Abb 05165Wiring duct in insulating and shockproof thermoplastic material, self-extinguishing according to UL 94 V0 Standard and resistant to abnormal heat and fire up to 960 °C (glow wire test) according to IEC 60695 Standard -2-11, lead-free, gray color RAL 7030 • Minimum storage/transport temperature -5 °C • Minimum installation and use temperature -15 °C • Maximum use temperature +60 °C • Acid resistant , oils and greases • Absence of burrs, rounded internal edges • New profile of the slats to facilitate opening and closing of the lid and guarantee safer attachment • Prepared for snap attachment on a special accessory suitable for attachment to both rails DIN, both on a bottom plate • The shearing of the slats is carried out with a particular coining process (rounding of the edges) which allows to obtain a channeling absolutely free from burrs and edges • Dimensions and resilience of the slats ensure repeated divarications during the manufacturing phase wiring • Controlled splaying of the sides to ensure perfect sealing of the cover in the vertical sections and in the presence of high temperatures • Double line for preparation for shearing: one at the base of the slats to be able to remove them by flexing them towards the outside and one at the base of the wall to be able to cut the edge when placing two branch ducts • Cable clip templates halfway along the straight section of the slats in ducts with heights of 80 and 100 mm • Lid that can be opened without tools • Mounting on vertical or horizontal surfaces even with the lid at the bottom • Field of application : industrial • Compliance with the RoHS Directive

Read more less

Abb M206573The compact fuse holders of the E 90h series are available in 1P+N in one module and 3P+N in three modules versions and are designed for use with cylindrical gG and aM fuses. The body is made of self-extinguishing thermoplastic materials resistant to high temperatures and the contact pliers are made of silver-plated copper. The E 90h fuse holders can be sealed and padlocked for the safety of operators during maintenance. For simple and quick installation, the E 90h range is compatible with the connection bars, caps and connection terminals of the SN201 series circuit breakers.

Read more less

Abb KV 035 7Lampholders with LED front mounting. Nominal voltage 230 VDC ● Red

Read more less

Abb M296532E 90 50/125 are appropriate fuse holders for protection against overloads and short circuits. They are designed for use with 50 to 125 A cylindrical fuses.

Read more less

Abb EO 606 7Black plastic plate holder (47x30mm) Colour: black.

Read more less

Abb TF427V6Thermal overload relay for AF09 ... AF38 contactors • Application: overload protection, trip class 10, phase failure protection, selectable manual or automatic reset • Description: width 45 mm, sealable control elements

Read more less

Abb 1SAL102617R9901MINICONTACTOR MC1A310AT1 AC 3NO SCREW MINICONTACTOR

Read more less

Abb AF38300011Three-pole contactor with electronic coil for AC/DC control with screw terminals. AF09 ... AF38 contactors are used to control power circuits up to 690 V AC. and 220 V DC The main fields of use are the control of three-phase motors and resistive or slightly inductive loads. AF09 ... AF38 contactors are equipped with an electronic coil that accepts a wide control voltage Uc in. ... Uc max. AF contactors can handle large fluctuations in the supply voltage. A single coil (e.g.: 100...250 V 50/60 Hz - d.c.) can be used for various supply voltages in use throughout the world. AF contactors have built-in surge protection and do not require additional surge protectors.

Read more less

Abb AF09301013Three-pole contactor with electronic coil for AC/DC control with screw terminals. AF09 ... AF38 contactors are used to control power circuits up to 690 V AC. and 220 V DC The main fields of use are the control of three-phase motors and resistive or slightly inductive loads. AF09 ... AF38 contactors are equipped with an electronic coil that accepts a wide control voltage Uc in. ... Uc max. AF contactors can handle large fluctuations in the supply voltage. A single coil (e.g.: 100...250 V 50/60 Hz - d.c.) can be used for various supply voltages in use throughout the world. AF contactors have built-in surge protection and do not require additional surge protectors.

Read more less

Abb AF52300013The AF40 ... AF96 contactors are mainly used for the control of three-phase motors and circuits with power up to 690 VAC. and 220 V DC These contactors have a block design with 3 main poles. – control circuit: AC operation or d.c. with electronic coil interface accepting a wide range of control voltages (e.g. 100...250 V AC and DC), only 4 coils to cover all control voltages between 24...500 V 50/ 60 Hz and 20...500 V DC - can handle large variations in control voltages - low switchgear energy consumption - very distinct closing and opening – built-in surge suppression – additional auxiliary contact blocks with front or side mounting and a wide range of accessories.

Read more less

Abb TF4220Thermal overload relay for AF09 ... AF38 contactors • Application: overload protection, trip class 10, phase failure protection, selectable manual or automatic reset • Description: width 45 mm, sealable control elements

Read more less

Abb TF4210Thermal overload relay for AF09 ... AF38 contactors • Application: overload protection, trip class 10, phase failure protection, selectable manual or automatic reset • Description: width 45 mm, sealable control elements

Read more less

Abb AF16300113Three-pole contactor with electronic coil for AC/DC control with screw terminals. AF09 ... AF38 contactors are used to control power circuits up to 690 V AC. and 220 V DC The main fields of use are the control of three-phase motors and resistive or slightly inductive loads. AF09 ... AF38 contactors are equipped with an electronic coil that accepts a wide control voltage Uc in. ... Uc max. AF contactors can handle large fluctuations in the supply voltage. A single coil (e.g.: 100...250 V 50/60 Hz - d.c.) can be used for various supply voltages in use throughout the world. AF contactors have built-in surge protection and do not require additional surge protectors.

