Siemens 6ES75221BH010AB0SIMATIC S7-1500, digital output module DQ 16xDC 24V/0.5A HF 16 channels in groups of 8 4A for each group single channel diagnostics substitute value: counter of operating cycles for the connected actuators. The unit supports the safe disconnection of load groups up to SILCL2 according to EN 62061:2005 + A2:2015, and category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ES75221BL100AA0SIMATIC S7-1500, digital output module, DQ32xDC 24V/0.5A BA, 32 channels in groups of 8, 4A per group the module supports shutdown in load group safety up to SILCL2 according to EN 62061:2005 + A2:2015, and category 3 / PL d according to EN ISO 13849-1:2015. supply incl. push-in front connector SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ES75211BL100AA0SIMATIC S7-1500, digital input module, DI 32xDC 24V BA, 32 channels in groups of 16, input delay typ. 3.2 ms, input type 3 (IEC 61131) scope of delivery incl. push-in front connector SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ED10551CB100BA2LOGO! DM16 24 expansion module, SV/I/O: DC 24 V/DC 24 V/trans., 8 DI/8 DO, 4TE for LOGO! 8 The LOGO! expansion modules allow you to create a LOGO! very personalized. A LOGO! basic device 8 can be expanded up to max. 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs. For this purpose, ten different expansion modules are available which allow the addition of digital or analog inputs and outputs with different input voltages.

Read more less

Siemens 6ES75221BH100AA0SIMATIC S7-1500, digital output module, DQ16xDC 24V/0.5A BA, 16 channels in groups of 8, 4A per group, module supports shutdown in load group safety up to SILCL2 according to EN 62061:2005 + A2:2015, and category 3 / PL d according to EN ISO 13849-1:2015. supply incl. push-in front connector SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages as the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ED10551MB000BA2LOGO! DM8 12/24R expansion module, SV/I/O: 12, 24V/12V/24V/relay, 2TE, 4 DE/4 DA for LOGO! 8 The LOGO! expansion modules allow you to create a LOGO! very personalized. A LOGO! basic device 8 can be expanded up to max. 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs. For this purpose, ten different expansion modules are available which allow the addition of digital or analog inputs and outputs with different input voltages.

Read more less

Siemens 6ES72221HF320XB0SIMATIC S7-1200, digital output module SM 1222, 8 DO, Relay 2A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs.

Read more less

Siemens 6ES72221BH320XB0SIMATIC S7-1200, digital output module SM 1222, 16DO, DC 24V, Transistor 0.5A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various options of communication. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs.

Read more less

Siemens 6ES72231PH320XB0SIMATIC S7-1200, digital I/O SM 1223, 8 DI/8 DO, 8 DI DC 24V, Sink/Source, 8 DO, Relay 2A SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various communication options. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs.

Read more less

Siemens 6ES75211BH000AB0SIMATIC S7-1500, DI 16xDC 24V HF digital input module, 16 channels in groups of 16 of which 2 inputs can be used for input delay count 0.05.. 20ms input type 3 (IEC 61131) hardware interrupt diagnostics: front connector (screw terminals or push-in) to be ordered separately SIMATIC ET 200MP is a modular, scalable I/O system for universal use in IP20 and offers the same system advantages of the S7-1500. It enables minimum bus cycle times and very fast response times even for large quantity structures. The distributed I/O system is particularly easy to install, wire and commission. Thanks to the scalable structure, the peripheral station can be customized exactly to the needs on site. The wide range of input/output modules ensures the scalable configuration of an ET 200MP station. Numerous digital and analog input and output modules are available. This ensures the possibility of universal use of the system.

Read more less

Siemens 6ES72211BF320XB0SIMATIC S7-1200, digital input module SM 1221, 8 DI, DC 24V, Sink/Source SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various options of communication. With the input/output modules you can customize the configuration of your SIMATIC S7-1200 (except CPU 1211C) according to your specific needs. Furthermore, a series of digital or analog input and output modules and mixed modules are available, also in fail-safe variants. With these comprehensive construction options, you can save space in the control cabinet and optimize hardware costs.

