SIEMENS SIMATIC ET 200SP 6ES71346HB000CA1 Analog input module, AI 2x U/I 2-,4-Wire High Feat., suitable for BU type A0, A1, Color code CC05, channel diagnostics, 16 bit, +/- 0.1%. General informationProduct type designation: AI 2 x U/I 2-/4-wire HFHardware version: from FS06Possible FW update: YesUsable BaseUnits: BU type A0, A1Color code for nameplate module-specific color coding: CC03 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : Yes Input current Current absorbed (value nominal): 39 mA; without transducer power supply Power dissipated Power dissipation, typ.: 0.95 W; without transducer power supply

Read more less

Siemens Simatic PLC(DC 24 V - 37 MA) 6es7134 6gd01 0ba1 Analog input module, AI 4XI 2/4 wire standard, Quantity of pieces in the package 1 piece suitable for BU type A0, A1, Color code CC03, Diagnostic module, 16 bit, +/-0.3% General informationProduct type designation: AI 4xI 2-/4-wire STHardware version: From FS02Possible FW update: YesUsable BaseUnits: BU type A0, A1Color code for module-specific color coding label: CC03 Supply voltage Rated value (DC): 24 VAllowable range, lower limit (DC): 19.2 VAllowable range, upper limit (DC): 28.8 VReverse polarity protection : YesInput current Current consumption, max.: 37 mA; without power supply to the transducers Power dissipation Power dissipation, typ.: 0.85 W; without transducer supply voltage

Read more less

SIEMENS SIMATIC ET 200SP 6ES7134-6GB00-0BA1 SIMATIC ET 200SP, Analog input module, AI 2xI 2-/4-Wire Standard, Quantity of pieces in the package 1 piece suitable for BU type A0, A1, Color code CC05, Diagnostics module, 16 bits. General information Product type designation AI 2xI 2/4-wire STHardware version from FS04Firmware version● FW update possible YesUsable BaseUnits BU type A0 , A1Color code for specific color coding plate of module CC05 Supply voltage Rated value (DC) 24 VAllowable range, lower limit (DC) 19.2 VAllowable range, upper limit (DC) 28.8 VReverse polarity protection Yes Input current Current consumption, max. 45mA; without transducer power supply Power dissipated Power dissipation, typ. 1.1 W

Read more less

SIEMENS SIRIUS 3RV2 Circuit breaker Size S00 3RV2011-1DA10 Circuit breaker size S00 for motor protection, CLASS 10 A release 2.2...3.2 A N release 42 A screw terminal standard switching capacity. General information SIRIUS product brandProduct name Circuit breakerProduct execution For engine protectionProduct type designation 3RV2 General technical data Construction size of the circuit breaker S00specific combinable contactor construction size  of company  S00, S0Product extension auxiliary contact block Yes power dissipation [W] with nominal current value● with AC in hot running state 7.25W● with AC in hot operating state for each pole 2.4 WInsulation voltage with pollution degree 3 with AC  nominal value  690 VRated impulse withstand voltage 6 kVShock resistance according to IEC 60068-2-27 25g / 11 ms mechanical life span (operating cycles)● of key contacts typ. 100 000● of auxiliary contacts typ. 100 000electrical life (switching cycles) typ. 100 000type of explosion protection according to the Directive  ATEX product 2014/34/EU  Ex II(2) GDCertificate of suitability according to the ATEX Product Directive  2014/34/EU  DMT 02 ATEX F 001reference code according to IEC 81346-2:2009 QRoHS Directive (date) 10/01/2009

Read more less

SCHNEIDER ELECTRIC XPSMCMCP0802 The Schneider Electric XPSMCM safety controller CPU is powered by 24 VDC, has 8 digital inputs, 2 interlock inputs for start/restart, 2 output OSSD pairs, 4 test outputs and 2 status outputs and stud terminals. This configurable safety controller complies with the requirements of PL e/Category 4 according to EN/ISO 13849-1 and SILCL3 according to EN/IEC 62061. It is an appropriate solution for machines with a limited number of safety functions that require configuration flexibility of a safety controller. It can be used as a standalone or with fourteen expansion modules: the system is expandable up to 128 inputs, 16 outputs and up to 32 diagnostic status outputs, ideal for machines that require monitoring of multiple safety functions. Click for large 360 ​​view of SCHNEIDER ELECTRIC XPSMCMCP0802

