FINDER TWILIGHT RELAY 16 A104182300000 Type 10.41 twilight relay for turning on lamps based on the ambient brightness level. Equipped with double output, 1 NO contact 16 A. single-pole interruption (L) 104182300000. Features: Sensitivity adjustment from 1 to 80 lux Cadmium-free contacts Cadmium-free photosensor element (IC photo diode) Circuit with isolation transformer Italian patent – The innovative principle of compensation of the influence of controlled lights, also compatible with slow-start lamps (up to 10 minutes) First 3 operating cycles of the relay without delay when switching on and off, in order to facilitate adjustment operations by the installer Available for 230 and 120 V AC (50/60 Hz) power supply Applications Garden: Night lightingShop windows, illuminated signsLighting for parksPublic lighting: roads and car parks
€37,80
Finder Power supply for bliss 01C0282300300 The typical power supply is characterized by a supply voltage of 110…230 V AC and an output voltage of 3.3 V DC. These characteristics allow you to power the connected BLISS wifi chronothermostat Type 1C.91
€24,20
Finder Socket with compass terminals 9505SPA Socket with socket terminals Mounting: 35 mm blind bar (A): 10 Degree of protection: IP 20 Accessories: EMC signaling and protection modules; 8-pole comb; timer modules; plastic jumper. Relay type 40.51,40.52, 40.61, 40.62. Features: Ratings 10 A – 250 V Dielectric strength between coil and contacts (1.2/50 μs) 6 kV Protection degree IP 20 Ambient temperature °C –40…+70
€5,65
Finder socket with socket terminals 9404sma Socket with socket terminals Mounting: 35 mm blind bar (A): 10 Degree of protection: IP 20 Accessories: Metallic or plastic jumper; 6-pole comb; timer modules; EMC signaling and protection modules. Relay type 55.32, 55.34.Approvals depending on type.
€6,10
FINDER TWO-FUNCTION TIMED MODULE PLUG-IN 863000240000 Two-function and multi-voltage timer module usable with relay and socket type of accessories: timed module with delayed intervention Degree of protection: IP 20 Accessories: Sockets S.90,92,94,95,96,97. Equipped with time scale from 0.05 s to 100 h. Functions: AI: On delay DI: Interval Features: Compliant with standards EN 45545-2 +A1:2016 (protection against fire and smoke), EN 61373 (resistance to shock and vibration, category 1, class B), EN 50155 (resistance to temperature and humidity, class T1) Timer module for 94, 96, 97 series sockets Wide power supply range: 12…24 V AC/DC LED indicator ApplicationsDoor controlManeuvering desksInfotainment message panelsHome appliance management
€26,60
FINDER MODULAR TIMER 16 A 809102400000 Single-function modular timer, asymmetrical intermittent, multivoltage Number of contacts: 1 CO Contact material: AgNi (A): 16 Power supply: AC/DC Volt AC: 240 V. Volt DC: 240 V. suitable for front mounting : yes with plug-in base: no remote control possible: no only suitable for remote control: no flashing function with initial pause, fixed time: no flashing function with initial pulse, fixed time: no with semiconductor output: yes ON-delay function: no feed-through function with on-delay: no star/delta function: no time range: from 0.1 to 86400 s. off-delay function: no pass-through function with off-delay: no Electrical connection: screw connection suitable for mounting on top rail: yes Degree of protection: IP20 Features: Width 17.5 mm Six time scales from 0.1 s to 24 h High input/output isolation Mounting on 35 mm rail (EN 60715) “Blade + cross” casing with regulator, rotary function selectors and time scales, 35 mm bar hook that can be operated with both slotted and Phillips screwdrivers New multivoltage versions with “PWM clever” technology ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, roller shuttersCranesControl panels, distributionDoor opening/closing control
€74,85
FINDER MODULAR MULTIFUNCTION TIMER 24/240V 8A 805102400000 Multifunction and multivoltage timer • Width 17.5 mm • Six time scales from 0.1 s to 24 h • High input/output isolation • Mounting on 35 mm rail (EN 60715) • “blade + cross” casing with regulator, selectors rotary functions and time scales, 35 mm bar hook, operable with both slotted and Phillips screwdrivers • New multi-voltage versions with “PWM clever” technology. FUNCTIONS: AI: On delay; DI: Interval; SW: Symmetrical flashing start ON; BE: Switch-off delay with control signal; CE: On and off delay with control signal; DE: Instantaneous interval with command signal. Functions:– AI: On-delay– DI: Interval– SW: Symmetrical flasher start ON– BE: Off-delay with control signal– CE : On and off delay with control signal – DE: Instantaneous interval with control signal Features: Width 17.5 mm Six time scales from 0.1 s to 24 h High input/output isolation Mounting on 35 mm rail (EN 60715) “Blade + cross” casing with regulator, rotary function selectors and time scales, 35 mm bar hook which can be operated with both slotted and Phillips screwdrivers New multivoltage versions with “PWM clever” technology ApplicationsBuilding automationElevators - liftsAutomation of awnings, shutters, roller shuttersCranesControl panels, distributionOpening doors and gates
€34,15
Finder panel electrical socket 7U0082300010 The Type 7U.00 modular panel electrical socket is the ideal device for providing a safe and approved voltage point inside the electrical panel.Suitable for Schuko + Italian Bipasso plug, available in gray (7U) .00.8.230.00×0) and yellow (7U.00.8.230.00×2). There is also a version characterized by LEDs indicating the presence of voltage in the socket. Other features: – Rated voltage: 230 V AC– Rated current: 16 A– Width 45 mm– Mounting on 35 mm rail (EN 60715) ApplicationsControl panelsControl panels, distribution