Read more less

Siemens 6ES72213BD300XB0SIMATIC S7-1200, digital input module SB 1221, 4DI, DC 24V 200kHz, M reading SIMATIC S7-1200 Basic Controller - Flexibility guaranteed by various control options communication. If you need to expand your SIMATIC S7-1200 CPU with only a few inputs or outputs, Signal Boards are a valid alternative to input and output modules. The Signal Boards are inserted directly on the front of the controller (also possible with CPU 1211C) and are available as analogue or digital inputs and outputs and mixed modules. A Communication Board with RS 485 interface is also available. The Signal Boards also allow subsequent expansion of the configuration without requiring additional space in the control cabinet.

Read more less

Siemens 6ED10551HB000BA2LOGO! DM8 24R expansion module, SV/I/O: 24V/24V/relay, 2UM 4 DE/4 DA, AC/DC/NPN Input for LOGO! 8 The LOGO! expansion modules allow you to create a LOGO! very personalized. A LOGO! basic device 8 can be expanded up to max. 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs. For this purpose, ten different expansion modules are available which allow the addition of digital or analog inputs and outputs with different input voltages.

Read more less

Siemens 6ED10551NB100BA2LOGO! DM16 24R expansion module, SV/I/O: DC 24V/DC 24V/relay, 8 DI/8 DO, 4TE for LOGO! 8 The LOGO! expansion modules allow you to create a LOGO! very personalized. A LOGO! basic device 8 can be expanded to max.24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs. For this purpose, ten different expansion modules are available which allow the addition of digital or analog inputs and outputs with different input voltages.

Read more less

Siemens 6ED10551CB000BA2LOGO! DM8 24 Expansion module, SV/I/O: 24V/24V/trans., 4 DE/4 DA for LOGO! 8 The LOGO! expansion modules allow you to create a LOGO! very personalized. A LOGO! basic device 8 can be expanded up to max. 24 digital inputs, 20 digital outputs, 8 analog inputs and 8 analog outputs. For this purpose, ten different expansion modules are available which allow the addition of digital or analog inputs and outputs with different input voltages.

Read more less

SIEMENS SIMATIC S7-1200 6ES72266BA320XB0 SIMATIC S7-1200, digital input module SM 1226, F-DI 16X DC 24V, PROFIsafe, width 70mm, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General information:Product type designation SM 1226, F-DI 16x24 VDC Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) ) 28.8 VVoltage supply required according to NEC class 2 No Input currentfrom backplane bus DC 5 V, max. 155mA; Current consumption (SM bus, DC 5 V): 155 mADigital inputs● from load voltage L+ (without load), max. 130mA; 130 mA + 6 mA / input used + any current usedVsensor1/Vsensor2 Power dissipationPower dissipation, typ. 7 W Digital inputsNumber of inputs 16; 16 (1oo1) or 8 (1oo2); Note: You can individually assign each pair of "a.x" and "b.x" inputs as a single 1oo2 channel or as 2 separate 1oo1channels Number of inputs that can be managed simultaneouslyHorizontal mounting position— up to 50 °C, max. 16; 16 inputs, with horizontal installation at 55 °CVertical mounting position— up to 40 °C, max. 16; 16 inputs, with vertical installation at 45 °C Input voltage● for signal "0" DC -30 V ... DC +5 V● for signal "1" DC 15 V .. DC 30 V Input current● for signal "0", max. (permissible quiescent current) 0.5 mA● for signal "1", typ. 5 mA Input delay (with nominal value of the input voltage)for standard inputs— parameterizable Yes; 0.8 / 1.6 / 3.2 / 6.4 / 12.8 ms Cable length● with shielding, max. 200m; Unshielded with input filter time of 1.6 ms to 12.6 ms (with an input delay of 0.8 ms, shielded cables must be used for digital inputs and sensor power)● without shielding, max. 200m; Shielded with input filter time 0.8 ms to 12.6 ms (with an input delay of 0.8 ms, shielded cables must be used for digital inputs and sensor power) Alarms/diagnostics/status informationDiagnostic display LED● for input status Yes

