Italweber 2504010Single-pole fuse holders for NH knife fuses - screw or DIN rail fixing. The new fuse holder bases for NH fuses of the NHV and NHG series are made of UL-94 V0 self-extinguishing thermoplastic material without red phosphors, and the contacts are in silver-plated copper. Washers and bolts are 8.8 steel. A wide range of accessories allows you to create effective protection against accidental contact (see page 105). The NHV series fuse bases are screw mounted on a bottom plate, while the NHG series bases can be screw mounted on a bottom plate or on a DIN rail. The NHG-MS fuse holder bases are equipped with a microswitch and can be used with the appropriate fuses equipped with a striker from the NH/CP-S series. Size: 00. Type: NHV-00. In: 160.

Read more less

Italweber 1750050Body in steatite with high thermal and mechanical resistance. The fixing distance is in accordance with DIN 43653 standards. This series of fuses is suitable for the protection of semiconductors and has a high breaking capacity and a low value of specific let-through energy. An optional micro to be mounted on the fuse allows you to remotely signal its intervention. Fuse for bolt fixing 80mm center distance NH000 T/80 32A 660V extra-fast.

Read more less

Italweber 2640010Single-pole fuse holders center distance 80 mm. The fuse holder bases suitable for hosting fuses for bolt fixing are all of the unipolar type, and are made up of a base in self-extinguishing thermoplastic material on which the connections for fixing the bolt fuses are mounted. In particular, the 80/110 mm center distance series can accommodate both fuses with a fixing distance of 80 mm and fuses with a fixing distance of 110 mm. This occurs by appropriately moving the base fixing attachments to the two positions provided: 80 mm and 110 mm. A series of microswitches is available for remote signaling of the intervention of the fuses. Type: 790026. In: 400A. Terminal covers available on request, code IW 2640030 (order 2 pieces for each fuse holder).

Read more less

Italweber 1221020The body of the Diazed “D” series fuses is made of steatite with high resistance to thermal and dynamic changes. The fuse element is made of a specially sized copper foil and the nickel-plated brass capsules are pressure mounted on the body of the fuse. Fast D fuses. size: D II / DT II

Read more less

Italweber 2503210Base in self-extinguishing thermoplastic material on which the contact pliers are mounted. Special accessories ensure protection against accidental contact (see page 104). They are designed for fixing both on a bottom plate and on a DIN rail. NHU-00 “KOMBI” fuse holder - 3 poles in a single body - screw or DIN rail fixing

Read more less

Italweber 1465010CH10 SERIES 1000V d.c. gPV FOR THE PROTECTION OF PHOTOVOLTAIC SYSTEMS

Read more less

Italweber 2541005Base in self-extinguishing thermoplastic material on which the contact pliers are mounted. Special accessories ensure protection against accidental contact (see page 104). They are designed for fixing both on a base plate and on a DIN rail. The NHU-MS fuse holder is equipped with a microswitch and can be used in combination with fuses equipped with a striker. NH single-pole fuse holders - Size 00

Read more less

Italweber 0300500They are used in those circuits where small insertion currents occur. Particularly suitable for protecting conductors inside devices or as a general fuse for multiple separately protected circuits. The construction is made of glass tube with nickel-plated brass contacts. Rapid glass fuses 6.3X32 F

Read more less

Italweber 0305016Cylindrical glass fuse 6.3 x 32 mm - Type: standard - Curve: F fast - Current = 16A - Voltage = 250V

Read more less

Italweber 1421000Steatite body suitable to withstand very high temperature changes, filled with quartz sand. The fusion element is composed of a copper foil covered in silver. The double silver-coated capsule avoids oxidation and keeps its characteristics unchanged over time. All cylindrical fuses are designed to minimize the power dissipated, the value of which is indicated on the body of the fuse itself. CH fuses. Size: CH10, SCH10 (10.3x38)

Read more less

Italweber 1465015CH 10 1000V DC gPV series for the protection of photovoltaic systems. The 10.3x38 mm cylindrical fuses with gPV type intervention characteristics constitute the optimal solution for the protection of panel strings in photovoltaic systems. These fuses have been designed and manufactured in accordance with the IEC EN 60269-6 standard, and guarantee a high degree of robustness compared to the typical cyclical nature of the passage of current inside them due to the particular photovoltaic application. They are available in the classic cylindrical version, to be used with the appropriate fuse holders or with the relative pliers, and in a practical version with perforated metal fins for screw fixing directly onto the plate. Size: CH10 (10.3x38 mm). In: 15A.

