Siemens 6ES71971LB000XA0 SIMATIC S7, Y-Coupler for the creation of a Y-Link for redundant controllers Technical data Supply voltageDesign of supply voltage    via bus modulePermitted range, lower limit (DC)    20.4 VPermitted range , upper limit (DC)    28.8 VInput currentCurrent consumption, max.    300 mAPower dissipationPower dissipation, typ.    1 WInterfacesPROFIBUS DPCharacteristics of the lower-level DP master system— Transmission rate, max.    12 Mbit/s; 45.45 kbit/s ... 12 Mbit/s— Termination of the subordinate DP master system    active bus terminating resistor (Bus Terminator)— Use of OLM/OBT    Yes— Use of Repeater RS ​​485, max.    9— Number of DP slaves, max.    31; 64 when using RS 485 Repeater or OLM / OBTRequirements for the DP master system— Length of the parameterization telegram    244 bytesProtocolsPROFIBUS DP    YesAS-Interface    NoAlarms/diagnostics/status informationStatus display    NoAlarms    NoDiagnostic function    Yes

Read more less

Phoenix Contact 2688530PROFIBUS connection via 9-pin D-SUB female connector. Galvanic separation between PROFIBUS interface and logic. Rotary coding switch for setting the PROFIBUS address. DP/V1 for Class 1 and Class 2 masters. PROFIBUS data transmission speed from 9.6 kBit/s to 12 Mbit/s. Dynamic configuration supported. I&M functions. Firmware update. Typical Axioline F local bus cycle time approximately 10 μs.

Read more less

Siemens 6ES71376CA000BU0SIMATIC ET 200SP, CM 1 x DALI, DALI master module, integrated DALI bus 160 mA power supply, up to 64 operating devices, 63 control devices, color coded CC20, suitable for BU type U0 SIMATIC ET 200SP is a scalable and highly flexible distributed I/O system. Thanks to its small overall dimensions it is particularly suitable for installation in small distribution boxes at machine level. The modules can be plugged directly into an ET 200SP CPU or connected via PROFINET or PROFIBUS to a central controller. SIMATIC ET 200SP can be expanded with up to 64 I/O modules, which can be inserted in any combination. The system offers a very wide range of units. Many modules are also available with different performance levels, which greatly improves scalability regarding functionality and price. In addition to modules with standard functionality (ST), modules with an expanded function set and diagnostics (HF High Feature / HS High Speed) are also available. For price-sensitive applications, basic functionality (BA) modules are available. The advantage of the ET 200SP system is its ease of use, e.g. thanks to the free choice of connection technology to PROFINET via the BusAdapter, tool-free cabling with push-in technology, improved accessibility of the cabling with the new arrangement of the spring openers next to the respective cable openings and specific diagnostic functions of channel. The possibility of replacing modules and terminal boxes during operation, the so-called Hot Swapping, ensures the availability and productivity of the machine. Communication module for bus lighting control according to DALI standard

Read more less

Siemens 6ES71531AA030XB0SIMATIC DP, IM 153-1 interface, for ET 200M, for max. 8 S7-300 units

Read more less

Siemens 6ES71556BA010CN0SIMATIC ET 200SP, PROFIBUS IM Bundle, IM 155-6DP HF, max. 32 peripheral modules and 16 ET 200AL modules, Multi Hot Swap, the bundle includes: interface module (6ES7155-6BU01-0CN0), server module (6ES7193-6PA00-0AA0), PROFIBUS connector (6ES7972-0BB70-0XA0) SIMATIC ET 200SP is a scalable and highly flexible distributed I/O system. Thanks to its small overall dimensions it is particularly suitable for installation in small distribution boxes at machine level. The modules can be plugged directly into an ET 200SP CPU or connected via PROFINET or PROFIBUS to a central controller. SIMATIC ET 200SP can be expanded with up to 64 I/O modules, which can be inserted in any combination. The system offers a very wide range of modules. Many modules are also available with different performance levels, which greatly improves scalability regarding functionality and price. In addition to modules with standard functionality (ST), modules with an expanded function set and diagnostics (HF High Feature / HS High Speed) are also available. For price-sensitive applications, basic functionality (BA) modules are available. The advantage of the ET 200SP system is its ease of use, e.g. thanks to the free choice of connection technology to PROFINET via the BusAdapter, tool-free cabling with push-in technology, improved accessibility of the cabling with the new arrangement of the spring openers next to the respective cable openings and specific diagnostic functions of channel. The possibility of replacing modules and terminal boxes during operation, the so-called Hot Swapping, ensures the availability and productivity of the machine. The scalable and cost-optimised configuration of an ET 200SP station is ensured by the wide range of I/O modules. In addition to digital and analog input and output modules, fail-safe variants are also available for applications up to SIL 3 / PLe. This also applies to integrated motor starters, which are suitable for motors up to 5.5 kW. Energy meters for measuring and analyzing energy consumption, IO-Link master (V1.1.) as well as many other communication and technology modules enable the system to be adapted to every automation task.