Read more less

Abb AF12301013Three-pole contactor with electronic coil for AC/DC control with screw terminals. AF09 ... AF38 contactors are used to control power circuits up to 690 V AC. and 220 V DC The main fields of use are the control of three-phase motors and resistive or slightly inductive loads. AF09 ... AF38 contactors are equipped with an electronic coil that accepts a wide control voltage Uc in. ... Uc max. AF contactors can handle large fluctuations in the supply voltage. A single coil (e.g.: 100...250 V 50/60 Hz - d.c.) can be used for various supply voltages in use throughout the world. AF contactors have built-in surge protection and do not require additional surge protectors.

Read more less

Abb TF421V7Thermal overload relay for AF09 ... AF38 contactors • Application: overload protection, trip class 10, phase failure protection, selectable manual or automatic reset • Description: width 45 mm, sealable control elements

Read more less

Abb TF422V3Thermal overload relay for AF09 ... AF38 contactors • Application: overload protection, trip class 10, phase failure protection, selectable manual or automatic reset • Description: width 45 mm, sealable control elements

Read more less

Abb AF26400013Quadripole contactor with electronic coil for AC/DC control with screw terminals. The AF09 ... AF38 contactors are used to control power circuits up to 690 V AC. and 440 V DC They are mainly used to control non-inductive or slightly inductive loads. The AF09 ... AF38 contactors are equipped with a coil powered by an electronic interface device. They have built-in surge protection and do not require the use of additional surge protectors.

Read more less

Abb EL 408 1MINI CONTACTOR B6-30-01-80 220-240V 40-450HZ MINI CONTACTOR.

Read more less

Abb TF4229Thermal overload relay for AF09 ... AF38 contactors • Application: overload protection, trip class 10, phase failure protection, selectable manual or automatic reset • Description: width 45 mm, sealable control elements

Read more less

Abb AF16301014Three-pole contactor with electronic coil for AC/DC control with screw terminals. AF09 ... AF38 contactors are used to control power circuits up to 690 V AC. and 220 V DC The main fields of use are the control of three-phase motors and resistive or slightly inductive loads. AF09 ... AF38 contactors are equipped with an electronic coil that accepts a wide control voltage Uc in. ... Uc max. AF contactors can handle large fluctuations in the supply voltage. A single coil (e.g.: 100...250 V 50/60 Hz - d.c.) can be used for various supply voltages in use throughout the world. AF contactors have built-in surge protection and do not require additional surge protectors.

Read more less

Abb AF16400013Quadripole contactor with electronic coil for AC/DC control with screw terminals. The AF09 ... AF38 contactors are used to control power circuits up to 690 V AC. and 440 V DC They are mainly used to control non-inductive or slightly inductive loads. The AF09 ... AF38 contactors are equipped with a coil powered by an electronic interface device. They have built-in surge protection and do not require the use of additional surge protectors.

Read more less

Abb AF30300011Three-pole contactor with electronic coil for AC/DC control with screw terminals. AF09 ... AF38 contactors are used to control power circuits up to 690 V AC. and 220 V DC The main fields of use are the control of three-phase motors and resistive or slightly inductive loads. AF09 ... AF38 contactors are equipped with an electronic coil that accepts a wide control voltage Uc in. ... Uc max. AF contactors can handle large fluctuations in the supply voltage. A single coil (e.g.: 100...250 V 50/60 Hz - d.c.) can be used for various supply voltages in use throughout the world. AF contactors have built-in surge protection and do not require additional surge protectors.

Read more less

Abb EP 884 9MS132 Motor protection switch with thermal and magnetic protection. Motor protection switches (MMS) are protective devices for main circuits. They combine control and protection in a single device. The motor protection switches integrate in the same device the functions of ON/OFF control, automatic protection for overload, short circuit and phase loss in three-phase asynchronous motors. With the use of motor protection switches, the use of fuses for short circuit protection is avoided, thus resulting in both dimensional and economic savings. Motor protectors can be equipped with a wide range of accessories. The BEA connection kits guarantee a safe and rapid connection between the motor protectors and the ABB contactors. Application: • Short circuit protection • Overload protection • Class 10A tripping • Sensitivity to phase loss • Suitable for isolation • Suitable for three-phase and single-phase applications

Read more less

Abb AF190401113The AF190 and AF370 four-pole contactors are mainly used for the control of non-inductive or slightly inductive loads (e.g. resistance furnaces...) and generally for the control of circuits with power up to 1000 V AC These contactors have a compact design with: – 4 main poles, – control circuit: AC operation. or d.c. with electronic coil interface that accepts a wide range of control voltages (e.g. 100...250 V AC and DC) - can handle large variations in control voltages - only 4 coils to cover all voltages control voltages between 24...500 V 50/60 Hz and 20...500 V d.c. - low energy consumption of the switchgear - very distinct closing and opening - they are able to tolerate short voltage drops and voltage dips (SEMI F47 conditions of use on request). – built-in surge suppression – additional auxiliary contact blocks with front or side mounting and a wide range of accessories.

Read more less