Abb ISL-C 600 insulation monitor 2CSM656000R1500 ISL industrial insulation monitors allow IT networks to continuously monitor the insulation level to identify faults and restore optimal operationof the system. Technical dataRated voltage 60 ... 760 V ACoperation(50 Hz) 100...240 V(60 Hz ) 100...240 VRated voltage ofcontrol power supply(Us)Model Number Basic deviceDelay time (τ) Release 0...5 second [unit time measurement]Options provided AC network Environmental dataRoHS Declaration According to EC Directive 2011/65/ECRoHS information 9AKK108467A8682 DimensionsProduct width 105 mmProduct height 0.090 mProduct depth 44 mmProduct net weight 0.500 kg

Read more less

Abb QSO 5S Premium operating room panel 2CSM273682R1551 The QSO range of electrical panels for rooms used for medical use constitutes a solution specifically designed to protect the safety and continuity of service of operating rooms. The QSO operating room electrical panels are the ideal solution for distribution within group 2 medical rooms. They are available in four sizes in the CLASSIC versions, which contains the essential equipment for protection against direct contact, and PREMIUM which adds, depending on the type of panel, further emergency devices for powering the operating room circuits, overvoltage protection, rapid cabling system. Technical data Rated control supply voltage (Us): (50 Hz) 230...230 V (60 Hz) 230...230 VPower supply: 5 kV · AModel Number:  Basic deviceDelay time (τ):Release 0...0 second [ time unit]Mounting type: WallOptions provided: 2x10A + 5x16A + 1x25A Environmental data Environmental information: refer to RoHS Information Conflict Minerals Reporting Template (CMRT): 9AKK108468A3363 Dimensions Product width: 700 mm Product height: 1.100 m Product depth: 200 mm Product net weight: 130 kg

Read more less

ABB Sentry SSR10M 85-265 VAC/120-275 VDC  2TLA010050R0100 PLC, relays, devices, systems and safety barriers, Security, Sentry safety relay, Sentry SSR10M 85-265 VAC/VDC, Command, control, electronics and systems products for safety. Technical data Function: Safety relay for monitoring of safety devices Subfunction: Start/test input, Manual/Auto reset selectable by switch Timer relay type: No Time Delay Rated control supply voltage (Us): 120 ... 375 V DC85 ... 265 V AC Degree of protection: IP20 Connection capacity: Crimped Pin 1x0.2...3.3 mm²Crimped Pin 2x0.2...1.5 mm²Flexible with Ferrule 1x0.2...3.3 mm²Flexible with Ferrule 2x0.2. ..1.5 mm²Solid 1x0.2...3.3 mm²Solid 2x0.2...1.5 mm² Tightening torque: 0.7 N·m Cable stripping length: 6.5 mm Recommended screwdriver: M3.5 DIN rail mounting: TH35-15 (35 x 15 mm Mounting Bar) according to IEC 60715TH35-7.5 (35 x 7.5 mm Mounting Bar) according to IEC 60715 Reference standards: IS0 13849

Read more less

Abb Sentry TSR10 24VDC 2TLA010060R0000 PLC, relays, devices, systems and safety barriers, Security, Sentry safety relay, Sentry TSR10 24VDC, Command, control, electronic and systems products for safety. Technical dataFunction: Safety relay for monitoring of safety devicesSubfunction: Start/test input, configurable Manual/Auto reset and Timer, Display (error indication and error log)Type of timer relay: MultifunctionTime range: 0 … 999 secondsRated control supply voltage (Us): 24 V DCDegree of protection: IP20Capacity connection: Crimped Pin 1x0.2...3.3 mm²Crimped Pin 2x0.2...1.5 mm²Flexible with Ferrule 1x0.2...3.3 mm²Flexible with Ferrule 2x0.2. ..1.5 mm²Solid 1x0.2...3.3 mm²Solid 2x0.2...1.5 mm²Tightening torque: 0.7 N mCable stripping length: 6.5 mmRecommended screwdriver: M3.5DIN rail mounting: TH35-15 (35 x 15 mm Mounting Bar) according to IEC 60715TH35-7.5 (35 x 7.5 mm Mounting Bar) according to IEC 60715Reference standards: IS0 13849