Read more less

Siemens 6ES79720AA020XA0SIMATIC DP, Repeater RS-485 for connecting PROFIBUS/MPI bus systems with max. 31 knots max. transmission speed 12 Mbit/s, protection class IP20 improved user handling Accessories for SIMATIC DP

Read more less

Siemens 6ES71571AB000AB0SIMATIC ET 200, PROFINET interface module IM 157-1 PN, degree of protection IP67 SIMATIC ET 200 AL is an IO system in block design with high IP65/67 protection rating, particularly compact design as well as reduced size and weight. It is especially designed for distributed control electronics in confined spaces as well as in motion and is configured and commissioned quickly and conveniently via the TIA Portal. Standard modules can be deactivated for safety-oriented groups. The I/O modules represent the interface of the SIMATIC ET 200AL to the process. The ET 200AL is connected to the bus system via the interface module, which can optionally be a PROFINET or PROFIBUS interface module.

Read more less

Siemens 6ES71555BA000AB0SIMATIC ET 200MP. PROFIBUS interface IM 155-5 DP ST for max. 12 S7-1500 units incl. PROFIBUS connector (6ES7972-0BB70-0XA0) SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The interface modules connect the SIMATIC ET 200MP to PROFINET or PROFIBUS and exchange data between the higher-level controller and the I/O modules. With the PROFIBUS interface module, the ET 200MP can also be integrated into existing systems without any problems.

Read more less

Phoenix Contact 2403869Firmware update. Typical Axioline F local bus cycle time approximately 10 μs.

Read more less

Siemens 6ES71556AA010BN0SIMATIC ET 200SP, PROFINET IM Bundle, IM 155-6PN ST, max. 32 I/O modules and 16 ET 200AL modules, single hot swap Bundle consisting of: Interface module (6ES7155-6AU01-0BN0), server module (6ES7193-6PA00-0AA0), BusAdapter BA 2xRJ45 (6ES7193-6AR00-0AA0) SIMATIC ET 200SP is a scalable and highly flexible distributed I/O system. Thanks to its small overall dimensions it is particularly suitable for installation in small distribution boxes at machine level. The modules can be plugged directly into an ET 200SP CPU or connected via PROFINET or PROFIBUS to a central controller. SIMATIC ET 200SP can be expanded with up to 64 I/O modules, which can be inserted in any combination. The system offers a very wide range of units. Many modules are also available with different performance levels, which greatly improves scalability regarding functionality and price. In addition to modules with standard functionality (ST), modules with an expanded function set and diagnostics (HF High Feature / HS High Speed) are also available. For price-sensitive applications, basic functionality (BA) modules are available. The advantage of the ET 200SP system is its ease of use, e.g. thanks to the free choice of connection technology to PROFINET via the BusAdapter, tool-free cabling with push-in technology, improved accessibility of the cabling with the new arrangement of the spring openers next to the respective cable openings and specific diagnostic functions of channel. The possibility of replacing modules and terminal boxes during operation, the so-called Hot Swapping, ensures the availability and productivity of the machine. The scalable and cost-optimised configuration of an ET 200SP station is ensured by the wide range of I/O modules. In addition to digital and analog input and output modules, fail-safe variants are also available for applications up to SIL 3 / PLe. This also applies to integrated motor starters, which are suitable for motors up to 5.5 kW. Energy meters for measuring and analyzing energy consumption, IO-Link master (V1.1.) as well as many other communication and technology modules allow the system to be adapted to every automation task.