Read more less

Italweber 1411016Steatite body suitable to withstand very high temperature changes, filled with quartz sand. The fusion element is composed of a copper foil covered in silver. The double silver-coated capsule avoids oxidation and keeps its characteristics unchanged over time. All cylindrical fuses are designed to minimize the power dissipated, the value of which is indicated on the body of the fuse itself. CH fuses. Size: CH8 (8.5x31.5)

Read more less

Italweber 1422025Steatite body suitable to withstand very high temperature changes, filled with quartz sand. The fusion element is composed of a copper foil covered in silver. The double silver-coated capsule avoids oxidation and keeps its characteristics unchanged over time. All cylindrical fuses are designed to minimize the power dissipated, the value of which is indicated on the body of the fuse itself. Standard CH fuses. Size: CH10, SCH10

Read more less

Italweber 1620315NH-2 knife fuse - Type: standard - Curve: gG - Current = 315A - Voltage = 690V

Read more less

Italweber 0100630Glass fuses of the 5x20F series, made in a glass tube with nickel-plated brass contacts. They have a rapid tripping curve (F = Fast), and are therefore suitable for the protection of conductors or equipment with small insertion currents. The nameplate data is marked on the metal contacts of the fuse: manufacturer's logo, nominal current and voltage values, acronym indicating the interrupting capacity and any product approvals.

Read more less

Italweber 1100004The “C” series fuses have a steatite body filled with quartz sand. They are used for the protection of classic circuits. A fusion indicator visually indicates that the intervention has taken place. Breaking capacity: 50 kA. The “CX” series fuse holders consist of a base in thermosetting material and protective caps in noryl. They are supplied complete with cap but without fuses. SERIES C gG fuses

Read more less

Italweber 2306238SECTIONABLE FUSE HOLDER FOR 10.3X38 CC SERIES FUSES.

Read more less

Italweber 1212025 The body of the Diazed “D” series fuses is made of steatite with high resistance to thermal and dynamic changes. The fuse element is made of a specially sized copper foil and the nickel-plated brass capsules are pressure mounted on the body of the fuse. D gG time delay fuses. size: NDZ / TNDZ

Read more less

Italweber 1421012 Steatite body suitable to withstand very high temperature changes, filled with quartz sand. The fusion element is composed of a copper foil covered in silver. The double silver-coated capsule avoids oxidation and keeps its characteristics unchanged over time. All cylindrical fuses are designed to minimize the power dissipated, the value of which is indicated on the body of the fuse itself. CH fuses. Size: CH10, SCH10 (10.3x38)

Read more less

Italweber 0115010Glass fuses of the 5x20T series, made in a glass tube with nickel-plated brass contacts. They have a delayed tripping curve (T = Timedelay), and are therefore suitable for the protection of circuits and equipment that have inrush currents, such as small motors, transformers, etc. The nameplate data is marked on the metal contacts of the fuse: manufacturer's logo, nominal current and voltage values, acronym indicating the interrupting capacity and any product approvals.

Read more less

Italweber 2301138The body of the fuse holder has a modern design and is made of self-extinguishing thermoplastic materials resistant to high temperatures (all materials are UL listed) while the relative contacts are in silver-plated copper. All sectionable fuse holders can be sealed for the safety of operators during maintenance. Fuses must be ordered separately. BCH 38 - Sectionable fuse holders (AC-22B) for cylindrical fuses 10.3X38

Read more less

Italweber 0910848Miniature lamps for signaling, E10 socket, Ø 11x24

Read more less

Italweber 0900141In self-extinguishing thermoplastic material, for panel mounting. They are supplied without fuse. Panel fuse holder for 5X20 fuses. Mounting: built-in. Body: in UL 94 V0 thermoplastic material. Contacts: nickel-plated brass. Execution cap: bayonet. Execution connection: Faston connections. Fuse dimensions: 5x20 mm.

Read more less

Italweber 0910999Miniature lamps for signaling, BA9s socket, Ø 10x28

Read more less