Read more less

SCHNEIDER ELECTRIC 7"W TOUCH PANEL DISPLAY  HMIST6400 This Basic HMI belongs to the Harmony ST6 range of Schneider Electric. The single touch resistive HMI is made with an aluminum front panel with a multi-colored status indicator that shows the various modes of operation. This HMI has a size of 7 inches with 16 million colors and a resolution of 800 x 480 pixels (WVGA). It is configurable using EcoStruxure Operator Terminal Expert software for an intuitive user experience. It has an 800 MHz ARM Cortex-A8 CPU, 1 GB device memory, 128 MB user data memory and 512 KB backup memory. This ST6 HMI integrates 2 Ethernet ports, COM1 (RS-232C), COM2 (RS-485), 1 USB2.0 Type A and 1 USB 2.0 Micro-B port. Dimensions: 208mm (width) x 153mm (height) x 45mm (depth); weight: 0.80 Kg. It is designed for use in industries such as packaging, food and beverage, textiles, HVAC equipment and compressors, and also for end users who need to maintain their web devices. It complies with EN standards (61000-6-4, 61000-6-2, 61131-2), UL 61010-2-201, CSA C22.2 No 61010-2-201 and is CSA, CE, China RoHS, KC, REACH certified. The range is designed to meet the needs of simple machine operators by offering good visualization, connectivity, end-to-end cybersecurity thanks to EcoStruxure Secure Connect Advisor and competitive costs. The range ensures different degrees of protection: IP65F, type 1, type 4X (for internal use only), type 13 (on the front panel, if correctly installed in a cabinet). Click for large 360 ​​view of SCHNEIDER ELECTRIC HMIST6400

Read more less

SCHNEIDER ELECTRIC MODULE 8 ANALOGUE INPUTS ISOL. RTU BMXAMI0810 The high resolution analog input module is part of the Modicon X80 modules. It has 8 isolated analog inputs (15 bits + sign). This module is connected via a 28-way removable terminal block. The module offers different voltage or current ranges for each of the inputs, depending on the configuration you choose. It occupies a single slot in the rack and has an enclosure that provides 20 protection to the electronics.

Read more less

SCHNEIDER ELECTRIC Regulated switching power supply - Three phase - 400 V AC - 24 V - 20 A ABL8WPS24200 Universal stabilized switching power supply, intended for powering, in 24 V DC, the auxiliary circuits of automation systems. Compact, and with switching technology, it guarantees a high degree of stability of the output voltage and represents the ideal complement for the Modicon M340, Premium and Quantum ranges. Additional functional modules can be associated in order to guarantee continuity of service and at the same time be able to discriminate the protection of the powered systems. It guarantees an output voltage equal to the nominal value of 24 V DC ±3%, regardless of the load (from empty to full load) and for any mains supply. Compliant with IEC standards and UL, CSA and TUV approved, it is suitable for universal use. It has protections that ensure optimal operation of the control and automation system. The protection operating mode can be configured according to your specific application needs: • Manual reset protection mode: following a defect that involves a current absorption higher than the nominal value, priority will be given to the output voltage: the power supply will stop completely before the voltage supplied can drop below 21 V DC. In this way, unwanted variations in the logical states of the PLC and powered actuators will be avoided. • Automatic reset protection mode: priority is given to the current to allow, for example, fault finding, or to guarantee continuity of service until the arrival of maintenance workers. When the defect appears, the nominal current continues to be supplied but at a voltage significantly lower than the nominal one of 24 V DC. When the fault disappears the voltage returns to its nominal value. Phaseo Universal power supplies also have a power reserve that allows them to supply a current of 1.5 In at regular intervals; in this way it is possible to avoid oversizing the power supply if devices characterized by high inrush currents must be powered. The diagnostic function of Phaseo Universal power supplies is shown on the front of the product via signaling LEDs (Uout and Iout) and via a potential-free relay contact which allows remote control. All Phaseo Universal power supplies are equipped with a potentiometer for regulating the output voltage to compensate for voltage drops along long cables. Click for a 360 degree view of SCHNEIDER ELECTRIC ABL8WPS24200

