Finder control relay 720180240000POA Level control relay for conductive liquids Type 72.01 equipped with adjustable sensitivity (5…150)kΩ, selectable trip delay (0.5 s or 7 s) via selector and filling or emptying function selectable via selector.This type of relay is also available for 400 V power supply and in the version with adjustable sensitivity (5…450)kΩ. Furthermore, it can be equipped with a contact for low loads up to 5 V – 1 mA. Features: Filling and emptying functions LED indicator Double insulation (6 kV – 1.2/50 µs) between:– power supply and contacts– probes and power supply– contacts and probes Mounting on 35 mm rail (EN 60715) Control of a single level or two Min/Max levels Technical data: Type of electrical connection: Screw connectionWith removable terminals: no Type of supply voltage: ACAlternating current (AC) supply voltage 50 Hz: 24...24 VAlternating current (AC) supply voltage 60 Hz: 24...24 V Number of electrode inputs: 3 Min. delay time: 0.5 sMax. delay time: 7 sMin. OFF delay: 0.5 sMax. OFF delay: 7 s Physical measurement principle: ConductiveAdjustable sensitivity: yes Number of NC contacts: 0Number of NO contacts: 0Number of exchange contacts: 1

Read more less

Finder 12VDC adapter 0269012 Series 26 remote control switches Remote control switches for tertiary installations compliant with IEC 23-9 and prCEI C.415 standards. Available in two versions: the single-pole switch (ref. 2601.8024) and 4-sequence switches (ref. 2608.8230). Screwing possible. Powered by an alternating current coil. Adapter modules can be used for DC power supplies. Type of accessory / spare part: RC element (noise suppressor).Rated voltage: 12 V DC, Max ambient temperature: + 40 °C, Operating range: (0.9…1.1)UN.  

Read more less

Schneider-Electric Security Module, Harmony XPS  XPSUVN11AP Safety module, Harmony XPS, zero speed control with timing, 24V, screw terminals Technical dataProduct Range Harmony Safety AutomationProduct Type Safety moduleName Safety Module star-delta motor supplied by variable speed driveMonitoring 3-phase motor supplied by servo driveControlling enegization to open of guard switch type XCSE, XCSLE, >Can reach PL e/category 3 for NO relay contact conforming to ISO 13849-1Can reach SILCL 3 for NO relay contact conforming to IEC 62061Can reach SIL 3 for NO relay contact conforming to IEC 61508 Reliability Data Safety MTTFd > 30 years compliant with ISO 13849-1Dcavg = 98.9 % compliant with ISO 13849-1PFHd = 2.39E-9 1/ h conforming to ISO 13849-1HFT = 1 conforming to IEC 62061PFHd = 2.39E-9 1/h conforming to IEC 62061SFF > 99% conforming to IEC 62061HFT = 1 conforming to IEC 61508-1PFHd = 2.39E-9 1/h conforming to IEC 61508-1SFF > 99% conforming to IEC 61508-1Type = B conforming to IEC 61508-1Product Certifications TÜVcULusNominal Power Voltage [Us] 24 V AC - 15...10 % 24 V DC - 20...20 %Output Type Relay, 1 NO circuits, potential-freeNumber of Additional Circuits 2 static outputsMaximum Consumption In W 2.0 WMaximum Power Consumption In Va5.5 VAInput Voltage 690 VInput Detection Threshold 50 mV65 mV85 mV110 mV140 mV180 mV230 mV300 mV400 mV500 mVTiming 0.5 s1 s2 s3 s5 s8 s12 s20 s35 s60 s Rated Operating Current [Ie] 5 A AC-1 for NO relay contact3 A AC-15 for NO relay contact5 A DC-1 for NO relay contact3 A DC-13 for NO relay contactConventional Thermal Current In Air [Ith]6 A for NO relay output circuit Associated Fuse Rating 6 A gG for relay output compliant with IEC 60947-1Standards IEC 60947-5-1IEC 61508-1 function standard safety functionIEC 61508-2 standard safety functionIEC 61508-3 standard safety functionIEC 61508-4 standard safety functionIEC 61508-5 standard safety function IEC 61508-6 standard safety functionIEC 61508-7 standard safety functionISO 13849-1 standard safety functionIEC 62061 standard safety functionMinimum Output Current 10 mA for relay outputMinimum Output Voltage 5 V for relay outputNominal Insulation Voltage[Ui] 690 V phase to phase (pollution degree 2) conforming to IEC 60947-1400 V phase to earth (pollution degree 2) conforming to IEC 60947-1Rated Impulse Withstand Voltage [Uimp]4 kV overvoltage category II conforming to IEC 60947-1Local Signaling Green LED with power markings for Power ONRed LED with error markings for errorYellow LED with state markings for statusYellow LED with L12 markings for input line comparisonYellow LED with L32 markings for input line comparisonConnections - Terminals Removable screw terminal block solid or flexible cable: 0.2...2.5 mm²Removable screw terminal block flexible with ring nut cable: 0.25...2.5 mm² conductor singleRemovable screw terminal block solid or flexible cable: 0.2...1.5 mm² double conductorRemovable screw terminal block flexible with ring nut cable: 2 x 0.25...1 mm² withoutcable end, with bezelFlexible removable screw terminal block with cable ring: 2 x 0.5...1.5 mm² withcable end, with bezelInstallation Symmetrical DIN rail 35 mmDepth 120 mmHeight 100 mmWidth 22, 5 mmProduct Weight 0.2 kg