Read more less

Siemens Simatic DP, electronics module for ET 200S, 2 AO I 6ES71354GB010AB0 SIMATIC DP, electronics module for ET 200S, 2 AO I Width 15mm, +/-20 mA; 13 bit+sign, 4..20mA; 13 bit Cycle time less than 1 ms with SF LED General information: Product function● Isochronous operation NoSupply voltageLoad voltage L+ ● Rated value (DC) 24 V; from Power module● Reverse polarity protection Yes Input currentfrom load voltage L+ (without load), max. 150 mAfrom backplane bus DC 3.3 V, max. 10 mA Power dissipationPower dissipation, max. 2 WAddress area Address space per module● Address space per module, max. 4 bytes Analog outputsNumber of analog outputs 2Current output, no-load operating voltage, max. 18 VCycle time (all channels), max. 1.5 msOutput ranges, current● -20 mA ... +20 mA Yes● 4 mA ... 20 mA YesConnection of actuators● for current output two-wire connection Yes● for current output four-wire connection NoLoad resistance (in nominal output range)● for current outputs, max. 500 Ω● for current outputs, inductive load, max. 1 mH Destructive limit for voltages and currents supplied from outside● Voltages at the outputs towards MANA 15 V; max. 15 V permanent, 75 V for max. 1 s (pulse/period ratio 1:20)● current / on the analog outputs / as limit ofdestruction against externally applied voltage / max.admissible 50 mA; DC Cable length● with shield, max. 200 m Analog value generation for outputsIntegration and conversion time / resolution per channel● Resolution with overrange (bit incl. sign), max. 14 bits; 4 ... 20 mA: 13 bit, ±20 mA: 14 bit

Read more less

SIEMENS SIMATIC ET 200SP 6ES71556BA010CN0 PROFIBUS IM bundle, IM 155-6DP HF, max. 32 peripheral modules and 16 ET 200AL modules, Multi Hot Swap, the Bundle includes: interface module (6ES7155-6BU01-0CN0), Server module (6ES7193-6PA00-0AA0), PROFIBUS connector (6ES7972-0BB70-0XA0. General informationProduct type designation: IM 155-6 DP HFHardware version: From FS02Firmware version: V4.2Possible FW update: Yes Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesShort-circuit protection: YesMains/voltage interruption buffering time: 10 msInput current Current consumption, max .: 335 mAInrush current, max.: 1.6 AI²t: 0.038 A²·s Power Active power consumption, typ.: 1.5 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES71556AU010BN0  PROFINET interface module IM 155-6PN Standard, max. 32 I/O modules, and 16 ET 200AL modules, single hot swap incl. server module (6ES7193-6PA00-0AA0. General informationProduct type designation: IM 155-6 PN STHardware version: From FS03Firmware version: V4.2 ● Possible FW update: YesProduct function● I&M data: Yes; I&M0 ... I&M3● Replacing a module during operation (Hot Swapping): Yes; Single Hot Swapping● Isochronous operation: NoEngineering with● STEP 7 TIA Portal configurable/integrated from version: V14● STEP 7 configurable/integrated from version: V5. 5 SP4● PROFINET from GSD version/revision: GSD GSDML V2.35 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesShort-circuit protection: YesMains and voltage interruption buffering● Mains/voltage interruption buffering time: 10 ms Input current Current consumption (nominal value): 450 mACurrent consumption, max.: 550 mAInrush current, max.: 3.7 AI²t: 0.09 A²·s Power dissipated Power dissipation, typ.: 1.9 W

Read more less

SIEMENS SIMATIC ET 200SP 6ES71556AU010CN0 PROFINET, 2-port interface module IM 155-6PN/2 High Feature, 1 slot for BusAdapter, max. 64 I/O modules and 16 ET 200AL modules, S2 redundancy, multi hot swap, 0.25 ms, isochronous operation, optional PN strain relief, incl. server module. General informationProduct type designation: IM 155-6 PN/2 HFHardware version: From FS02Firmware version: V4.2● Possible FW update: Yes Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Short circuit protection: YES Input current Current consumption, max.: 700 mAInrush current, max.: 4.5 AI²t: 0.25 A²·s   Power dissipated Power dissipation, typ.: 2.4 W