Read more less

PILZ PNOZ MONITORING RELAY FOR SAFETY CIRCUITS M B0, PIZ772100 - PNOZMB0 24DC 20 INP-4 OUT EXPANDABLE. Model: Base unitType of electrical connection: Screw connectionRail mounting possible: yesRated control voltage Us DC: 24...24 VType of voltage for the drive: DCWith removable terminals: yesInput evaluation: 1-channelWith start input: yesWith muting function (Possibility of By-Pass during passage of incoming material): noNumber of outputs, contact, safety, non-delayed: 0Number of outputs, contact, safety, delayed: 0Number of outputs, semiconductor, safety, non-delayed: 4Number of outputs, semiconductor, safety, delayed: 4Number of outputs, contact, signaling, non-delayed: 0Number of outputs, contact, signaling, delayed: 0Number of outputs, semiconductor, signaling, non-delayed: 8Number of outputs, semiconductor, signaling, delayed: 0Stop category according to IEC 60204: 0 + 1Performance level according to EN ISO 13849-1: eSIL level according to IEC 61508: 3BG BIA approval: noUL approval: yesWidth: 45 mmHeight: 101.4 mmDepth: 120 mm

Read more less

PEPPERL+FUCHS TRANSMITTER POWER SUPPLY  KFD2-STC4-Ex1.2O  283674 Functions: This isolating barrier is used for intrinsic safety applications. The device supplies power to 2-wire and 3-wire SMART transmitters in a hazardous area and can also be used with 2-wire SMART power sources. Transfers the analog input signal to the safe area as an isolated current value. Digital signals can be superimposed on the input signal in the dangerous or safe area and are transferred in both directions. If the HART communication resistance in the circuit is too low, the internal 250 Ω resistor between terminals 8 and 9 can be used. Test sockets for connecting HART communication devices are integrated into the device terminals. Applications The device supports the following SMART protocols: HART BRAIN Foxboro

Read more less

Pepperl+Fuchs Switch Amplifier KFD2-SR2-Ex2.W 203355  This isolated barrier is used for intrinsically safe applications. The device transfers digital signals from NAMUR sensors or dry contacts from the hazardous area to the non-hazardous area.The proximity sensor or mechanical contact controls the control side load for an output with relay contact. The output of the device changes state when the input signal changes state.Using the switches it is possible to invert the operating mode and deactivate line fault detection.During a fault condition fault, the relay returns to the de-energized state and the LEDs indicate the fault according to NAMUR NE 44.If the device is operated via Power Rail a collective error message is also available.Isolated barrier 2-channel, 24 V DC power supply (power rail), dry contact or NAMUR inputs, relay contact output, line fault detection (LFD), reversible operating mode, up to SIL 2 (SC 3) acc. according to IEC/EN 61508, housing width: 20 mm, number of channels: 2 channels, safety integrity level (SIL): SIL 2, systematic capacitance (SC): SC 3, nominal voltage: 19 ... 30 V DC , Field device: NAMUR sensor, Field device [2]: potential-free contact, Line fault detection, Type: 2 x relay (changeover contact)Connection: power rail or 14+ terminals, 15-Rated voltage: 19 ... 30 V DCRipple: ≤ 10%Rated current: ≤ 50 mAPower dissipation: ≤ 1 WPower consumption: ≤ 1 W