€8,70
FINDER Surge Discharger (SPD) TYPE 3 275VAC 6KV 3 7P3682752003 Surge arrester, Type 7P.36 type 3 for systems with TT and TN-S neutralSingle-phase applications for built-in installation (503 boxes) and on DIN rail.Allows easy additional protection against surges in existing wall sockets.Y-shaped configuration with acoustic signaling in case of varistor failure and acoustic test function.Equipped with 3 wires of 150 mm length for a direct connection to the socket terminals . Mounting: apparent/recessed with telecommunications contact: no number of poles: 1 max. permanent AC voltage: 275 V. rated impulse leakage current (8/20) (L-N): 3 kA. nominal voltage AC: 230 V. test class type 3: yes protection level L-N: 1.65 kV. signaling in the luminaire: acoustic Degree of protection: IP20 with anti-interference filter: no Features: Protects sensitive electrical and electronic devices from impulse surges Complies with EN 61643-11:2012 ApplicationsControl panelsSurge protectionApparatus for road use, tunnelsElevator - elevatorsControl panels, distribution
€28,15
Finder surge arrester (SPD) type 2 4 poles 20KA | three-phase 7P2482750020 Surge arresters. Mounting: 35 mm blind bar with telecommunications contact: no number of conductors (excluding earth): 4 size: 4 UM max. permanent AC voltage: 275 V. rated impulse leakage current (8/20): 20 kA. nominal voltage AC: 230 V. test class type 2: yes protection level L-N: 1.2 kV. signaling in the device: optical permanent voltage DC max.: 350 V. Degree of protection: IP20 protection level N-PE: 1.5 kV. integrated auxiliary fuse: no mains form DC: no mains form IT: no mains form TN: no mains form TN-C: no mains form TN-S: yes mains form TT: yes other mains forms: no network form TN-C-S: no max. discharge current (8/20): 40 kA. short circuit resistance (Isccr): 50 kA. Replaceable modules, available with remote contact for signaling the status of the varistor. Features: Suitable for 230 V/400 V systems/applications for protection against induced and switching overvoltages To be installed on the border between the LPZ 1 and LPZ 2 zones Visual indicator of varistor status - working/needs replacement Remote contact signaling of the varistor status. Connector (07P.01) included in the package (depending on versions) Replaceable varistor and spark gap modules Complies with EN 61643-11:2012 Mounting on 35 mm rail (EN 60715) ApplicationsControl panels, distributionApparatus for road use, tunnelsElevators - elevatorsControl panelsSurge protection
€95,90
FINDER Surge arrester (SPD) TYPE 2 | PHOTOVOLTAIC SPD class 2 for photovoltaic 1020VDC 15KA 7P2390000015 Surge arresters. Mounting: 35 mm blind bar with telecommunications contact: no number of conductors (excluding earth): 2 size: 3 UM max. permanent AC voltage: 275 V. rated impulse leakage current (8/20): 20 kA. nominal voltage AC: 230 V. test class type 2: yes protection level L-N: 1.2 kV. signaling in the device: optical continuous voltage DC max.: 350 V. Degree of protection: IP20 max. PV voltage: 420 V. N-PE protection level: 1.2 kV. integrated auxiliary fuse: no mains form DC: no mains form IT: no mains form TN: yes mains form TN-C: yes mains form TN-S: no mains form TT: no other mains forms: no network form TN-C-S: yes max. discharge current (8/20): 30 kA. Features: Protects devices and equipment from direct and/or induced overvoltages.Replaceable modules.Available with remote contact for signaling the status of the varistor. Features: Visual indicator of the status of the varistor – in case of failure Remote contact signaling of the status of the varistor in the event of a fault. Connector (07P.01) included in the package (depending on versions) Replaceable modules Complies with prEN 50539-11:2012 Mounting on 35 mm rail (EN 60715) ApplicationsControl panels, distributionControl panelsSurge protectionAppliances for road use, tunnelsElevators - lifts
€62,00
FINDER SPD limiter class 2 single phase 2P 275VAC 1+1 20KA 7P2282750020 Surge arresters. 7P.22 Type 2 (1 varistor + 1gas spark gap) for single-phase TT and TN-S systems with Neutral. L-N varistor protection + N-PE gas spark gap and with replaceable varistor and spark gap modules.Available with remote contact for signaling the varistor status. Mounting: 35 mm blind bar with telecommunications contact: no number of conductors (excluding earth): 2 size: 2 UM max. permanent AC voltage: 275 V. rated impulse leakage current (8/20): 20 kA. nominal voltage AC: 230 V. test class type 2: yes protection level L-N: 1.2 kV. signaling in the luminaire: optical Protection degree: IP20 N-PE protection level: 1.5 kV. integrated auxiliary fuse: no mains form DC: no mains form IT: no mains form TN: no mains form TN-C: no mains form TN-S: yes mains form TT: yes other mains forms: no form of the TN-C-S network: no max. discharge current (8/20): 40 kA. short circuit resistance (Isccr): 50 kA. Features: Suitable for AC and DC systems/applications for protection against induced and switching overvoltages To be installed on the border between the LPZ 1 and LPZ 2 zones Visual indicator of varistor status - working/needs replacement Remote contact signaling of the varistor status. Connector (07P.01) included in the package (depending on versions) Varistor and spark gap modules, replaceable Complies with EN 61643-11:2012 Mounting on 35 mm rail (EN 60715), 17.5 mm per pole ApplicationsControl panels, distributionControl panelsSurge protectionAppliances for road use, tunnelsElevators - lifts
€54,65