Read more less

SIEMENS DIGITAL OUTPUT SM 1226, F-DQ 4X 24VDC 6ES7226-6DA32-0XB0 SIMATIC S7-1200, digital output module SM 1226, F-DQ 4x DC 24V 2A, PROFIsafe, width 70mm, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508) . General information:Product type designation SM 1226 F-DQ 4 x 24 VDC Supply voltageAllowable range, lower limit (DC) 20.4 VAllowable range, upper limit (DC) 28.8 VVoltage supply required according to NEC class 2 No Input currentfrom backplane bus DC 5 V, max. 125 mA Digital outputs● from load voltage L+, max. 170 mA Power dissipationPower dissipation, typ. 8 W Digital outputsNumber of outputs 4● in groups of 1Short circuit protection Yes Interrupting capacity of outputs● with ohmic load, max. 30 Hz● with lamp load, max. 10Hz Output voltage ● Nominal value (DC) 24 V Output current● for signal "1" rated value 2 A● for signal "1" permissible range, max. 10 mA ... 2.4 A● for signal "0" residual current, max. Switch on PNP: 0.5 mA, max.; NPN switch: 0.5 mA, max. Cable length● with shielding, max. 200 m● unshielded, max. 200 m Alarms/diagnostics/status informationDiagnostic display LED● for output status Yes Degree of protection and safety classIP protection degree IP20Standards, approvals, certificatesCE mark YescULus Yes FM approval YesMaximum safety class achievable in safety operation● Performance Level according to ISO 13849-1 Category 4, PL e● SIL according to IEC 61508 SIL 3

Read more less

SIEMENS DIGITAL INPUT SM 1221  6ES7221-1BH32-0XB0 Digital input unit SM 1221, 16DI, DC 24V, Sink/Source. General informationProduct type designation SM 1221, DI 16x24 VDCSupply voltageNominal value (DC) 24 VPermissible range, lower limit (DC) 20.4 VPermissible range, upper limit (DC) 28.8 VInput currentfrom backplane bus 5 V DC, max. 130 mA Digital inputs● from load voltage L+ (no load), max. 4 mA; per channeloutput voltage / headertransmitter supply voltage / header● present Yes Power dissipatedPower dissipation, typ. 2.5 WDigital inputs Number of entrances 16● in groups of 4 Input characteristic according to IEC 61131, Type 1 YesNumber of inputs that can be managed simultaneouslyall installation positions— up to 40 °C, max. 16 Horizontal mounting position— up to 40 °C, max. 16— up to 50 °C, max. 16 Vertical mounting position— up to 40 °C, max. 16 Input voltage● Rated value (DC) 24 V● for signal "0" 5 V DC with 1 mA● for signal "1" DC 15 V with 2.5 mA Input current● for signal "0", max. (permissible quiescent current) 1 mA● for signal "1", min. 2.5 mA● for signal "1", typ. 4 mA Delay in entry (with nominal input voltage value)for standard inputs— parameterizable Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of 4 for alarm inputs.

