, 1.1 kW at 500 V AC with power factor : 0.65 - motor power in hp: 0.5 hp at 200 V AC, 0.5 hp at 230 V AC, 1 hp at 460 V AC. Benefits: By integrating all these functions, the TeSysH starter allows you to reduce space in control panels and improve installation and diagnostic efficiency. This ultra-compact solution, compatible with all other Schneider Electric products, guarantees: . • Reduction of space up to 75% in paintings. • 60% reduction in installation time, thanks to having all the functions integrated into a single compact product. • Achievement of the SIL3/PLe safety level. • High electrical durability (depending on the application, it can last up to 10 times longer than a standard electromechanical starter) which makes it reliable even in contexts requiring high performance.... Applications: TeSys H can be used in a variety of applications where small spaces, two-way travel, safety functions and high electrical and mechanical durability are required, such as: Light transport systems with constant speed (logistics, packaging & labeling etc.), Machines for the food sector, Machines for processing of materials (material working), strapping machines, car wash machines, industrial dishwashers, automated agricultural machines and systems, industrial doors and greenhouses..

Read more less

Schneider Electric LUCA12BControl unit for starter. To be chosen based on the control voltage, the power of the motor to be protected and the type of protection desired. TO USE IT YOU NEED ABBINHALE IT TO A POWER BASE

Read more less

Siemens 3RM10071AA04direct starter, 3RM1, 500 V, 0.55 ... 3 kW, 1.6 ... 7 A, 24 V DC, screw terminal SIRIUS 3RM1 direct starter for the functional control of three-phase motors.\nSmall design width, multifunctionality, with electronic overload protection, long service life and energy-efficient hybrid switching technology, small variety of devices thanks to large adjustment range, simple installation thanks to reduced wiring effort, quick diagnostics via LED indicators, innovative housing concept e.g. with labeled cover doors and removable connection terminals.\nCan be supplied as a direct or reversing starter, optionally with ATEX certification and safety switch-off, with different motor current ranges, types of supply voltage and connection techniques.\nNumerous accessories like for example equipment connectors, fuse module, power system or sealable covers complete the system.\nStarting in small spaces - SIRIUS 3RM1 motor starters.

Read more less

Schneider Electric LUCA05FUControl unit for starter. To be chosen based on the control voltage, the power of the motor to be protected and the type of protection desired. TO USE IT YOU NEED ABBINHALE IT TO A POWER BASE

Read more less

Schneider Electric LUCA05BStandard TeSys U control unit to insert into a LUB12 or LUB32 power base to form a TeSys U starter controller, for 3-phase motor applications up to 1.5kW at 400V . Provides complete protection for motors with rated current Ir 1.25-5A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection equipment only). Control unit to be supplied with AC 24V through the control terminal block located in the power base. Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

Read more less

Siemens 3RM10021AA04direct starter, 3RM1, 500 V, 0.09 ... 0.75 kW, 0.4 ... 2 A, 24 V DC, screw terminal Direct starter SIRIUS 3RM1 for the functional control of three-phase motors.\nSmall design width, multifunctionality, with electronic overload protection, long service life and energy-efficient hybrid switching technology, reduced device variety thanks to large control range, simple installation thanks to low cabling effort, quick diagnostics via LED indicators, innovative housing concept e.g. with labeled cover doors and removable connection terminals.\nCan be supplied as a direct or reversing starter, optionally with ATEX certification and safety switch-off, with different motor current ranges, types of supply voltage and connection techniques.\nNumerous accessories like for example equipment connectors, fuse module, power system or sealable covers complete the system.\nStarting in small spaces - SIRIUS 3RM1 motor starters.

Read more less

Schneider Electric LUB32Power base for starter, it is independent of the control voltage and motor power. It integrates the switch function with a breaking capacity of 50kA at 400V, total coordination (service continuity) and the switching function. TO BE USED IT MUST BE ABBINNECTED TO A CONTROL UNIT

Read more less

Phoenix Contact 2900414Saving cabling. Long duration. Space saving. Wear-free switching.

Read more less

Siemens 6SL32550AA004HA1handheld for Intelligent Operator Panel IOP-2 includes IOP-2, portable case power supply (International) rechargeable batteries (4xAA) RS-232 connection cable (3m) and cable USB (1m) note: KC certified note: KC certified Handheld for intelligent control panel for direct connection to the converter. SINAMICS Intelligent Operator Panel (IOP-2). Control, supervision, commissioning, diagnostics, local services A handheld version is available for direct and wired use of the Intelligent Operator Panel (IOP-2). This includes, in addition to the IOP-2, a case with batteries, charger and RS232 connection cable. With fully charged batteries the operating autonomy is approximately 8 hours. To connect the IOP-2 Handheld to the SINAMICS G110D, SINAMICS G120D, SINAMICS G110M or SINAMICS G120X, the RS232 connection cable with optical interface is also required. The IOP-2 is upgradeable and expandable via the integrated USB interface. You can transfer data from the PC to the IOP-2 to support future drive types. The USB interface also offers the ability to load additional languages ​​and wizards as they become available in the future, as well as perform firmware updates for the IOP-2. The charger is supplied with adapters for Europe, USA and UK. SINAMICS - the drive for me.