Read more less

Omron NX Series, EtherCAT Coupler, 2 ports, 10A I/O power, 125 micro s refresh  NXECC203 I/O system: NX I/O busModule type: Bus couplerSIL according to IEC 61508: NoneCommunication ports: EtherCAT SlaveNumber of communication ports: 2 Degree of protection (IP): IP20Product height (unpackaged): 100 mmProduct width (unpackaged): 46 mmProduct depth (unpackaged): 80 mm Product weight (without packaging): 250 g

Read more less

DATALOGIC Datasensing S5N-PA-5-G00-XG EMITTER M12 Extended range of standard “one for all” M18 photoelectric tubular sensors All optical functions Improved EMI immunityBetter immunity to ambient lightImproved laser safety levelM18 flat plastic with universal mountingModels with short plastic caseAvailable with M18 metal case Models with stainless steel caseAxial or radial optics, cable or connectorStandard 4-wire NO-NC NPN or PNP outputM12 pigtail models availableIO-Link V1.1 connectivity with dual channelElectrical dataOperating voltage 10…30 VDCNo-load supply current ≤ 35 mALoad current ≤100 mALeakage current ≤10μALED indicators Green POWER LEDShort circuit protection YESReverse polarity protection YesInfrared LED emissionInterference to external light according to EN 60947-5- 2:2020Impulsive overvoltage protection YesInsulation resistance >20 MΩ 500 Vdc, between electronics and housingContact resistance 500 Vac 1 min., between electronics and housing

Read more less

BALLUFF BNI005H Network module for Profinet Interface: Profinet I/O Fast Start-Up (FSU): yes Operating voltage UB: 18...30.2 VDC Indicator: yes Connection ( COM 1): M12x1-Socket, 4-pin, D-coded Connection (COM 2): M12x1-Socket, 4-pin, D-coded Connection (voltage supply IN): 7/8" -Connector, 5-pin Connection (power supply OUT): 7/8"-Socket, 5-pin Slot connection: 8x M12x1-Socket, 5-pin, A-coded Digital inputs : 16x PNP, type 3 Digital outputs: 16x PNP Configurable inputs/outputs: yes Max. output current: 2 A short-circuit proof and overload-proof Summation current US, sensor: 9.0 A Summary current UA, actuator: 9.0 A Housing material: Zinc, die cast Dimensions: 68 x 37.9 x 224 mm Ambient temperature: -5...70 °C Protection rating: IP67 Additional interfaces: 8x IO-Link IO-Link version: 1.1 Port class: Type A Safety Hub Support: yes

Read more less

ALLEN-BRADLEY Digital I/O module for Rockwell Automation PLC series/model 8 CHANNEL SFTY SINKING INP MOD PN-25132 - 1734IB8S Direct current (DC) supply voltage: 10...10 V Type of supply voltage: DC Number of digital inputs: 8 Configurable digital inputs: yes Input current at signal 1: 4 mA Allowed input voltage: 10...10 V Type of input voltage: DC Short circuit protection, available on outputs: yes Type of electrical connection: Screw connection Delay time at signal change: 0.5...0.5 ms Suitable for safety functions: yes Width: 12 mm Height: 56 mm Depth: 75.5 mm

Read more less

Allen-bradley 2711P-T7C22D9P Graphic control panel series/model panelview plus 7 graphic terminal Direct current (DC) supply voltage: 18...30 VDisplay type: TFT (LCD Thin Film Transistor)Max. horizontal resolution: 640Max. vertical resolution: 480Type of supply voltage: DCNumber of industrial Ethernet hardware interfaces: 1Number of USB hardware interfaces: 3With SW interface: yesSupports DeviceNet protocol: yesSupports Ethernet / IP protocol: yesWith color display: yesNumber of colors of display: 18Screen diagonal: 6 inchApplication / Backup memory: 524288 kByteWith numeric keypad: noWith alphanumeric keyboard: noWith printer output: yesGrade Front IP protection rating: IP66Operating temperature: 0...55 °CPossibility of rail mounting: noPossibility of wall / direct mounting: yesWidth of the front frame: 212.09 mmHeight of the front frame: 169.926 mmRecessing depth : 69.6 mm