Read more less

SIEMENS S7-1500, DI 32X24VDC HF 6ES7521-1BL00-0AB0 SIMATIC S7-1500, DI 32xDC 24V HF digital input module, 32 channels in groups of 16; of which 2 inputs can be used for counting; input delay 0.05..20ms input type 3 (IEC 61131); diagnostics; Process interrupt: front connector (screw terminals or push-in) to be ordered separately. General informationProduct type designation DI 32x24VDC HFHardware version from FS04Firmware version V2.2.1● FW update possible YesProduct function● I&M data Yes; I&M0 ... I&M3● Isochronous operation Yes● Prioritized start Yes Engineering with● STEP 7 TIA Portal configurable/integrated from theversionV13 SP1 / -● STEP 7 configurable/integrated from version V5.5 SP3 / -● PROFIBUS from version GSD/GSD revision V1.0 / V5.1● PROFINET from GSD version/GSD revision V2.3 / - Operating mode● DI Yes● Counter Yes● Oversampling No● MSI Yes Supply voltageRated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC ) 28.8 VReverse polarity protection Yes Input currentCurrent consumption, max. 40mA; 20 mA each group with DC 24 V supply voltage PowerPower draw from backplane bus 1.1 WPower lossPower loss, typ. 4.2 WDigital inputs Number of inputs 32parameterizable digital inputs YesRead on m/p Read on PInput characteristic according to IEC 61131, Type 3 Yes Digital input functions, parameterizable● Gate start/stop Yes● Digital input freely usable Yes

Read more less

SIEMENS SIMATIC S7-1500 (DC 24 V - 130MA) 6ES75262BF000AB0 Digital output module F, F-DQ 8x 24VDC 2A PPM PROFIsafe; width built 35mm; up to PL E (ISO 13849-1)/ SIL3 (IEC 61508). General informationProduct type designation: F-DQ 8x24VDC/2A PPM Possible FW update: Yes Supply voltage Rated value (DC): 24 V Allowable range, lower limit (DC): 19.2 V Allowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Voltage supply required according to NEC class 2: NOInput current Current consumption (nominal value):Current consumption, max.:130 mA; without load Power loss Power loss, typ.: 11 W

Read more less

SIEMENS SIMATIC S7-1500 6ES75261BH000AB0 Digital input module F, F-DI 16x 24VDC PROFIsafe; width built 35mm; up to PL E (ISO 13849-1)/ SIL 3 (IEC 61508) General informationProduct type designation: F-DI 16x24VDCPossible FW update: Yes Supply voltage Rated value (DC): 24 V Permissible range, lower limit (DC): 19.2 V Permissible range, upper limit (DC): 28, 8 VReverse polarity protection: YesVoltage supply required according to NEC class 2: NOInput current Current consumption (nominal value): 50 mA; without loadCurrent consumption, max.: 60 mA; without loadPower loss Power loss, typ.: 4.6 W

Read more less

Siemens Simatic DP, electronics module for ET 6ES71366DB000CA0 Electronics module for ET 200SP, F-DQ 4x24VDC/2A, 15mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508). General informationProduct type designation: F-DQ 4x24VDC/2A PM HFUsable BaseUnits: BU type A0 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Required voltage supply according to NEC class 2: NOInput current Current consumption (nominal value): 75 mA; without loadCurrent consumption, max.: 21 mA; from the backplane bus Power dissipation Power dissipation, typ.: 4 W

Read more less

Siemens Simatic ET 200SP PLC 6ES7132-6BH01-0BA0 Digital output module, DQ 16x 24V DC/0.5A Standard, Source Output (PNP, P-switching) Packaging unit: 1 piece suitable for BU type A0, Color code CC00, substitute value output , Diagnostics module for: Short circuit to L+ and M, wire break, supply voltage General informationProduct type designation: DQ 16x24VDC/0.5A STHardware version: From FS03Firmware version: V0.0● Possible FW update NoUsable BaseUnits: BU type A0Color code for module-specific color coding label: CC00 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC):: 28.8 VReverse protection polarity: Yes Input current Current consumption, max. 60mA; without load Power dissipated Power dissipation, typ. 1 W

Read more less

Siemens Simatic DP, electronics module for ET  6ES71366BA010CA0 Electronics module for ET 200SP, F-DI 8x 24VDC HF, width 15mm, up to PLe (ISO 13849-1)/ SIL 3 (IEC 61508). General informationProduct type designation: F-DI 8x24VDC HFPossible FW update: SI Usable BaseUnits: BU type A0 Color code for module-specific color coding label: CC01 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesVoltage supply required according to NEC class 2: No Input current Current consumption, max.: 40 mA; without load Power dissipated Power dissipation, typ.: 2 W

Read more less