Read more less

Pilz PNOZ X3 230VAC 24VDC 3n/o 1n/c 1so 774318  Safety module (standalone), inputs: Single/dual-channel wiring with/without short-circuit detection, outputs: 3 NO, 1 NC, 1 semiconductor, automatic/controlled start, UB 230 V AC/24 V DC, width: 45 mm, integrated screw terminals, emergency stop control, furniture repairers. Technical dataElectrical dataPower supply voltage (V) 230 VType of power supply voltage U1 AC Power consumption AC 5 Supply voltage 2(V) 24 24 Type of supply voltage U2 DC InputsNumber of inputs 2 Semiconductor outputsN. semiconductor outputs 1 Toll. tens. East. DC semicond. -20%/+20% Cat. employment according to EN 60947-1 DC-12 Relay outputsCat. AC/DC use1 Standard EN 60947-4-1 Voltage AC1 cont. safety 240 Corr. max AC1 cont. of safety. 8 Volt. DC1 cont. for sure. 24 Corr. max DC1 safety contact 8 Cat. use AC15/DC13 Standard EN 60947-5-1 Voltage AC15 cont. for sure. 230 Corr. max AC15 safety contact 5 Volt. DC13 cont. for sure. 24 Safety contacts: AC for UL 240 V AC G. P. Safety contacts: Pilot Duty B300, R300 Relay contact material AgSnO2 Suppl. data relay contacts + 0.2 µm Au

Read more less

Pilz PNOZ X2.9P 24VDC 3n/o 1n/c 777300 Safety module (standalone), inputs: Single/dual-channel wiring without short-circuit detection, outputs: 3 NO, 1 NC, manual/automatic/controlled start, UB 24 V DC, width: 22.5 mm , removable screw terminals, emergency stop control, mobile repairs. Technical dataElectrical dataPower supply voltage (V) 24 VType of power supply voltage U1 DC Power consumption DC 2 W InputsNumber of inputs 2 Relay outputsCat. AC/DC use1 Standard EN 60947-4-1 Voltage AC1 cont. safety 240 Corr. max AC1 cont. of safety. 6 Volt. DC1 cont. for sure. 24 Corr. max DC1 safety contact 6 Cat. use AC15/DC13 Standard EN 60947-5-1 Voltage AC15 cont. for sure. 230 Corr. max AC15 safety contact 3 Volt. DC13 cont. for sure. 24 Safety contacts: AC for UL 250 V AC G.U. (same polarity) Safety contacts: Pilot Duty B300, R300 Relay contact material AgSnO2 Supplementary data relay contacts + 0.2 µm Au Environmental dataClimatic stress according to... EN 60068-2-78 Ambient temperature -10 - 55 °CHumidity indication 93 % RH at 40 °C Condensation permitted not permitted EMC acc. standard .... EN 60947-5-1 EN 61000-6-2 EN 61326-3-1 Vibrations acc. Standard ... EN 60068-2-6 Distances in air and surface sec. EN 60947-1

Read more less

Pilz PNOZ X3 110VAC 24VDC 3n/o 1n/c 1so 774314 Safety module (standalone), inputs: Single/dual-channel wiring with/without short-circuit detection, outputs: 3 NO, 1 NC, 1 semiconductor, automatic/controlled start, UB 110 V AC/24 V DC, width: 45 mm, integrated screw terminals, emergency stop control, mobile repairs. Technical dataElectrical dataPower supply voltage (V) 110 VType of power supply voltage U1 AC Power consumption AC 5 Supply voltage 2(V) 24 24 Type of supply voltage U2 DC Tolerance of U2 InputsNumber of inputs 2 Semiconductor outputsN. semiconductor outputs 1 Toll. tens. East. DC semicond. -20%/+20% Cat. employment according to EN 60947-1 DC-12 Relay outputsCat. AC/DC use1 Standard EN 60947-4-1 Voltage AC1 cont. safety 240 Corr. max AC1 cont. of safety. 8 Volt. DC1 cont. for sure. 24 Corr. max DC1 safety contact 8 Cat. use AC15/DC13 Standard EN 60947-5-1 Voltage AC15 cont. for sure. 230 Corr. max AC15 safety contact 5 Volt. DC13 cont. for sure. 24 Safety contacts: AC for UL 240 V AC G. P. Safety contacts: Pilot Duty B300, R300 Relay contact material AgSnO2 Suppl. data relay contacts + 0.2 µm Au Environmental dataClimatic stress according to... EN 60068-2-78 Ambient temperature -20 - 55 °CHumidity indication 93 % RH at 40 °C Condensation permitted not permitted EMC acc. standard .... EN 60947-5-1 EN 61000-6-2 EN 61326-3-1 Vibrations acc. Standard ... EN 60068-2-6 Distances in air and surface sec. EN 60947-1 Overvoltage category III / II Contamination degree 3  

Read more less