Read more less

ALLEN-BRADLEY PanelView Plus 7 Graphic Terminal 2711P-T15C22D9P   Direct current (DC) supply voltage: 24...24 VDisplay type: TFT (LCD Thin Film Transistor)Type of supply voltage: DCNumber of hardware interfaces Industrial Ethernet: 1Number of PROFINET hardware interfaces: 0Number of RS232 serial hardware interfaces: 0Number of RS422 serial hardware interfaces: 0Number of RS485 serial hardware interfaces: 0 Number of TTY serial hardware interfaces: 0Number of USB hardware interfaces: 2Number of parallel hardware interfaces: 0Number of Wireless HW interfaces: 0Number of other hardware interfaces: 0 With SW interface: yesSupports TCP / IP protocol: noSupports PROFIBUS protocol: noSupports CAN protocol: noSupports INTERBUS protocol: noSupports ASI protocol: no Supports EIB/KNX protocol: noSupports MODBUS protocol: noSupports Data-Highway protocol: noSupports DeviceNet protocol: noSupports SUCONET protocol: noSupports LON protocol: noSupports PROFINET IO protocol: noSupports PROFINET CBA protocol: noSupports SERCOS protocol: noSupports Foundation Fieldbus protocol: noSupports Ethernet / IP protocol: yesSupports AS protocol -Interface Safety at work: noSupports DeviceNet Safety protocol: noSupports INTERBUS-Safety protocol: noSupports PROFIsafe protocol: noSupports SafetyBUS p protocol: noSupports protocols for others bus systems: noWith color display: yesNumber of display colours: 262144Screen diagonal: 15 inchWith numeric keypad: noWith alphanumeric keyboard: noFront IP protection degree: IP66Operating temperature: 0...55 °CPossibility of rail mounting: noPossibility of wall / direct mounting: yesFrame width front: 381 mmHeight of the front frame: 318 mmRecessing depth: 69.6 mm

Read more less

ALLEN-BRADLEY Graphic control panel type/model Rockwell Automation 2711P-T12W22D9P - PANELVIEW PLUS 7 GRAPHIC TERMINAL Screen diagonal: 12.1 inchDisplay type: TFT (LCD Thin Film Transistor)With color display: yesNumber of display colors: 262144Front IP protection rating : IP66Supply voltage type: DCSupports TCP / IP protocol: noSupports PROFIBUS protocol: noSupports CAN protocol: noSupports MODBUS protocol: noSupports PROFINET IO protocol: noSupports Ethernet / IP protocol: yesSupports PROFIsafe protocol: noDirect current (DC) supply voltage: 24...24 VNumber of Ethernet hardware interfaces industrial: 1Number of PROFINET hardware interfaces: 0Number of RS232 serial hardware interfaces: 0Number of RS422 serial hardware interfaces: 0Number of RS485 serial hardware interfaces: 0Number of TTY serial hardware interfaces: 0Number of USB hardware interfaces: 2Number of parallel hardware interfaces: 0Number of Wireless HW interfaces: 0Number of other hardware interfaces: 0With SW interface: yesSupports INTERBUS protocol: noSupports ASI protocol: noSupports EIB/KNX protocol: noSupports Data-Highway protocol: noSupports DeviceNet protocol: noSupports SUCONET protocol: noSupports LON protocol: noSupports PROFINET CBA protocol: noSupports SERCOS protocol: noSupports Foundation Fieldbus protocol: noSupports AS-Interface Safety at protocol work: noSupports DeviceNet Safety protocol: noSupports INTERBUS-Safety protocol: noSupports SafetyBUS p protocol: noSupports protocols for other bus systems: noWith numeric keypad: no With alphanumeric keypad: noOperating temperature: 0...55 °CPossibility of rail mounting: noPossibility of wall / direct mounting: yesFrame width front: 340 mmHeight of the front frame: 240 mmRecessing depth: 69.6 mm