Read more less

Rockwell Automation 20-750-ENC-1Accessories and spare parts for Rockwell Automation frequency converter series/model POWERFLEX 750 ENCODER OPTION MODULE

Read more less

Eaton 186946Keyboard with LED display for DA1 and DC1 variable frequency drives.

Read more less

Lovato VLBXL03LOGICAL UNIT WITH PROFINET FOR VLB3...

Read more less

Siemens 6SL32550AA004JA2SINAMICS G Intelligent Operator Panel IOP-2 for SINAMICS G120, G120P G110M, G110D, G120D, G120C ET 200PRO FC-2 language support: German, English, French Italian, Spanish Portuguese, Dutch Swedish, Russian Czech, Polish Turkish, Finnish Chinese simplified environmental class during operation: chemically harmful substances class 3C3 according to IEC 60721-3-3: 2002 Intelligent control panel for direct connection to the converter. SINAMICS Intelligent Operator Panel (IOP-2). Local control, supervision, commissioning, diagnostics, service The flat IOP-2 Intelligent Operator Panel enables rapid local commissioning, error diagnostics and intuitive control of the SINAMICS G converter series, while at the same time facilitating Adaptation of settings during operation. The innovative centralized multifunction sensor control panel helps the user select settings. If you wish to use the IOP-2 there are three variants available: Direct connection to the control unit of the converter, door mounting for use outside the cabinet and the use of the IOP Handheld when control can only take place via cable in hard-to-reach places The IOP-2 is an additional option for the SINAMICS G120, G120C, G120P, G120X, G110D, G120D, G110M converter series, as well as for SIMATIC ET 200pro FC-2. SINAMICS - the drive for me.

Read more less

Siemens 6SL32550VA005AA0SINAMICS V20 Smart Access Web Server Module Web server-based control panel with wireless client connection SINAMICS V20 Smart Access Module for mobile commissioning, diagnostics, service. The optional SINAMICS V20 Smart Access Module can simply be inserted onto the inverter. Thanks to commissioning and control via smartphone, tablet or laptop, it also makes operating the SINAMICS V20 frequency inverter even easier and more convenient. SINAMICS - the drive for me.

Read more less

Schneider Electric VW3A1104R30Remote mounting cable with 2 RJ45 connectors

Read more less

Siemens 6SL32604NA001VB0 Prefabricated setpoint cable for connection to SINAMICS V90 with Controller 50x0.08 Tmax.= 13.7 mm Length (m)=1 m SINAMICS control/setpoint cable for the SINAMICS V90 frequency converter. The setpoint signal cable has a 50-pin plug connector at both ends and a separate terminal block on the controller side. The cable is available in lengths between 0.5 m and 1 m. SINAMICS - the drive for me.

Read more less

Siemens 6SL32550AA005AA0SINAMICS G120 Web Server Module Operating unit based on Web server with wireless client connection. SINAMICS G120 Smart Access Module.Mobile. Intelligent. Faster. The SINAMICS G120 Smart Access Module allows you to connect mobile devices (smartphones, tablets, laptops) via Wi-Fi with the SINAMICS G120, G120C, G120X and G120P converter series. The result is a powerful tool with numerous functions for wireless commissioning, diagnostics and service. The module is set up in a few steps. Thanks to the Web server function, it requires no installation or download of additional software. A normal web browser and a common operating system are sufficient. The user interface of the SINAMICS G120 Smart Access Module is structured and usable in a simple and intuitive way. The Smart Access Module is available as an additional option for the converter series SINAMICS G120C, SINAMICS G120X, SINAMICS G120 with Control Unit CU230P-2 or CU240E-2 as well as SINAMICS G120P with CU230P-2. SINAMICS - the drive for me.

Read more less

Siemens 6SL32550VA004BA1SINAMICS V20 BOP dimensions: 76x85x30 (WxHxD) Basic control panel for direct connection SINAMICS Basic Operator Panel (BOP) for SINAMICS V20. Local control, supervision, commissioning, diagnostics Navigating the menus of the Basic Operator Panel BOP facilitates local commissioning of the SINAMICS V20 converter. SINAMICS - the drive for me.

Read more less

Schneider Electric VW3A8306D30The RS 485 cable set allows the integration of the product into the serial Modbus connection. It has a length of 3 m. It is equipped with 1 RJ45 and free wires at the other end.

Read more less

Siemens 6SL32030BB218VA1SINAMICS V90/S210 Line Filter category C2 for 1 AC 200 ... 240V, 18 A dimension 62x155x53 (WxHxD)

Read more less