Read more less

Abb TI 3-S medical transformers 3KVA 2CSM210000R1541 Single-phase isolation transformers for medical use ensure galvanic separation between the distribution network and the user load in compliance with the IEC EN 61558-1 and IEC EN Standards 61558-2-15 concerning the power supply of group 2 medical environments. Technical data(50 Hz) 230...230 V(60 Hz) 230...230 VRated supply voltage control (Us)Power loss at Nominal Operating Conditions for Pole 120 WPower supply 3 kV · AModel Number Basic deviceDelay time (τ) Release 0...0 second [time unit]Options supplied with PT100 sensor Environmental data RoHS Declaration: According to EC Directive 2011/65/EC RoHS information: 9AKK106713A5715 Environmental information: refer to RoHS Information Conflict Minerals Reporting Template (CMRT): 9AKK108468A3363 Dimensions Product width: 240 mm Product height: 0.340 m Product depth: 160 mm Product net weight: 29.5 kg

Read more less

Abb ISL-MOT 1000 Insulation Monitor M808000 ISL industrial insulation monitors allow IT networks to continuously monitor the insulation level to identify faults and restore optimal operationof the system. Technical dataRated operating voltage: 20 ... 700 V AC/DCRated control supply voltage (Us): (50 Hz) 230...230 V(60 Hz) 230...230 VPower loss:a Nominal Operating Conditions for Pole 4 WModel Number:Basic deviceDelay time (τ):Release 0. ..0.2 second [time unit]Provided options:Voltageless networkEnvironmental dataRoHS declaration:According to EC Directive 2011/65/ECRoHS Information:9AKK108467A8682Environmental Information:Refer to RoHS InformationConflict Minerals Reporting Template (CMRT):9AKK108468A3363 Classifications ETIM 8: EC001449 - Device for monitoring of safety-related circuitsETIM 9: EC001449 - Device for monitoring of safety-related circuits WEEE category: 5. Small equipment (no external dimension greater than 50 cm)CN8: Business To Consumer Design object type: 90303100 eClass: V11.0 : 27371819Object classification code: F

Read more less

ABB QSD-DIG 230/24 signaling panel M273063 The QSD remote signaling panel is installed in the rooms with the greatest medical care to allow medical staff to view the signals identified by the ISOLTESTER and SELVTESTER isolation monitors. Technical dataRated voltage of 500 ... 760 V ACoperationRated voltage of 24 V DCcontrol power supply ( Us)AtRatedLoad 1 WModel Number Basic deviceDelay time (τ) Release 0...0 second [unit of measurement of time]Mounting Orientation Horizontal DimensionsProduct width 121 mmProduct height 0.078 mProduct depth 55 mmProduct net weight 0.2 kg

Read more less

SIEMENS SIRIUS SAFETY RELAY STD RELAY 3NO,1NC 3SK11112AB30 SIRIUS safety device basic device Standard series relay enabling circuits 3 NO contacts plus relay signaling circuit 1 NC Us = AC/DC 24 V spring terminal (Push-in). General technical data:IP protection degree of the housing IP20contact protection against electrocution finger protectioninsulation voltage nominal value 300 V Ambient temperature● during storage -40 ... +80 °C● during operation -25 ... +60 ° Catmospheric pressure according to SN 31205 90 ... 106 kParelative humidity during operation 10 ... 95 %installation altitude for altitude above sea level. max. 4 000 m; For derating see Product Communication 109792701vibration resistance according to IEC 60068-2-6 5 ... 500 Hz: 0.75 mmshock resistance 10g / 11 msimpulse withstand voltage nominal value 4 000 VeMC interference emission IEC 60947-5-1, IEC 61000EMC-related installation environment This product is suitable for class B environments and can also be usedin domestic environments .overvoltage category 3pollution degree 3reference code according to IEC 81346-2:2009 Fpower dissipation [W] max. 2 Wnumber of inputs for 1- or 2-channel sensors 1cascade connection noneinput safety wiring designsingle-channel and redundant product feature cross-circuit protection Yes Safety Integrity Level (SIL)● according to IEC 62061 3● according to IEC 61508 3performance Level (pL) ● according to ISO 13849-1 and category according to EN ISO 13849-1 4non-dangerous failure rate (SFF) 99 %PFHD for high demand rate according to EN 62061 1.7E-9 1/hPFDavg for low demand rate according to IEC 61508 1E-6T1 value for proof test interval or duration of use according to IEC 61508 20 years.