Read more less

Allen-bradley 2711P-T10C22D9P Graphic control panel type/model - panelview plus 7 graphic terminal Screen diagonal: 10.4 inchDisplay type: TFT (LCD Thin Film Transistor)With color display: yesNumber of display colours: 262144Front IP protection rating : IP66Supply voltage type: DCSupports TCP / IP protocol: noSupports PROFIBUS protocol: noSupports CAN protocol: noSupports MODBUS protocol: noSupports PROFINET IO protocol: noSupports Ethernet / IP protocol: yesSupports PROFIsafe protocol : noDirect current (DC) supply voltage: 24...24 VNumber of industrial Ethernet hardware interfaces: 1Number of PROFINET hardware interfaces: 0Number of RS232 serial hardware interfaces: 0Number of RS422 serial hardware interfaces: 0Number of interfaces RS485 serial hardware interfaces: 0Number of TTY serial hardware interfaces: 0Number of USB hardware interfaces: 2Number of parallel hardware interfaces: 0Number of wireless HW interfaces: 0Number of other hardware interfaces: 0With SW interface: yesSupports INTERBUS protocol: noSupports ASI protocol: noSupports EIB/KNX protocol: noSupports Data-Highway protocol: noSupports DeviceNet protocol: noSupports SUCONET protocol: noSupports LON protocol: noSupports protocol PROFINET CBA: noSupports SERCOS protocol: noSupports Foundation Fieldbus protocol: noSupports AS-Interface Safety at work protocol: noSupports DeviceNet Safety protocol: noSupports INTERBUS-Safety protocol: noSupports SafetyBUS p protocol: noSupports protocols for other bus systems: noWith keypad numeric: noWith alphanumeric keyboard: noOperating temperature: 0...55 °CPossibility of rail mounting: noPossibility of wall / direct mounting: yesFront frame width: 297 mmFront frame height: 252 mmRecess depth: 69.6 mm

Read more less

Allen-bradley Powerflex 525 series/model frequency converter 0.75KW (1HP) AC drive 25B-D2P3N114 Mains voltage: 380...480 VMaximum output frequency: 500 HzNominal output current I2N: 2.3 AProtection degree (IP): IP20Switching frequency mains: 50/60 HzNumber of input phases: 3Number of output phases: 3Maximum output voltage: 480 VNumber of analog inputs: 2Number of digital outputs: 2Number of digital inputs: 7With control unit: yesSuitable for use in the industrial sector: yesSuitable for commercial/home use: yesSupports TCP / IP protocol: noSupports PROFIBUS protocol: yesSupports CAN protocol: noSupports INTERBUS protocol: noSupports ASI protocol : noSupports EIB/KNX protocol: noSupports MODBUS protocol: yesSupports Data-Highway protocol: noSupports DeviceNet protocol: yesSupports SUCONET protocol: noSupports LON protocol: noSupports PROFINET IO protocol: noSupports PROFINET protocol CBA: noSupports SERCOS protocol: noSupports Foundation Fieldbus protocol: noSupports Ethernet / IP protocol: yesSupports AS-Interface Safety at work protocol: noSupports DeviceNet Safety protocol: noSupports INTERBUS-Safety protocol : noSupports PROFIsafe protocol: noSupports protocol SafetyBUS p: noSupports protocol for BACnet: noSupports protocols for other bus systems: yesWith optical interface: noWith PC connection: yesIntegrated braking resistor: no4 quadrant operation option: noHeight: 152 mmWidth: 72 mmDepth: 172 mm