Read more less

SIEMENS SIMATIC PN/PN 6ES71583AD100XA0 Coupler for deterministic data exchange between max. 4 PNControllers per side, also via router, transmission of PROFIsafe, I/O, MSI,MSO and data set communication, redundant power supplyPN connection via BusAdapter SIMATIC (BA), Supplied without bus adapter. General information Product type designation: PN/PN Coupler Possible FW update: YES Product function ● I&M data: Yes; I&M0 ... I&M3● Isochronous operation: No; possible on isochronous bus● Change tool: Yes; Docking Station and Docking Unit● I/O data local coupling: Yes— Number of coupling modules: 16— Number of coupling submodules per module: 4; 1 x Write, 3 x Read● Dataset local coupling: Yes— Number of coupling modules: 16— Number of coupling submodules per module: 4; 1 x Write, 3 x Read— Record length, max.: 4 096 bytes— FIFO depth in Storage mode: 8 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesMains and voltage interruption buffering● Mains/voltage interruption buffering time: 10 ms Input current Current consumption, max.: 360 mA; With 19.2 V input voltage at the right power terminals, incl. 2 BA 2x LC insertedInrush current, max.: 1.6 AI²t: 0.031 A²·sFrom supply voltage 1L+, max.: 320 mA; With input voltage 19.2 V at the left power terminals, incl. 2 BA 2x LC inserted Power dissipated Power dissipation, typ:. 4W; With 24 V input voltage and 2 BA 2x RJ45 inserted. If BusAdapters with optical interface are inserted, for each optical interface there is an additional 750 mW (3 W for with 2 BA 2x LC inserted)

Read more less

Siemens simatic ET 200SP 6ES71556AA010BN0 PROFINET IM bundle, IM 155-6PN ST, max. 32 I/O modules and 16 ET 200AL modules, single Hot Swap Bundle consisting of: Interface module (6ES7155-6AU01-0BN0), server module (6ES7193-6PA00-0AA0), 2xRJ45 BA BusAdapter (6ES7193-6AR00-0AA0). General information Product type designation IM155-6PN ST, including BusAdapter BA 2x RJ45Hardware version From FS03Firmware version V4.2FW update possible Yes Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection YesShort-circuit protection Yes Input current Current consumption (nominal value) 450 mACurrent consumption, max. 550 mAInrush current, max. 3.7 AI²t 0.09 A²·s

Read more less

SIEMENS SIMATIC ET 200SP 6ES71376AA010BA0 CM PTP communication module for RS-422, RS-485 and RS-232 serial link, Freeport, 3964 (R), USS, MODBUS RTU master, slave, max. 250 kbit/s, suitable for BU type A0, pack quantity: 1 piece SIMATIC ET 200SP is a scalable and highly flexible distributed I/O system. Thanks to its small overall dimensions it is particularly suitable for installation in small distribution boxes at machine level. The modules can be plugged directly into an ET 200SP CPU or connected via PROFINET or PROFIBUS to a central controller. SIMATIC ET 200SP can be expanded with up to 64 I/O modules, which can be inserted in any combination. The system offers a very wide range of units. Many modules are also available with different performance levels, which greatly improves scalability regarding functionality and price. In addition to modules with standard functionality (ST), modules with an extended set of functions and diagnostics (HF High Feature / HS High Speed) are also available. For price-sensitive applications, basic functionality (BA) modules are available. The advantage of the ET 200SP system is its ease of use, e.g. thanks to the free choice of connection technology to PROFINET via the BusAdapter, tool-free cabling with push-in technology, improved accessibility of the cabling with the new arrangement of the spring openers next to the respective cable openings and the specific diagnostic functions of channel. The possibility of replacing modules and terminal boxes during operation, the so-called "Hot Swapping", ensures the availability and productivity of the machine. The communication modules expand the communication capabilities of the ET 200SP with additional functions or additional interfaces, e.g. PtP, IO-Link or AS-i. General Information Product type designation: CM PtPFirmware update possible: YesUsable BaseUnits: BU type A0 Supply Voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VProtection from polarity inversion: Yes Input Current Current consumption (nominal value): 31 mACurrent consumption, max.: 35 mA Dissipated Power Power dissipation, typ. 0.7 W  