Read more less

Pepperl+Fuchs Switch Amplifier KFD2-SR2-Ex2.W 203355  This isolated barrier is used for intrinsically safe applications. The device transfers digital signals from NAMUR sensors or dry contacts from the hazardous area to the non-hazardous area.The proximity sensor or mechanical contact controls the control side load for an output with relay contact. The output of the device changes state when the input signal changes state.Using the switches it is possible to invert the operating mode and deactivate line fault detection.During a fault condition fault, the relay returns to the de-energized state and the LEDs indicate the fault according to NAMUR NE 44.If the device is operated via Power Rail a collective error message is also available.Isolated barrier 2-channel, 24 V DC power supply (power rail), dry contact or NAMUR inputs, relay contact output, line fault detection (LFD), reversible operating mode, up to SIL 2 (SC 3) acc. according to IEC/EN 61508, housing width: 20 mm, number of channels: 2 channels, safety integrity level (SIL): SIL 2, systematic capacitance (SC): SC 3, nominal voltage: 19 ... 30 V DC , Field device: NAMUR sensor, Field device [2]: potential-free contact, Line fault detection, Type: 2 x relay (changeover contact)Connection: power rail or 14+ terminals, 15-Rated voltage: 19 ... 30 V DCRipple: ≤ 10%Rated current: ≤ 50 mAPower dissipation: ≤ 1 WPower consumption: ≤ 1 W

Read more less

PILZ PNOZ MONITORING RELAY FOR SAFETY CIRCUITS M B0, PIZ772100 - PNOZMB0 24DC 20 INP-4 OUT EXPANDABLE. Model: Base unitType of electrical connection: Screw connectionRail mounting possible: yesRated control voltage Us DC: 24...24 VType of voltage for the drive: DCWith removable terminals: yesInput evaluation: 1-channelWith start input: yesWith muting function (Possibility of By-Pass during passage of incoming material): noNumber of outputs, contact, safety, non-delayed: 0Number of outputs, contact, safety, delayed: 0Number of outputs, semiconductor, safety, non-delayed: 4Number of outputs, semiconductor, safety, delayed: 4Number of outputs, contact, signaling, non-delayed: 0Number of outputs, contact, signaling, delayed: 0Number of outputs, semiconductor, signaling, non-delayed: 8Number of outputs, semiconductor, signaling, delayed: 0Stop category according to IEC 60204: 0 + 1Performance level according to EN ISO 13849-1: eSIL level according to IEC 61508: 3BG BIA approval: noUL approval: yesWidth: 45 mmHeight: 101.4 mmDepth: 120 mm

Read more less

SCHNEIDER ELECTRIC XPSMCMCP0802 The Schneider Electric XPSMCM safety controller CPU is powered by 24 VDC, has 8 digital inputs, 2 interlock inputs for start/restart, 2 output OSSD pairs, 4 test outputs and 2 status outputs and stud terminals. This configurable safety controller complies with the requirements of PL e/Category 4 according to EN/ISO 13849-1 and SILCL3 according to EN/IEC 62061. It is an appropriate solution for machines with a limited number of safety functions that require configuration flexibility of a safety controller. It can be used as a standalone or with fourteen expansion modules: the system is expandable up to 128 inputs, 16 outputs and up to 32 diagnostic status outputs, ideal for machines that require monitoring of multiple safety functions. Click for large 360 ​​view of SCHNEIDER ELECTRIC XPSMCMCP0802

Read more less

SCHNEIDER ELECTRIC UAF 24V M.SCREW safety moduleXPSUAF13AP The product is part of the XPS Universal security module range. It is designed for monitoring emergency stops, safety, magnetic or proximity switches, PNP sensors, RFID safety switches and safety barriers. The safety module is powered by 24V AC/DC and equipped with an extractable screw terminal. It can transmit more than 40 different status messages from the module output to a standard digital input of a PLC, reducing machine downtime and indicating the cause of the production stoppage. The safety module includes 2 safety inputs, 3 configurable ON/OFF pulse outputs, 3 NO safety outputs and 1 diagnostic output with complete status information. The maximum safety level achieved by this safety module is PLe/Category 4 compliant with ISO 13849-1, SILC L 3 compliant with IEC 62061 and SIL 3 compliant with IEC 61508. The safety module has a weight of 0.200 kg. Dimensions: 22.5mm (width) x 120mm (depth) x 100mm (height). These safety modules are suitable for applications in food, lifting, material handling, materials processing, packaging and are designed for a wide range of industrial machines. The safety module complies with the standards IEC 60947-5-1, IEC 61508-1, IEC 61508-2, IEC 61508-3, ISO 13849-1, IEC 62061, IEC 60947-5-1, IEC 61508 -1, IEC 61508-2, IEC 61508-3, ISO 13849-1, IEC 62061 and is cULus and TUV certified. The module is mounted on a 35 mm symmetrical DIN rail. Preventa XPS Universal safety modules are the first choice for easily managing safety functions, generally for simple to medium complexity machines. Click for a 360 degree view of XPSUAF13AP Schneider Electric

Read more less