Read more less

Allen-bradley 2198-P070 Accessories and spare parts for kinetix 5700 series/model frequency converter DC bus supply ConstructionHeight 358 mmWidth 55 mmDepth 250 mmElectricalControl power DC input current 0.8 AInternal shunt power 75 WCapacitive energy absorption 172 JInternal shunt resistance 37.5 OhmInternal capacitance 780 µFRated output power 151 W at 100%DC output continuous current to bus 25.5 A, three phaseCurrent peak output to the bus 70.3 A, 3-phaseMain AC input current 27.0 A at 324...524 V rms, 3-phasePeak AC input current 74.3 A at 324...524 V rms, 3-phaseCurrent control power supply 4 A at 24 V inrush currentContinuous output power to bus 8.5 kW at 240 V rms nominal, three phase at 1/2 power, 17.0 kW at 480 V rms nominal, three phase.Peak output power to the bus 23 kW at 240 V rms nominal, three phase at 1 /2 power, 46 kW at 480 V rms nominal, three phase.Loss line voltage for 20 msEfficiency 99%AC input frequency 47 HzControl power DC input voltage 24 V DC (±10%)Rated bus output voltage 458... 747 V DCInrush, max 33 A (zero to peak)Bus surge voltage 832V DC to 480V, AC input nominalAC input voltage 195...528V rms 3-phase (240/480V nominal)Shunt on 775V plus 30V x bus regulator capacity/usageShunt 765 V plus 30 V x bus regulator capacity/usageMechanicalWeight 4.42 kg

Read more less

ALLEN-BRADLEY Accessories and spare parts for Rockwell Automation POWERFLEX ARCHITECTURE CLASS HIM series/model frequency converters 20-HIM-A6 ConverterProtocol: PPEData rate: 125 kbps or 500 kbps ConsumptionConverter (DPI): 140 mA at 12 VDC supplied by host drive Dimensions - H x W x D116 x 70 x 16 mmWeight 91 g TemperatureOperation: 0...50 °CStorage: -40...85 °CRelative humidity: 5...95% non-condensing Atmosphere: Important: The module must not be installed in an area where the ambient atmosphere contains volatile or corrosive gases, vapors or dust.If the module is not to be installed immediately, it should be stored in an area where it will not be exposed to a corrosive atmosphere. UV radiation: The operator interface module is not guaranteed against UV radiation. VibrationsIn operation: 2.5 G at 5...2,000 HzAt rest: 5 G at 5...2,000 HzBumpsIn operation: Peak acceleration 30 G, 11 (±1) ms pulse widthAt rest: Peak acceleration 50 G, 11 (±1) ms pulse width

Read more less

Allen-Bradley Stratix 2000 Switch, Unmanaged, 8 Copper Ports 1783-us8t Unmanaged Switch TypeNo. of Fiber Ports Required NoneNumber of Combo Ports (Copper/Fiber) NoneDo you need connectivity to an IT environment? (using Cisco technology and tools (CLI, CNA, CiscoWorks)) NoDo you need any of these network services? NoneDo you need routing functionality...? NODo you need PoE (Power Over Ethernet)? NoDo you need built-in DLR? NODATAStratix Ethernet Stratix 2000 familyIP20 environmentStratix 2000 Family Ethernet Switch, Unmanaged, 8 Copper PortsACCESSORIESNetwork Cables 1585 Cat5e Ethernet Cable, 100BASE-TX, 100Mbit/s, 8-Conductor, RJ45, Straight Male, Standard, RJ45, Straight Male, Aqua Green Robotic TPE, Solder Splash, Sunlight and Oil Resistant; UL CMG, CMX; cULCMG; TIA 568-B Standard, Flexible Certificate

Read more less

Allen Bradley  1756-EN2TR Communication Module for CLX Series/Model PLC enet IP 100M dlr Number of Industrial Ethernet Hardware Interfaces: 2Supports TCP/IP protocol: YesSupports PROFIBUS protocol: noSupports MODBUS protocol: noSupports Ethernet/IP protocol: YesATEX gas atmosphere category: NoneATEX dust atmosphere category: NoneNumber of USB hardware interfaces: 1Supports Data-Highway protocol: NoSupports DeviceNet protocol: NoSupports protocols for other bus systems: noRedundancy: yesWidth: 35 mmHeight: 145 mmDepth: 140 mm

Read more less