Read more less

SIEMENS SIMATIC ET 200SP 6ES71556AR000AN0 SIMATIC ET 200SP, PROFINET interface module IM 155-6PN Basic, max. 12 I/O modules, 2x built-in RJ45 sockets incl. server module. General information: Product type designation IM 155-6 PN BAHardware version from FS04Firmware version● FW update possible Yes Product function● I&M data Yes; I&M0 ... I&M3● Replacing a module during operation (Hot Swapping)Yes; Single Hot Swapping● Isochronous operation No Engineering with● STEP 7 TIA Portal configurable/integrated fromversion V13 SP1● STEP 7 configurable/integrated from version V5. 5 SP4● PROFINET from GSD version/GSD revision GSDML V2.31 Configuration control via data set Yes Supply voltageRated value (DC) 24 VPermissible range, lower limit (DC) 19.2 VPermissible range, limit upper (DC) 28.8 VReverse polarity protection YesShort circuit protection Yes Mains and voltage interruption buffering● Mains/voltage interruption buffering time 5 ms Input currentCurrent consumption, max. 300 m I²t 0.09 A²·s Power dissipationPower dissipation, typ. 1.8 W Address spaceAddress space per module● Address space per module, max. 32 bytes; resp. for input and output dataAddress space per station● Address space per station, max. 32 bytes Hardware configurationMounting frame● Max. of usable ET 200SP modules 12● Max. number of usable ET 200AL modules 0

Read more less

SIEMENS SIMATIC ET 200SP 6ES71376BD000BA0 SIMATIC ET 200SP, CM 4xIO-Link ST communication module Master IO‑Link V1.1 General informationProduct type designation CM 4xIO-Link STHardware version FS20Firmware version V2.2.2● FW update possible YesUsable BaseUnits BU type A0Color code for module-specific color coding label CC04Product function● I&M data Yes; I&M0 ... I&M3● Isochronous operation No; Only for PROFINET and configuration as version with FW V2.0 or V2.1Engineering with● STEP 7 TIA Portal configurable/integrated from versionFrom STEP 7 V15● STEP 7 configurable/integrated from version From STEP 7 V5.5● PROFIBUS from version GSD/GSD revision Each one GSD file from revision 3 and 5● PROFINET from version GSD/GSD revision GSDML V2.3Supply voltageRated value (DC) 24 VPermitted range, lower limit (DC) 19.2 V; 20.5 V when using IO-Link, since the supply voltage for IO-Link devices on the master must be at least 20 V.Permitted range, upper limit (DC) 28.8 VRequired voltage supply according to NEC class 2 NoInput currentCurrent consumption, max. 45mA; no loadTransducer power supplyNumber of outputs 4Output current● Rated value 700 mA; per channel24 V transducer supply● Short-circuit protection Yes● Output current, max. 2.1 APower dissipationPower dissipation, typ. 1 WHardware configurationAutomatic coding Yes● H-type electronic coding element YesDigital outputsCable length● without shielding, max. 20m; also applies to shielded cables

Read more less

Siemens simatic DP, ET 200S electronic module 6ES71344NB510AB0 SIMATIC DP, electronics module ET 200S: 2AI RTD High Feature, 15mm width, 15 bit+sign accuracy +/-0.1%, for 2/3/4-wire sensors, with internal compensation of cable resistance, with LED SF. General informationProduct function● Isochronous operation NoSupply voltageLoad voltage L+● Rated value (DC) 24 V; from Power module● Reverse polarity protection YesInput currentfrom load voltage L+ (no load), max. 30 mAfrom backplane bus DC 3.3 V, max. 10 mAPower dissipationPower dissipation, typ. 0.6 WAddress spaceAddress space per module● Address space per module, max. 4 bytesAnalog inputsNumber of analog inputs 2Permitted input voltage for voltage input (destructivelimit), max.9 VConstant measuring current for resistive transducers, typ. 1.25 mACycle time (all channels), max. Number of active channels per module x basic conversion timeTechnical unit for temperature measurement settable Yes

Read more less